[WLANware] batman-adv
Moritz Warning
moritzwarning at web.de
Fri Jul 26 02:50:19 CEST 2013
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
No more Internet for you until you are sober again! :>
have fun,
mwarning :)
On 07/26/2013 02:41 AM, Holger Schmermbeck wrote:
> Of course, you can post in English. Your German is fucking awesome (with twenty dollar in my pocket...) sry for my English, but I'm in club and drunken. ;-)
>
> Von meinem iPhone gesendet
>
> Am 26.07.2013 um 02:08 schrieb brent <bts at project-phree.org>:
>
>> Grüße!
>>
>> Ich bin in Philadelphia, Pennsylvania in den USA. Ich für die schlechte
>> Übersetzung, da ich nicht Deutsch sprechen (wenn bevorzugt, kann ich in
>> Englisch zu verfassen) entschuldigen.
>>
>> Ich gründe eine batman-adv Mesh-Netzwerk. Technische Daten:
>>
>> -TP-Link WR1043ND v1.11
>> -Custom OpenWRT (basierend auf Attitude Adjustment, 12.09 r37151)
>> -batman-adv v.2013.1.0
>> - (Vielzahl von externen Antennen)
>>
>> Ich hatte einige Fragen zur Konfiguration, wie es scheint, kann ich
>> nicht bekommen batctl Schnittstellen zur Inbetriebnahme der Geräte
>> hinzuzufügen. Manuelles Hinzufügen ihnen jedoch erlaubt es mir, ein
>> Mesh-Netzwerk zwischen zwei Knoten zu bauen.
>>
>> Der AP beginnt und das Netz ESSID tut als gut, aber ...
>>
>> Relevante Konfigurationsdateien:
>>
>> root at phreeN:/etc/config# egrep -v '^\ .*#|^#' batman-adv
>> config 'mesh' 'bat0'
>> option 'aggregated_ogms' 1
>> option 'ap_isolation'
>> option 'bonding' 1
>> option 'fragmentation'
>> option 'gw_bandwidth'
>> option 'gw_mode' 'server'
>> option 'gw_sel_class'
>> option 'log_level'
>> option 'orig_interval'
>> option 'vis_mode'
>> option 'bridge_loop_avoidance' 1
>>
>> root at phreeN:/etc/config# egrep -v '^\ .*#|^#' dhcp
>> config dnsmasq
>> option domainneeded 1
>> option boguspriv 1
>> option localise_queries 1
>> option rebind_protection 0
>> option local '/lan/'
>> option domain 'lan'
>> option expandhosts 1
>> option nonegcache 0
>> option authoritative 1
>> option readethers 1
>> option leasefile '/tmp/dhcp.leases'
>> option resolvfile '/tmp/resolv.conf.auto'
>>
>> config dhcp lan
>> option interface lan
>> option start 100
>> option limit 150
>> option leasetime 12h
>>
>> config dhcp wan
>> option interface wan
>> option ignore 1
>>
>>
>> root at phreeN:/etc/config# egrep -v '^\ .*#|^#' network
>> config interface 'loopback'
>> option ifname 'lo'
>> option proto 'static'
>> option ipaddr '127.0.0.1'
>> option netmask '255.0.0.0'
>>
>> config interface 'lan'
>> option ifname 'eth0.1'
>> option type 'bridge'
>> option proto 'static'
>> option ipaddr '172.16.1.1'
>> option netmask '255.255.255.0'
>>
>> config interface 'wan'
>> option ifname 'eth0.2'
>> option proto 'dhcp'
>>
>> config interface 'bat0'
>> option ifname 'bat0'
>> option mtu '1528'
>> option proto 'batadv'
>> option mesh 'mesh0'
>>
>> config interface 'phree0'
>> option ifname 'wlan0'
>> option mtu '1528'
>> option proto 'batadv'
>> option mesh 'mesh0'
>>
>> config interface 'vpn'
>> option ifname 'tun0'
>> option proto 'none'
>>
>> config switch
>> option name 'rtl8366rb'
>> option reset '1'
>> option enable_vlan '1'
>>
>> config switch_vlan
>> option device 'rtl8366rb'
>> option vlan '1'
>> option ports '1 2 3 4 5t'
>>
>> config switch_vlan
>> option device 'rtl8366rb'
>> option vlan '2'
>> option ports '0 5t'
>>
>>
>> root at phreeN:/etc/config# egrep -v '^\ .*#|^#' wireless
>> config wifi-device 'radio0'
>> option type 'mac80211'
>> option hwmode '11ng'
>> option htmode 'HT20'
>> list ht_capab 'SHORT-GI-40'
>> list ht_capab 'DSSS_CCK-40'
>> option channel '3'
>> option disabled '0'
>> option phy 'phy0'
>>
>> config wifi-iface
>> option device 'radio0'
>> option encryption 'none'
>> option network 'lan'
>> option mode 'ap'
>> option ssid 'Project.Phree'
>>
>> config wifi-iface
>> option device 'radio0'
>> option encryption 'none'
>> option network 'mesh0'
>> option mode 'adhoc'
>> option bssid 'DE:AD:BE:EF:D0:0D'
>> option ssid 'mesh0'
>> option mcast_rate '11000'
>>
>> root at phreeN:/etc/config# egrep -v '^\ .*#|^#' firewall
>> config defaults
>> option syn_flood 1
>> option input ACCEPT
>> option output ACCEPT
>> option forward REJECT
>>
>> config zone
>> option name lan
>> list network 'lan'
>> option input ACCEPT
>> option output ACCEPT
>> option forward ACCEPT
>>
>> config zone
>> option name wan
>> list network 'wan'
>> list network 'wan6'
>> option input REJECT
>> option output ACCEPT
>> option forward REJECT
>> option masq 1
>> option mtu_fix 1
>>
>> config zone
>> option name vpn
>> list network 'vpn'
>> option input ACCEPT
>> option output ACCEPT
>>
>> config forwarding
>> option src lan
>> option dest wan
>>
>> config forwarding
>> option src lan
>> option dest mesh
>>
>> config forwarding
>> option src mesh
>> option dest wan
>>
>> config rule
>> option name Allow-SSH-WAN
>> option src wan
>> option proto tcp
>> option dest_port 22
>> option target ACCEPT
>> option family ipv4
>>
>> config rule
>> option name Allow-DHCP-Renew
>> option src wan
>> option proto udp
>> option dest_port 68
>> option target ACCEPT
>> option family ipv4
>>
>> config rule
>> option name Allow-Ping
>> option src wan
>> option proto icmp
>> option icmp_type echo-request
>> option family ipv4
>> option target ACCEPT
>>
>> config rule
>> option name Allow-DHCPv6
>> option src wan
>> option proto udp
>> option src_ip fe80::/10
>> option src_port 547
>> option dest_ip fe80::/10
>> option dest_port 546
>> option family ipv6
>> option target ACCEPT
>>
>> config rule
>> option name Allow-ICMPv6-Input
>> option src wan
>> option proto icmp
>> list icmp_type echo-request
>> list icmp_type echo-reply
>> list icmp_type destination-unreachable
>> list icmp_type packet-too-big
>> list icmp_type time-exceeded
>> list icmp_type bad-header
>> list icmp_type unknown-header-type
>> list icmp_type router-solicitation
>> list icmp_type neighbour-solicitation
>> list icmp_type router-advertisement
>> list icmp_type neighbour-advertisement
>> option limit 1000/sec
>> option family ipv6
>> option target ACCEPT
>>
>> config rule
>> option name Allow-ICMPv6-Forward
>> option src wan
>> option dest *
>> option proto icmp
>> list icmp_type echo-request
>> list icmp_type echo-reply
>> list icmp_type destination-unreachable
>> list icmp_type packet-too-big
>> list icmp_type time-exceeded
>> list icmp_type bad-header
>> list icmp_type unknown-header-type
>> option limit 1000/sec
>> option family ipv6
>> option target ACCEPT
>>
>> config include
>> option path /etc/firewall.user
>>
>>
>> __________________________________________________________________
>>
>> Greetings!
>>
>> I am located in Philadelphia, Pennsylvania in the USA. I apologize for
>> the poor translation as I don't speak German (if preferred, I can post
>> in English).
>>
>> I am setting up a batman-adv mesh network. Technical specifications:
>>
>> -TP-Link WR1043ND v1.11
>> -Custom OpenWRT (based on Attitude Adjustment, 12.09 r37151)
>> -batman-adv v.2013.1.0
>> -(variety of external antennas)
>>
>> I did have some questions regarding the configuration, as it seems I
>> cannot get batctl to add interfaces on startup of the devices. Manually
>> adding them, however, allows me to build a mesh network between two nodes.
>>
>> The AP starts and the mesh ESSID does as well, but...
>>
>> Relevant configuration files: (see above)
>>
>>
>>
>> --
>> brent s.
>> Project.Phree
>> http://phreewifi.org
>> _______________________________________________
>> WLANware mailing list
>> WLANware at freifunk.net
>> Abonnement abbestellen? -> http://lists.freifunk.net/mailman/listinfo/wlanware-freifunk.net
>>
>> Weitere Infos zu den freifunk.net Mailinglisten und zur An- und Abmeldung unter http://freifunk.net/mailinglisten
>>
>>
>> _______________________________________________
>> WLANware mailing list
>> WLANware at freifunk.net
>> Abonnement abbestellen? -> http://lists.freifunk.net/mailman/listinfo/wlanware-freifunk.net
>>
>> Weitere Infos zu den freifunk.net Mailinglisten und zur An- und Abmeldung unter http://freifunk.net/mailinglisten
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQEcBAEBAgAGBQJR8cfLAAoJECHrh56PP4wpLVIIAI0V7EvP2YTFrHo/BLzbOAyX
7OWO0xgRk84UXxEbT9HuuHn6RKoOQVTL94xd1cte4XzXM0ueobIVl1nBpG8/8j3v
y8dgT/kGWqqswmWJAF7TepkISvJtPjb1vCIPYQHpDBn1DmuQ0WL7BrOA+yElTvoO
ypwsTni969W3P+cGeBE6Yi1o3X1NlCIVQjHz6t2qAhd8L9scIJHQUKxxRStIncVq
AJ1ABV6EPhcdyARhv8/mvdgVXhEM68R7BVL7hRm61TgUFOqWKbMdIO/Kaj3xBZ2P
5f5ksmS2ZO96W2KFWz5U83YWSAIuFd8NJ2VL63TtSLfOxbxBiHskrqyp7xFtw1o=
=Ha6s
-----END PGP SIGNATURE-----
More information about the WLANware
mailing list