[WLANware] bricked mit busybox?
Rainer Zocholl
UseNet-Posting-Nospam-74308- at zocki.toppoint.de
Tue Sep 12 23:11:00 CEST 2006
Hallo
ich hoffe ich bin hier richtig mit fragen zur freifunk openwrt version ?
Neben mir steht ein WRT54G V2 bei dem die Power und DMZ LED dauer leuchet...
Wie kam das?
Update von ca. FF 1.0.7 auf 1.2.5
Dann wollte ich "kurzmal" die kisemet-drone ausprobieren.
Funktionierte nicht, weil ne alte libpcap installiert wird(.083),
obwohl die Software .9 braucht. (Details siehe unten)
Also "kismet" installiert, in der Hoffnung das das die richtige lib
anzieht.
Funktioniert auch nicht, shell "tr" fehlt.
Woher nehmen?
Einfach mal busybox neu installieren?
Warum nicht? Ich kann ja immer nur per tftp flashen.
Tja, danach wurde jeder Befehl mit einem Segment fault beantwortet.
Also (XP home) auf 192er netz
netsh dump > netsh.savedhcp
-> IP nummer auf 192.168.1.2
netsh dump > netsh.192.168.1.2
C:\Linksys-WRTG>tftp -i 192.168.1.1 put openwrt-g-freifunk-1.2.5-de.bin
Übertragung erfolgreich: 1438720 Bytes in 4 Sekundens, 359680 Bytes/s
Blinken hört nach ein paar Sekunden auf und Power,DMZ und die LAN LED geht
an, kiste hat also gebooted aber scheint in deer init scheife zuhängen?
IP zurück bauen:
netsh < netsh.savedhcp
ping 10.10.10.9
Ping wird ausgeführt für 10.10.10.9 mit 32 Bytes Daten:
Zeitüberschreitung der Anforderung.
Zeitüberschreitung der Anforderung.
Und nu?
Wo ist die Kiste geblieben?
Ganz tot ist sie ja nicht.
Ich kann sie beliebig oft flashen,
aber weder unter 192.168.1.1 nochunter der alten IP erreichen.
Also mal das "orginal" flashen:
>tftp -i 192.168.1.1 put openwrt-wrt54g-squashfs.bin
telnet 10.10.10.9
geht!
also openwrt-g-freifunk-1.2.5-de.bin per tftp:
geht nicht
Ich habe dann mal die openwrt version probiert:
Läuft!
Also hat die 1.2.5 irgendein Problem?
freifunk wieder drauf:
Hängt wie gehabt.
#######################################################################
So in etwa sieht es aus:
BusyBox v1.01 (2006.04.12-12:05+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
( ).-----.-----.-----.) ) ) ).----.) )
( - )) _ ) -__) )) ) ) )) _)) _)
(_______)) __)_____)__)__))________))__) )____)
)__) F R E I F U N K F I R M W A R E
root at linksys:~# ipkg update
Downloading http://styx.commando.de/sven-ola/ipkg/Packages ...
Connecting to styx.commando.de[212.91.225.42]:80
Packages 100% |*****************************| 42038 00:00 ETA
Done.
Updated list of available packages in /usr/lib/ipkg/lists/freifunk
Downloading http://downloads.openwrt.org/whiterussian/packages/Packages ...
Connecting to downloads.openwrt.org[195.56.146.238]:80
Packages 100% |*****************************| 121 KB 00:00 ETA
Done.
Updated list of available packages in /usr/lib/ipkg/lists/whiterussian
Downloading http://downloads.openwrt.org/whiterussian/packages/non-free/Packages ...
Connecting to downloads.openwrt.org[195.56.146.238]:80
Packages 100% |*****************************| 568 00:00 ETA
Done.
Updated list of available packages in /usr/lib/ipkg/lists/non-free
root at linksys:~# ipkg upgrade
Package dropbear (0.47) installed in root is up to date
Package freifunk-dnsmasq (1.2.5) installed in root is up to date
Package freifunk-mtdkill (0.2) installed in root is up to date
Package wl (1.0) installed in root is up to date
Package freifunk-olsrd (0.4.10) installed in root is up to date
Package freifunk-rdate (1.2.5) installed in root is up to date
Package freifunk-upload (0.8) installed in root is up to date
Not downgrading package ip from 2.0
2.0 to 2.0
Package freifunk-webadmin-de (1.2.5) installed in root is up to date
Not downgrading package ip from 2.0
2.0 to 2.0
Package wificonf (1.3) installed in root is up to date
Assuming locally installed package kernel (2.4.30-brcm-3) is up to date
Not downgrading package base-files from 999 to 8
root at linksys:~# ipkg install kismet-drone
Downloading http://styx.commando.de/sven-ola/ipkg/libpcap_0.8.3-1_mipsel.ipk ...
Connecting to styx.commando.de[212.91.225.42]:80
libpcap_0.8.3-1_mips 100% |*****************************************************| 61462 00:00 ETA
Done.
Unpacking libpcap...Done.
Configuring libpcap...Done.
Downloading http://styx.commando.de/sven-ola/ipkg/uclibc++_0.1.11-2_mipsel.ipk ...
Connecting to styx.commando.de[212.91.225.42]:80
uclibc++_0.1.11-2_mi 100% |*****************************************************| 56000 00:00 ETA
Done.
Unpacking uclibc++...Done.
Configuring uclibc++...Done.
Downloading http://downloads.openwrt.org/whiterussian/packages/kismet-drone_2005-08-R1-1_mipsel.ipk ...
Connecting to downloads.openwrt.org[195.56.146.238]:80
kismet-drone_2005-08 100% |*****************************************************| 89358 00:00 ETA
Done.
Unpacking kismet-drone...Done.
Configuring kismet-drone...Done.
root at linksys:~# kismet_drone
kismet_drone: can't load library 'libpcap.so.0.9'
root at linksys:~# ipkg install libpcap
Downloading http://styx.commando.de/sven-ola/ipkg/libpcap_0.8.3-1_mipsel.ipk ...
Connecting to styx.commando.de[212.91.225.42]:80
libpcap_0.8.3-1_mips 100% |*****************************************************| 61462 00:00 ETA
Done.
Unpacking libpcap...Done.
Configuring libpcap...Done.
root at linksys:~# ipkg install kismet
Downloading http://styx.commando.de/sven-ola/ipkg/libgcc_3.4.4-8_mipsel.ipk ...
Connecting to styx.commando.de[212.91.225.42]:80
libgcc_3.4.4-8_mipse 100% |*****************************************************| 23387 00:00 ETA
Done.
Unpacking libgcc...Done.
Configuring libgcc...Done.
Downloading http://styx.commando.de/sven-ola/ipkg/libncurses_5.2_mipsel.ipk ...
Connecting to styx.commando.de[212.91.225.42]:80
libncurses_5.2_mipse 100% |*****************************************************| 109 KB 00:00 ETA
Done.
Unpacking libncurses...Done.
Configuring libncurses...Done.
Downloading http://styx.commando.de/sven-ola/ipkg/uclibc++_0.1.11-2_mipsel.ipk ...
Connecting to styx.commando.de[212.91.225.42]:80
uclibc++_0.1.11-2_mi 100% |*****************************************************| 56000 00:00 ETA
Done.
Unpacking uclibc++...Done.
Configuring uclibc++...Done.
Downloading http://downloads.openwrt.org/whiterussian/packages/kismet-client_2005-08-R1-1_mipsel.ipk ...
Connecting to downloads.openwrt.org[195.56.146.238]:80
kismet-client_2005-0 100% |*****************************************************| 148 KB 00:00 ETA
Done.
Unpacking kismet-client...Done.
Configuring kismet-client...Done.
Downloading http://downloads.openwrt.org/whiterussian/packages/kismet-server_2005-08-R1-1_mipsel.ipk ...
Connecting to downloads.openwrt.org[195.56.146.238]:80
kismet-server_2005-0 100% |*****************************************************| 201 KB 00:00 ETA
Done.
Unpacking kismet-server...Done.
Configuring kismet-server...Configuration file `/etc/kismet/ap_manuf'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions (if diff is installed)
The default action is to keep your current version.
*** ap_manuf (Y/I/N/O/D) [default=N] ? d
diff -u ///etc/kismet/ap_manuf //tmp/ipkg/kismet-server/data//etc/kismet/ap_manuf
/bin/ipkg: 1182: diff: not found
[Press ENTER to continue]
Configuration file `/etc/kismet/ap_manuf'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions (if diff is installed)
The default action is to keep your current version.
*** ap_manuf (Y/I/N/O/D) [default=N] ? i
Configuration file `/etc/kismet/client_manuf'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions (if diff is installed)
The default action is to keep your current version.
*** client_manuf (Y/I/N/O/D) [default=N] ? y
Configuration file `/etc/kismet/kismet.conf'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions (if diff is installed)
The default action is to keep your current version.
*** kismet.conf (Y/I/N/O/D) [default=N] ? y
Done.
Downloading http://downloads.openwrt.org/whiterussian/packages/kismet_2005-08-R1-1_mipsel.ipk ...
Connecting to downloads.openwrt.org[195.56.146.238]:80
kismet_2005-08-R1-1_ 100% |*****************************************************| 1607 00:00 ETA
Done.
Unpacking kismet...Done.
Configuring kismet...Done.
root at linksys:~# kismet
/usr/bin/kismet: 12: tr: not found
/usr/bin/kismet: 13: tr: not found
No gui specified in /etc/kismet/kismet_ui.conf. Please specify one!
...
root at linksys:~# ipkg install busybox
Downloading http://downloads.openwrt.org/whiterussian/packages/busybox_1.00-3_mipsel.ipk ...
Connecting to downloads.openwrt.org[195.56.146.238]:80
busybox_1.00-3_mipse 100% |*****************************************************| 249 KB 00:00 ETA
Done.
Unpacking busybox...Done.
Configuring busybox...rm: unable to remove `//tmp/ipkg/busybox/data': Is a directory
rmdir: `//tmp/ipkg/busybox': Directory not empty
mkdir: Cannot create directory `//': File exists
Done.
root at linksys:~# tr
root at linksys:~# kismet
Segmentation fault
root at linksys:~#
root at linksys:~#
root at linksys:~#
root at linksys:~# ps
PID Uid VmSize Stat Command
1 16749 340 S init
2 16749 SW [keventd]
3 16749 RWN [ksoftirqd_CPU0]
4 16749 SW [kswapd]
5 16749 SW [bdflush]
6 16749 SW [kupdated]
8 16749 SW [mtdblockd]
44 16749 SWN [jffs2_gcd_mtd4]
71 16749 320 S klogd
73 16749 348 S syslogd -C 16
79 16749 272 S watchdog /dev/misc/watchdog
499 16749 344 S /usr/sbin/httpd -c /var/etc/httpd.conf -p 80 -h /www -r Freifunk Webadmin, Lo
511 16749 348 S /usr/sbin/crond -L /dev/null
517 16749 360 S /usr/bin/dropbear
663 16749 592 S olsrd -f /var/etc/olsrd.conf -d 0
714 16749 356 S udhcpc -i eth1 -b -p /var/run/eth1.pid
730 16749 340 S init
1432 16749 568 S /usr/bin/dropbear
1445 16749 508 S -ash
8869 16749 568 S /usr/bin/dropbear
8870 16749 508 S -ash
9657 16749 568 R /usr/bin/dropbear
9658 16749 504 S -ash
10395 16749 332 R ps
root at linksys:~# kismet
Segmentation fault
root at linksys:~# sh -x `which kismet`
Segmentation fault
root at linksys:~# sh
Segmentation fault
root at linksys:~#
root at linksys:~#
root at linksys:~# ipkg
Segmentation fault
root at linksys:~# reboot
More information about the WLANware
mailing list