[Freifunk Franken] Freifunk Firmware für Franken in der Version 0.4.2 veröffentlicht

[kwadronaut]

Wieso gibst eigentlich neue sshd-keys bei jedem firmwareupgrade?


On 07/01/14 21:39, Ralph A. Schmid, dk5ras wrote:
> Ich hoffe, der kommt wieder hoch, da ich nicht vor Ort bin...
> 
> Was will mir das sagen?
> 
> Welcome to the free wireless experience
>  For more information take a look at http://freifunk-ol.de
>  ---------------------------------------------------------
> root at KabuliyanPC:~# cd ..
> root at KabuliyanPC:/# cd tmp/
> root at KabuliyanPC:/tmp# sysupgrad openwrt-ar71xx-generic-tl-wr741nd-v4-squashfs-s
> ysupgrade.bin
> -ash: sysupgrad: not found
> root at KabuliyanPC:/tmp# sysupgrade openwrt-ar71xx-generic-tl-wr741nd-v4-squashfs-
> sysupgrade.bin
> /sbin/sysupgrade: eval: line 1: opkg: not found
> Saving config files...
> Sending TERM to remaining processes ... crond ntpd httpd syslogd klogd hotplug2 ubusd netifd
> Sending KILL to remaining processes ...
> Switching to ramdisk...
> Performing system upgrade...
> Unlocking firmware ...
> 
> Writing from <stdin> to firmware ...
> Appending jffs2 data from /tmp/sysupgrade.tgz to firmware...TRX header not found
> Error fixing up TRX header
> 
>> -----Original Message-----
>> From: franken [mailto:franken-bounces at freifunk.net] On Behalf Of Tim Niemeyer
>> Sent: Tuesday, 7 January, 2014 20:44
>> To: franken at freifunk.net
>> Subject: [Freifunk Franken] Freifunk Firmware für Franken in der Version 0.4.2 veröffentlicht
>>
>> Hi
>>
>> Heute wurde die Version 0.4.2 unserer Firmware released.
>>
>> Im wesentlichen ist dieses Release ein Bugfix-Release, vor allem der WlanWatchDog wird dadurch wieder korrekt laufen. Darüber hinaus
>> hat sich unter der Haube am Build-System einiges getan. Weiter gibt es neuerdings einige Shell-Skripte, welche in Zukunft die Router
>> Verwaltung erleichtern sollen.
>>
>> Wichtige Neuerungen:
>> * Fix mac adress conflict on wlan0-1 und eth0.3 on wr1043nd.
>> * "wlanwatchdog.sh" re-fix missing ';' and fix indentation
>>
>> Die Firmware findet ihr wie immer hier:
>> https://dev.freifunk-franken.de/firmware/0.4.2/
>>
>> Bugs wie immer gern hier:
>> https://ticket.freifunk-ol.de/projects/fw/issues
>>
>> *Update Script
>> Mit Ausnahme der Router hastver741 und MoriasTownhall kann dieses Skript einfach in die bestehende SSH Verindung gepastet werden. Es
>> updatet den Router. Das Passwort bleibt beim Update bestehen und muss nicht neu gesetzt werden.
>> --- %< ---
>> BOARD=$(cat /var/sysinfo/board_name)
>> case "$BOARD" in
>> tl-wr1043nd)
>> BOARD=tl-wr1043nd-v1
>> ;;
>> tl-wr741nd)
>> grep "Atheros AR7240 rev 2" /proc/cpuinfo && BOARD=tl-wr741nd-v2 ;; esac FILE="openwrt-ar71xx-generic-$BOARD-squashfs-
>> sysupgrade.bin"
>> echo "Loading $FILE"
>> cd /tmp/
>> wget http://$(uci get configurator. at api[0].ipv6_address)%$(uci get configurator. at api[0].ipv6_interface)/dev/firmware/0.4.2/${FILE}
>> wget http://$(uci get configurator. at api[0].ipv6_address)%$(uci get configurator. at api[0].ipv6_interface)/dev/firmware/0.4.2/${FILE}.md5
>> md5sum -c ${FILE}.md5 && sysupgrade ${FILE}
>> --- >% ---
>>
>> Die Änderungen seit 0.4.1:
>>
>> Clemens John (3):
>>       Fix mac adress conflict on wlan0-1 und eth0.3 on wr1043nd. This also fixes the bad link quality
>>       Add fastd version to nodewatcher
>>       Remove tincstart.sh because we do not use tinc anymore
>>
>> Marc René Schädler (16):
>>       Enable netcat server "-l" and script execution "-e" functionality
>>       Add "serve.sh", a script to serve another script's output via netcat
>>       Add "cache.sh", a script that caches a programs output
>>       Add "statistics.sh", a script that calculates temporal derivatives
>>       Run statistics (for now only traffic) calculation with "statistics.sh" via crontab every 5 minu
>>       Add "admin.sh", a tool for easy administration tasks
>>       Add functions to set info needed for libremap and some more to "admin.sh"
>>       Add json report generator script "report.sh"
>>       "report.sh": Add and restructure some info
>>       Serve cached gzipped reports on port 81
>>       "wlanwatchdog.sh" re-fix missing ';' and fix indentation
>>       "buildscript" Fix handling of slashes in templates (eg. URLS)
>>       "rc.local.tpl" serve.sh should rund in background
>>       "report.sh" Do more things with awk
>>       "report.sh": Add average mesh quality, Report used instead of free memory
>>       "admin.sh" remove outdoor information
>>
>> Tim Niemeyer (7):
>>       statistics.sh: remove unused function
>>       community/franken: corrected firmware download url
>>       buildscript: use src folder for downloads
>>       .gitignore: Add a gitignore file
>>       buildscript: add support for config targets
>>       buildscript/get_source: apply batman no rebroadcast patch
>>       build_patches: remove old and unused patches
>>
>> Viel Spass am Gerät
>> Tim
> 
> _______________________________________________
> franken mailing list
> franken at freifunk.net
> http://lists.freifunk.net/mailman/listinfo/franken-freifunk.net
>