Re: Load springt aus dem Nichts plötzlich auf 1 und bleibt da stehen
Steffen Winkler
freifunk at steffen-winkler.de
Sa Nov 3 19:15:31 CET 2018
So und jetzt mal die gleiche Firmware noch mal aktualisiert. Bis auf die
Load, sehe ich da keinen Unterschied.
Mem: 26388K used, 1820K free, 88K shrd, 2336K buff, 6396K cached
CPU: 0% usr 0% sys 0% nic 95% idle 0% io 0% irq 2% sirq
Load average: 0.02 0.08 0.08 1/50 4187
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
94 2 root SW 0 0% 2% [kworker/0:1]
2720 1 root R 1176 4% 1% /usr/bin/fastd --config -
--daemon --
251 2 root SW 0 0% 0% [kworker/u2:3]
7 2 root SW 0 0% 0% [kworker/u2:1]
4161 4156 root R 1180 4% 0% top
1905 1 root S 1700 6% 0% /sbin/netifd
3254 1 root S 1676 6% 0% /usr/sbin/hostapd -s -P
/var/run/wifi
2853 1 root S < 1184 4% 0% /usr/sbin/ntpd -n -N -S
/usr/sbin/ntp
4155 802 root S 1116 4% 0% /usr/sbin/dropbear -F -P
/var/run/dro
1687 1 root S 2036 7% 0% /usr/sbin/uhttpd -f -h
/www/ssl -r Li
1 0 root S 1528 5% 0% /sbin/procd
1686 1 root S 1296 5% 0% /usr/sbin/uhttpd -f -h
/www/public -r
1688 1 root S 1280 5% 0% /usr/sbin/uhttpd -f -h
/www/hood -r L
2878 1 root S 1236 4% 0% /usr/sbin/macnock eth1.3
Forchheim
735 1 root S 1224 4% 0% /sbin/logd -S 64
416 1 root S 1180 4% 0% /sbin/ubusd
4156 4155 root S 1180 4% 0% -ash
3334 1905 root S 1180 4% 0% udhcpc -p
/var/run/udhcpc-eth0.pid -s
802 1 root S 1048 4% 0% /usr/sbin/dropbear -F -P
/var/run/dro
2509 1 root S 1004 4% 0% /usr/sbin/alfred -i br-mesh
-b none
Am 03.11.2018 um 18:23 schrieb Steffen Winkler:
> Mit top auf den https://monitoring.freifunk-franken.de/routers/6549
> gegangen
>
> Mem: 21832K used, 6376K free, 84K shrd, 1512K buff, 3148K cached
> CPU: 0% usr 0% sys 0% nic 97% idle 0% io 0% irq 1% sirq
> Load average: 1.06 1.03 1.01 1/50 2303
> PID PPID USER STAT VSZ %VSZ %CPU COMMAND
> 94 2 root SW 0 0% 1% [kworker/0:1]
> 2279 2 root SW 0 0% 0% [kworker/u2:2]
> 1571 2 root SW 0 0% 0% [kworker/u2:1]
> 1597 528 root R 1180 4% 0% top
> 8454 1 root S 1676 6% 0% /usr/sbin/hostapd -s -P
> /var/run/wifi
> 1 0 root S 1528 5% 0% /sbin/procd
> 2678 1 root D 1176 4% 0% /usr/bin/fastd --config -
> --daemon --
> 527 802 root S 1116 4% 0% /usr/sbin/dropbear -F -P
> /var/run/dro
> 1687 1 root S 1896 7% 0% /usr/sbin/uhttpd -f -h
> /www/ssl -r Li
> 1868 1 root S 1700 6% 0% /sbin/netifd
> 1686 1 root S 1296 5% 0% /usr/sbin/uhttpd -f -h
> /www/public -r
> 1688 1 root S 1280 5% 0% /usr/sbin/uhttpd -f -h
> /www/hood -r L
> 2836 1 root S 1236 4% 0% /usr/sbin/macnock eth1.3
> Forchheim
> 735 1 root S 1224 4% 0% /sbin/logd -S 64
> 416 1 root S 1184 4% 0% /sbin/ubusd
> 7823 1 root S < 1180 4% 0% /usr/sbin/ntpd -n -N -S
> /usr/sbin/ntp
> 528 527 root S 1180 4% 0% -ash
> 7744 1868 root S 1180 4% 0% udhcpc -p
> /var/run/udhcpc-eth0.pid -s
> 802 1 root S 1048 4% 0% /usr/sbin/dropbear -F -P
> /var/run/dro
> 7875 1 root S 1004 4% 0% /usr/sbin/alfred -i br-mesh
> -b none
>
> Grüße von Steffen
>
>
> Am 02.11.2018 um 13:55 schrieb Adrian Schmutzler:
>> Zusätzlich zu Christians Antwort:
>>
>> Ich hatte sowas gelegentlich, manchmal hilft Neustart, hatte auch
>> schon einen Fall wo es nur durch Flashen (der selben) Firmware wieder
>> wegging.
>>
>> Grüße
>>
>> Adrian
>>
>>> -----Original Message-----
>>> From: franken [mailto:franken-bounces at freifunk.net] On Behalf Of
>>> Steffen
>>> Winkler
>>> Sent: Freitag, 2. November 2018 11:23
>>> To: freifunk in franken <franken at freifunk.net>
>>> Subject: Load springt aus dem Nichts plötzlich auf 1 und bleibt da
>>> stehen
>>>
>>> Hallo zusammen,
>>>
>>> ich habe ein komisches Verhalten bei 2 von meinen Routern gesehen:
>>>
>>> https://monitoring.freifunk-franken.de/routers/6549 der ist nun offline
>>> gegangen
>>>
>>> https://monitoring.freifunk-franken.de/routers/6853 den hatte ich
>>> selbst
>>> abgesteckt
>>>
>>> Kennt das wer?
>>>
>>> Grüße von Steffen
>>>
Mehr Informationen über die Mailingliste franken