[Freifunk Franken] Neues Release der Firmware 20170110
Christian Dresel
fff at chrisi01.de
So Jan 15 17:41:17 CET 2017
Hi
heute hab ich mal wirklich Glück :)
In meiner Kiste fand ich noch ne Picostation, in der anderen Kiste einen
Schraubenzieher um sie zu öffnen, in der 3. nen 3,3V UART Adapter und
das größte Glück: Ubiquiti ist so nett und lötet die Steckpfosten gleich
drauf, ein Lötkolben hätte sich nicht in meiner Kiste befunden ;)
Ich kann das Problem ansich bestätigen, ich schieb die Diskussion mal
weiter auf die dev Liste. Im Anhang mein UART Zeug (leider hat minicom
bisschen rumgespackt und den Anfang weggeschnitten, ich hoffe das stört
nicht?! Wenn doch Info an mich, dann flashe ich nochmal neu).
Hab den Bug im Mantis gemeldet:
https://mantis.freifunk-franken.de/view.php?id=26
mfg
Christian
On 15.01.2017 17:03, Martin wrote:
> Hallo zusammen,
> kann das Problem mit der Pico leider bestätigen.
> Ohne Stromversorgungsunterbrechung kommt die Pico nicht wieder zurück.
>
> Schade.
>
>
>
> 2017-01-15 10:43 GMT+01:00 Holger Preuß <hpreuss at live.de
> <mailto:hpreuss at live.de>>:
>
> Super !
>
> Danke an alle, die mitgearbeitet haben.
>
> Info:
> Upgrade hat bei meinem 1043 v3 problemlos geklappt.
> Bei meiner Picostation mußte ich nach dem Upgrade die
> Spannungsversorgung mal unterbrechen,
> von allein wollte sie nicht wieder starten.
>
> VG
> Holger Preuß
>
>
>
>
>
> *Von: *Tim Niemeyer <mailto:tim at tn-x.org>
> *Gesendet: *Samstag, 14. Januar 2017 17:28
> *An: *franken at freifunk.net <mailto:franken at freifunk.net>;
> franken-dev at freifunk.net <mailto:franken-dev at freifunk.net>
> *Betreff: *[Freifunk Franken] Neues Release der Firmware 20170110
>
>
>
> Hallo
>
> Wir freuen uns heute die neue Firmware 20170110 verkünden zu können.
>
> Größte Änderungen auf einen Blick:
> * Support CPE210
> * Integration von L2TPv3
> * Support Unifi AP
> * Copy netmon coordinates
> * Remove AUX
> * Shorten Custom Image names
> * Support for Archer C7
> * Support 841-v11 region codes
> * Div. fixes
> * Updated OpenWRT and Packages
>
> Known-Issues:
> * No adhoc WiFi on Archer C7
> * wr1043-v4 not supported
> * TL-WA850RE v2 not supported
>
> Die Firmware befindet sich am üblichen
> Ort:https://dev.freifunk-franken.de/firmware/20170110/
> <https://dev.freifunk-franken.de/firmware/20170110/>
> Das sysupgrade.sh sollte weiter funktionieren, auch wenn sich die
> Dateinamen ein paar mal geändert haben. Der Server sollte die Anfragen
> entsprechend umwandeln und korrekt ausliefern. Sollte es Probleme geben,
> bitte melden.
>
> Sollten euch Probleme bei der Benutzung der Firmware auffallen, scheut
> euch nicht diese Probleme in den Bug-Tracker
> https://mantis.freifunk-franken.de
> <https://mantis.freifunk-franken.de> einzutragen. Dazu einfach einen
> Account anlegen und einen neuen Eintrag erfassen.
>
> Ich bedanke mich für die vielen Beiträge und die super Diskussionen.
> Unten, wie immer, das Shortlog.
>
> Lieben Gruß
> auch aus dem IRC irc://freenode.net/freifunk-franken
> <http://freenode.net/freifunk-franken>
>
> --
> Christian Dresel (3):
> Not Cache the WebUI
> Add support for Ubiquiti Unifi AP
> Increase SSH Connection Limit
>
> Jan Kraus (12):
> renamed package feed "batman_adv" to the correct name "gluon"
> Moved network configuration script to own package
> Changed description of upgrade function in WebUI
> Fixed l2tp kernel patch
> fixed typo in package description
> Added script parameter to sysupgrade Script
> Added an automatism which will retrive Router-Coordinates from the
> old Netmon system
> Fixed Problem with port mode changing
> Fixed Problems with Port mode changing
> Added support for Archer C7 v2
> Fixed offset warnings at prepare
> Fixed unwanted reboot every 5 Minutes after -n flash
>
> Jan-Tarek Butt (2):
> sed version number to current commit if no tag describe exists
> fix patching error by empty build_patches dir
>
> Marco Hald (1):
> Updated Openwrt-Routing repository revision
>
> Robert Langhammer (9):
> fff-fastd: remove fastdstart and add some uci-defaults
> Add fff-tunneldigger
> Add package fff-vpn-select
> fff-vpn-select: add fastd start/stop for various situations
> fff-vpn-select: add missing "/"
> Update OpenWrt revision
>
> Stefan Waigand (1):
> WebUI: show MAC and encryption in wifi scan
>
> Steffen Pankratz (11):
> Removed aux community, not needed anymore.
> Use official OpenWrt project name spelling.
> buildscript: shortened firmware image file names
> Moved wget dependency to correct package.
> Updated OpenWrt package repository revision.
> Updated OpenWrt repository revision.
> Updated Gluon repository revision.
> Nodewatcher: interpret 'description' and 'position_comment' purely
> as textual data
> Temporarily added tunneldigger package as a fff package.
> Updated OpenWrt package repository revision.
> fff-nodewatcher: fixed typo
>
> Tim Niemeyer (28):
> buildscript: buildall: remove community parameter
> buildscript: set or load bsp/community in function
> buildscript: buildall: call functions
> buildscript: buildrelease: fix parameter handling
> buildscript: do not create .orig files during patch
> bsp/default/config/network: fix mtu
> fff-sysupgrade: move sysupgrade.sh to package
> fff-wireless: new package to configure wifi
> bsp: merge wdr4300 to ar71xx
> fff-boardname: mv rc.local board detect to package
> bsp/default: remove obsolete qos
> fff-timeserver: new package to configure a timeserver
> fff-network: move default-bsp files to package
> fff-nodewatcher: self-detect client interfaces
> fff-nodewatcher: style: remove unused code
> fff-nodewatcher: style: unify to spaces
> fff-nodewatcher: style: fix some long lines
> fff-nodewatcher: add platform as chipset
> fff-nodewatcher: fastd version only if installed
> fff-nodewatcher: fix shellcheck warnings
> fff-nodewatcher: bump version
> buildscript: add tunneldigger from wlanslovenija
> fff-sysupgrade: add wget as dependency
> openwrt: backport lede patch for tp-link images
> buildscript: copy the (optional) -eu/-us factory images
> openwrt: tp-link region code for wr841-v11
> openwrt: support region code of cpe2x0/5x0
> openwrt: fix ntp init to accept link local addr
>
> Tobias Klaus (9):
> adds support for tp-link cpe210
> more explanation for network.mode file
> adds optional script to enable poe passthrough on cpe210
> fff-support: fixes build for non ar71xx machines
> makes fff-web config a uci-defaults script
> makes nodewatcher config a uci-defaults script
> makes batman-adv config a uci-defaults script
> fixes uhttpd-config for initial flash
> Backport: enable LNA for CPE210
>
> _______________________________________________
> franken mailing list
> franken at freifunk.net <mailto:franken at freifunk.net>
> http://lists.freifunk.net/mailman/listinfo/franken-freifunk.net
> <http://lists.freifunk.net/mailman/listinfo/franken-freifunk.net>
>
>
>
>
> _______________________________________________
> franken mailing list
> franken at freifunk.net
> http://lists.freifunk.net/mailman/listinfo/franken-freifunk.net
>
-------------- nächster Teil --------------
[ 38.840000] tun: Universal TUN/TAP device driver, 1.6
[ 38.840000] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 38.850000] l2tp_core: L2TP core driver, V2.0
[ 38.860000] l2tp_netlink: L2TP netlink interface
[ 38.870000] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 38.880000] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 38.880000] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 38.900000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 38.950000] batman_adv: B.A.T.M.A.N. advanced 2013.4.0 (compatibility version d
[ 38.980000] u32 classifier
[ 38.980000] input device check on
[ 38.980000] Actions configured
[ 38.990000] Mirror/redirect action on
[ 39.000000] nf_conntrack version 0.5.0 (447 buckets, 1788 max)
[ 39.100000] arp_tables: (C) 2002 David S. Miller
[ 39.110000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf8
[ 39.120000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[ 39.170000] Ebtables v2.0 registered
[ 39.180000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 39.640000] xt_time: kernel timezone is -0000
[ 39.910000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 39.920000] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
[ 39.950000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[ 50.410000] IPv6: ADDRCONF(NETDEV_UP): br-mesh: link is not ready
[ 54.440000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
[ 54.460000] device w2ap entered promiscuous mode
[ 54.490000] br-mesh: port 1(w2ap) entered forwarding state
[ 54.490000] br-mesh: port 1(w2ap) entered forwarding state
[ 54.500000] IPv6: ADDRCONF(NETDEV_CHANGE): w2ap: link becomes ready
[ 54.520000] IPv6: ADDRCONF(NETDEV_CHANGE): br-mesh: link becomes ready
[ 55.120000] IPv6: ADDRCONF(NETDEV_UP): w2mesh: link is not ready
[ 55.180000] w2mesh: Created IBSS using preconfigured BSSID 02:ca:ff:ee:ba:be
[ 55.190000] w2mesh: Creating new IBSS network, BSSID 02:ca:ff:ee:ba:be
[ 55.190000] IPv6: ADDRCONF(NETDEV_CHANGE): w2mesh: link becomes ready
[ 55.580000] batman_adv: bat0: Adding interface: w2mesh
[ 55.590000] batman_adv: bat0: Interface activated: w2mesh
[ 56.000000] batman_adv: bat0: Changing gw mode from: off to: client
[ 56.030000] batman_adv: bat0: gw_sel_class: Changing from: 20 to: 1
[ 56.030000] batman_adv: bat0: network_coding: Changing from: enabled to: disabd
[ 56.490000] br-mesh: port 1(w2ap) entered forwarding state
[ 59.360000] random: nonblocking pool is initialized
[ 63.950000] br-mesh: port 1(w2ap) entered disabled state
[ 63.950000] device w2ap left promiscuous mode
[ 63.960000] br-mesh: port 1(w2ap) entered disabled state
[ 64.190000] batman_adv: bat0: Interface deactivated: w2mesh
[ 64.190000] batman_adv: bat0: Removing interface: w2mesh
[ 65.180000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 69.090000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 70.970000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 70.990000] IPv6: ADDRCONF(NETDEV_UP): br-mesh: link is not ready
[ 72.580000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
[ 72.610000] device w2ap entered promiscuous mode
[ 72.620000] br-mesh: port 1(w2ap) entered forwarding state
[ 72.620000] br-mesh: port 1(w2ap) entered forwarding state
[ 72.690000] IPv6: ADDRCONF(NETDEV_CHANGE): w2ap: link becomes ready
[ 72.690000] IPv6: ADDRCONF(NETDEV_CHANGE): br-mesh: link becomes ready
[ 73.100000] IPv6: ADDRCONF(NETDEV_UP): w2mesh: link is not ready
[ 73.130000] w2mesh: Created IBSS using preconfigured BSSID 02:ca:ff:ee:ba:be
[ 73.140000] w2mesh: Creating new IBSS network, BSSID 02:ca:ff:ee:ba:be
[ 73.150000] IPv6: ADDRCONF(NETDEV_CHANGE): w2mesh: link becomes ready
[ 73.810000] br-mesh: port 1(w2ap) entered disabled state
[ 73.830000] device w2ap left promiscuous mode
[ 73.830000] br-mesh: port 1(w2ap) entered disabled state
[ 73.920000] IPv6: ADDRCONF(NETDEV_UP): br-mesh: link is not ready
[ 74.830000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
[ 76.370000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
[ 77.800000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
[ 78.370000] IPv6: ADDRCONF(NETDEV_UP): br-mesh: link is not ready
[ 82.090000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 82.120000] IPv6: ADDRCONF(NETDEV_UP): br-mesh: link is not ready
[ 83.620000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
[ 83.630000] device w2ap entered promiscuous mode
[ 83.660000] br-mesh: port 1(w2ap) entered forwarding state
[ 83.660000] br-mesh: port 1(w2ap) entered forwarding state
[ 83.670000] IPv6: ADDRCONF(NETDEV_CHANGE): w2ap: link becomes ready
[ 83.690000] IPv6: ADDRCONF(NETDEV_CHANGE): br-mesh: link becomes ready
[ 84.140000] IPv6: ADDRCONF(NETDEV_UP): w2mesh: link is not ready
[ 84.200000] w2mesh: Created IBSS using preconfigured BSSID 02:ca:ff:ee:ba:be
[ 84.210000] w2mesh: Creating new IBSS network, BSSID 02:ca:ff:ee:ba:be
[ 84.210000] IPv6: ADDRCONF(NETDEV_CHANGE): w2mesh: link becomes ready
[ 84.880000] br-mesh: port 1(w2ap) entered disabled state
[ 84.920000] device w2ap left promiscuous mode
[ 84.930000] br-mesh: port 1(w2ap) entered disabled state
[ 85.000000] IPv6: ADDRCONF(NETDEV_UP): br-mesh: link is not ready
[ 85.930000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
[ 87.470000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
[ 89.500000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
[ 90.260000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 93.970000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 93.980000] IPv6: ADDRCONF(NETDEV_UP): br-mesh: link is not ready
[ 95.530000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
[ 95.570000] device w2ap entered promiscuous mode
[ 95.590000] br-mesh: port 1(w2ap) entered forwarding state
[ 95.600000] br-mesh: port 1(w2ap) entered forwarding state
[ 95.600000] IPv6: ADDRCONF(NETDEV_CHANGE): w2ap: link becomes ready
[ 95.630000] IPv6: ADDRCONF(NETDEV_CHANGE): br-mesh: link becomes ready
[ 96.010000] IPv6: ADDRCONF(NETDEV_UP): w2mesh: link is not ready
[ 96.060000] w2mesh: Created IBSS using preconfigured BSSID 02:ca:ff:ee:ba:be
[ 96.070000] w2mesh: Creating new IBSS network, BSSID 02:ca:ff:ee:ba:be
[ 96.070000] IPv6: ADDRCONF(NETDEV_CHANGE): w2mesh: link becomes ready
[ 96.750000] br-mesh: port 1(w2ap) entered disabled state
[ 96.800000] device w2ap left promiscuous mode
[ 96.800000] br-mesh: port 1(w2ap) entered disabled state
[ 96.820000] IPv6: ADDRCONF(NETDEV_UP): br-mesh: link is not ready
[ 98.290000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
[ 100.620000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
[ 102.080000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
root at SchlagDenAlfred:/# ifconfig
br-mesh Link encap:Ethernet HWaddr 00:27:22:80:F2:CA
inet6 addr: fdff::27:2280:f2ca/64 Scope:Global
inet6 addr: fdff::227:22ff:fe80:f2ca/64 Scope:Global
inet6 addr: fdff::1/64 Scope:Global
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 02:27:22:80:F2:CA
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:4
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:18 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1476 (1.4 KiB) TX bytes:1476 (1.4 KiB)
root at SchlagDenAlfred:/#
-------------- nächster Teil --------------
Ein Dateianhang mit Binärdaten wurde abgetrennt...
Dateiname : signature.asc
Dateityp : application/pgp-signature
Dateigröße : 819 bytes
Beschreibung: OpenPGP digital signature
URL : <http://lists.freifunk.net/mailman/private/franken-freifunk.net/attachments/20170115/4797ad74/attachment.sig>
Mehr Informationen über die Mailingliste franken