[WLANware] batman-adv
Holger Schmermbeck
hosch at mm.st
Fri Jul 26 02:41:45 CEST 2013
Of course, you can post in English. Your German is fucking awesome (with twenty dollar in my pocket...) sry for my English, but I'm in club and drunken. ;-)
Von meinem iPhone gesendet
Am 26.07.2013 um 02:08 schrieb brent <bts at project-phree.org>:
> Grüße!
>
> Ich bin in Philadelphia, Pennsylvania in den USA. Ich für die schlechte
> Übersetzung, da ich nicht Deutsch sprechen (wenn bevorzugt, kann ich in
> Englisch zu verfassen) entschuldigen.
>
> Ich gründe eine batman-adv Mesh-Netzwerk. Technische Daten:
>
> -TP-Link WR1043ND v1.11
> -Custom OpenWRT (basierend auf Attitude Adjustment, 12.09 r37151)
> -batman-adv v.2013.1.0
> - (Vielzahl von externen Antennen)
>
> Ich hatte einige Fragen zur Konfiguration, wie es scheint, kann ich
> nicht bekommen batctl Schnittstellen zur Inbetriebnahme der Geräte
> hinzuzufügen. Manuelles Hinzufügen ihnen jedoch erlaubt es mir, ein
> Mesh-Netzwerk zwischen zwei Knoten zu bauen.
>
> Der AP beginnt und das Netz ESSID tut als gut, aber ...
>
> Relevante Konfigurationsdateien:
>
> root at phreeN:/etc/config# egrep -v '^\ .*#|^#' batman-adv
> config 'mesh' 'bat0'
> option 'aggregated_ogms' 1
> option 'ap_isolation'
> option 'bonding' 1
> option 'fragmentation'
> option 'gw_bandwidth'
> option 'gw_mode' 'server'
> option 'gw_sel_class'
> option 'log_level'
> option 'orig_interval'
> option 'vis_mode'
> option 'bridge_loop_avoidance' 1
>
> root at phreeN:/etc/config# egrep -v '^\ .*#|^#' dhcp
> config dnsmasq
> option domainneeded 1
> option boguspriv 1
> option localise_queries 1
> option rebind_protection 0
> option local '/lan/'
> option domain 'lan'
> option expandhosts 1
> option nonegcache 0
> option authoritative 1
> option readethers 1
> option leasefile '/tmp/dhcp.leases'
> option resolvfile '/tmp/resolv.conf.auto'
>
> config dhcp lan
> option interface lan
> option start 100
> option limit 150
> option leasetime 12h
>
> config dhcp wan
> option interface wan
> option ignore 1
>
>
> root at phreeN:/etc/config# egrep -v '^\ .*#|^#' network
> config interface 'loopback'
> option ifname 'lo'
> option proto 'static'
> option ipaddr '127.0.0.1'
> option netmask '255.0.0.0'
>
> config interface 'lan'
> option ifname 'eth0.1'
> option type 'bridge'
> option proto 'static'
> option ipaddr '172.16.1.1'
> option netmask '255.255.255.0'
>
> config interface 'wan'
> option ifname 'eth0.2'
> option proto 'dhcp'
>
> config interface 'bat0'
> option ifname 'bat0'
> option mtu '1528'
> option proto 'batadv'
> option mesh 'mesh0'
>
> config interface 'phree0'
> option ifname 'wlan0'
> option mtu '1528'
> option proto 'batadv'
> option mesh 'mesh0'
>
> config interface 'vpn'
> option ifname 'tun0'
> option proto 'none'
>
> config switch
> option name 'rtl8366rb'
> option reset '1'
> option enable_vlan '1'
>
> config switch_vlan
> option device 'rtl8366rb'
> option vlan '1'
> option ports '1 2 3 4 5t'
>
> config switch_vlan
> option device 'rtl8366rb'
> option vlan '2'
> option ports '0 5t'
>
>
> root at phreeN:/etc/config# egrep -v '^\ .*#|^#' wireless
> config wifi-device 'radio0'
> option type 'mac80211'
> option hwmode '11ng'
> option htmode 'HT20'
> list ht_capab 'SHORT-GI-40'
> list ht_capab 'DSSS_CCK-40'
> option channel '3'
> option disabled '0'
> option phy 'phy0'
>
> config wifi-iface
> option device 'radio0'
> option encryption 'none'
> option network 'lan'
> option mode 'ap'
> option ssid 'Project.Phree'
>
> config wifi-iface
> option device 'radio0'
> option encryption 'none'
> option network 'mesh0'
> option mode 'adhoc'
> option bssid 'DE:AD:BE:EF:D0:0D'
> option ssid 'mesh0'
> option mcast_rate '11000'
>
> root at phreeN:/etc/config# egrep -v '^\ .*#|^#' firewall
> config defaults
> option syn_flood 1
> option input ACCEPT
> option output ACCEPT
> option forward REJECT
>
> config zone
> option name lan
> list network 'lan'
> option input ACCEPT
> option output ACCEPT
> option forward ACCEPT
>
> config zone
> option name wan
> list network 'wan'
> list network 'wan6'
> option input REJECT
> option output ACCEPT
> option forward REJECT
> option masq 1
> option mtu_fix 1
>
> config zone
> option name vpn
> list network 'vpn'
> option input ACCEPT
> option output ACCEPT
>
> config forwarding
> option src lan
> option dest wan
>
> config forwarding
> option src lan
> option dest mesh
>
> config forwarding
> option src mesh
> option dest wan
>
> config rule
> option name Allow-SSH-WAN
> option src wan
> option proto tcp
> option dest_port 22
> option target ACCEPT
> option family ipv4
>
> config rule
> option name Allow-DHCP-Renew
> option src wan
> option proto udp
> option dest_port 68
> option target ACCEPT
> option family ipv4
>
> config rule
> option name Allow-Ping
> option src wan
> option proto icmp
> option icmp_type echo-request
> option family ipv4
> option target ACCEPT
>
> config rule
> option name Allow-DHCPv6
> option src wan
> option proto udp
> option src_ip fe80::/10
> option src_port 547
> option dest_ip fe80::/10
> option dest_port 546
> option family ipv6
> option target ACCEPT
>
> config rule
> option name Allow-ICMPv6-Input
> option src wan
> option proto icmp
> list icmp_type echo-request
> list icmp_type echo-reply
> list icmp_type destination-unreachable
> list icmp_type packet-too-big
> list icmp_type time-exceeded
> list icmp_type bad-header
> list icmp_type unknown-header-type
> list icmp_type router-solicitation
> list icmp_type neighbour-solicitation
> list icmp_type router-advertisement
> list icmp_type neighbour-advertisement
> option limit 1000/sec
> option family ipv6
> option target ACCEPT
>
> config rule
> option name Allow-ICMPv6-Forward
> option src wan
> option dest *
> option proto icmp
> list icmp_type echo-request
> list icmp_type echo-reply
> list icmp_type destination-unreachable
> list icmp_type packet-too-big
> list icmp_type time-exceeded
> list icmp_type bad-header
> list icmp_type unknown-header-type
> option limit 1000/sec
> option family ipv6
> option target ACCEPT
>
> config include
> option path /etc/firewall.user
>
>
> __________________________________________________________________
>
> Greetings!
>
> I am located in Philadelphia, Pennsylvania in the USA. I apologize for
> the poor translation as I don't speak German (if preferred, I can post
> in English).
>
> I am setting up a batman-adv mesh network. Technical specifications:
>
> -TP-Link WR1043ND v1.11
> -Custom OpenWRT (based on Attitude Adjustment, 12.09 r37151)
> -batman-adv v.2013.1.0
> -(variety of external antennas)
>
> I did have some questions regarding the configuration, as it seems I
> cannot get batctl to add interfaces on startup of the devices. Manually
> adding them, however, allows me to build a mesh network between two nodes.
>
> The AP starts and the mesh ESSID does as well, but...
>
> Relevant configuration files: (see above)
>
>
>
> --
> brent s.
> Project.Phree
> http://phreewifi.org
> _______________________________________________
> WLANware mailing list
> WLANware at freifunk.net
> Abonnement abbestellen? -> http://lists.freifunk.net/mailman/listinfo/wlanware-freifunk.net
>
> Weitere Infos zu den freifunk.net Mailinglisten und zur An- und Abmeldung unter http://freifunk.net/mailinglisten
-------------- n�chster Teil --------------
Ein Dateianhang mit Bin�rdaten wurde abgetrennt...
Dateiname : smime.p7s
Dateityp : application/pkcs7-signature
Dateigr��e : 2796 bytes
Beschreibung: nicht verf�gbar
URL : <http://lists.freifunk.net/pipermail/wlanware-freifunk.net/attachments/20130726/cc843a9c/attachment.bin>
More information about the WLANware
mailing list