[Freifunk Franken] Hilfe Router zuckt nicht nehr!
Ihno Krumreich
ihno at lst.de
Sa Mär 19 21:11:31 CET 2016
Hallo Tom,
anbei die Bildschirm und Kommandoausgaben.
Gruss
Ihno
On Sat, Mar 19, 2016 at 08:49:06PM +0100, Tom Green wrote:
> Hi,
>
> Vermutlich hat Mr. Crumble recht: Deine Upload-Kapazität reicht nicht.
> Ist der Anschluss für den der Router vorgesehen war was fetter? Dann
> schließ ihn einfach mal da an.
>
> Wenn Du weitersuchen möchtest:
>
> Was gibt er denn im Webinterface aus (siehe Screenshot)?
>
> Wenn per ssh draufkommst, kannst mal die Ausgabe von
> -> ps
> -> route
> -> dmesg
> -> ifconfig
> mitschicken...
>
>
> Btw: Port 1 &2 werden fürs meshen von Routern übers Netzwerkkabel
> untereinander benuntzt. Port 3&4 für Clients.
>
> Gruß
> t.g.
>
>
> On 19.03.2016 20:40, Ihno Krumreich wrote:
> > Hallo,
> >
> > On Sat, Mar 19, 2016 at 07:42:53PM +0100, Tom Green wrote:
> >> Hallo,
> >>
> >> also versuchen wir uns mal in Ferndiagnosen ;)
> >>
> >> 1. Wird der FF-Router im DSL Router als Netzwerkgerät angezeigt? Der FF
> >> Router ist über die blaue WAN-Buchse verbunden?
> > Er hat eine IP-Adresse zugewiesen bekommen und ist ueber die blaue WAN Buchse
> > verbunden.
> >
> >> 2. Das Tablet ist ein Android? Mal mit dem Notebook versucht Zugriff auf
> >> http://[fdff::1] zu nehmen?
> > Das Tablet ist ein Android.
> >
> > Mit dem Notebook habe ich das ohne Erfolg probiert.
> >
> >> 3. Mal das Notebook an einen Client Port anschließen (3ter oder 4ter vom
> >> blauen WAN-Port aus gezählt) und versuchen Zugriff auf [fdff::1] zu nehmen
> > Ich hatte das Ntebook am 2.ten Port. Wenn ich es auf den dritten stecke
> > erhalte ich eine fdff-Adresse und kann via fdff::1 ueber den Browser
> > zugreifen.
> >
> >> 4. Klappt der Zugriff auf http://[fdff::1], wenn du den FF-Router wieder
> >> vom DSL trennst?
> > Wenn ich am dritten Port bin scheine ich das nicht zu brauchen.
> >
> >> 5. Mal den Router 10.. 15 Minuten Zeit lassen. Der WAN-Tunnel wird nach
> >> spätestens 5:30 Minuten nach dem Einschalten / verbinden aufgebaut.
> > Die Zeit hatte er nun. Aber in der Liste der Router taucht erimmer noch nicht
> > auf.
> >
> > Vielen Dank
> >
> > Gruss
> >
> > Ihno
> >
> >> Gruß
> >> Tom
> >>
> >>
> >>
> >> On 19.03.2016 19:17, Ihno Krumreich wrote:
> >>> Hi
> >>>
> >>> ich will gerade einen router (TP-Link TL-WR841N Version 10) fuer
> >>> die Fluechtlingsunterkunft in Kleinsendenbach einrichten.
> >>>
> >>> ich bin nach https://wiki.freifunk-franken.de/w/Anleitungen vorgegangen.
> >>>
> >>> Den Router geflasht und anschlissend via http://[fdff::1] auf den Router
> >>> gegangen (per ssh einloggen ging auch) und die Einstellungen gemacht.
> >>> Und neu gestartet.
> >>>
> >>> Bis zu diesem Zeitpunkt war der Router nur ueber einen Ethernetport mit
> >>> meinem Laptop verbunden.
> >>>
> >>> Dann habe ich ihn ueber den blauen Port an die grosse weite Welt angeschlossen.
> >>> D.h. ueber meinen etwas schwachen DSL zugang (480 Kbit).
> >>> Dann habe ich mich bei FFF Monitoring registriert und warte seit dem das der Router
> >>> dort auftaucht.
> >>>
> >>> Als WLAN netz kann ich franken.freifunk.net sehen. Mein Tablet versucht auch sich anzumelden.
> >>> Aber beim Versuch bleibt es.
> >>>
> >>> Dann habe ich meinen Laptop wieder an einen Ethernetport des Routers angeschlossen,
> >>> aber er spendiert mir keine fdff::xxx Adresse.
> >>>
> >>> Irgentwie habe ich den Eindruck das etwas schief gelaufen ist.
> >>>
> >>> Kann mir jemand bitte einen Tip geben?
> >>>
> >>> Gruss
> >>>
> >>> Ihno
> >>>
>
--
----
Ihno at lst.de
"Never trust a computer you can lift."
-------------- nächster Teil --------------
Der Bildschirminhalt:
System
Name: OpenWrt (KSB)
Modell: TP-Link TL-WR841N/ND v10
MAC-Adresse: f4:f2:6d:40:4a:b6
Bekannte Knoten: 1
Nachbarknoten: 0
VPN aktiv: Ja
Laufzeit: 2:26
Auslastung: 0.15, 0.06, 0.05
System: Linux 3.18.27 mips
Uhrzeit: Sat Mar 12 03:40:35 CET 2016
Netz: Freifunk
Nutzer: 1
Empfangen: 123 KB
Gesendet: 206 KB
IPv4 Adressen:
-
IPv6 Adressen:
fdff::f6f2:6dff:fe40:4ab6
fdff::1
fdff::f4f2:6d40:4ab6
fe80::f6f2:6dff:fe40:4ab6
Netz: WAN
Internet Vorhanden: Ja
Empfangen: 2.4 MB
Gesendet: 143 KB
IPv4 Adressen:
192.168.178.138
IPv6 Adressen:
fe80::f6f2:6dff:fe40:4ab7
Software
Firmware Version: 20160310
OpenWrt Version: OpenWrt Chaos Calmer 15.05
Batman-Adv Version: 2013.4.0
Fastd Version: v17
t at OpenWrt (KSB):~# ps
PID USER VSZ STAT COMMAND
1 root 1468 S /sbin/procd
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
5 root 0 SW< [kworker/0:0H]
7 root 0 SW< [khelper]
28 root 0 SW< [writeback]
60 root 0 SW< [bioset]
63 root 0 SW< [kblockd]
65 root 0 SW [kswapd0]
66 root 0 SW [kworker/0:1]
67 root 0 SW [fsnotify_mark]
150 root 0 SW [spi0]
246 root 0 SW< [deferwq]
319 root 0 SW [kworker/0:2]
349 root 0 SWN [jffs2_gcd_mtd3]
401 root 888 S /sbin/ubusd
402 root 772 S /sbin/askfirst /bin/ash --login
580 root 0 SW< [ipv6_addrconf]
598 root 0 SW< [bat_events]
718 root 0 SW< [cfg80211]
850 root 1044 S /sbin/logd -S 16
917 root 1152 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 22 -K 300
930 root 1104 S /usr/sbin/uradvd -i br-mesh -p fdff:0::/64
937 root 784 S /usr/sbin/micrond /usr/lib/micron.d
1182 root 1564 S /sbin/netifd
1510 root 1108 S /usr/sbin/alfred -i br-mesh -b bat0
1526 root 1628 S /usr/sbin/hostapd -P /var/run/wifi-phy0.pid -B /var/run/hostapd-phy0.conf
1642 root 3284 S fastd -c /etc/fastd/fff/fff.conf -d --pid-file /var/run/fastd.fff.pid
1669 root 1356 S ntpd -p fe80::ff:feee:1%br-mesh
6164 root 1360 S udhcpc -p /var/run/udhcpc-eth1.pid -s /lib/netifd/dhcp.script -f -t 0 -i eth1 -C
6893 root 1376 S /usr/sbin/uhttpd -f -h /www/public -r OpenWrt (KSB) -c _ -x /cgi-bin -t 60 -T 30 -A 1 -n 3 -R -p 80
6894 root 2092 S /usr/sbin/uhttpd -f -h /www/ssl -r OpenWrt (KSB) -c /etc/httpd.conf -x /cgi-bin -t 60 -T 30 -A 1 -n 3 -R -C /etc/uhttpd.crt -K /etc/uhttpd.key -s 443
7288 root 0 SW [kworker/u2:1]
7484 root 0 SW [kworker/u2:0]
7741 root 0 SW [kworker/u2:2]
7749 root 1220 R /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 22 -K 300
7750 root 1364 S -ash
7760 root 1360 R ps
root at OpenWrt (KSB):~#
root at OpenWrt (KSB):~# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default my.router 0.0.0.0 UG 0 0 0 eth1
192.168.178.0 * 255.255.255.0 U 0 0 0 eth1
192.168.178.1 * 255.255.255.255 UH 0 0 0 eth1
root at OpenWrt (KSB):~#
root at OpenWrt (KSB):~# dmesg
[ 0.000000] Linux version 3.18.27 (reddog at buildmaster) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r48925) ) #1 Fri Mar 11 23:14:14 CET 2016
[ 0.000000] MyLoader: sysp=8d0734c9, boardp=6e1d1b6c, parts=d7a9fd94
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 803601f0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: board=TL-WR841N-v9 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 28456K/32768K available (2503K kernel code, 128K rwdata, 532K rodata, 220K init, 188K bss, 4312K reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:650.000MHz, DDR:392.773MHz, AHB:216.666MHz, Ref:25.000MHz
[ 0.000000] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
[ 0.060000] pid_max: default: 32768 minimum: 301
[ 0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.080000] NET: Registered protocol family 16
[ 0.080000] MIPS: machine is TP-LINK TL-WR841N/ND v9
[ 0.540000] Switched to clocksource MIPS
[ 0.540000] NET: Registered protocol family 2
[ 0.550000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.550000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.560000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.560000] TCP: reno registered
[ 0.570000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.570000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.580000] NET: Registered protocol family 1
[ 0.580000] PCI: CLS 0 bytes, default 32
[ 0.580000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.600000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.600000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.610000] msgmni has been set to 55
[ 0.630000] io scheduler noop registered
[ 0.630000] io scheduler deadline registered (default)
[ 0.630000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.640000] console [ttyS0] disabled
[ 0.660000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[ 0.670000] console [ttyS0] enabled
[ 0.680000] bootconsole [early0] disabled
[ 0.690000] m25p80 spi0.0: found gd25q32, expected m25p80
[ 0.700000] m25p80 spi0.0: gd25q32 (4096 Kbytes)
[ 0.700000] 5 tp-link partitions found on MTD device spi0.0
[ 0.710000] Creating 5 MTD partitions on "spi0.0":
[ 0.710000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.720000] 0x000000020000-0x000000137ca4 : "kernel"
[ 0.730000] 0x000000137ca4-0x0000003f0000 : "rootfs"
[ 0.730000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.740000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.740000] 0x000000380000-0x0000003f0000 : "rootfs_data"
[ 0.750000] 0x0000003f0000-0x000000400000 : "art"
[ 0.760000] 0x000000020000-0x0000003f0000 : "firmware"
[ 0.780000] libphy: ag71xx_mdio: probed
[ 1.380000] ag71xx-mdio.1: Found an AR934X built-in switch
[ 1.420000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.020000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
[ 2.030000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.040000] TCP: cubic registered
[ 2.040000] NET: Registered protocol family 17
[ 2.040000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.060000] Bridge firewalling registered
[ 2.060000] 8021q: 802.1Q VLAN Support v1.8
[ 2.070000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.080000] Freeing unused kernel memory: 220K (80379000 - 803b0000)
[ 3.030000] init: Console is alive
[ 3.040000] init: - watchdog -
[ 4.360000] usbcore: registered new interface driver usbfs
[ 4.370000] usbcore: registered new interface driver hub
[ 4.370000] usbcore: registered new device driver usb
[ 4.390000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.400000] ehci-platform: EHCI generic platform driver
[ 4.400000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.410000] ohci-platform: OHCI generic platform driver
[ 5.090000] init: - preinit -
[ 5.470000] random: procd urandom read with 8 bits of entropy available
[ 7.550000] eth0: link up (1000Mbps/Full duplex)
[ 8.720000] jffs2: notice: (347) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 8.730000] mount_root: switching to jffs2 overlay
[ 8.770000] eth0: link down
[ 8.780000] procd: - early -
[ 8.780000] procd: - watchdog -
[ 9.380000] procd: - ubus -
[ 10.400000] procd: - init -
[ 11.420000] NET: Registered protocol family 10
[ 11.430000] tun: Universal TUN/TAP device driver, 1.6
[ 11.440000] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 11.450000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 11.480000] batman_adv: B.A.T.M.A.N. advanced 2013.4.0 (compatibility version 14) loaded
[ 11.510000] u32 classifier
[ 11.510000] input device check on
[ 11.510000] Actions configured
[ 11.520000] Mirror/redirect action on
[ 11.530000] nf_conntrack version 0.5.0 (448 buckets, 1792 max)
[ 11.600000] arp_tables: (C) 2002 David S. Miller
[ 11.610000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[ 11.620000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[ 11.670000] Ebtables v2.0 registered
[ 11.670000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.880000] xt_time: kernel timezone is -0000
[ 12.090000] ath: EEPROM regdomain: 0x0
[ 12.090000] ath: EEPROM indicates default country code should be used
[ 12.090000] ath: doing EEPROM country->regdmn map search
[ 12.090000] ath: country maps to regdmn code: 0x3a
[ 12.090000] ath: Country alpha2 being used: US
[ 12.090000] ath: Regpair used: 0x3a
[ 12.110000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.110000] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=47
[ 14.510000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.260000] eth0: link up (1000Mbps/Full duplex)
[ 16.260000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.940000] eth0: link down
[ 19.010000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.020000] device eth0.1 entered promiscuous mode
[ 19.030000] device eth0 entered promiscuous mode
[ 19.040000] IPv6: ADDRCONF(NETDEV_UP): br-mesh: link is not ready
[ 19.090000] IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready
[ 19.110000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.760000] eth0: link up (1000Mbps/Full duplex)
[ 21.760000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.790000] br-mesh: port 1(eth0.1) entered forwarding state
[ 21.790000] br-mesh: port 1(eth0.1) entered forwarding state
[ 21.800000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.3: link becomes ready
[ 21.810000] IPv6: ADDRCONF(NETDEV_CHANGE): br-mesh: link becomes ready
[ 22.240000] eth1: link up (10Mbps/Half duplex)
[ 22.240000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 23.410000] br-mesh: port 1(eth0.1) entered disabled state
[ 23.410000] device eth0.1 left promiscuous mode
[ 23.420000] br-mesh: port 1(eth0.1) entered disabled state
[ 23.430000] eth1: link down
[ 23.470000] eth0: link down
[ 23.510000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[ 23.560000] device eth0 left promiscuous mode
[ 23.560000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[ 23.570000] device eth0 entered promiscuous mode
[ 23.570000] IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready
[ 23.580000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.600000] device eth0.1 entered promiscuous mode
[ 23.610000] br-mesh: port 1(eth0.1) entered forwarding state
[ 23.620000] br-mesh: port 1(eth0.1) entered forwarding state
[ 23.730000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 24.410000] br-mesh: port 1(eth0.1) entered disabled state
[ 25.180000] eth0: link up (1000Mbps/Full duplex)
[ 25.180000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.200000] br-mesh: port 1(eth0.1) entered forwarding state
[ 25.200000] br-mesh: port 1(eth0.1) entered forwarding state
[ 25.210000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.3: link becomes ready
[ 25.310000] batman_adv: bat0: Adding interface: eth0.3
[ 25.320000] batman_adv: bat0: The MTU of interface eth0.3 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1528 would solve the problem.
[ 25.340000] batman_adv: bat0: Interface activated: eth0.3
[ 25.350000] device bat0 entered promiscuous mode
[ 25.360000] br-mesh: port 2(bat0) entered forwarding state
[ 25.360000] br-mesh: port 2(bat0) entered forwarding state
[ 25.610000] batman_adv: bat0: Changing gw mode from: off to: client
[ 25.630000] batman_adv: bat0: gw_sel_class: Changing from: 20 to: 1
[ 25.630000] batman_adv: bat0: network_coding: Changing from: enabled to: disabled
[ 25.730000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
[ 25.740000] device w2ap entered promiscuous mode
[ 25.770000] br-mesh: port 3(w2ap) entered forwarding state
[ 25.780000] br-mesh: port 3(w2ap) entered forwarding state
[ 25.780000] IPv6: ADDRCONF(NETDEV_CHANGE): w2ap: link becomes ready
[ 25.920000] IPv6: ADDRCONF(NETDEV_UP): w2mesh: link is not ready
[ 25.950000] w2mesh: Created IBSS using preconfigured BSSID 02:ca:ff:ee:ba:be
[ 25.960000] w2mesh: Creating new IBSS network, BSSID 02:ca:ff:ee:ba:be
[ 25.970000] IPv6: ADDRCONF(NETDEV_CHANGE): w2mesh: link becomes ready
[ 26.240000] eth1: link up (10Mbps/Half duplex)
[ 26.240000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 26.330000] batman_adv: bat0: Adding interface: w2mesh
[ 26.340000] batman_adv: bat0: Interface activated: w2mesh
[ 27.200000] br-mesh: port 1(eth0.1) entered forwarding state
[ 27.360000] br-mesh: port 2(bat0) entered forwarding state
[ 27.780000] br-mesh: port 3(w2ap) entered forwarding state
[ 32.960000] batman_adv: (null): no_rebroadcast: Changing from: disabled to: enabled
[ 33.100000] batman_adv: bat0: Adding interface: fffVPN
[ 33.100000] batman_adv: bat0: The MTU of interface fffVPN is too small (1426) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1528 would solve the problem.
[ 33.130000] batman_adv: bat0: Interface activated: fffVPN
[ 52.240000] random: nonblocking pool is initialized
[ 58.250000] batman_adv: bat0: Changing gw mode from: client to: off
[ 59.290000] batman_adv: bat0: Changing gw mode from: off to: client
[ 118.150000] batman_adv: bat0: Changing gw mode from: client to: off
[ 119.170000] batman_adv: bat0: Changing gw mode from: off to: client
[ 178.150000] batman_adv: bat0: Changing gw mode from: client to: off
[ 179.170000] batman_adv: bat0: Changing gw mode from: off to: client
[ 238.150000] batman_adv: bat0: Changing gw mode from: client to: off
[ 239.170000] batman_adv: bat0: Changing gw mode from: off to: client
[ 298.150000] batman_adv: bat0: Changing gw mode from: client to: off
[ 299.170000] batman_adv: bat0: Changing gw mode from: off to: client
[ 358.190000] batman_adv: bat0: Changing gw mode from: client to: off
[ 359.280000] batman_adv: bat0: Changing gw mode from: off to: client
[ 418.160000] batman_adv: bat0: Changing gw mode from: client to: off
[ 419.170000] batman_adv: bat0: Changing gw mode from: off to: client
[ 478.160000] batman_adv: bat0: Changing gw mode from: client to: off
[ 479.170000] batman_adv: bat0: Changing gw mode from: off to: client
[ 538.160000] batman_adv: bat0: Changing gw mode from: client to: off
[ 539.170000] batman_adv: bat0: Changing gw mode from: off to: client
[ 598.160000] batman_adv: bat0: Changing gw mode from: client to: off
[ 599.170000] batman_adv: bat0: Changing gw mode from: off to: client
[ 658.190000] batman_adv: bat0: Changing gw mode from: client to: off
[ 659.230000] batman_adv: bat0: Changing gw mode from: off to: client
[ 718.160000] batman_adv: bat0: Changing gw mode from: client to: off
[ 719.180000] batman_adv: bat0: Changing gw mode from: off to: client
[ 778.160000] batman_adv: bat0: Changing gw mode from: client to: off
[ 779.180000] batman_adv: bat0: Changing gw mode from: off to: client
[ 838.160000] batman_adv: bat0: Changing gw mode from: client to: off
[ 839.180000] batman_adv: bat0: Changing gw mode from: off to: client
[ 898.160000] batman_adv: bat0: Changing gw mode from: client to: off
[ 899.180000] batman_adv: bat0: Changing gw mode from: off to: client
[ 958.170000] batman_adv: bat0: Changing gw mode from: client to: off
[ 959.210000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1018.160000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1019.180000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1078.160000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1079.190000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1138.170000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1139.180000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1198.170000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1199.180000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1258.200000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1259.240000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1318.170000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1319.190000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1378.170000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1379.190000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1438.170000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1439.190000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1498.170000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1499.190000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1558.200000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1559.250000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1618.170000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1619.190000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1678.170000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1679.190000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1738.170000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1739.190000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1798.170000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1799.190000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1858.190000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1859.230000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1918.180000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1919.190000] batman_adv: bat0: Changing gw mode from: off to: client
[ 1978.180000] batman_adv: bat0: Changing gw mode from: client to: off
[ 1979.190000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2038.180000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2039.190000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2098.180000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2099.200000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2158.210000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2159.280000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2218.180000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2219.200000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2278.180000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2279.200000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2338.180000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2339.200000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2398.180000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2399.200000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2458.190000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2459.230000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2518.220000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2519.250000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2578.230000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2579.250000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2638.230000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2639.250000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2698.230000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2699.250000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2758.260000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2759.300000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2818.230000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2819.250000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2878.230000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2879.250000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2938.230000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2939.250000] batman_adv: bat0: Changing gw mode from: off to: client
[ 2998.230000] batman_adv: bat0: Changing gw mode from: client to: off
[ 2999.270000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3058.260000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3059.310000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3118.230000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3119.260000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3178.230000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3179.250000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3238.230000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3239.250000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3298.250000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3299.270000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3358.280000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3359.320000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3418.250000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3419.270000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3478.250000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3479.270000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3538.250000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3539.270000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3598.250000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3599.270000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3658.300000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3659.340000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3718.260000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3719.270000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3778.260000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3779.270000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3838.260000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3839.270000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3898.260000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3899.270000] batman_adv: bat0: Changing gw mode from: off to: client
[ 3958.400000] batman_adv: bat0: Changing gw mode from: client to: off
[ 3959.430000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4018.260000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4019.280000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4078.260000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4079.280000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4138.260000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4139.280000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4198.260000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4199.280000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4258.320000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4259.330000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4318.260000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4319.280000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4378.260000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4379.280000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4437.270000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4438.280000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4497.270000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4498.280000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4557.280000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4558.320000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4617.270000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4618.290000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4677.270000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4678.290000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4737.270000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4738.290000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4797.270000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4798.290000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4857.310000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4858.350000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4917.270000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4918.290000] batman_adv: bat0: Changing gw mode from: off to: client
[ 4977.270000] batman_adv: bat0: Changing gw mode from: client to: off
[ 4978.290000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5037.270000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5038.290000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5097.270000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5098.290000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5157.360000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5158.390000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5217.280000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5218.290000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5277.280000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5278.290000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5337.280000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5338.290000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5397.280000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5398.300000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5457.290000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5458.330000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5517.280000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5518.300000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5577.280000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5578.300000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5637.280000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5638.300000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5697.280000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5698.300000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5757.340000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5758.400000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5817.280000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5818.300000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5877.280000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5878.300000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5937.290000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5938.300000] batman_adv: bat0: Changing gw mode from: off to: client
[ 5997.290000] batman_adv: bat0: Changing gw mode from: client to: off
[ 5998.300000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6057.350000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6058.400000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6117.290000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6118.310000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6177.290000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6178.310000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6237.290000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6238.310000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6297.290000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6298.310000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6357.300000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6358.340000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6417.290000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6418.310000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6477.290000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6478.310000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6537.290000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6538.310000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6597.290000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6598.310000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6657.360000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6658.420000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6717.300000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6718.310000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6777.300000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6778.310000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6806.480000] eth1: link down
[ 6810.480000] eth1: link up (10Mbps/Half duplex)
[ 6810.980000] eth0: link down
[ 6811.480000] br-mesh: port 1(eth0.1) entered disabled state
[ 6811.520000] batman_adv: bat0: Interface deactivated: eth0.3
[ 6811.530000] batman_adv: bat0: Removing interface: eth0.3
[ 6812.480000] eth0: link up (1000Mbps/Full duplex)
[ 6812.480000] br-mesh: port 1(eth0.1) entered forwarding state
[ 6812.490000] br-mesh: port 1(eth0.1) entered forwarding state
[ 6812.540000] batman_adv: bat0: Adding interface: eth0.3
[ 6812.550000] batman_adv: bat0: The MTU of interface eth0.3 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1528 would solve the problem.
[ 6812.580000] batman_adv: bat0: Interface activated: eth0.3
[ 6814.490000] br-mesh: port 1(eth0.1) entered forwarding state
[ 6814.820000] br-mesh: received packet on bat0 with own address as source address
[ 6837.300000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6838.310000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6897.300000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6898.310000] batman_adv: bat0: Changing gw mode from: off to: client
[ 6955.360000] br-mesh: received packet on bat0 with own address as source address
[ 6957.310000] batman_adv: bat0: Changing gw mode from: client to: off
[ 6958.380000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7017.300000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7018.320000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7077.300000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7078.320000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7080.800000] br-mesh: received packet on bat0 with own address as source address
[ 7137.300000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7138.320000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7197.300000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7198.320000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7206.240000] br-mesh: received packet on bat0 with own address as source address
[ 7257.330000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7258.390000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7317.300000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7318.320000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7331.680000] br-mesh: received packet on bat0 with own address as source address
[ 7377.310000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7378.320000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7437.310000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7438.320000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7457.120000] br-mesh: received packet on bat0 with own address as source address
[ 7497.310000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7498.320000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7557.340000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7558.410000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7582.560000] br-mesh: received packet on bat0 with own address as source address
[ 7617.310000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7618.330000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7677.310000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7678.330000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7708.000000] br-mesh: received packet on bat0 with own address as source address
[ 7737.310000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7738.330000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7797.310000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7798.330000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7833.440000] br-mesh: received packet on bat0 with own address as source address
[ 7857.340000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7858.420000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7917.310000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7918.330000] batman_adv: bat0: Changing gw mode from: off to: client
[ 7958.880000] br-mesh: received packet on bat0 with own address as source address
[ 7977.310000] batman_adv: bat0: Changing gw mode from: client to: off
[ 7978.330000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8037.310000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8038.330000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8084.320000] br-mesh: received packet on bat0 with own address as source address
[ 8097.330000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8098.350000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8157.360000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8158.430000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8209.760000] br-mesh: received packet on bat0 with own address as source address
[ 8217.330000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8218.350000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8277.330000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8278.350000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8335.200000] br-mesh: received packet on bat0 with own address as source address
[ 8337.330000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8338.350000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8381.790000] br-mesh: received packet on bat0 with own address as source address
[ 8397.330000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8398.350000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8457.370000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8458.410000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8517.340000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8518.350000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8577.340000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8578.350000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8586.080000] br-mesh: received packet on bat0 with own address as source address
[ 8637.340000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8638.350000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8697.340000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8698.360000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8711.520000] br-mesh: received packet on bat0 with own address as source address
[ 8757.370000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8758.440000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8817.340000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8818.360000] batman_adv: bat0: Changing gw mode from: off to: client
[ 8836.960000] br-mesh: received packet on bat0 with own address as source address
[ 8877.340000] batman_adv: bat0: Changing gw mode from: client to: off
[ 8878.360000] batman_adv: bat0: Changing gw mode from: off to: client
root at OpenWrt (KSB):~#
root at OpenWrt (KSB):~# ifconfig
bat0 Link encap:Ethernet HWaddr 0E:67:0B:FC:B8:48
inet6 addr: fe80::c67:bff:fefc:b848/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:72 errors:0 dropped:0 overruns:0 frame:0
TX packets:155 errors:0 dropped:48 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3024 (2.9 KiB) TX bytes:11226 (10.9 KiB)
br-mesh Link encap:Ethernet HWaddr F4:F2:6D:40:4A:B6
inet6 addr: fdff::f4f2:6d40:4ab6/64 Scope:Global
inet6 addr: fdff::f6f2:6dff:fe40:4ab6/64 Scope:Global
inet6 addr: fe80::f6f2:6dff:fe40:4ab6/64 Scope:Link
inet6 addr: fdff::1/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1312 errors:0 dropped:0 overruns:0 frame:0
TX packets:1516 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:141983 (138.6 KiB) TX bytes:267854 (261.5 KiB)
eth0 Link encap:Ethernet HWaddr F4:F2:6D:40:4A:B6
inet6 addr: fe80::f6f2:6dff:fe40:4ab6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2950 errors:0 dropped:0 overruns:0 frame:0
TX packets:12641 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:533045 (520.5 KiB) TX bytes:761807 (743.9 KiB)
Interrupt:5
eth0.1 Link encap:Ethernet HWaddr F4:F2:6D:40:4A:B6
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1255 errors:0 dropped:0 overruns:0 frame:0
TX packets:1398 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:132987 (129.8 KiB) TX bytes:250788 (244.9 KiB)
eth0.3 Link encap:Ethernet HWaddr F4:F2:6D:40:4A:B7
inet6 addr: fe80::f6f2:6dff:fe40:4ab7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1694 errors:0 dropped:0 overruns:0 frame:0
TX packets:11224 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:346874 (338.7 KiB) TX bytes:458957 (448.2 KiB)
eth1 Link encap:Ethernet HWaddr F4:F2:6D:40:4A:B7
inet addr:192.168.178.138 Bcast:192.168.178.255 Mask:255.255.255.0
inet6 addr: fe80::f6f2:6dff:fe40:4ab7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16168 errors:0 dropped:0 overruns:0 frame:0
TX packets:1086 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2706069 (2.5 MiB) TX bytes:144678 (141.2 KiB)
Interrupt:4
fffVPN Link encap:Ethernet HWaddr 2E:C2:27:F9:24:1E
inet6 addr: fe80::2cc2:27ff:fef9:241e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1426 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:17957 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 B) TX bytes:727466 (710.4 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:46 errors:0 dropped:0 overruns:0 frame:0
TX packets:46 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6624 (6.4 KiB) TX bytes:6624 (6.4 KiB)
w2ap Link encap:Ethernet HWaddr F6:F2:6D:40:4A:B6
inet6 addr: fe80::f4f2:6dff:fe40:4ab6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:46 errors:0 dropped:0 overruns:0 frame:0
TX packets:257 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16266 (15.8 KiB) TX bytes:20250 (19.7 KiB)
w2mesh Link encap:Ethernet HWaddr F4:F2:6D:40:4A:B6
inet6 addr: fe80::f6f2:6dff:fe40:4ab6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1532 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:16118 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:961879 (939.3 KiB)
root at OpenWrt (KSB):~#
Mehr Informationen über die Mailingliste franken