[PATCH v2 5/5] Add support for TP-Link CPE210 v3
Adrian Schmutzler
mail at adrianschmutzler.de
Di Jan 29 12:06:35 CET 2019
Hallo Christian,
vielen Dank.
Hast du irgendwas bzgl. des hier beschriebenen Problems festgestellt:
http://lists.freifunk.net/pipermail/franken-freifunk.net/2018-October/015843.html
Grüße
Adrian
> -----Original Message-----
> From: franken-dev [mailto:franken-dev-bounces at freifunk.net] On Behalf Of
> Christian Dresel
> Sent: Dienstag, 29. Januar 2019 07:10
> To: Adrian Schmutzler <freifunk at adrianschmutzler.de>; franken-
> dev at freifunk.net
> Subject: Re: [PATCH v2 5/5] Add support for TP-Link CPE210 v3
>
> hi
>
> den hab ich sogar schon mit deiner FW getestet und tut einwandfrei,
> Patch sieht soweit auch plausibel aus. Hier gilt das gleiche für die LED
> wie bei dem v2:
>
> Reviewed-by: Christian Dresel <fff at chrisi01.de>
>
>
> Gruß
>
> Christian
>
> On 28.01.19 14:54, Adrian Schmutzler wrote:
> > This device is still in PR state in OpenWrt, since ar71xx target
> > is deprecated and thus lacking reviewers.
> > It worked nicely for me anyway, so I include the current state of
> > the PR (has not changed for months).
> >
> > Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> >
> > ---
> >
> > Changes in v2:
> > - Commit title
> > ---
> > bsp/ar71xx/.config | 2 +
> > bsp/board_ar71xx.bsp | 1 +
> > ...are-utils-tplink-safeloader-Add-CPE210-v3.patch | 42 ++++++
> > ...-ar71xx-Add-support-for-TP-Link-CPE210-v3.patch | 146
> +++++++++++++++++++++
> > .../fff/fff-network/ar71xx/network.cpe210-v3 | 7 +
> > .../fff/fff-wireless/files/etc/wifi.cpe210-v3 | 2 +
> > 6 files changed, 200 insertions(+)
> > create mode 100644 build_patches/openwrt/0011-firmware-utils-tplink-
> safeloader-Add-CPE210-v3.patch
> > create mode 100644 build_patches/openwrt/0012-ar71xx-Add-support-for-
> TP-Link-CPE210-v3.patch
> > create mode 100644 src/packages/fff/fff-network/ar71xx/network.cpe210-v3
> > create mode 100644 src/packages/fff/fff-wireless/files/etc/wifi.cpe210-v3
> >
> > diff --git a/bsp/ar71xx/.config b/bsp/ar71xx/.config
> > index 6822ca31..010b2d49 100644
> > --- a/bsp/ar71xx/.config
> > +++ b/bsp/ar71xx/.config
> > @@ -16,6 +16,8 @@ CONFIG_TARGET_DEVICE_ar71xx_tiny_DEVICE_cpe210-
> 220-v1=y
> > CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_tiny_DEVICE_cpe210-220-
> v1=""
> > CONFIG_TARGET_DEVICE_ar71xx_tiny_DEVICE_cpe210-v2=y
> > CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_tiny_DEVICE_cpe210-v2=""
> > +CONFIG_TARGET_DEVICE_ar71xx_tiny_DEVICE_cpe210-v3=y
> > +CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_tiny_DEVICE_cpe210-v3=""
> > CONFIG_TARGET_DEVICE_ar71xx_tiny_DEVICE_cpe510-520-v1=y
> > CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_tiny_DEVICE_cpe510-520-
> v1=""
> > CONFIG_TARGET_DEVICE_ar71xx_tiny_DEVICE_gl-ar150=y
> > diff --git a/bsp/board_ar71xx.bsp b/bsp/board_ar71xx.bsp
> > index 3b504908..6760df23 100644
> > --- a/bsp/board_ar71xx.bsp
> > +++ b/bsp/board_ar71xx.bsp
> > @@ -8,6 +8,7 @@ images=("openwrt-${chipset}-${subtarget}-archer-c25-v1-
> squashfs-sysupgrade.bin"
> > "openwrt-${chipset}-${subtarget}-archer-c7-v2-squashfs-sysupgrade.bin"
> > "openwrt-${chipset}-${subtarget}-cpe210-220-v1-squashfs-
> sysupgrade.bin"
> > "openwrt-${chipset}-${subtarget}-cpe210-v2-squashfs-sysupgrade.bin"
> > + "openwrt-${chipset}-${subtarget}-cpe210-v3-squashfs-sysupgrade.bin"
> > "openwrt-${chipset}-${subtarget}-cpe510-520-v1-squashfs-
> sysupgrade.bin"
> > "openwrt-${chipset}-${subtarget}-gl-ar150-squashfs-sysupgrade.bin"
> > "openwrt-${chipset}-${subtarget}-tl-mr3020-v1-squashfs-sysupgrade.bin"
> > diff --git a/build_patches/openwrt/0011-firmware-utils-tplink-safeloader-
> Add-CPE210-v3.patch b/build_patches/openwrt/0011-firmware-utils-tplink-
> safeloader-Add-CPE210-v3.patch
> > new file mode 100644
> > index 00000000..d35b0f3e
> > --- /dev/null
> > +++ b/build_patches/openwrt/0011-firmware-utils-tplink-safeloader-Add-
> CPE210-v3.patch
> > @@ -0,0 +1,42 @@
> > +From 76c420d218b666e7b4415ca2186e3c2ce9d5d358 Mon Sep 17 00:00:00
> 2001
> > +From: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> > +Date: Wed, 10 Oct 2018 20:05:53 +0200
> > +Subject: [PATCH 1/2] firmware-utils: tplink-safeloader: Add CPE210 v3
> > +
> > +Add TP-Link CPE210 v3 to the support list.
> > +It's identical to the v2.
> > +
> > +Signed-off-by: Robert Marko <robimarko at gmail.com>
> > +---
> > + tools/firmware-utils/src/tplink-safeloader.c | 8 ++++++--
> > + 1 file changed, 6 insertions(+), 2 deletions(-)
> > +
> > +diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-
> utils/src/tplink-safeloader.c
> > +index b2cc96b..8164c1c 100644
> > +--- a/tools/firmware-utils/src/tplink-safeloader.c
> > ++++ b/tools/firmware-utils/src/tplink-safeloader.c
> > +@@ -155,7 +155,7 @@ static struct device_info boards[] = {
> > + .last_sysupgrade_partition = "support-list",
> > + },
> > +
> > +- /** Firmware layout for the CPE210 V2 */
> > ++ /** Firmware layout for the CPE210 V2 and V3 */
> > + {
> > + .id = "CPE210V2",
> > + .vendor = "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
> > +@@ -170,7 +170,11 @@ static struct device_info boards[] = {
> > + "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
> > + "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
> > + "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
> > +- "CPE210(TP-LINK|US|N300-2):2.0\r\n",
> > ++ "CPE210(TP-LINK|US|N300-2):2.0\r\n"
> > ++ "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
> > ++ "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
> > ++ "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
> > ++ "CPE210(TP-LINK|EU|N300-2):3.0\r\n",
> > + .support_trail = '\xff',
> > + .soft_ver = NULL,
> > +
> > +--
> > +2.7.4
> > +
> > diff --git a/build_patches/openwrt/0012-ar71xx-Add-support-for-TP-Link-
> CPE210-v3.patch b/build_patches/openwrt/0012-ar71xx-Add-support-for-TP-
> Link-CPE210-v3.patch
> > new file mode 100644
> > index 00000000..25123e4f
> > --- /dev/null
> > +++ b/build_patches/openwrt/0012-ar71xx-Add-support-for-TP-Link-CPE210-
> v3.patch
> > @@ -0,0 +1,146 @@
> > +From 8b4c513b3a3515bde608aa5d465ed6eac201eb24 Mon Sep 17 00:00:00
> 2001
> > +From: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> > +Date: Wed, 10 Oct 2018 20:13:09 +0200
> > +Subject: [PATCH 2/2] ar71xx: Add support for TP-Link CPE210 v3
> > +
> > +Looks identical to the v2
> > +
> > +This PR adds support for a popular low-cost 2.4GHz N based AP
> > +
> > +Specifications:
> > + - SoC: Qualcomm Atheros QCA9533 (650MHz)
> > + - RAM: 64MB
> > + - Storage: 8 MB SPI NOR
> > + - Wireless: 2.4GHz N based built into SoC 2x2
> > + - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN
> > +
> > +Installation:
> > +Flash factory image through stock firmware WEB UI or
> > +through TFTP
> > +To get to TFTP recovery just hold reset button while
> > +powering on for around 4-5 seconds and release.
> > +Rename factory image to recovery.bin
> > +Stock TFTP server IP:192.168.0.100
> > +Stock device TFTP address:192.168.0.254
> > +
> > +Signed-off-by: Robert Marko <robimarko at gmail.com>
> > +---
> > + target/linux/ar71xx/base-files/etc/board.d/01_leds | 4 +++-
> > + target/linux/ar71xx/base-files/etc/board.d/02_network | 1 +
> > + target/linux/ar71xx/base-files/lib/ar71xx.sh | 4 ++++
> > + target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 3 ++-
> > + target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c | 3 +++
> > + target/linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
> > + target/linux/ar71xx/image/generic-tp-link.mk | 7 +++++++
> > + 7 files changed, 21 insertions(+), 2 deletions(-)
> > +
> > +diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > +index 858d675..25e2343 100755
> > +--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > ++++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > +@@ -237,6 +237,7 @@ cf-e530n)
> > + ;;
> > + cpe210|\
> > + cpe210-v2|\
> > ++cpe210-v3|\
> > + cpe510|\
> > + wbs210|\
> > + wbs510)
> > +@@ -247,7 +248,8 @@ wbs510)
> > + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0"
> "76" "100" "-75" "13"
> > +
> > + case "$board" in
> > +- cpe210-v2)
> > ++ cpe210-v2|\
> > ++ cpe210-v3)
> > + ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan0" "eth0"
> > + ;;
> > + *)
> > +diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network
> b/target/linux/ar71xx/base-files/etc/board.d/02_network
> > +index b007636..f04ef27 100755
> > +--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
> > ++++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
> > +@@ -75,6 +75,7 @@ ar71xx_setup_interfaces()
> > + cf-e380ac-v1|\
> > + cf-e380ac-v2|\
> > + cpe210-v2|\
> > ++ cpe210-v3|\
> > + dr342|\
> > + eap120|\
> > + eap300v2|\
> > +diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > +index 3af2eee..c943e5c 100755
> > +--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > ++++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > +@@ -577,6 +577,10 @@ ar71xx_board_detect() {
> > + name="cpe210-v2"
> > + tplink_pharos_board_detect
> "$(tplink_pharos_v2_get_model_string)"
> > + ;;
> > ++ *"CPE210 v3")
> > ++ name="cpe210-v3"
> > ++ tplink_pharos_board_detect
> "$(tplink_pharos_v2_get_model_string)"
> > ++ ;;
> > + *"CPE505N")
> > + name="cpe505n"
> > + ;;
> > +diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > +index ca1270b..a04dd74 100755
> > +--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > ++++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > +@@ -587,7 +587,8 @@ platform_check_image() {
> > + tplink_pharos_check_image "$1" "7f454c46"
> "$(tplink_pharos_get_model_string)" '' && return 0
> > + return 1
> > + ;;
> > +- cpe210-v2)
> > ++ cpe210-v2|\
> > ++ cpe210-v3)
> > + tplink_pharos_check_image "$1" "01000000"
> "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0
> > + return 1
> > + ;;
> > +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
> b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
> > +index ceb1769..f25a69f 100644
> > +--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
> > ++++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
> > +@@ -236,6 +236,9 @@ MIPS_MACHINE(ATH79_MACH_CPE210, "CPE210",
> "TP-LINK CPE210/220",
> > + MIPS_MACHINE(ATH79_MACH_CPE210_V2, "CPE210V2", "TP-LINK CPE210
> v2",
> > + cpe210_v2_setup);
> > +
> > ++MIPS_MACHINE(ATH79_MACH_CPE210_V3, "CPE210V3", "TP-LINK CPE210
> v3",
> > ++ cpe210_v2_setup);
> > ++
> > + MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE510/520",
> > + cpe510_setup);
> > +
> > +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > +index 390ec0b..f7621c4 100644
> > +--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > ++++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > +@@ -75,6 +75,7 @@ enum ath79_mach_type {
> > + ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */
> > + ATH79_MACH_CPE210, /* TP-LINK CPE210 v1 */
> > + ATH79_MACH_CPE210_V2, /* TP-LINK CPE210 v2 */
> > ++ ATH79_MACH_CPE210_V3, /* TP-LINK CPE210 v3 */
> > + ATH79_MACH_CPE505N, /* P&W CPE505N */
> > + ATH79_MACH_CPE510, /* TP-LINK CPE510 */
> > + ATH79_MACH_CPE830, /* YunCore CPE830 */
> > +diff --git a/target/linux/ar71xx/image/generic-tp-link.mk
> b/target/linux/ar71xx/image/generic-tp-link.mk
> > +index 502c88b..e5aca30 100644
> > +--- a/target/linux/ar71xx/image/generic-tp-link.mk
> > ++++ b/target/linux/ar71xx/image/generic-tp-link.mk
> > +@@ -195,6 +195,13 @@ define Device/cpe210-v2
> > + endef
> > + TARGET_DEVICES += cpe210-v2
> > +
> > ++define Device/cpe210-v3
> > ++ $(Device/cpe210-v2)
> > ++ DEVICE_TITLE := TP-LINK CPE210 v3
> > ++ BOARDNAME := CPE210V3
> > ++endef
> > ++TARGET_DEVICES += cpe210-v3
> > ++
> > + define Device/wbs210-v1
> > + $(Device/cpe510-520-v1)
> > + DEVICE_TITLE := TP-LINK WBS210 v1
> > +--
> > +2.7.4
> > +
> > diff --git a/src/packages/fff/fff-network/ar71xx/network.cpe210-v3
> b/src/packages/fff/fff-network/ar71xx/network.cpe210-v3
> > new file mode 100644
> > index 00000000..245aa6e3
> > --- /dev/null
> > +++ b/src/packages/fff/fff-network/ar71xx/network.cpe210-v3
> > @@ -0,0 +1,7 @@
> > +WANDEV=eth0
> > +SWITCHDEV=eth0
> > +ONE_PORT="YES"
> > +
> > +. /etc/network.mode
> > +
> > +ROUTERMAC=$(cat /sys/class/ieee80211/phy0/macaddress)
> > diff --git a/src/packages/fff/fff-wireless/files/etc/wifi.cpe210-v3
> b/src/packages/fff/fff-wireless/files/etc/wifi.cpe210-v3
> > new file mode 100644
> > index 00000000..3a5f3c49
> > --- /dev/null
> > +++ b/src/packages/fff/fff-wireless/files/etc/wifi.cpe210-v3
> > @@ -0,0 +1,2 @@
> > +uci -q set system.rssid_wlan0.dev=radio0
> > +uci -q commit system
-------------- nächster Teil --------------
Ein Dateianhang mit Binärdaten wurde abgetrennt...
Dateiname : nicht verfügbar
Dateityp : application/pgp-signature
Dateigröße : 834 bytes
Beschreibung: nicht verfügbar
URL : <http://lists.freifunk.net/pipermail/franken-dev-freifunk.net/attachments/20190129/ca7a9d36/attachment.sig>
Mehr Informationen über die Mailingliste franken-dev