cpe201 v3 kaputt in node-20200501

Fr Jul 10 17:26:28 CEST 2020

Hallo Florian

On 10.07.20 17:04, Florian Wiessner wrote:
> Hi,
> 
> 
> es sieht so aus als ob die CPE bootet, aber aus irgend einem Grund das
> hoodfile manchmal nicht laden kann:
> 
> /usr/sbin/configurehood
> We have a Gateway in Range, we load the keyxchangev2data from fe80::1
> Trying to get hoodfile from gateway...
> Connecting to [fe80::1%br-mesh]:2342 ([fe80::1%10]:2342)
> 
> hier bekomme ich manchmal connection reset by peer - warum noch fe80::1?
> Sollte das nicht von fe80::fff:1 geholt werden?

das haben wir glaub ich nie geändert (war damals nur als Idee im
Gespräch) sondern damals anders gelöst:

https://github.com/FreifunkFranken/firmware/commit/f8269102a577b8a554343ab1c6ee319ca4934774

Somit kann von "Clientseite" kein fe80::1 mehr reinspucken und wir
können diese verwenden.

Die Gatewayanleitung sagt das gleiche

https://wiki.freifunk-franken.de/w/Freifunk-Gateway_aufsetzen/http#Funktion

und die Firmware ebenfalls:

https://github.com/FreifunkFranken/firmware/blob/master/src/packages/fff/fff-hoods/files/usr/lib/functions/fff/hoodfile#L80

Beim eigentlichen Problem kann ich dir aber leider nicht weiter helfen

Gruß

Christian

> 
> Dann wird /tmp/started nicht angelegt, folglich läuft auch nodewatcher
> nicht.
> 
> 
> 
> 
> Am 08.07.2020 um 23:00 schrieb Florian Wiessner:
>> Hi,
>>
>> habe eine CPE210 v3 auf node-20200501 upgedated, die bekommt keine fd43
>> addressen mehr nach dem boot und ausserdem loopts wohl auf dem br-mesh?
>>
>>
>> root at 0083-wiessner:~# dmesg
>> [    0.000000] Linux version 4.14.171 (fbl at homebuild) (gcc version 7.5.0
>> (OpenWrt GCC 7.5.0 r10947-65030d81f3)) #0 Thu Feb 27 21:05:12 2020
>> [    0.000000] MyLoader: sysp=8760e2d5, boardp=87358a9d, parts=1d2c1034
>> [    0.000000] bootconsole [early0] enabled
>> [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
>> [    0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
>> [    0.000000] Determined physical RAM map:
>> [    0.000000]  memory: 04000000 @ 00000000 (usable)
>> [    0.000000] Initrd not found or empty - disabling initrd
>> [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
>> [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32
>> bytes
>> [    0.000000] Zone ranges:
>> [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
>> [    0.000000] Movable zone start for each node
>> [    0.000000] Early memory node ranges
>> [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
>> [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
>> [    0.000000] On node 0 totalpages: 16384
>> [    0.000000] free_area_init_node: node 0, pgdat 804108f0, node_mem_map 81000020
>> [    0.000000]   Normal zone: 128 pages used for memmap
>> [    0.000000]   Normal zone: 0 pages reserved
>> [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
>> [    0.000000] random: get_random_bytes called from 0x804136ec with crng_init=0
>> [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
>> [    0.000000] pcpu-alloc: [0] 0
>> [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
>> [    0.000000] Kernel command line:  board=CPE210V3
>> mtdparts=spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,7680k(firmware),192k(config)ro,64k(ART)ro
>> console=ttyS0,115200 rootfstype=squashfs noinitrd
>> [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
>> [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
>> [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
>> [    0.000000] Writing ErrCtl register=00000000
>> [    0.000000] Readback ErrCtl register=00000000
>> [    0.000000] Memory: 60296K/65536K available (3268K kernel code, 168K rwdata,
>> 344K rodata, 244K init, 199K bss, 5240K reserved, 0K cma-reserved)
>> [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>> [    0.000000] NR_IRQS: 51
>> [    0.000000] Clocks: CPU:650.000MHz, DDR:391.357MHz, AHB:216.666MHz, Ref:25.000MHz
>> [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff,
>> max_idle_ns: 5880801374 ns
>> [    0.000010] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every
>> 6607641598ns
>> [    0.008268] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
>> [    0.074883] pid_max: default: 32768 minimum: 301
>> [    0.080005] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
>> [    0.086989] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
>> [    0.097272] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
>> max_idle_ns: 19112604462750000 ns
>> [    0.107719] futex hash table entries: 256 (order: -1, 3072 bytes)
>> [    0.114796] NET: Registered protocol family 16
>> [    0.121324] MIPS: machine is TP-LINK CPE210 v3
>> [    0.377664] clocksource: Switched to clocksource MIPS
>> [    0.384359] NET: Registered protocol family 2
>> [    0.389986] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
>> [    0.397358] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
>> [    0.404157] TCP: Hash tables configured (established 1024 bind 1024)
>> [    0.411073] UDP hash table entries: 256 (order: 0, 4096 bytes)
>> [    0.417254] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
>> [    0.424246] NET: Registered protocol family 1
>> [    0.428923] PCI: CLS 0 bytes, default 32
>> [    0.435276] Crashlog allocated RAM at address 0x3f00000
>> [    0.442750] workingset: timestamp_bits=30 max_order=14 bucket_order=0
>> [    0.455569] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>> [    0.461791] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
>> (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
>> [    0.485193] io scheduler noop registered
>> [    0.489410] io scheduler deadline registered (default)
>> [    0.495182] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
>> [    0.502423] console [ttyS0] disabled
>> [    0.526366] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud =
>> 1562500) is a 16550A
>> [    0.535481] console [ttyS0] enabled
>> [    0.543044] bootconsole [early0] disabled
>> [    0.557111] m25p80 spi0.0: found gd25q64, expected m25p80
>> [    0.565378] m25p80 spi0.0: gd25q64 (8192 Kbytes)
>> [    0.570264] 6 cmdlinepart partitions found on MTD device spi0.0
>> [    0.576380] Creating 6 MTD partitions on "spi0.0":
>> [    0.581370] 0x000000000000-0x000000020000 : "u-boot"
>> [    0.588872] 0x000000020000-0x000000030000 : "partition-table"
>> [    0.596709] 0x000000030000-0x000000040000 : "product-info"
>> [    0.605206] 0x000000040000-0x0000007c0000 : "firmware"
>> [    0.628790] 2 tplink-fw partitions found on MTD device firmware
>> [    0.634934] 0x000000040000-0x00000017d03b : "kernel"
>> [    0.641065] 0x00000017d03b-0x0000007c0000 : "rootfs"
>> [    0.647026] mtd: device 5 (rootfs) set to be root filesystem
>> [    0.653015] 1 squashfs-split partitions found on MTD device rootfs
>> [    0.659432] 0x0000003c0000-0x0000007c0000 : "rootfs_data"
>> [    0.669161] 0x0000007c0000-0x0000007f0000 : "config"
>> [    0.676143] 0x0000007f0000-0x000000800000 : "ART"
>> [    0.685114] libphy: Fixed MDIO Bus: probed
>> [    0.723128] libphy: ag71xx_mdio: probed
>> [    1.350747] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04
>> [uid=004dd042, driver=Generic PHY]
>> [    1.360973] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
>> [    1.368465] GACT probability on
>> [    1.371735] u32 classifier
>> [    1.374525]     input device check on
>> [    1.378360]     Actions configured
>> [    1.383054] NET: Registered protocol family 10
>> [    1.393878] Segment Routing with IPv6
>> [    1.397877] NET: Registered protocol family 17
>> [    1.403325] 8021q: 802.1Q VLAN Support v1.8
>> [    1.416099] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
>> [    1.425598] Freeing unused kernel memory: 244K
>> [    1.430240] This architecture does not have kernel memory protection.
>> [    2.557677] random: fast init done
>> [    3.213896] init: Console is alive
>> [    3.217874] init: - watchdog -
>> [    4.802335] kmodloader: loading kernel modules from /etc/modules-boot.d/*
>> [    5.054501] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
>> [    5.073025] init: - preinit -
>> [    6.645608] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [    8.741321] eth0: link up (100Mbps/Full duplex)
>> [    8.746111] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> [   10.358483] jffs2: notice: (392) jffs2_build_xattr_subsystem: complete
>> building xattr subsystem, 4 of xdatum (3 unchecked, 1 orphan) and 20 of xref (1
>> dead, 3 orphan) found.
>> [   10.376285] mount_root: switching to jffs2 overlay
>> [   10.442092] overlayfs: upper fs does not support tmpfile.
>> [   10.455661] urandom-seed: Seeding with /etc/urandom.seed
>> [   10.995866] eth0: link down
>> [   11.015379] procd: - early -
>> [   11.018637] procd: - watchdog -
>> [   11.993541] procd: - watchdog -
>> [   11.997246] procd: - ubus -
>> [   12.504995] random: ubusd: uninitialized urandom read (4 bytes read)
>> [   12.512285] random: ubusd: uninitialized urandom read (4 bytes read)
>> [   12.518981] random: ubusd: uninitialized urandom read (4 bytes read)
>> [   12.526729] procd: - init -
>> [   13.647023] urandom_read: 4 callbacks suppressed
>> [   13.647034] random: jshn: uninitialized urandom read (4 bytes read)
>> [   13.852060] random: ubusd: uninitialized urandom read (4 bytes read)
>> [   13.859106] random: ubus: uninitialized urandom read (4 bytes read)
>> [   14.606898] kmodloader: loading kernel modules from /etc/modules.d/*
>> [   14.640946] tun: Universal TUN/TAP device driver, 1.6
>> [   14.663641] ip6_tables: (C) 2000-2006 Netfilter Core Team
>> [   14.691051] Mirror/redirect action on
>> [   14.748920] Simple TC action Loaded
>> [   15.339851] urngd: v1.0.2 started.
>> [   15.392620] arp_tables: arp_tables: (C) 2002 David S. Miller
>> [   15.412992] Loading modules backported from Linux version
>> v4.19.98-0-gd183c8e2647a
>> [   15.420918] Backport generated by backports.git v4.19.98-1-0-g8204eb99
>> [   15.509915] Ebtables v2.0 registered
>> [   15.521947] ip_tables: (C) 2000-2006 Netfilter Core Team
>> [   15.577518] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
>> [   15.841080] xt_time: kernel timezone is -0000
>> [   15.901438] random: crng init done
>> [   16.107926] batman_adv: B.A.T.M.A.N. advanced openwrt-2019.2-5 (compatibility
>> version 15) loaded
>> [   16.144098] ath: EEPROM regdomain: 0x0
>> [   16.144111] ath: EEPROM indicates default country code should be used
>> [   16.144114] ath: doing EEPROM country->regdmn map search
>> [   16.144135] ath: country maps to regdmn code: 0x3a
>> [   16.144141] ath: Country alpha2 being used: US
>> [   16.144145] ath: Regpair used: 0x3a
>> [   16.159465] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>> [   16.162121] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=47
>> [   16.468262] kmodloader: done loading kernel modules from /etc/modules.d/*
>> [   30.825010] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [   30.900107] IPv6: ADDRCONF(NETDEV_UP): br-mesh: link is not ready
>> [   32.989570] eth0: link up (100Mbps/Full duplex)
>> [   33.010828] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> [   34.276919] 8021q: adding VLAN 0 to HW filter on device bat0
>> [   34.369560] br-mesh: port 1(bat0) entered blocking state
>> [   34.375075] br-mesh: port 1(bat0) entered disabled state
>> [   34.381058] device bat0 entered promiscuous mode
>> [   34.386144] br-mesh: port 1(bat0) entered blocking state
>> [   34.391719] br-mesh: port 1(bat0) entered forwarding state
>> [   34.398187] IPv6: ADDRCONF(NETDEV_CHANGE): br-mesh: link becomes ready
>> [   34.777908] batman_adv: bat0: No IGMP Querier present - multicast
>> optimizations disabled
>> [   34.786289] batman_adv: bat0: No MLD Querier present - multicast
>> optimizations disabled
>> [   35.404033] batman_adv: bat0: Adding interface: eth0
>> [   35.409306] batman_adv: bat0: The MTU of interface eth0 is too small (1500)
>> to handle the transport of batman-adv packets. Packets going over this interface
>> will be fragmented on layer2 which could impact the performance. Setting the MTU
>> to 1560 would solve the problem.
>> [   35.434012] batman_adv: bat0: Interface activated: eth0
>> [   36.357786] ath: EEPROM regdomain: 0x8114
>> [   36.357800] ath: EEPROM indicates we should expect a country code
>> [   36.357805] ath: doing EEPROM country->regdmn map search
>> [   36.357810] ath: country maps to regdmn code: 0x37
>> [   36.357817] ath: Country alpha2 being used: DE
>> [   36.357820] ath: Regpair used: 0x37
>> [   36.357828] ath: regdomain 0x8114 dynamically updated by user
>> [   40.308689] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
>> [   40.320805] br-mesh: port 2(w2ap) entered blocking state
>> [   40.326316] br-mesh: port 2(w2ap) entered disabled state
>> [   40.332350] device w2ap entered promiscuous mode
>> [   40.548323] IPv6: ADDRCONF(NETDEV_CHANGE): w2ap: link becomes ready
>> [   40.555173] br-mesh: port 2(w2ap) entered blocking state
>> [   40.560768] br-mesh: port 2(w2ap) entered forwarding state
>> [   40.716073] IPv6: ADDRCONF(NETDEV_UP): w2mesh: link is not ready
>> [   41.568081] IPv6: ADDRCONF(NETDEV_CHANGE): w2mesh: link becomes ready
>> [   42.295145] batman_adv: bat0: Adding interface: w2mesh
>> [   42.300734] batman_adv: bat0: Interface activated: w2mesh
>> [   42.609141] device w2ap left promiscuous mode
>> [   42.613915] br-mesh: port 2(w2ap) entered disabled state
>> [   42.763188] batman_adv: bat0: Interface deactivated: w2mesh
>> [   42.873456] batman_adv: bat0: Removing interface: w2mesh
>> [   43.245640] batman_adv: bat0: Interface deactivated: eth0
>> [   43.251362] batman_adv: bat0: Removing interface: eth0
>> [   43.294117] br-mesh: port 1(bat0) entered disabled state
>> [   43.320767] device bat0 left promiscuous mode
>> [   43.325448] br-mesh: port 1(bat0) entered disabled state
>> [   43.409855] eth0: link down
>> [   48.406642] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [   48.470989] IPv6: ADDRCONF(NETDEV_UP): br-mesh: link is not ready
>> [   50.059800] 8021q: adding VLAN 0 to HW filter on device bat0
>> [   50.066567] br-mesh: port 1(bat0) entered blocking state
>> [   50.072161] br-mesh: port 1(bat0) entered disabled state
>> [   50.078061] device bat0 entered promiscuous mode
>> [   50.083152] br-mesh: port 1(bat0) entered blocking state
>> [   50.088726] br-mesh: port 1(bat0) entered forwarding state
>> [   50.094582] IPv6: ADDRCONF(NETDEV_CHANGE): br-mesh: link becomes ready
>> [   50.501442] eth0: link up (100Mbps/Full duplex)
>> [   50.506204] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> [   50.557859] batman_adv: bat0: No IGMP Querier present - multicast
>> optimizations disabled
>> [   50.566237] batman_adv: bat0: No MLD Querier present - multicast
>> optimizations disabled
>> [   51.484769] batman_adv: bat0: Adding interface: eth0
>> [   51.490034] batman_adv: bat0: The MTU of interface eth0 is too small (1500)
>> to handle the transport of batman-adv packets. Packets going over this interface
>> will be fragmented on layer2 which could impact the performance. Setting the MTU
>> to 1560 would solve the problem.
>> [   51.514756] batman_adv: bat0: Interface activated: eth0
>> [   53.218249] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
>> [   53.370478] br-mesh: port 2(w2ap) entered blocking state
>> [   53.376149] br-mesh: port 2(w2ap) entered disabled state
>> [   53.382175] device w2ap entered promiscuous mode
>> [   53.543698] IPv6: ADDRCONF(NETDEV_CHANGE): w2ap: link becomes ready
>> [   53.550516] br-mesh: port 2(w2ap) entered blocking state
>> [   53.556043] br-mesh: port 2(w2ap) entered forwarding state
>> [   54.650433] IPv6: ADDRCONF(NETDEV_UP): w2mesh: link is not ready
>> [   55.406680] IPv6: ADDRCONF(NETDEV_CHANGE): w2mesh: link becomes ready
>> [   56.428763] batman_adv: bat0: Adding interface: w2mesh
>> [   56.434294] batman_adv: bat0: Interface activated: w2mesh
>> [   60.662499] br-mesh: received packet on bat0 with own address as source
>> address (addr:0e:80:63:ab:18:92, vlan:0)
>> [   70.897883] br-mesh: received packet on bat0 with own address as source
>> address (addr:0e:80:63:ab:18:92, vlan:0)
>> [   81.140779] br-mesh: received packet on bat0 with own address as source
>> address (addr:0e:80:63:ab:18:92, vlan:0)
>> [   91.377770] br-mesh: received packet on bat0 with own address as source
>> address (addr:0e:80:63:ab:18:92, vlan:0)
>> [  101.620292] br-mesh: received packet on bat0 with own address as source
>> address (addr:0e:80:63:ab:18:92, vlan:0)
>> [  111.857858] br-mesh: received packet on bat0 with own address as source
>> address (addr:0e:80:63:ab:18:92, vlan:0)
>> [  122.098190] br-mesh: received packet on bat0 with own address as source
>> address (addr:0e:80:63:ab:18:92, vlan:0)
>> root at 0083-wiessner:~# ip addr show
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
>> default qlen 1000
>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>     inet 127.0.0.1/8 scope host lo
>>        valid_lft forever preferred_lft forever
>>     inet6 ::1/128 scope host
>>        valid_lft forever preferred_lft forever
>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bat0
>> state UP group default qlen 1000
>>     link/ether 0e:80:63:ab:18:92 brd ff:ff:ff:ff:ff:ff
>>     inet6 fe80::c80:63ff:feab:1892/64 scope link
>>        valid_lft forever preferred_lft forever
>> 3: teql0: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 100
>>     link/void
>> 9: br-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
>> group default qlen 1000
>>     link/ether 0c:80:63:ab:18:92 brd ff:ff:ff:ff:ff:ff
>>     inet6 fdff::e80:63ff:feab:1892/64 scope global
>>        valid_lft forever preferred_lft forever
>>     inet6 fdff::1/64 scope global
>>        valid_lft forever preferred_lft forever
>>     inet6 fdff::c80:63ab:1892/64 scope global
>>        valid_lft forever preferred_lft forever
>>     inet6 fe80::e80:63ff:feab:1892/64 scope link
>>        valid_lft forever preferred_lft forever
>> 10: bat0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master
>> br-mesh state UNKNOWN group default qlen 1000
>>     link/ether 32:d1:bb:03:42:bc brd ff:ff:ff:ff:ff:ff
>> 11: w2mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1560 qdisc noqueue master bat0
>> state UP group default qlen 1000
>>     link/ether 0c:80:63:ab:18:92 brd ff:ff:ff:ff:ff:ff
>>     inet6 fe80::e80:63ff:feab:1892/64 scope link
>>        valid_lft forever preferred_lft forever
>> 12: w2ap: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master
>> br-mesh state UP group default qlen 1000
>>     link/ether 0e:80:63:ab:18:92 brd ff:ff:ff:ff:ff:ff
>>     inet6 fe80::c80:63ff:feab:1892/64 scope link
>>        valid_lft forever preferred_lft forever
>>
>> root at 0083-wiessner:~# /usr/sbin/configurehood
>> We have a Gateway in Range, we load the keyxchangev2data from fe80::1
>> Trying to get hoodfile from gateway...
>> Connecting to [fe80::1%br-mesh]:2342 ([fe80::1%9]:2342)
>> wget: error getting response: Connection reset by peer
>> We haven't got a file. We do nothing. We try it again in 5 minutes...
>> root at 0083-wiessner:~# ip addr show
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
>> default qlen 1000
>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>     inet 127.0.0.1/8 scope host lo
>>        valid_lft forever preferred_lft forever
>>     inet6 ::1/128 scope host
>>        valid_lft forever preferred_lft forever
>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bat0
>> state UP group default qlen 1000
>>     link/ether 0e:80:63:ab:18:92 brd ff:ff:ff:ff:ff:ff
>>     inet6 fe80::c80:63ff:feab:1892/64 scope link
>>        valid_lft forever preferred_lft forever
>> 3: teql0: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 100
>>     link/void
>> 9: br-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
>> group default qlen 1000
>>     link/ether 0c:80:63:ab:18:92 brd ff:ff:ff:ff:ff:ff
>>     inet6 fdff::e80:63ff:feab:1892/64 scope global
>>        valid_lft forever preferred_lft forever
>>     inet6 fdff::1/64 scope global
>>        valid_lft forever preferred_lft forever
>>     inet6 fdff::c80:63ab:1892/64 scope global
>>        valid_lft forever preferred_lft forever
>>     inet6 fe80::e80:63ff:feab:1892/64 scope link
>>        valid_lft forever preferred_lft forever
>> 10: bat0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master
>> br-mesh state UNKNOWN group default qlen 1000
>>     link/ether 32:d1:bb:03:42:bc brd ff:ff:ff:ff:ff:ff
>> 11: w2mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1560 qdisc noqueue master bat0
>> state UP group default qlen 1000
>>     link/ether 0c:80:63:ab:18:92 brd ff:ff:ff:ff:ff:ff
>>     inet6 fe80::e80:63ff:feab:1892/64 scope link
>>        valid_lft forever preferred_lft forever
>> 12: w2ap: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master
>> br-mesh state UP group default qlen 1000
>>     link/ether 0e:80:63:ab:18:92 brd ff:ff:ff:ff:ff:ff
>>     inet6 fe80::c80:63ff:feab:1892/64 scope link
>>        valid_lft forever preferred_lft forever
>> root at 0083-wiessner:~# /usr/sbin/configurehood
>> We have a Gateway in Range, we load the keyxchangev2data from fe80::1
>> Trying to get hoodfile from gateway...
>> Connecting to [fe80::1%br-mesh]:2342 ([fe80::1%9]:2342)
>> New file detected, we reconfigure the Node
>> Setting hood name: Naila (ID 30)
>> Reloading wifi
>> uci: Entry not found
>> waiting 30 secs for br-mesh address...
>> rm: can't remove '/tmp/fastd_fff_peers/*': No such file or directory
>> /etc/init.d/fastd: fff: interface 'fffVPN' does not exist
>> Set ULA address to br-mesh: fd43:5602:29bd:29::0c80:63ab:1892/64
>> Set ULA EUI-64 address to br-mesh: fd43:5602:29bd:29:0e80:63ff:feab:1892/64
>> Set ULA route to br-mesh.
>> root at 0083-wiessner:~# ip addr show
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
>> default qlen 1000
>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>     inet 127.0.0.1/8 scope host lo
>>        valid_lft forever preferred_lft forever
>>     inet6 ::1/128 scope host
>>        valid_lft forever preferred_lft forever
>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bat0
>> state UP group default qlen 1000
>>     link/ether 0e:80:63:ab:18:92 brd ff:ff:ff:ff:ff:ff
>>     inet6 fe80::c80:63ff:feab:1892/64 scope link
>>        valid_lft forever preferred_lft forever
>> 3: teql0: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 100
>>     link/void
>> 9: br-mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
>> group default qlen 1000
>>     link/ether 0c:80:63:ab:18:92 brd ff:ff:ff:ff:ff:ff
>>     inet6 fd43:5602:29bd:29:e80:63ff:feab:1892/64 scope global
>>        valid_lft forever preferred_lft forever
>>     inet6 fd43:5602:29bd:29:0:c80:63ab:1892/64 scope global
>>        valid_lft forever preferred_lft forever
>>     inet6 fdff::e80:63ff:feab:1892/64 scope global
>>        valid_lft forever preferred_lft forever
>>     inet6 fdff::1/64 scope global
>>        valid_lft forever preferred_lft forever
>>     inet6 fdff::c80:63ab:1892/64 scope global
>>        valid_lft forever preferred_lft forever
>>     inet6 fe80::e80:63ff:feab:1892/64 scope link
>>        valid_lft forever preferred_lft forever
>> 10: bat0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master
>> br-mesh state UNKNOWN group default qlen 1000
>>     link/ether 32:d1:bb:03:42:bc brd ff:ff:ff:ff:ff:ff
>> 11: w2mesh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1560 qdisc noqueue master bat0
>> state UP group default qlen 1000
>>     link/ether 0c:80:63:ab:18:92 brd ff:ff:ff:ff:ff:ff
>>     inet6 fe80::e80:63ff:feab:1892/64 scope link
>>        valid_lft forever preferred_lft forever
>> 12: w2ap: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master
>> br-mesh state UP group default qlen 1000
>>     link/ether 0e:80:63:ab:18:92 brd ff:ff:ff:ff:ff:ff
>>     inet6 fe80::c80:63ff:feab:1892/64 scope link
>>        valid_lft forever preferred_lft forever
>>
>> Was könnte das sein?
>>
> 
> -- 
> Mit freundlichen Grüßen
> 
> Florian Wiessner
> 
> 
> <http://www.smart-kvm.com/>
> 
> 
> smart-kvm.com
> c/o Smart Weblications GmbH
> Martinsberger Str. 1
> D-95119 Naila
> fon.: +49 9282 9638 200
> fax.: +49 9282 9638 205
> 24/7: +49 900 144 000 00 - 0,99 EUR/Min*
> http://www.smart-kvm.com
> 
> --
> Sitz der Gesellschaft: Naila
> Geschäftsführer: Florian Wiessner
> HRB-Nr.: HRB 3840 Amtsgericht Hof
> *aus dem dt. Festnetz, ggf. abweichende Preise aus dem Mobilfunknetz