[PATCH 2/2] fff-wireless: improve treatment of dysfunctional rssileds

[Fabian Bläse]

Hmm. Das ist wieder so n Ding, was dann bestimmt für neue Geräte oft vergessen wird..

Da wir die RSSI LEDs aber eh nicht sinnvoll benutzen können, da wir ja AP sind, brauchen wir das eh nicht.
Könnte man diesen Dienst nicht einfach für alle Geräte deaktivieren?

Reviewed-by: Fabian Bläse <fabian at blaese.de>

Gruß
Fabian

On 19.11.19 15:06, Adrian Schmutzler wrote:
> The rssileds set up by OpenWrt cannot be used in our firmware.
> Despite that those are bound to "wlan0" initially, we also cannot
> change them to one of our interfaces, as the interface recreation
> due to configurehood seems to break something in rssileds, causing
> high load.
> 
> This patch now disables the rssileds entirely, which has been found
> to be the only solution reliably solving the problem of high load
> under all circumstances.
> 
> While at it, add all remaining devices with rssileds enabled in
> openwrt-18.06. (When updating to openwrt-19.07, most of the ubnt
> will have to be added.)
> 
> Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> 
> ---
> 
> This is the result of testing by several people and has been used
> successfully for several months.
> ---
>  src/packages/fff/fff-wireless/Makefile                    | 2 +-
>  .../files/etc/uci-defaults/62-config-wireless             | 8 +++++---
>  2 files changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/src/packages/fff/fff-wireless/Makefile b/src/packages/fff/fff-wireless/Makefile
> index 9b7b4d3f..5ae864ab 100644
> --- a/src/packages/fff/fff-wireless/Makefile
> +++ b/src/packages/fff/fff-wireless/Makefile
> @@ -1,7 +1,7 @@
>  include $(TOPDIR)/rules.mk
>  
>  PKG_NAME:=fff-wireless
> -PKG_RELEASE:=9
> +PKG_RELEASE:=10
>  
>  PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
>  
> diff --git a/src/packages/fff/fff-wireless/files/etc/uci-defaults/62-config-wireless b/src/packages/fff/fff-wireless/files/etc/uci-defaults/62-config-wireless
> index cb057c2d..a51fe7ab 100644
> --- a/src/packages/fff/fff-wireless/files/etc/uci-defaults/62-config-wireless
> +++ b/src/packages/fff/fff-wireless/files/etc/uci-defaults/62-config-wireless
> @@ -43,9 +43,11 @@ esac
>  
>  # rssileds
>  case "$BOARD" in
> +	cpe210|\
>  	cpe210-v2|\
> -	cpe210-v3)
> -		uci -q set system.rssid_wlan0.dev=radio0
> -		uci -q commit system
> +	cpe210-v3|\
> +	cpe510|\
> +	tl-wa850re-v1)
> +		/etc/init.d/rssileds disable
>  		;;
>  esac
> 

-------------- nächster Teil --------------
Ein Dateianhang mit Binärdaten wurde abgetrennt...
Dateiname   : signature.asc
Dateityp    : application/pgp-signature
Dateigröße  : 833 bytes
Beschreibung: OpenPGP digital signature
URL         : <https://lists.freifunk.net/pipermail/franken-dev-freifunk.net/attachments/20191119/ddb1f1c8/attachment.sig>