[PATCH v2 5/5] Add support for TP-Link CPE210 v3
mail at adrianschmutzler.de
mail at adrianschmutzler.de
Di Jan 29 22:31:38 CET 2019
v2 und v3 applied.
Sowohl den C60v1 als auch die beiden CPE210 sollte man vor dem nächsten Release dann unbedingt noch mal konkret testen.
C60v1 und CPE210v2 kann ich selbst machen, die habe ich rumliegen.
Grüße
Adrian
> -----Original Message-----
> From: Christian Dresel [mailto:fff at chrisi01.de]
> Sent: Dienstag, 29. Januar 2019 07:10
> To: Adrian Schmutzler <freifunk at adrianschmutzler.de>; franken-
> dev at freifunk.net
> Subject: Re: [PATCH v2 5/5] Add support for TP-Link CPE210 v3
>
> hi
>
> den hab ich sogar schon mit deiner FW getestet und tut einwandfrei, Patch
> sieht soweit auch plausibel aus. Hier gilt das gleiche für die LED wie bei dem
> v2:
>
> Reviewed-by: Christian Dresel <fff at chrisi01.de>
>
>
> Gruß
>
> Christian
>
> On 28.01.19 14:54, Adrian Schmutzler wrote:
> > This device is still in PR state in OpenWrt, since ar71xx target is
> > deprecated and thus lacking reviewers.
> > It worked nicely for me anyway, so I include the current state of the
> > PR (has not changed for months).
> >
> > Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> >
> > ---
> >
> > Changes in v2:
> > - Commit title
> > ---
> > bsp/ar71xx/.config | 2 +
> > bsp/board_ar71xx.bsp | 1 +
> > ...are-utils-tplink-safeloader-Add-CPE210-v3.patch | 42 ++++++
> > ...-ar71xx-Add-support-for-TP-Link-CPE210-v3.patch | 146
> +++++++++++++++++++++
> > .../fff/fff-network/ar71xx/network.cpe210-v3 | 7 +
> > .../fff/fff-wireless/files/etc/wifi.cpe210-v3 | 2 +
> > 6 files changed, 200 insertions(+)
> > create mode 100644
> > build_patches/openwrt/0011-firmware-utils-tplink-safeloader-Add-CPE210
> > -v3.patch create mode 100644
> > build_patches/openwrt/0012-ar71xx-Add-support-for-TP-Link-CPE210-
> v3.pa
> > tch create mode 100644
> > src/packages/fff/fff-network/ar71xx/network.cpe210-v3
> > create mode 100644
> > src/packages/fff/fff-wireless/files/etc/wifi.cpe210-v3
> >
> > diff --git a/bsp/ar71xx/.config b/bsp/ar71xx/.config index
> > 6822ca31..010b2d49 100644
> > --- a/bsp/ar71xx/.config
> > +++ b/bsp/ar71xx/.config
> > @@ -16,6 +16,8 @@
> > CONFIG_TARGET_DEVICE_ar71xx_tiny_DEVICE_cpe210-220-v1=y
> > CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_tiny_DEVICE_cpe210-220-
> v1=""
> > CONFIG_TARGET_DEVICE_ar71xx_tiny_DEVICE_cpe210-v2=y
> > CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_tiny_DEVICE_cpe210-v2=""
> > +CONFIG_TARGET_DEVICE_ar71xx_tiny_DEVICE_cpe210-v3=y
> > +CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_tiny_DEVICE_cpe210-
> v3=""
> > CONFIG_TARGET_DEVICE_ar71xx_tiny_DEVICE_cpe510-520-v1=y
> > CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_tiny_DEVICE_cpe510-520-
> v1=""
> > CONFIG_TARGET_DEVICE_ar71xx_tiny_DEVICE_gl-ar150=y
> > diff --git a/bsp/board_ar71xx.bsp b/bsp/board_ar71xx.bsp index
> > 3b504908..6760df23 100644
> > --- a/bsp/board_ar71xx.bsp
> > +++ b/bsp/board_ar71xx.bsp
> > @@ -8,6 +8,7 @@ images=("openwrt-${chipset}-${subtarget}-archer-c25-
> v1-squashfs-sysupgrade.bin"
> > "openwrt-${chipset}-${subtarget}-archer-c7-v2-squashfs-
> sysupgrade.bin"
> > "openwrt-${chipset}-${subtarget}-cpe210-220-v1-squashfs-
> sysupgrade.bin"
> > "openwrt-${chipset}-${subtarget}-cpe210-v2-squashfs-
> sysupgrade.bin"
> > + "openwrt-${chipset}-${subtarget}-cpe210-v3-squashfs-
> sysupgrade.bin"
> > "openwrt-${chipset}-${subtarget}-cpe510-520-v1-squashfs-
> sysupgrade.bin"
> > "openwrt-${chipset}-${subtarget}-gl-ar150-squashfs-sysupgrade.bin"
> > "openwrt-${chipset}-${subtarget}-tl-mr3020-v1-squashfs-
> sysupgrade.bin"
> > diff --git
> > a/build_patches/openwrt/0011-firmware-utils-tplink-safeloader-Add-CPE2
> > 10-v3.patch
> > b/build_patches/openwrt/0011-firmware-utils-tplink-safeloader-Add-CPE2
> > 10-v3.patch
> > new file mode 100644
> > index 00000000..d35b0f3e
> > --- /dev/null
> > +++ b/build_patches/openwrt/0011-firmware-utils-tplink-safeloader-Add-
> > +++ CPE210-v3.patch
> > @@ -0,0 +1,42 @@
> > +From 76c420d218b666e7b4415ca2186e3c2ce9d5d358 Mon Sep 17 00:00:00
> > +2001
> > +From: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> > +Date: Wed, 10 Oct 2018 20:05:53 +0200
> > +Subject: [PATCH 1/2] firmware-utils: tplink-safeloader: Add CPE210 v3
> > +
> > +Add TP-Link CPE210 v3 to the support list.
> > +It's identical to the v2.
> > +
> > +Signed-off-by: Robert Marko <robimarko at gmail.com>
> > +---
> > + tools/firmware-utils/src/tplink-safeloader.c | 8 ++++++--
> > + 1 file changed, 6 insertions(+), 2 deletions(-)
> > +
> > +diff --git a/tools/firmware-utils/src/tplink-safeloader.c
> > +b/tools/firmware-utils/src/tplink-safeloader.c
> > +index b2cc96b..8164c1c 100644
> > +--- a/tools/firmware-utils/src/tplink-safeloader.c
> > ++++ b/tools/firmware-utils/src/tplink-safeloader.c
> > +@@ -155,7 +155,7 @@ static struct device_info boards[] = {
> > + .last_sysupgrade_partition = "support-list",
> > + },
> > +
> > +- /** Firmware layout for the CPE210 V2 */
> > ++ /** Firmware layout for the CPE210 V2 and V3 */
> > + {
> > + .id = "CPE210V2",
> > + .vendor = "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
> > +@@ -170,7 +170,11 @@ static struct device_info boards[] = {
> > + "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
> > + "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
> > + "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
> > +- "CPE210(TP-LINK|US|N300-2):2.0\r\n",
> > ++ "CPE210(TP-LINK|US|N300-2):2.0\r\n"
> > ++ "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
> > ++ "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
> > ++ "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
> > ++ "CPE210(TP-LINK|EU|N300-2):3.0\r\n",
> > + .support_trail = '\xff',
> > + .soft_ver = NULL,
> > +
> > +--
> > +2.7.4
> > +
> > diff --git
> > a/build_patches/openwrt/0012-ar71xx-Add-support-for-TP-Link-CPE210-
> v3.
> > patch
> > b/build_patches/openwrt/0012-ar71xx-Add-support-for-TP-Link-CPE210-
> v3.
> > patch
> > new file mode 100644
> > index 00000000..25123e4f
> > --- /dev/null
> > +++ b/build_patches/openwrt/0012-ar71xx-Add-support-for-TP-Link-
> CPE210
> > +++ -v3.patch
> > @@ -0,0 +1,146 @@
> > +From 8b4c513b3a3515bde608aa5d465ed6eac201eb24 Mon Sep 17
> 00:00:00
> > +2001
> > +From: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> > +Date: Wed, 10 Oct 2018 20:13:09 +0200
> > +Subject: [PATCH 2/2] ar71xx: Add support for TP-Link CPE210 v3
> > +
> > +Looks identical to the v2
> > +
> > +This PR adds support for a popular low-cost 2.4GHz N based AP
> > +
> > +Specifications:
> > + - SoC: Qualcomm Atheros QCA9533 (650MHz)
> > + - RAM: 64MB
> > + - Storage: 8 MB SPI NOR
> > + - Wireless: 2.4GHz N based built into SoC 2x2
> > + - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN
> > +
> > +Installation:
> > +Flash factory image through stock firmware WEB UI or through TFTP To
> > +get to TFTP recovery just hold reset button while powering on for
> > +around 4-5 seconds and release.
> > +Rename factory image to recovery.bin
> > +Stock TFTP server IP:192.168.0.100
> > +Stock device TFTP address:192.168.0.254
> > +
> > +Signed-off-by: Robert Marko <robimarko at gmail.com>
> > +---
> > + target/linux/ar71xx/base-files/etc/board.d/01_leds | 4 +++-
> > + target/linux/ar71xx/base-files/etc/board.d/02_network | 1 +
> > + target/linux/ar71xx/base-files/lib/ar71xx.sh | 4 ++++
> > + target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 3 ++-
> > +target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c | 3 +++
> > + target/linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
> > + target/linux/ar71xx/image/generic-tp-link.mk | 7 +++++++
> > + 7 files changed, 21 insertions(+), 2 deletions(-)
> > +
> > +diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > +b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > +index 858d675..25e2343 100755
> > +--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > ++++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > +@@ -237,6 +237,7 @@ cf-e530n)
> > + ;;
> > + cpe210|\
> > + cpe210-v2|\
> > ++cpe210-v3|\
> > + cpe510|\
> > + wbs210|\
> > + wbs510)
> > +@@ -247,7 +248,8 @@ wbs510)
> > + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4"
> "wlan0" "76" "100" "-75" "13"
> > +
> > + case "$board" in
> > +- cpe210-v2)
> > ++ cpe210-v2|\
> > ++ cpe210-v3)
> > + ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan0"
> "eth0"
> > + ;;
> > + *)
> > +diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network
> > +b/target/linux/ar71xx/base-files/etc/board.d/02_network
> > +index b007636..f04ef27 100755
> > +--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
> > ++++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
> > +@@ -75,6 +75,7 @@ ar71xx_setup_interfaces()
> > + cf-e380ac-v1|\
> > + cf-e380ac-v2|\
> > + cpe210-v2|\
> > ++ cpe210-v3|\
> > + dr342|\
> > + eap120|\
> > + eap300v2|\
> > +diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > +b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > +index 3af2eee..c943e5c 100755
> > +--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > ++++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > +@@ -577,6 +577,10 @@ ar71xx_board_detect() {
> > + name="cpe210-v2"
> > + tplink_pharos_board_detect
> "$(tplink_pharos_v2_get_model_string)"
> > + ;;
> > ++ *"CPE210 v3")
> > ++ name="cpe210-v3"
> > ++ tplink_pharos_board_detect
> "$(tplink_pharos_v2_get_model_string)"
> > ++ ;;
> > + *"CPE505N")
> > + name="cpe505n"
> > + ;;
> > +diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > +b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > +index ca1270b..a04dd74 100755
> > +--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > ++++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > +@@ -587,7 +587,8 @@ platform_check_image() {
> > + tplink_pharos_check_image "$1" "7f454c46"
> "$(tplink_pharos_get_model_string)" '' && return 0
> > + return 1
> > + ;;
> > +- cpe210-v2)
> > ++ cpe210-v2|\
> > ++ cpe210-v3)
> > + tplink_pharos_check_image "$1" "01000000"
> "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0
> > + return 1
> > + ;;
> > +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
> > +b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
> > +index ceb1769..f25a69f 100644
> > +--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
> > ++++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
> > +@@ -236,6 +236,9 @@ MIPS_MACHINE(ATH79_MACH_CPE210, "CPE210",
> > +"TP-LINK CPE210/220", MIPS_MACHINE(ATH79_MACH_CPE210_V2,
> "CPE210V2", "TP-LINK CPE210 v2",
> > + cpe210_v2_setup);
> > +
> > ++MIPS_MACHINE(ATH79_MACH_CPE210_V3, "CPE210V3", "TP-LINK
> CPE210 v3",
> > ++ cpe210_v2_setup);
> > ++
> > + MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK
> CPE510/520",
> > + cpe510_setup);
> > +
> > +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > +b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > +index 390ec0b..f7621c4 100644
> > +--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > ++++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > +@@ -75,6 +75,7 @@ enum ath79_mach_type {
> > + ATH79_MACH_CF_E530N, /* COMFAST CF-E530N
> */
> > + ATH79_MACH_CPE210, /* TP-LINK CPE210 v1
> */
> > + ATH79_MACH_CPE210_V2, /* TP-LINK CPE210 v2
> */
> > ++ ATH79_MACH_CPE210_V3, /* TP-LINK CPE210 v3
> */
> > + ATH79_MACH_CPE505N, /* P&W CPE505N */
> > + ATH79_MACH_CPE510, /* TP-LINK CPE510 */
> > + ATH79_MACH_CPE830, /* YunCore CPE830 */
> > +diff --git a/target/linux/ar71xx/image/generic-tp-link.mk
> > +b/target/linux/ar71xx/image/generic-tp-link.mk
> > +index 502c88b..e5aca30 100644
> > +--- a/target/linux/ar71xx/image/generic-tp-link.mk
> > ++++ b/target/linux/ar71xx/image/generic-tp-link.mk
> > +@@ -195,6 +195,13 @@ define Device/cpe210-v2 endef
> TARGET_DEVICES
> > ++= cpe210-v2
> > +
> > ++define Device/cpe210-v3
> > ++ $(Device/cpe210-v2)
> > ++ DEVICE_TITLE := TP-LINK CPE210 v3
> > ++ BOARDNAME := CPE210V3
> > ++endef
> > ++TARGET_DEVICES += cpe210-v3
> > ++
> > + define Device/wbs210-v1
> > + $(Device/cpe510-520-v1)
> > + DEVICE_TITLE := TP-LINK WBS210 v1
> > +--
> > +2.7.4
> > +
> > diff --git a/src/packages/fff/fff-network/ar71xx/network.cpe210-v3
> > b/src/packages/fff/fff-network/ar71xx/network.cpe210-v3
> > new file mode 100644
> > index 00000000..245aa6e3
> > --- /dev/null
> > +++ b/src/packages/fff/fff-network/ar71xx/network.cpe210-v3
> > @@ -0,0 +1,7 @@
> > +WANDEV=eth0
> > +SWITCHDEV=eth0
> > +ONE_PORT="YES"
> > +
> > +. /etc/network.mode
> > +
> > +ROUTERMAC=$(cat /sys/class/ieee80211/phy0/macaddress)
> > diff --git a/src/packages/fff/fff-wireless/files/etc/wifi.cpe210-v3
> > b/src/packages/fff/fff-wireless/files/etc/wifi.cpe210-v3
> > new file mode 100644
> > index 00000000..3a5f3c49
> > --- /dev/null
> > +++ b/src/packages/fff/fff-wireless/files/etc/wifi.cpe210-v3
> > @@ -0,0 +1,2 @@
> > +uci -q set system.rssid_wlan0.dev=radio0 uci -q commit system
-------------- nächster Teil --------------
Ein Dateianhang mit Binärdaten wurde abgetrennt...
Dateiname : nicht verfügbar
Dateityp : application/pgp-signature
Dateigröße : 834 bytes
Beschreibung: nicht verfügbar
URL : <http://lists.freifunk.net/pipermail/franken-dev-freifunk.net/attachments/20190129/0a424923/attachment.sig>
Mehr Informationen über die Mailingliste franken-dev