[PATCH] Add support for GL-AR150
Tobias Klaus
tk+ff at meskal.net
So Jan 31 18:15:37 CET 2016
Hallo,
On Samstag, 30. Januar 2016 10:21:09 CET Tim Niemeyer wrote:
> Hi Jan
>
> Am Freitag, den 29.01.2016, 20:59 +0100 schrieb Jan Kraus:
> > Signed-off-by: Jan Kraus <mayosemmel at gmail.com>
>
> Testen kann ich es leider nicht, aber beim Durchgucken siehts ganz gut
> aus.
Geht mir genauso. Deswegen reviewed by und ich hab ihn gleich hochgeladen.
Grüße
Tobias
>
> Reviewed-by: Tim Niemeyer <tim.niemeyer at mastersword.de>
>
> Tim
>
> > ---
> >
> > bsp/ar71xx/root_file_system/etc/network.gl-ar150 | 20 ++
> > bsp/board_ar71xx.bsp | 2 +
> > .../ar71xx-add-support-for-GL-AR150.patch | 293
> > +++++++++++++++++++++ buildscript
> > | 3 +
> > 4 files changed, 318 insertions(+)
> > create mode 100644 bsp/ar71xx/root_file_system/etc/network.gl-ar150
> > create mode 100644 build_patches/ar71xx-add-support-for-GL-AR150.patch
> >
> > diff --git a/bsp/ar71xx/root_file_system/etc/network.gl-ar150
> > b/bsp/ar71xx/root_file_system/etc/network.gl-ar150 new file mode 100644
> > index 0000000..78dbb09
> > --- /dev/null
> > +++ b/bsp/ar71xx/root_file_system/etc/network.gl-ar150
> > @@ -0,0 +1,20 @@
> > +WANDEV=eth0
> > +SWITCHDEV=eth1
> > +WAN_PORTS=
> > +
> > +CLIENTIF="eth0.1 w2ap"
> > +ETHMESHMAC=eth1
> > +ROUTERMAC=eth0
> > +
> > +. /etc/network.mode
> > +
> > +if [ "$ETHMODE" = "CLIENT" ] ; then
> > + ## Activate Client:
> > + CLIENT_PORTS="1 0t"
> > + BATMAN_PORTS="0t"
> > +else
> > + ## Activate BATMAN:
> > + BATMAN_PORTS="1 0t"
> > + CLIENT_PORTS="0t"
> > +fi
> > +
> > diff --git a/bsp/board_ar71xx.bsp b/bsp/board_ar71xx.bsp
> > index 35bcd6b..6cef76b 100644
> > --- a/bsp/board_ar71xx.bsp
> > +++ b/bsp/board_ar71xx.bsp
> > @@ -30,6 +30,8 @@ board_postbuild() {
> >
> > cp
> > $target/bin/ar71xx/openwrt-ar71xx-generic-tl-wa860re-v1-squashfs-*.b
> > in ./bin/ cp
> > $target/bin/ar71xx/openwrt-ar71xx-generic-tl-wa850re-v1-squashfs-*.b
> > in ./bin/>
> > +
> > + cp $target/bin/ar71xx/openwrt-ar71xx-generic-gl-ar150-squashfs-*.bin
> > ./bin/>
> > }
> >
> > board_clean() {
> >
> > diff --git a/build_patches/ar71xx-add-support-for-GL-AR150.patch
> > b/build_patches/ar71xx-add-support-for-GL-AR150.patch new file mode
> > 100644
> > index 0000000..ec96f81
> > --- /dev/null
> > +++ b/build_patches/ar71xx-add-support-for-GL-AR150.patch
> > @@ -0,0 +1,293 @@
> > +--- target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> > ++++ target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> > +@@ -181,6 +181,10 @@ dlan-pro-1200-ac)
> > + ucidef_set_led_trigger_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
> > + ;;
> > +
> > ++gl-ar150)
> > ++ ucidef_set_led_wlan "wlan" "WLAN" "gl_ar150:wlan" "phy0tpt"
> > ++ ;;
> > ++
> > + gl-inet)
> > + ucidef_set_led_netdev "lan" "LAN" "gl-connect:green:lan" "eth1"
> > + ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt"
> > +--- target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> > ++++ target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> > +@@ -375,6 +375,7 @@ dir-505-a1)
> > + alfa-ap96 |\
> > + alfa-nx |\
> > + ap83 |\
> > ++gl-ar150 |\
> > + gl-inet |\
> > + jwap003 |\
> > + pb42 |\
> > +--- target/linux/ar71xx/base-files/lib/ar71xx.sh
> > ++++ target/linux/ar71xx/base-files/lib/ar71xx.sh
> > +@@ -454,6 +454,9 @@ ar71xx_board_detect() {
> > + name="gl-inet"
> > + gl_inet_board_detect
> > + ;;
> > ++ *"GL AR150")
> > ++ name="gl-ar150"
> > ++ ;;
> > + *"EnGenius EPG5000")
> > + name="epg5000"
> > + ;;
> > +--- target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > ++++ target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > +@@ -216,6 +216,7 @@ platform_check_image() {
> > + esr900 | \
> > + ew-dorin | \
> > + ew-dorin-router | \
> > ++ gl-ar150 | \
> > + hiwifi-hc6361 | \
> > + hornet-ub-x2 | \
> > + mzk-w04nu | \
> > +--- target/linux/ar71xx/config-3.18
> > ++++ target/linux/ar71xx/config-3.18
> > +@@ -68,6 +68,7 @@ CONFIG_ATH79_MACH_ESR1750=y
> > + CONFIG_ATH79_MACH_ESR900=y
> > + CONFIG_ATH79_MACH_EW_DORIN=y
> > + CONFIG_ATH79_MACH_F9K1115V2=y
> > ++CONFIG_ATH79_MACH_GL_AR150=y
> > + CONFIG_ATH79_MACH_GL_INET=y
> > + CONFIG_ATH79_MACH_GS_MINIBOX_V1=y
> > + CONFIG_ATH79_MACH_GS_OOLITE=y
> > +--- /dev/null
> > ++++ target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c
> > +@@ -0,0 +1,125 @@
> > ++/*
> > ++ * GL_ar150 board support
> > ++ *
> > ++ * Copyright (C) 2011 dongyuqi <729650915 at qq.com>
> > ++ * Copyright (C) 2011-2012 Gabor Juhos <juhosg at openwrt.org>
> > ++ * Copyright (C) 2013 alzhao <alzhao at gmail.com>
> > ++ * Copyright (C) 2014 Michel Stempin <michel.stempin at wanadoo.fr>
> > ++ *
> > ++ * This program is free software; you can redistribute it and/or modify
> > it ++ * under the terms of the GNU General Public License version 2 as
> > published ++ * by the Free Software Foundation.
> > ++*/
> > ++
> > ++#include <linux/gpio.h>
> > ++
> > ++#include <asm/mach-ath79/ath79.h>
> > ++
> > ++#include "dev-eth.h"
> > ++#include "dev-gpio-buttons.h"
> > ++#include "dev-leds-gpio.h"
> > ++#include "dev-m25p80.h"
> > ++#include "dev-usb.h"
> > ++#include "dev-wmac.h"
> > ++#include "machtypes.h"
> > ++
> > ++#define GL_AR150_GPIO_LED_WLAN 0
> > ++#define GL_AR150_GPIO_LED_LAN 13
> > ++#define GL_AR150_GPIO_LED_WAN 15
> > ++
> > ++#define GL_AR150_GPIO_BIN_USB 6
> > ++#define GL_AR150_GPIO_BTN_MANUAL 7
> > ++#define GL_AR150_GPIO_BTN_AUTO 8
> > ++#define GL_AR150_GPIO_BTN_RESET 11
> > ++
> > ++#define GL_AR150_KEYS_POLL_INTERVAL 20 /* msecs */
> > ++#define GL_AR150_KEYS_DEBOUNCE_INTERVAL (3 *
> > GL_AR150_KEYS_POLL_INTERVAL)
> > ++
> > ++#define GL_AR150_MAC0_OFFSET 0x0000
> > ++#define GL_AR150_MAC1_OFFSET 0x0000
> > ++#define GL_AR150_CALDATA_OFFSET 0x1000
> > ++#define GL_AR150_WMAC_MAC_OFFSET 0x0000
> > ++
> > ++static struct gpio_led gl_ar150_leds_gpio[] __initdata = {
> > ++ {
> > ++ .name = "gl_ar150:wlan",
> > ++ .gpio = GL_AR150_GPIO_LED_WLAN,
> > ++ .active_low = 0,
> > ++ },
> > ++ {
> > ++ .name = "gl_ar150:lan",
> > ++ .gpio = GL_AR150_GPIO_LED_LAN,
> > ++ .active_low = 0,
> > ++ },
> > ++ {
> > ++ .name = "gl_ar150:wan",
> > ++ .gpio = GL_AR150_GPIO_LED_WAN,
> > ++ .active_low = 0,
> > ++ .default_state = 1,
> > ++ },
> > ++};
> > ++
> > ++static struct gpio_keys_button gl_ar150_gpio_keys[] __initdata = {
> > ++ {
> > ++ .desc = "BTN_7",
> > ++ .type = EV_KEY,
> > ++ .code = BTN_7,
> > ++ .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
> > ++ .gpio = GL_AR150_GPIO_BTN_MANUAL,
> > ++ .active_low = 0,
> > ++ },
> > ++ {
> > ++ .desc = "BTN_8",
> > ++ .type = EV_KEY,
> > ++ .code = BTN_8,
> > ++ .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
> > ++ .gpio = GL_AR150_GPIO_BTN_AUTO,
> > ++ .active_low = 0,
> > ++ },
> > ++ {
> > ++ .desc = "reset",
> > ++ .type = EV_KEY,
> > ++ .code = KEY_RESTART,
> > ++ .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
> > ++ .gpio = GL_AR150_GPIO_BTN_RESET,
> > ++ .active_low = 0,
> > ++ },
> > ++};
> > ++
> > ++static void __init gl_ar150_setup(void)
> > ++{
> > ++
> > ++ /* ART base address */
> > ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
> > ++
> > ++ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
> > ++ ath79_setup_ar933x_phy4_switch(false, false);
> > ++
> > ++ /* register flash. */
> > ++ ath79_register_m25p80(NULL);
> > ++
> > ++ /* register gpio LEDs and keys */
> > ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar150_leds_gpio),
> > ++ gl_ar150_leds_gpio);
> > ++ ath79_register_gpio_keys_polled(-1, GL_AR150_KEYS_POLL_INTERVAL,
> > ++ ARRAY_SIZE(gl_ar150_gpio_keys),
> > ++ gl_ar150_gpio_keys);
> > ++
> > ++ /* enable usb */
> > ++ gpio_request_one(GL_AR150_GPIO_BIN_USB,
> > ++ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
> > ++ "USB power");
> > ++ ath79_register_usb();
> > ++
> > ++ /* register eth0 as WAN, eth1 as LAN */
> > ++ ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_AR150_MAC0_OFFSET, 0);
> > ++ ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_AR150_MAC1_OFFSET, 0);
> > ++ ath79_register_mdio(0, 0x0);
> > ++ ath79_register_eth(0);
> > ++ ath79_register_eth(1);
> > ++
> > ++ /* register wireless mac with cal data */
> > ++ ath79_register_wmac(art + GL_AR150_CALDATA_OFFSET, art +
> > GL_AR150_WMAC_MAC_OFFSET); ++}
> > ++
> > ++MIPS_MACHINE(ATH79_MACH_GL_AR150, "GL-AR150", "GL
> > AR150",gl_ar150_setup);
> > +--- target/linux/ar71xx/generic/profiles/gl-connect.mk
> > ++++ /dev/null
> > +@@ -1,17 +0,0 @@
> > +-#
> > +-# Copyright (C) 2014 OpenWrt.org
> > +-#
> > +-# This is free software, licensed under the GNU General Public License
> > v2. +-# See /LICENSE for more information.
> > +-#
> > +-
> > +-define Profile/GLINET
> > +- NAME:=GL.iNet
> > +- PACKAGES:=kmod-usb-core kmod-usb2
> > +-endef
> > +-
> > +-define Profile/GLINET/Description
> > +- Package set optimized for the GL-Connect GL.iNet v1.
> > +-endef
> > +-
> > +-$(eval $(call Profile,GLINET))
> > +--- /dev/null
> > ++++ target/linux/ar71xx/generic/profiles/gli.mk
> > +@@ -0,0 +1,27 @@
> > ++#
> > ++# Copyright (C) 2013 OpenWrt.org
> > ++#
> > ++# This is free software, licensed under the GNU General Public License
> > v2. ++# See /LICENSE for more information.
> > ++#
> > ++define Profile/GLINET
> > ++ NAME:=GL.iNet 6416
> > ++ PACKAGES:=kmod-usb-core kmod-usb2
> > ++endef
> > ++
> > ++define Profile/GLINET/Description
> > ++ Package set optimized for the GL-Connect GL.iNet v1.
> > ++endef
> > ++
> > ++$(eval $(call Profile,GLINET))
> > ++
> > ++define Profile/GL-AR150
> > ++ NAME:=GL AR150
> > ++ PACKAGES:=kmod-usb-core kmod-usb2
> > ++endef
> > ++
> > ++define Profile/GL-AR150/Description
> > ++ Configuration of GL AR150.
> > ++endef
> > ++
> > ++$(eval $(call Profile,GL-AR150))
> > +--- target/linux/ar71xx/image/Makefile
> > ++++ target/linux/ar71xx/image/Makefile
> > +@@ -144,6 +144,14 @@ define Device/weio
> > + endef
> > + TARGET_DEVICES += weio
> > +
> > ++define Device/gl-ar150
> > ++ BOARDNAME = GL-AR150
> > ++ IMAGE_SIZE = 16000k
> > ++ CONSOLE = ttyATH0,115200
> > ++ MTDPARTS =
> > spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
> > ++endef
> > ++TARGET_DEVICES += gl-ar150
> > ++
> > + define Device/wndr3700
> > + BOARDNAME = WNDR3700
> > + NETGEAR_KERNEL_MAGIC = 0x33373030
> > +--- /dev/null
> > ++++ target/linux/ar71xx/patches-3.18/911-MIPS-ath79-add-gl_ar150.patch
> > +@@ -0,0 +1,39 @@
> > ++--- a/arch/mips/ath79/Kconfig
> > +++++ b/arch/mips/ath79/Kconfig
> > ++@@ -577,6 +577,16 @@ config ATH79_MACH_EL_MINI
> > ++ select ATH79_DEV_USB
> > ++ select ATH79_DEV_WMAC
> > ++
> > +++config ATH79_MACH_GL_AR150
> > +++ bool "GL AR150 support"
> > +++ select SOC_AR933X
> > +++ select ATH79_DEV_ETH
> > +++ select ATH79_DEV_GPIO_BUTTONS
> > +++ select ATH79_DEV_LEDS_GPIO
> > +++ select ATH79_DEV_M25P80
> > +++ select ATH79_DEV_USB
> > +++ select ATH79_DEV_WMAC
> > +++
> > ++ config ATH79_MACH_GL_INET
> > ++ bool "GL-INET support"
> > ++ select SOC_AR933X
> > ++--- a/arch/mips/ath79/Makefile
> > +++++ b/arch/mips/ath79/Makefile
> > ++@@ -83,6 +83,7 @@ obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach
> > ++ obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o
> > ++ obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
> > ++ obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
> > +++obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o
> > ++ obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
> > ++ obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o
> > ++ obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
> > ++--- a/arch/mips/ath79/machtypes.h
> > +++++ b/arch/mips/ath79/machtypes.h
> > ++@@ -72,6 +72,7 @@ enum ath79_mach_type {
> > ++ ATH79_MACH_ESR1750, /* EnGenius ESR1750 */
> > ++ ATH79_MACH_EPG5000, /* EnGenius EPG5000 */
> > ++ ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
> > +++ ATH79_MACH_GL_AR150, /* GL-AR150 support */
> > ++ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
> > ++ ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */
> > ++ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
> > +
> > diff --git a/buildscript b/buildscript
> > index f159f26..9154427 100755
> > --- a/buildscript
> > +++ b/buildscript
> > @@ -164,6 +164,9 @@ prepare() {
> >
> > # set default password to 'ffol'
> > patch -p0 -d "$target" -i
> > "$PWD"/build_patches/set_root_password.patch
> >
> > + #add Support for GL-AR150 see also
> > http://git.openwrt.org/?p=openwrt.git;a=commit;h=8211e81bce57392635fa3ad6
> > 572514387118e4a5 + patch -p0 -d "$target" -i
> > "$PWD"/build_patches/ar71xx-add-support-for-GL-AR150.patch +
> >
> > #saves ~200MB for each build
> > test -d ./src/dl || mkdir ./src/dl
> > ln -s ../../src/dl "$target"/dl
Mehr Informationen über die Mailingliste franken-dev