Firmware 20180802 released

mail at adrianschmutzler.de mail at adrianschmutzler.de
So Aug 5 23:35:15 CEST 2018


Hallo,

du bist doch in Hof, oder?

Da ist irgendwas im ULA-Routing kaputt, ich komme aus einer anderen Hood per fd43 auch nicht auf meine Router in HofV2.

Ich wende mich bei Gelegenheit nochmal an den Gatewaybetreiber.

Wenn es um eine andere Hood geht, dann hier nochmal melden.

Grüße

Adrian

> -----Original Message-----
> From: franken [mailto:franken-bounces at freifunk.net] On Behalf Of Marc
> Schenk
> Sent: Sonntag, 5. August 2018 18:04
> To: 'Freifunk Franken' <franken at freifunk.net>; franken-dev at freifunk.net
> Subject: AW: Firmware 20180802 released
> 
> Hallo liebe Firmwarebauer,
> 
> habe bei einem meiner Knoten das Release gezogen. Das Upgrade hat auch
> sehr gut funktioniert (841 V10).
> Mit der V2 funktioniert ja laut Wiki der Zugriff Hoodübergreifend, richtig?
> Das habe ich mittels der fd43*** auch probiert, scheitere aber. Verbinde ich
> mich in die Hood des V2 Knotens, dann klappt der Zugriff.
> Hat jemand eine Idee, was das sein könnte, oder habe ich etwas falsch
> gelesen oder interpretiert?
> 
> Danke für die Antworten.
> 
> Gruß
> 
> Marc
> 
> > -----Ursprüngliche Nachricht-----
> > Von: franken <franken-bounces at freifunk.net> Im Auftrag von Tim
> > Niemeyer
> > Gesendet: Sonntag, 5. August 2018 15:32
> > An: franken-dev at freifunk.net; franken at freifunk.net
> > Betreff: Firmware 20180802 released
> >
> > Hi
> >
> > Nun ist es endlich soweit. Die Firmware in der Version 20180802 ist
> released.
> > Dies ist die erste Firmware, welche das sogenannte "V2"
> > implementiert.
> >
> > Macht euch vor den Update bitte einen Überblick, was "V2" für eure
> > Installationen bedeutet. Dies kann man anhand der sehr gut gelungenen
> > Dokumentation im Wiki machen:
> > https://wiki.freifunk-franken.de/w/KeyXchangeV2
> >
> > Beachtet bitte insbesondere den Abschnitt zum Upgrade von Freifunk
> > Knoten:
> > https://wiki.freifunk-
> >
> franken.de/w/KeyXchangeV2#Gefahren_eines_Updates_vom_alten_Syste
> > m
> >
> > Größte Änderungen auf einen Blick seit 20170918:
> > * Code-Cleanups
> > * Data processing notes
> > * Update Tunneldigger (L2TPv3)
> > * Batman Upgrade
> > * Mesh über 802.11s
> > * KeyXchangeV2
> > ** Hood übergreifende IPv6 ULA Adressen
> > ** Verbindungen zu dezentralen Hoods möglich
> > ** Eigene ESSID pro Hood
> > ** Macnocker ist Teil der Firmware
> > ** Config-AP eingeführt
> > * 1043v5 Support
> > * Unifi AC Mesh Support
> >
> > Die Firmware befindet sich am üblichen Ort:
> > https://dev.freifunk-franken.de/firmware/20180802/
> >
> > Sollten euch Probleme bei der Benutzung der Firmware auffallen, scheut
> > euch nicht diese Probleme in den Bug-Tracker einzutragen. Dazu einfach
> > einen Account anlegen und einen neuen Eintrag erfassen:
> > https://mantis.freifunk-franken.de
> >
> > Ich bedanke mich für die vielen Beiträge und die super Diskussionen.
> >
> > Unten, wie immer, das Shortlog.
> >
> > Tim
> >
> > --
> > Adrian Schmutzler (70):
> >       fff-nodewatcher: Use mac address instead of standard node name
> >       buildscript: Update LEDE and packages, use lede git mirror
> >       Archer C25: Update qca9887 firmware to 10.2.4-1.0-00029
> >       vpn-select: Use keyxchangev2data instead of fastd_fff_output
> >       Remove references to community.cfg
> >       fff-web: Show hood in public and internal web interface
> >       Configure the Node a routable IPv6 ULA
> >       fff-hoods: Fix fe80::1 for multiple configap interfaces
> >       fff-hoods: Fix case of missing keyxchangev2data
> >       Utilize PKG_NAME in Makefiles
> >       Revert "Archer C25: Disable 5 GHz to provide working firmware"
> >       buildscript: Fix typo
> >       fff-hoods: Use channel provided by gateway
> >       fff-hoods: Introduce sector files for custom settings
> >       fff-hoods: Use variables for hood file names
> >       fff-hoods: Use w5sta for download
> >       fff-hoods: Fix missing commit for hood name
> >       fff-network/fff-hoods: Create functions for IPv6 rewriting
> >       CPE210: Fix ROUTERMAC
> >       fff-web: Extend switch port assignment display in ports.html
> >       fff-boardname: Reorganize WR841 boardnames
> >       Add TL-WR1043N v5
> >       fff-network: Fix mac adresses not set during merge/rebase
> >       fff-hoods/fff-wireless: Don't delete WiFi devices
> >       fff-hoods: Suppress warning for missing sectorfile
> >       Support subtarget in buildscript
> >       fff-web: Fix style and XHTML conformity in upgrade.html
> >       show_info: Add assignment without switch
> >       fff-web: Show WiFi channels and SSID
> >       show_info: Display hood information
> >       Rearrange fff config values into their own config file
> >       fff-support: Update PoE passthrough code
> >       fff-web: Added options to disable update notification
> >       fff-web: Include new options into settings.html
> >       fff-web/show_info: Put common code into function
> >       fff-network: Fix second occurrence of ROUTERMAC and ETHMESHMAC
> >       fff-web: Allow minus (-) in passwords
> >       fff-network: Commit only network
> >       configurehood: Wait for the config AP to build when in sta mode
> >       configurehood: Prevent connecting two hoods
> >       nodewatcher: Provide additional information about WiFi interfaces
> >       LEDE: Go back to OpenWRT sources
> >       configurenetwork: Put One- and Two-Port pre-setup into function
> >       fff-network/fff-hoods: Only use MAC address in network lib
> >       fff-network: Calculate IPv6 using ROUTERMAC variable
> >       nodewatcher: Fix bugs in gateway list creation
> >       fff-hoods: Replace hiddenapflag by check for real conditions
> >       fff-sysupgrade/fff-hoods: Make sectorfile upgradesafe
> >       GL-AR150: Fix ETHMESHMAC
> >       fff-hoods: Restart alfred after keyxchange file update
> >       fff-nodewatcher: Add detailed clients data
> >       nodewatcher: Provide data to calculate airtime
> >       fff-web: Fix two bugs in wifiscan.html
> >       configurehood: Improve conditions for configap setup
> >       packages/fff: Split fff-hoods into two packages
> >       fff-web: UPGRADE_PATH in header should be taken from hood file
> >       configurehood: Fix "wifi" blocking correct network status detection
> >       alfred: Support interfaces IDs with more than two digits
> >       Unifi AC: remove bs-partition ro-flag
> >       configurenetwork: Improve output when setting IPv6 addresses
> >       fff-batman-adv: Remove vis_mode from uci config
> >       Data processing notes: Add in fff-web
> >       Data processing notes: Add for SSH access
> >       hood files: Use more meaningful and concise naming scheme
> >       hood file: Use different files for www and for checksum comparison
> >       configurehood: Only provide hood file from GW/KeyXchange via WWW
> >       hood files: Move files from /www to /tmp and link there
> >       configurehood: Don't remove timestamp for checksum comparison
> >       nodewatcher: Change mechanism for client device detection
> >       vpn-select: Demand hood file to be provided as argument
> >
> > Christian Dresel (7):
> >       Update Batman to compat15
> >       Reconfigure fff-wireless for keyxchangev2
> >       Reconfigure vpn-select for keyxchangev2
> >       Add fff-hoods
> >       Add support for Unifi AC Mesh
> >       fff-hoods: Make possible to use fixed hoodfile
> >       Disable VPN if not in use
> >
> > Fabian Blaese (12):
> >       Support batman-adv meshing over 802.11s
> >       consistently use same webserver port for hoodfile on wifi and lan
> >       fff-network: evaluate macaddress in device config
> >       Use SWITCHDEV variable for mac address fixing
> >       configurehood: Allow for spaces after identifier
> >       fff-network: Get MAC from wifi device instead of wifi network
> >       CPE510: Add ROUTERMAC
> >       Revert openwrt patch which caused too high tx powers
> >       Move hoodfile acquisition into function
> >       Allow initial configuration from Ethernet
> >       Remove sectorfile for first release
> >       Add batman-adv patch to remove gw mode switch message
> >
> > Robert Langhammer (7):
> >       fff-hoods: fix sed to substitute timestamp
> >       fastd: generate the key from urandom
> >       Update tunneldigger
> >       fff-network: correct path to iptables
> >       Update tunneldigger
> >       Remove double equals.
> >       Remove double square bracket. [[ is a bash or ksh built-in, and
> > cannot be used in a #!/bin/sh script.
> >
> > Tim Niemeyer (14):
> >       fff-hoods: only delete hiddenapfile if ap was configured
> >       fff-hoods: move hiddenapfile variable
> >       fff-alfred: new package
> >       fff-alfred: do not use bat0 for master selection
> >       WR841-v7: get routermac from phy0 instead of wlan0
> >       bsp/default: move network sysctl's to fff-network
> >       fff-network: move sysctl settings to a function
> >       fff-firewall: clean up v6 rules on prepare
> >       fff-network: rework sysctl's
> >       fff-network: enable forwarding; filter forwarding
> >       fff-macnock: new package
> >       fff-hoods: set hood to none if on station mode
> >       fff-hoods: call reload_config after uci commit
> >       Revert "configurehood: Prevent connecting two hoods"





Mehr Informationen über die Mailingliste franken