[PATCH] Add support for GL-AR150
Tim Niemeyer
tim.niemeyer at mastersword.de
Sa Jan 30 10:21:09 CET 2016
Hi Jan
Am Freitag, den 29.01.2016, 20:59 +0100 schrieb Jan Kraus:
> Signed-off-by: Jan Kraus <mayosemmel at gmail.com>
Testen kann ich es leider nicht, aber beim Durchgucken siehts ganz gut
aus.
Reviewed-by: Tim Niemeyer <tim.niemeyer at mastersword.de>
Tim
> ---
> bsp/ar71xx/root_file_system/etc/network.gl-ar150 | 20 ++
> bsp/board_ar71xx.bsp | 2 +
> .../ar71xx-add-support-for-GL-AR150.patch | 293 +++++++++++++++++++++
> buildscript | 3 +
> 4 files changed, 318 insertions(+)
> create mode 100644 bsp/ar71xx/root_file_system/etc/network.gl-ar150
> create mode 100644 build_patches/ar71xx-add-support-for-GL-AR150.patch
>
> diff --git a/bsp/ar71xx/root_file_system/etc/network.gl-ar150 b/bsp/ar71xx/root_file_system/etc/network.gl-ar150
> new file mode 100644
> index 0000000..78dbb09
> --- /dev/null
> +++ b/bsp/ar71xx/root_file_system/etc/network.gl-ar150
> @@ -0,0 +1,20 @@
> +WANDEV=eth0
> +SWITCHDEV=eth1
> +WAN_PORTS=
> +
> +CLIENTIF="eth0.1 w2ap"
> +ETHMESHMAC=eth1
> +ROUTERMAC=eth0
> +
> +. /etc/network.mode
> +
> +if [ "$ETHMODE" = "CLIENT" ] ; then
> + ## Activate Client:
> + CLIENT_PORTS="1 0t"
> + BATMAN_PORTS="0t"
> +else
> + ## Activate BATMAN:
> + BATMAN_PORTS="1 0t"
> + CLIENT_PORTS="0t"
> +fi
> +
> diff --git a/bsp/board_ar71xx.bsp b/bsp/board_ar71xx.bsp
> index 35bcd6b..6cef76b 100644
> --- a/bsp/board_ar71xx.bsp
> +++ b/bsp/board_ar71xx.bsp
> @@ -30,6 +30,8 @@ board_postbuild() {
>
> cp $target/bin/ar71xx/openwrt-ar71xx-generic-tl-wa860re-v1-squashfs-*.bin ./bin/
> cp $target/bin/ar71xx/openwrt-ar71xx-generic-tl-wa850re-v1-squashfs-*.bin ./bin/
> +
> + cp $target/bin/ar71xx/openwrt-ar71xx-generic-gl-ar150-squashfs-*.bin ./bin/
> }
>
> board_clean() {
> diff --git a/build_patches/ar71xx-add-support-for-GL-AR150.patch b/build_patches/ar71xx-add-support-for-GL-AR150.patch
> new file mode 100644
> index 0000000..ec96f81
> --- /dev/null
> +++ b/build_patches/ar71xx-add-support-for-GL-AR150.patch
> @@ -0,0 +1,293 @@
> +--- target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> ++++ target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> +@@ -181,6 +181,10 @@ dlan-pro-1200-ac)
> + ucidef_set_led_trigger_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
> + ;;
> +
> ++gl-ar150)
> ++ ucidef_set_led_wlan "wlan" "WLAN" "gl_ar150:wlan" "phy0tpt"
> ++ ;;
> ++
> + gl-inet)
> + ucidef_set_led_netdev "lan" "LAN" "gl-connect:green:lan" "eth1"
> + ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt"
> +--- target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> ++++ target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> +@@ -375,6 +375,7 @@ dir-505-a1)
> + alfa-ap96 |\
> + alfa-nx |\
> + ap83 |\
> ++gl-ar150 |\
> + gl-inet |\
> + jwap003 |\
> + pb42 |\
> +--- target/linux/ar71xx/base-files/lib/ar71xx.sh
> ++++ target/linux/ar71xx/base-files/lib/ar71xx.sh
> +@@ -454,6 +454,9 @@ ar71xx_board_detect() {
> + name="gl-inet"
> + gl_inet_board_detect
> + ;;
> ++ *"GL AR150")
> ++ name="gl-ar150"
> ++ ;;
> + *"EnGenius EPG5000")
> + name="epg5000"
> + ;;
> +--- target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> ++++ target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +@@ -216,6 +216,7 @@ platform_check_image() {
> + esr900 | \
> + ew-dorin | \
> + ew-dorin-router | \
> ++ gl-ar150 | \
> + hiwifi-hc6361 | \
> + hornet-ub-x2 | \
> + mzk-w04nu | \
> +--- target/linux/ar71xx/config-3.18
> ++++ target/linux/ar71xx/config-3.18
> +@@ -68,6 +68,7 @@ CONFIG_ATH79_MACH_ESR1750=y
> + CONFIG_ATH79_MACH_ESR900=y
> + CONFIG_ATH79_MACH_EW_DORIN=y
> + CONFIG_ATH79_MACH_F9K1115V2=y
> ++CONFIG_ATH79_MACH_GL_AR150=y
> + CONFIG_ATH79_MACH_GL_INET=y
> + CONFIG_ATH79_MACH_GS_MINIBOX_V1=y
> + CONFIG_ATH79_MACH_GS_OOLITE=y
> +--- /dev/null
> ++++ target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c
> +@@ -0,0 +1,125 @@
> ++/*
> ++ * GL_ar150 board support
> ++ *
> ++ * Copyright (C) 2011 dongyuqi <729650915 at qq.com>
> ++ * Copyright (C) 2011-2012 Gabor Juhos <juhosg at openwrt.org>
> ++ * Copyright (C) 2013 alzhao <alzhao at gmail.com>
> ++ * Copyright (C) 2014 Michel Stempin <michel.stempin at wanadoo.fr>
> ++ *
> ++ * This program is free software; you can redistribute it and/or modify it
> ++ * under the terms of the GNU General Public License version 2 as published
> ++ * by the Free Software Foundation.
> ++*/
> ++
> ++#include <linux/gpio.h>
> ++
> ++#include <asm/mach-ath79/ath79.h>
> ++
> ++#include "dev-eth.h"
> ++#include "dev-gpio-buttons.h"
> ++#include "dev-leds-gpio.h"
> ++#include "dev-m25p80.h"
> ++#include "dev-usb.h"
> ++#include "dev-wmac.h"
> ++#include "machtypes.h"
> ++
> ++#define GL_AR150_GPIO_LED_WLAN 0
> ++#define GL_AR150_GPIO_LED_LAN 13
> ++#define GL_AR150_GPIO_LED_WAN 15
> ++
> ++#define GL_AR150_GPIO_BIN_USB 6
> ++#define GL_AR150_GPIO_BTN_MANUAL 7
> ++#define GL_AR150_GPIO_BTN_AUTO 8
> ++#define GL_AR150_GPIO_BTN_RESET 11
> ++
> ++#define GL_AR150_KEYS_POLL_INTERVAL 20 /* msecs */
> ++#define GL_AR150_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR150_KEYS_POLL_INTERVAL)
> ++
> ++#define GL_AR150_MAC0_OFFSET 0x0000
> ++#define GL_AR150_MAC1_OFFSET 0x0000
> ++#define GL_AR150_CALDATA_OFFSET 0x1000
> ++#define GL_AR150_WMAC_MAC_OFFSET 0x0000
> ++
> ++static struct gpio_led gl_ar150_leds_gpio[] __initdata = {
> ++ {
> ++ .name = "gl_ar150:wlan",
> ++ .gpio = GL_AR150_GPIO_LED_WLAN,
> ++ .active_low = 0,
> ++ },
> ++ {
> ++ .name = "gl_ar150:lan",
> ++ .gpio = GL_AR150_GPIO_LED_LAN,
> ++ .active_low = 0,
> ++ },
> ++ {
> ++ .name = "gl_ar150:wan",
> ++ .gpio = GL_AR150_GPIO_LED_WAN,
> ++ .active_low = 0,
> ++ .default_state = 1,
> ++ },
> ++};
> ++
> ++static struct gpio_keys_button gl_ar150_gpio_keys[] __initdata = {
> ++ {
> ++ .desc = "BTN_7",
> ++ .type = EV_KEY,
> ++ .code = BTN_7,
> ++ .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
> ++ .gpio = GL_AR150_GPIO_BTN_MANUAL,
> ++ .active_low = 0,
> ++ },
> ++ {
> ++ .desc = "BTN_8",
> ++ .type = EV_KEY,
> ++ .code = BTN_8,
> ++ .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
> ++ .gpio = GL_AR150_GPIO_BTN_AUTO,
> ++ .active_low = 0,
> ++ },
> ++ {
> ++ .desc = "reset",
> ++ .type = EV_KEY,
> ++ .code = KEY_RESTART,
> ++ .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
> ++ .gpio = GL_AR150_GPIO_BTN_RESET,
> ++ .active_low = 0,
> ++ },
> ++};
> ++
> ++static void __init gl_ar150_setup(void)
> ++{
> ++
> ++ /* ART base address */
> ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
> ++
> ++ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
> ++ ath79_setup_ar933x_phy4_switch(false, false);
> ++
> ++ /* register flash. */
> ++ ath79_register_m25p80(NULL);
> ++
> ++ /* register gpio LEDs and keys */
> ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar150_leds_gpio),
> ++ gl_ar150_leds_gpio);
> ++ ath79_register_gpio_keys_polled(-1, GL_AR150_KEYS_POLL_INTERVAL,
> ++ ARRAY_SIZE(gl_ar150_gpio_keys),
> ++ gl_ar150_gpio_keys);
> ++
> ++ /* enable usb */
> ++ gpio_request_one(GL_AR150_GPIO_BIN_USB,
> ++ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
> ++ "USB power");
> ++ ath79_register_usb();
> ++
> ++ /* register eth0 as WAN, eth1 as LAN */
> ++ ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_AR150_MAC0_OFFSET, 0);
> ++ ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_AR150_MAC1_OFFSET, 0);
> ++ ath79_register_mdio(0, 0x0);
> ++ ath79_register_eth(0);
> ++ ath79_register_eth(1);
> ++
> ++ /* register wireless mac with cal data */
> ++ ath79_register_wmac(art + GL_AR150_CALDATA_OFFSET, art + GL_AR150_WMAC_MAC_OFFSET);
> ++}
> ++
> ++MIPS_MACHINE(ATH79_MACH_GL_AR150, "GL-AR150", "GL AR150",gl_ar150_setup);
> +--- target/linux/ar71xx/generic/profiles/gl-connect.mk
> ++++ /dev/null
> +@@ -1,17 +0,0 @@
> +-#
> +-# Copyright (C) 2014 OpenWrt.org
> +-#
> +-# This is free software, licensed under the GNU General Public License v2.
> +-# See /LICENSE for more information.
> +-#
> +-
> +-define Profile/GLINET
> +- NAME:=GL.iNet
> +- PACKAGES:=kmod-usb-core kmod-usb2
> +-endef
> +-
> +-define Profile/GLINET/Description
> +- Package set optimized for the GL-Connect GL.iNet v1.
> +-endef
> +-
> +-$(eval $(call Profile,GLINET))
> +--- /dev/null
> ++++ target/linux/ar71xx/generic/profiles/gli.mk
> +@@ -0,0 +1,27 @@
> ++#
> ++# Copyright (C) 2013 OpenWrt.org
> ++#
> ++# This is free software, licensed under the GNU General Public License v2.
> ++# See /LICENSE for more information.
> ++#
> ++define Profile/GLINET
> ++ NAME:=GL.iNet 6416
> ++ PACKAGES:=kmod-usb-core kmod-usb2
> ++endef
> ++
> ++define Profile/GLINET/Description
> ++ Package set optimized for the GL-Connect GL.iNet v1.
> ++endef
> ++
> ++$(eval $(call Profile,GLINET))
> ++
> ++define Profile/GL-AR150
> ++ NAME:=GL AR150
> ++ PACKAGES:=kmod-usb-core kmod-usb2
> ++endef
> ++
> ++define Profile/GL-AR150/Description
> ++ Configuration of GL AR150.
> ++endef
> ++
> ++$(eval $(call Profile,GL-AR150))
> +--- target/linux/ar71xx/image/Makefile
> ++++ target/linux/ar71xx/image/Makefile
> +@@ -144,6 +144,14 @@ define Device/weio
> + endef
> + TARGET_DEVICES += weio
> +
> ++define Device/gl-ar150
> ++ BOARDNAME = GL-AR150
> ++ IMAGE_SIZE = 16000k
> ++ CONSOLE = ttyATH0,115200
> ++ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
> ++endef
> ++TARGET_DEVICES += gl-ar150
> ++
> + define Device/wndr3700
> + BOARDNAME = WNDR3700
> + NETGEAR_KERNEL_MAGIC = 0x33373030
> +--- /dev/null
> ++++ target/linux/ar71xx/patches-3.18/911-MIPS-ath79-add-gl_ar150.patch
> +@@ -0,0 +1,39 @@
> ++--- a/arch/mips/ath79/Kconfig
> +++++ b/arch/mips/ath79/Kconfig
> ++@@ -577,6 +577,16 @@ config ATH79_MACH_EL_MINI
> ++ select ATH79_DEV_USB
> ++ select ATH79_DEV_WMAC
> ++
> +++config ATH79_MACH_GL_AR150
> +++ bool "GL AR150 support"
> +++ select SOC_AR933X
> +++ select ATH79_DEV_ETH
> +++ select ATH79_DEV_GPIO_BUTTONS
> +++ select ATH79_DEV_LEDS_GPIO
> +++ select ATH79_DEV_M25P80
> +++ select ATH79_DEV_USB
> +++ select ATH79_DEV_WMAC
> +++
> ++ config ATH79_MACH_GL_INET
> ++ bool "GL-INET support"
> ++ select SOC_AR933X
> ++--- a/arch/mips/ath79/Makefile
> +++++ b/arch/mips/ath79/Makefile
> ++@@ -83,6 +83,7 @@ obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach
> ++ obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o
> ++ obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
> ++ obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
> +++obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o
> ++ obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
> ++ obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o
> ++ obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
> ++--- a/arch/mips/ath79/machtypes.h
> +++++ b/arch/mips/ath79/machtypes.h
> ++@@ -72,6 +72,7 @@ enum ath79_mach_type {
> ++ ATH79_MACH_ESR1750, /* EnGenius ESR1750 */
> ++ ATH79_MACH_EPG5000, /* EnGenius EPG5000 */
> ++ ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
> +++ ATH79_MACH_GL_AR150, /* GL-AR150 support */
> ++ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
> ++ ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */
> ++ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
> +
> diff --git a/buildscript b/buildscript
> index f159f26..9154427 100755
> --- a/buildscript
> +++ b/buildscript
> @@ -164,6 +164,9 @@ prepare() {
> # set default password to 'ffol'
> patch -p0 -d "$target" -i "$PWD"/build_patches/set_root_password.patch
>
> + #add Support for GL-AR150 see also http://git.openwrt.org/?p=openwrt.git;a=commit;h=8211e81bce57392635fa3ad6572514387118e4a5
> + patch -p0 -d "$target" -i "$PWD"/build_patches/ar71xx-add-support-for-GL-AR150.patch
> +
> #saves ~200MB for each build
> test -d ./src/dl || mkdir ./src/dl
> ln -s ../../src/dl "$target"/dl
> --
> 2.1.4
>
-------------- nächster Teil --------------
Ein Dateianhang mit Binärdaten wurde abgetrennt...
Dateiname : signature.asc
Dateityp : application/pgp-signature
Dateigröße : 473 bytes
Beschreibung: This is a digitally signed message part
URL : <http://lists.freifunk.net/pipermail/franken-dev-freifunk.net/attachments/20160130/b1f78bb4/attachment-0002.sig>
Mehr Informationen über die Mailingliste franken-dev