[WLANware] Upgrade to 1.7.0 and Two routers connected via cable
Thomas Mellenthin
thomas at home.mellenthin.de
Sun Jun 6 22:08:32 CEST 2010
Hi Jan,
On 05.06.10 14:11, jan at aims.ac.za wrote:
> I upgraded one to 1.7.0 today and wan_proto=olsr
> is no longer available, not even allowed.
>
> What is the new solution?
Have a look at this example which is taken from my router. The
mesh-network is 10.22.0.0/16, the wired connection is 10.22.255.16/30.
Configure the interfaces like this:
Protocol: static
IP-Adress: keep the old IP (i.e. 10.22.255.17)
Netmask: keep the old Netmask (i.e. 255.255.255.254)
The setting to enable OLSR "on the wire" has moved to the OLSR-Page:
"OLSR-Network" (ff_range).
If this field is empty olsrd runs only on the wifi-network interface.
As far as I understand, you have to enter both networks (wired and
wireless) in this field, if you want to run olsrd on both interfaces. In
my example, ff_range should be "10.22.0.0/16;10.22.255.16/30"
This worked well for me, even between different firmware versions
(1.6.36 / 1.7.0).
// melle
--
xmpp: melle at jabber.ccc.de passion: http://mellenthin.de
F489 2C4F E8C2 9A15 DBCB mission: http://freifunk-potsdam.de
127C 81B6 FDC3 7C1A FF85 pubkey: http://mellenthin.de/key.txt
More information about the WLANware
mailing list