[PATCH] Add support for GL-AR150
Jan Kraus
mayosemmel at googlemail.com
Fr Jan 29 20:59:20 CET 2016
Signed-off-by: Jan Kraus <mayosemmel at gmail.com>
---
bsp/ar71xx/root_file_system/etc/network.gl-ar150 | 20 ++
bsp/board_ar71xx.bsp | 2 +
.../ar71xx-add-support-for-GL-AR150.patch | 293 +++++++++++++++++++++
buildscript | 3 +
4 files changed, 318 insertions(+)
create mode 100644 bsp/ar71xx/root_file_system/etc/network.gl-ar150
create mode 100644 build_patches/ar71xx-add-support-for-GL-AR150.patch
diff --git a/bsp/ar71xx/root_file_system/etc/network.gl-ar150 b/bsp/ar71xx/root_file_system/etc/network.gl-ar150
new file mode 100644
index 0000000..78dbb09
--- /dev/null
+++ b/bsp/ar71xx/root_file_system/etc/network.gl-ar150
@@ -0,0 +1,20 @@
+WANDEV=eth0
+SWITCHDEV=eth1
+WAN_PORTS=
+
+CLIENTIF="eth0.1 w2ap"
+ETHMESHMAC=eth1
+ROUTERMAC=eth0
+
+. /etc/network.mode
+
+if [ "$ETHMODE" = "CLIENT" ] ; then
+ ## Activate Client:
+ CLIENT_PORTS="1 0t"
+ BATMAN_PORTS="0t"
+else
+ ## Activate BATMAN:
+ BATMAN_PORTS="1 0t"
+ CLIENT_PORTS="0t"
+fi
+
diff --git a/bsp/board_ar71xx.bsp b/bsp/board_ar71xx.bsp
index 35bcd6b..6cef76b 100644
--- a/bsp/board_ar71xx.bsp
+++ b/bsp/board_ar71xx.bsp
@@ -30,6 +30,8 @@ board_postbuild() {
cp $target/bin/ar71xx/openwrt-ar71xx-generic-tl-wa860re-v1-squashfs-*.bin ./bin/
cp $target/bin/ar71xx/openwrt-ar71xx-generic-tl-wa850re-v1-squashfs-*.bin ./bin/
+
+ cp $target/bin/ar71xx/openwrt-ar71xx-generic-gl-ar150-squashfs-*.bin ./bin/
}
board_clean() {
diff --git a/build_patches/ar71xx-add-support-for-GL-AR150.patch b/build_patches/ar71xx-add-support-for-GL-AR150.patch
new file mode 100644
index 0000000..ec96f81
--- /dev/null
+++ b/build_patches/ar71xx-add-support-for-GL-AR150.patch
@@ -0,0 +1,293 @@
+--- target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
++++ target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+@@ -181,6 +181,10 @@ dlan-pro-1200-ac)
+ ucidef_set_led_trigger_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
+ ;;
+
++gl-ar150)
++ ucidef_set_led_wlan "wlan" "WLAN" "gl_ar150:wlan" "phy0tpt"
++ ;;
++
+ gl-inet)
+ ucidef_set_led_netdev "lan" "LAN" "gl-connect:green:lan" "eth1"
+ ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt"
+--- target/linux/ar71xx/base-files/etc/uci-defaults/02_network
++++ target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+@@ -375,6 +375,7 @@ dir-505-a1)
+ alfa-ap96 |\
+ alfa-nx |\
+ ap83 |\
++gl-ar150 |\
+ gl-inet |\
+ jwap003 |\
+ pb42 |\
+--- target/linux/ar71xx/base-files/lib/ar71xx.sh
++++ target/linux/ar71xx/base-files/lib/ar71xx.sh
+@@ -454,6 +454,9 @@ ar71xx_board_detect() {
+ name="gl-inet"
+ gl_inet_board_detect
+ ;;
++ *"GL AR150")
++ name="gl-ar150"
++ ;;
+ *"EnGenius EPG5000")
+ name="epg5000"
+ ;;
+--- target/linux/ar71xx/base-files/lib/upgrade/platform.sh
++++ target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+@@ -216,6 +216,7 @@ platform_check_image() {
+ esr900 | \
+ ew-dorin | \
+ ew-dorin-router | \
++ gl-ar150 | \
+ hiwifi-hc6361 | \
+ hornet-ub-x2 | \
+ mzk-w04nu | \
+--- target/linux/ar71xx/config-3.18
++++ target/linux/ar71xx/config-3.18
+@@ -68,6 +68,7 @@ CONFIG_ATH79_MACH_ESR1750=y
+ CONFIG_ATH79_MACH_ESR900=y
+ CONFIG_ATH79_MACH_EW_DORIN=y
+ CONFIG_ATH79_MACH_F9K1115V2=y
++CONFIG_ATH79_MACH_GL_AR150=y
+ CONFIG_ATH79_MACH_GL_INET=y
+ CONFIG_ATH79_MACH_GS_MINIBOX_V1=y
+ CONFIG_ATH79_MACH_GS_OOLITE=y
+--- /dev/null
++++ target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c
+@@ -0,0 +1,125 @@
++/*
++ * GL_ar150 board support
++ *
++ * Copyright (C) 2011 dongyuqi <729650915 at qq.com>
++ * Copyright (C) 2011-2012 Gabor Juhos <juhosg at openwrt.org>
++ * Copyright (C) 2013 alzhao <alzhao at gmail.com>
++ * Copyright (C) 2014 Michel Stempin <michel.stempin at wanadoo.fr>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++*/
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define GL_AR150_GPIO_LED_WLAN 0
++#define GL_AR150_GPIO_LED_LAN 13
++#define GL_AR150_GPIO_LED_WAN 15
++
++#define GL_AR150_GPIO_BIN_USB 6
++#define GL_AR150_GPIO_BTN_MANUAL 7
++#define GL_AR150_GPIO_BTN_AUTO 8
++#define GL_AR150_GPIO_BTN_RESET 11
++
++#define GL_AR150_KEYS_POLL_INTERVAL 20 /* msecs */
++#define GL_AR150_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR150_KEYS_POLL_INTERVAL)
++
++#define GL_AR150_MAC0_OFFSET 0x0000
++#define GL_AR150_MAC1_OFFSET 0x0000
++#define GL_AR150_CALDATA_OFFSET 0x1000
++#define GL_AR150_WMAC_MAC_OFFSET 0x0000
++
++static struct gpio_led gl_ar150_leds_gpio[] __initdata = {
++ {
++ .name = "gl_ar150:wlan",
++ .gpio = GL_AR150_GPIO_LED_WLAN,
++ .active_low = 0,
++ },
++ {
++ .name = "gl_ar150:lan",
++ .gpio = GL_AR150_GPIO_LED_LAN,
++ .active_low = 0,
++ },
++ {
++ .name = "gl_ar150:wan",
++ .gpio = GL_AR150_GPIO_LED_WAN,
++ .active_low = 0,
++ .default_state = 1,
++ },
++};
++
++static struct gpio_keys_button gl_ar150_gpio_keys[] __initdata = {
++ {
++ .desc = "BTN_7",
++ .type = EV_KEY,
++ .code = BTN_7,
++ .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = GL_AR150_GPIO_BTN_MANUAL,
++ .active_low = 0,
++ },
++ {
++ .desc = "BTN_8",
++ .type = EV_KEY,
++ .code = BTN_8,
++ .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = GL_AR150_GPIO_BTN_AUTO,
++ .active_low = 0,
++ },
++ {
++ .desc = "reset",
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = GL_AR150_GPIO_BTN_RESET,
++ .active_low = 0,
++ },
++};
++
++static void __init gl_ar150_setup(void)
++{
++
++ /* ART base address */
++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++ ath79_setup_ar933x_phy4_switch(false, false);
++
++ /* register flash. */
++ ath79_register_m25p80(NULL);
++
++ /* register gpio LEDs and keys */
++ ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar150_leds_gpio),
++ gl_ar150_leds_gpio);
++ ath79_register_gpio_keys_polled(-1, GL_AR150_KEYS_POLL_INTERVAL,
++ ARRAY_SIZE(gl_ar150_gpio_keys),
++ gl_ar150_gpio_keys);
++
++ /* enable usb */
++ gpio_request_one(GL_AR150_GPIO_BIN_USB,
++ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++ "USB power");
++ ath79_register_usb();
++
++ /* register eth0 as WAN, eth1 as LAN */
++ ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_AR150_MAC0_OFFSET, 0);
++ ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_AR150_MAC1_OFFSET, 0);
++ ath79_register_mdio(0, 0x0);
++ ath79_register_eth(0);
++ ath79_register_eth(1);
++
++ /* register wireless mac with cal data */
++ ath79_register_wmac(art + GL_AR150_CALDATA_OFFSET, art + GL_AR150_WMAC_MAC_OFFSET);
++}
++
++MIPS_MACHINE(ATH79_MACH_GL_AR150, "GL-AR150", "GL AR150",gl_ar150_setup);
+--- target/linux/ar71xx/generic/profiles/gl-connect.mk
++++ /dev/null
+@@ -1,17 +0,0 @@
+-#
+-# Copyright (C) 2014 OpenWrt.org
+-#
+-# This is free software, licensed under the GNU General Public License v2.
+-# See /LICENSE for more information.
+-#
+-
+-define Profile/GLINET
+- NAME:=GL.iNet
+- PACKAGES:=kmod-usb-core kmod-usb2
+-endef
+-
+-define Profile/GLINET/Description
+- Package set optimized for the GL-Connect GL.iNet v1.
+-endef
+-
+-$(eval $(call Profile,GLINET))
+--- /dev/null
++++ target/linux/ar71xx/generic/profiles/gli.mk
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2013 OpenWrt.org
++#
++# This is free software, licensed under the GNU General Public License v2.
++# See /LICENSE for more information.
++#
++define Profile/GLINET
++ NAME:=GL.iNet 6416
++ PACKAGES:=kmod-usb-core kmod-usb2
++endef
++
++define Profile/GLINET/Description
++ Package set optimized for the GL-Connect GL.iNet v1.
++endef
++
++$(eval $(call Profile,GLINET))
++
++define Profile/GL-AR150
++ NAME:=GL AR150
++ PACKAGES:=kmod-usb-core kmod-usb2
++endef
++
++define Profile/GL-AR150/Description
++ Configuration of GL AR150.
++endef
++
++$(eval $(call Profile,GL-AR150))
+--- target/linux/ar71xx/image/Makefile
++++ target/linux/ar71xx/image/Makefile
+@@ -144,6 +144,14 @@ define Device/weio
+ endef
+ TARGET_DEVICES += weio
+
++define Device/gl-ar150
++ BOARDNAME = GL-AR150
++ IMAGE_SIZE = 16000k
++ CONSOLE = ttyATH0,115200
++ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
++endef
++TARGET_DEVICES += gl-ar150
++
+ define Device/wndr3700
+ BOARDNAME = WNDR3700
+ NETGEAR_KERNEL_MAGIC = 0x33373030
+--- /dev/null
++++ target/linux/ar71xx/patches-3.18/911-MIPS-ath79-add-gl_ar150.patch
+@@ -0,0 +1,39 @@
++--- a/arch/mips/ath79/Kconfig
+++++ b/arch/mips/ath79/Kconfig
++@@ -577,6 +577,16 @@ config ATH79_MACH_EL_MINI
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+++config ATH79_MACH_GL_AR150
+++ bool "GL AR150 support"
+++ select SOC_AR933X
+++ select ATH79_DEV_ETH
+++ select ATH79_DEV_GPIO_BUTTONS
+++ select ATH79_DEV_LEDS_GPIO
+++ select ATH79_DEV_M25P80
+++ select ATH79_DEV_USB
+++ select ATH79_DEV_WMAC
+++
++ config ATH79_MACH_GL_INET
++ bool "GL-INET support"
++ select SOC_AR933X
++--- a/arch/mips/ath79/Makefile
+++++ b/arch/mips/ath79/Makefile
++@@ -83,6 +83,7 @@ obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach
++ obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o
++ obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
++ obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
+++obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o
++ obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
++ obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o
++ obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
++--- a/arch/mips/ath79/machtypes.h
+++++ b/arch/mips/ath79/machtypes.h
++@@ -72,6 +72,7 @@ enum ath79_mach_type {
++ ATH79_MACH_ESR1750, /* EnGenius ESR1750 */
++ ATH79_MACH_EPG5000, /* EnGenius EPG5000 */
++ ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
+++ ATH79_MACH_GL_AR150, /* GL-AR150 support */
++ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
++ ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */
++ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
+
diff --git a/buildscript b/buildscript
index f159f26..9154427 100755
--- a/buildscript
+++ b/buildscript
@@ -164,6 +164,9 @@ prepare() {
# set default password to 'ffol'
patch -p0 -d "$target" -i "$PWD"/build_patches/set_root_password.patch
+ #add Support for GL-AR150 see also http://git.openwrt.org/?p=openwrt.git;a=commit;h=8211e81bce57392635fa3ad6572514387118e4a5
+ patch -p0 -d "$target" -i "$PWD"/build_patches/ar71xx-add-support-for-GL-AR150.patch
+
#saves ~200MB for each build
test -d ./src/dl || mkdir ./src/dl
ln -s ../../src/dl "$target"/dl
--
2.1.4
Mehr Informationen über die Mailingliste franken-dev