[PATCH v3 03/14] fff-network: Reorganize network initialization
Christian Dresel
fff at chrisi01.de
Di Apr 23 13:13:37 CEST 2019
hi
On 23.04.19 13:07, Adrian Schmutzler wrote:
> Hallo zusammen,
>
> ich bräuchte noch folgende Reviews:
> Robert 3/14
> Christian 6/14
> Christian 14/14
ich hab gehofft ich kann mir die wegsparen weil Robert schon dran ist ;)
Die waren mir bisher zu groß/verwirrend um mich da jetzt reinzudenken.
>
> Folgende Änderungen habe ich jetzt berücksichtigt (ich will nicht nochmal ein Patchset schicken):
> - default-case für Ports wie in Mail enthalten.
> - sleep 5 weg
> - etc/init.d/network restart weg bei Skripten, dafür Hinweis bei echo ("Port updated successfully. Please restart network or device!")
> - 90-firstbootfff von fff-support nach fff-network verschoben
ich hab jetzt nicht mehr nachgeguckt, achtest du da aber bitte auf
Abhängigkeiten der Pakete ob sich dadurch was ändert?
>
> Der CPUPORT-Patch hat zwar auch nur ein Review, das wäre mir aber wurscht, da der im Moment ja noch keine Abhängigkeiten hat.
Den hab ich genau aus diesen Grund raus gelassen, irgendwie passt der
nicht so wirklich in das Set rein und ich kann damit wenig anfangen. Der
ist für die Gateway Seite zuständig, warum soll der eigentlich hier mit
rein?
Gruß
Christian
>
> Grüße
>
> Adrian
>
>> -----Original Message-----
>> From: franken-dev [mailto:franken-dev-bounces at freifunk.net] On Behalf Of
>> Adrian Schmutzler
>> Sent: Montag, 22. April 2019 14:35
>> To: franken-dev at freifunk.net
>> Subject: [PATCH v3 03/14] fff-network: Reorganize network initialization
>>
>> This removes the configurenetwork script and replaces it by some
>> scripts run only during first boot.
>>
>> This introduces several changes:
>> - The different tasks dealt with in configurenetwork are split.
>> Thus, one script deals with switch/port setup, one with br-mesh
>> MAC address, one with ETHMESHMAC, and one with IP addresses.
>> This makes the whole approach more modular, compared to the
>> monolithic configurenetwork.
>> - Where configurenetwork contained sophisticated, nested conditions
>> to account for all possible combinations of variables, the new
>> approach is inspired by OpenWrt's board.d subfiles. Instead of
>> defining variables, we now directly call function in a
>> select-case. This is much more flexible, as we can just put code
>> there for a special case instead of bending configurenetwork for
>> it.
>> - The select-case accounts for the various cases of similar/same
>> parameters of multiple devices, which can be grouped now.
>> - Scripts are run only at first boot. Later changes have to be
>> done manually (we will provide some scripts later). Those will
>> typically be limited to changing only the ports; no need to run
>> whole network config again.
>> - network.mode and network.config will disappear. For switch-based
>> devices, there is no advantage of using network.config compared
>> directly editing /etc/config/network. Upgrade-safety can be
>> established by putting uci commands in an upgrade-safe script
>> file (to be provided in a later patch).
>>
>> After this patch, show_info and the ports display in WebUI are
>> broken. Those will be fixed in a later patch.
>>
>> Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
>>
>> ---
>>
>> Changed in v2:
>> - Fixed archer-c60-v2 to v1
>> - Added network functions file in uci-defaults/22c
>> - Removed some -q from uci
>> - Removed all commands only needed for running devices (this is
>> uci only)
>> - Added descriptions for functions in networksetup
>>
>> Changed in v3:
>> - Changed order of 22a and 22b
>> - uci del instead uci set for WAN on one-port
>> - switch/vlanX instead of eth#/eth#.# for switch-based devices
>> ---
>> bsp/default/root_file_system/etc/rc.local | 4 -
>> src/packages/fff/fff-network/Makefile | 4 +-
>> .../files/etc/uci-defaults/22a-config-ports | 89 +++++++
>> .../files/etc/uci-defaults/22b-config-routermac | 55 +++++
>> .../files/etc/uci-defaults/22c-config-ethmesh | 75 ++++++
>> .../files/etc/uci-defaults/23-config-ipaddr | 31 +++
>> .../files/lib/functions/fff/networksetup | 163 +++++++++++++
>> .../fff-network/files/lib/functions/fff/portorder | 31 +++
>> .../fff-network/files/usr/sbin/configurenetwork | 263
>> ---------------------
>> src/packages/fff/fff-sysupgrade/Makefile | 3 +-
>> .../files/etc/uci-defaults/99-fff-sysupgrade | 1 -
>> 11 files changed, 446 insertions(+), 273 deletions(-)
>> create mode 100644
>> src/packages/fff/fff-network/files/etc/uci-defaults/22a-config-ports
>> create mode 100644
>> src/packages/fff/fff-network/files/etc/uci-defaults/22b-config-routermac
>> create mode 100644
>> src/packages/fff/fff-network/files/etc/uci-defaults/22c-config-ethmesh
>> create mode 100644
>> src/packages/fff/fff-network/files/etc/uci-defaults/23-config-ipaddr
>> create mode 100644
>> src/packages/fff/fff-network/files/lib/functions/fff/networksetup
>> create mode 100644
>> src/packages/fff/fff-network/files/lib/functions/fff/portorder
>> delete mode 100755
>> src/packages/fff/fff-network/files/usr/sbin/configurenetwork
>>
>> diff --git a/bsp/default/root_file_system/etc/rc.local
>> b/bsp/default/root_file_system/etc/rc.local
>> index 59042c37..e02368a5 100755
>> --- a/bsp/default/root_file_system/etc/rc.local
>> +++ b/bsp/default/root_file_system/etc/rc.local
>> @@ -2,10 +2,6 @@
>> # Put your custom commands here that should be executed once
>> # the system init finished. By default this file does nothing.
>>
>> -/usr/sbin/configurenetwork
>> -
>> -sleep 3
>> -
>> /usr/sbin/configurehood
>>
>> touch /tmp/started
>> diff --git a/src/packages/fff/fff-network/Makefile
>> b/src/packages/fff/fff-network/Makefile
>> index e9335884..11796797 100644
>> --- a/src/packages/fff/fff-network/Makefile
>> +++ b/src/packages/fff/fff-network/Makefile
>> @@ -1,8 +1,7 @@
>> include $(TOPDIR)/rules.mk
>>
>> PKG_NAME:=fff-network
>> -PKG_VERSION:=10
>> -PKG_RELEASE:=1
>> +PKG_RELEASE:=11
>>
>> PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
>>
>> @@ -34,7 +33,6 @@ endef
>>
>> define Package/$(PKG_NAME)/install
>> $(CP) ./files/* $(1)/
>> - test -d ./$(BOARD) && $(CP) ./$(BOARD)/* $(1)/etc/
>> endef
>>
>> $(eval $(call BuildPackage,$(PKG_NAME)))
>> diff --git
>> a/src/packages/fff/fff-network/files/etc/uci-defaults/22a-config-ports
>> b/src/packages/fff/fff-network/files/etc/uci-defaults/22a-config-ports
>> new file mode 100644
>> index 00000000..b8eaceab
>> --- /dev/null
>> +++ b/src/packages/fff/fff-network/files/etc/uci-defaults/22a-config-ports
>> @@ -0,0 +1,89 @@
>> +#!/bin/sh
>> +# Copyright 2019 Adrian Schmutzler
>> +# License GPLv3
>> +
>> +BOARD="$(uci get board.model.name)"
>> +
>> +. /lib/functions/fff/networksetup
>> +
>> +case "$BOARD" in
>> + archer-c7-v2)
>> + setupSwitch "eth1" "4 5 0t" "2 3 0t" "1 6"
>> + setupWan "eth0"
>> + ;;
>> + archer-c25-v1|\
>> + archer-c60-v1)
>> + setupSwitch "eth1" "1 2 0t" "3 4 0t"
>> + setupWan "eth0"
>> + ;;
>> + cpe210|\
>> + cpe510)
>> + # Default: LAN0: WAN, LAN1: CLIENT
>> + setupSwitch "eth0" "0t 4" "0t" "0t 5"
>> + setupWan "eth0.2"
>> + ;;
>> + gl-ar150)
>> + # Default: CLIENT
>> + setupSwitch "eth1" "0t 1" "0t"
>> + setupWan "eth0"
>> + ;;
>> + tl-wdr3500-v1|\
>> + tl-wr741nd-v2|\
>> + tl-wr841-v7|\
>> + tl-wr841-v9|\
>> + tl-wr841-v10|\
>> + tl-wr841-v11|\
>> + tl-wr841-v12)
>> + setupSwitch "eth0" "1 2 0t" "3 4 0t"
>> + setupWan "eth1"
>> + ;;
>> + tl-wdr3600-v1|\
>> + tl-wdr4300-v1|\
>> + tl-wdr4310-v1|\
>> + tl-wdr4900-v1)
>> + setupSwitch "eth0" "4 5 0t" "2 3 0t" "1 0t"
>> + setupWan "eth0.2"
>> + ;;
>> + tl-wr841-v8|\
>> + tl-wr842n-v2)
>> + setupSwitch "eth1" "1 4 0t" "2 3 0t"
>> + setupWan "eth0"
>> + ;;
>> + tl-wr740n-v4|\
>> + tl-wr740nd-v4|\
>> + tl-wr741nd-v4)
>> + setupSwitch "eth0" "1 4 0t" "2 3 0t"
>> + setupWan "eth1"
>> + ;;
>> + tl-wr1043nd-v1)
>> + setupSwitch "eth0" "3 4 5t" "1 2 5t" "0 5t"
>> + setupWan "eth0.2"
>> + ;;
>> + tl-wr1043nd-v2|\
>> + tl-wr1043nd-v3)
>> + setupSwitch "eth0" "1 2 6t" "3 4 6t" "5 6t"
>> + setupWan "eth0.2"
>> + ;;
>> + tl-wr1043nd-v4|\
>> + tl-wr1043n-v5)
>> + setupSwitch "eth0" "1 2 0t" "3 4 0t" "5 0t"
>> + setupWan "eth0.2"
>> + ;;
>> + cpe210-v2|\
>> + cpe210-v3|\
>> + tl-mr3020-v1|\
>> + tl-wa850re-v1|\
>> + tl-wa860re-v1|\
>> + tl-wa901nd-v2|\
>> + ubnt-bullet-m|\
>> + ubnt-loco-m|\
>> + ubnt-loco-m-xw|\
>> + ubnt-nano-m|\
>> + ubnt-pico-m|\
>> + ubnt-power-m-xw|\
>> + ubnt-unifi|\
>> + ubnt-unifiac-lite|\
>> + ubnt-unifiac-mesh)
>> + setupOnePort "eth0" "CLIENT"
>> + ;;
>> +esac
>> diff --git
>> a/src/packages/fff/fff-network/files/etc/uci-defaults/22b-config-routermac
>> b/src/packages/fff/fff-network/files/etc/uci-defaults/22b-config-routermac
>> new file mode 100644
>> index 00000000..d1a5e50c
>> --- /dev/null
>> +++
>> b/src/packages/fff/fff-network/files/etc/uci-defaults/22b-config-routermac
>> @@ -0,0 +1,55 @@
>> +#!/bin/sh
>> +# Copyright 2019 Adrian Schmutzler
>> +# License GPLv3
>> +
>> +BOARD="$(uci get board.model.name)"
>> +
>> +. /lib/functions/fff/networksetup
>> +
>> +. /lib/functions.sh
>> +. /lib/functions/system.sh
>> +
>> +case "$BOARD" in
>> + archer-c7-v2|\
>> + tl-wr841-v8|\
>> + tl-wr842n-v2|\
>> + tl-wr1043nd-v2|\
>> + tl-wr1043nd-v3)
>> + ROUTERMAC=$(cat /sys/class/net/eth1/address)
>> + ;;
>> + cpe210-v2|\
>> + cpe210-v3|\
>> + tl-wa850re-v1|\
>> + tl-wa860re-v1|\
>> + tl-wa901nd-v2|\
>> + tl-wdr3500-v1|\
>> + tl-wr740n-v4|\
>> + tl-wr740nd-v4|\
>> + tl-wr741nd-v2|\
>> + tl-wr741nd-v4|\
>> + tl-wr841-v7|\
>> + ubnt-bullet-m|\
>> + ubnt-loco-m|\
>> + ubnt-loco-m-xw|\
>> + ubnt-nano-m|\
>> + ubnt-pico-m|\
>> + ubnt-power-m-xw|\
>> + ubnt-unifi)
>> + ROUTERMAC=$(cat /sys/class/ieee80211/phy0/macaddress)
>> + ;;
>> + tl-wdr3600-v1|\
>> + tl-wdr4300-v1|\
>> + tl-wdr4310-v1)
>> + ROUTERMAC=$(cat /sys/class/ieee80211/phy1/macaddress)
>> + ;;
>> + ubnt-unifiac-lite|\
>> + ubnt-unifiac-mesh)
>> + ROUTERMAC=$(mtd_get_mac_binary EEPROM 0x0)
>> + ;;
>> + *)
>> + ROUTERMAC=$(cat /sys/class/net/eth0/address)
>> + ;;
>> +esac
>> +
>> +uci set "network.mesh.macaddr=$ROUTERMAC"
>> +uci commit network
>> diff --git
>> a/src/packages/fff/fff-network/files/etc/uci-defaults/22c-config-ethmesh
>> b/src/packages/fff/fff-network/files/etc/uci-defaults/22c-config-ethmesh
>> new file mode 100644
>> index 00000000..86c840c3
>> --- /dev/null
>> +++
>> b/src/packages/fff/fff-network/files/etc/uci-defaults/22c-config-ethmesh
>> @@ -0,0 +1,75 @@
>> +#!/bin/sh
>> +# Copyright 2019 Adrian Schmutzler
>> +# License GPLv3
>> +
>> +BOARD="$(uci get board.model.name)"
>> +
>> +. /lib/functions/fff/network
>> +. /lib/functions/fff/networksetup
>> +
>> +. /lib/functions.sh
>> +. /lib/functions/system.sh
>> +
>> +# macFlipLocalBit:
>> +# use mac address from phyX with 'locally administered' bit set to '1'
>> +# only possible, because wXmesh is created first and therefore gets the
>> 'universally administered address'
>> +
>> +case "$BOARD" in
>> + archer-c7-v2|\
>> + tl-wr841-v8|\
>> + tl-wr842n-v2)
>> + ETHMESHMAC=$(cat /sys/class/net/eth0/address)
>> + ;;
>> + archer-c25-v1|\
>> + archer-c60-v1|\
>> + tl-wr740n-v4|\
>> + tl-wr740nd-v4|\
>> + tl-wr741nd-v2|\
>> + tl-wr741nd-v4|\
>> + tl-wr841-v7|\
>> + tl-wr841-v9|\
>> + tl-wr841-v10|\
>> + tl-wr841-v11|\
>> + tl-wr841-v12)
>> + ETHMESHMAC=$(cat /sys/class/net/eth1/address)
>> + ;;
>> + cpe210|\
>> + cpe210-v2|\
>> + cpe210-v3|\
>> + cpe510|\
>> + tl-wa850re-v1|\
>> + tl-wa860re-v1|\
>> + tl-wa901nd-v2|\
>> + tl-wr1043nd-v1|\
>> + ubnt-bullet-m|\
>> + ubnt-loco-m|\
>> + ubnt-loco-m-xw|\
>> + ubnt-nano-m|\
>> + ubnt-pico-m|\
>> + ubnt-power-m-xw|\
>> + ubnt-unifi)
>> + ETHMESHMAC=$(macFlipLocalBit "$(cat
>> /sys/class/ieee80211/phy0/macaddress)")
>> + ;;
>> + gl-ar150|\
>> + tl-mr3020-v1)
>> + ETHMESHMAC=$(macFlipLocalBit "$(cat
>> /sys/class/net/eth0/address)")
>> + ;;
>> + tl-wdr4900-v1)
>> + ETHMESHMAC=$(macFlipLocalBit "$(cat
>> /sys/class/ieee80211/phy1/macaddress)")
>> + ;;
>> + tl-wr1043nd-v4)
>> + ETHMESHMAC=$(mtd_get_mac_binary config 0x1017c)
>> + ;;
>> + tl-wr1043n-v5)
>> + ETHMESHMAC=$(macaddr_add $(mtd_get_mac_binary
>> product-info
>> 8) 1)
>> + ;;
>> + ubnt-unifiac-lite|\
>> + ubnt-unifiac-mesh)
>> + ETHMESHMAC=$(macFlipLocalBit "$(mtd_get_mac_binary
>> EEPROM
>> 0x0)")
>> + ;;
>> +esac
>> +
>> +if [ -n "$ETHMESHMAC" ]; then
>> + uci set "network.ethmesh.macaddr=$ETHMESHMAC"
>> + uci commit network
>> +fi
>> diff --git
>> a/src/packages/fff/fff-network/files/etc/uci-defaults/23-config-ipaddr
>> b/src/packages/fff/fff-network/files/etc/uci-defaults/23-config-ipaddr
>> new file mode 100644
>> index 00000000..db500c15
>> --- /dev/null
>> +++ b/src/packages/fff/fff-network/files/etc/uci-defaults/23-config-ipaddr
>> @@ -0,0 +1,31 @@
>> +#!/bin/sh
>> +# Copyright 2019 Adrian Schmutzler
>> +# License GPLv3
>> +
>> +. /lib/functions/fff/network
>> +
>> +echo "Setting IPv6 addresses"
>> +# Some time needed :(
>> +sleep 5
>> +
>> +ROUTERMAC=$(uci get network.mesh.macaddr)
>> +prefix="fdff:0::/64"
>> +
>> +# Set $prefix as prefix
>> +uci set network.globals=globals
>> +uci set "network.globals.ula_prefix=$prefix"
>> +
>> +# Set $prefix::MAC as IP
>> +addr="$(ipMacAssemble "$prefix" "$ROUTERMAC")"
>> +uci add_list "network.mesh.ip6addr=$addr"
>> +uci set network.mesh.proto=static
>> +
>> +# Set $prefix::1 as IP
>> +addr="$(ipAssemble "$prefix" "1")"
>> +uci add_list "network.mesh.ip6addr=$addr"
>> +
>> +# Set $prefix::link-local as IP
>> +addr="$(ipEUIAssemble "$prefix" "$ROUTERMAC")"
>> +uci add_list "network.mesh.ip6addr=$addr"
>> +
>> +uci commit network
>> diff --git
>> a/src/packages/fff/fff-network/files/lib/functions/fff/networksetup
>> b/src/packages/fff/fff-network/files/lib/functions/fff/networksetup
>> new file mode 100644
>> index 00000000..ccc943df
>> --- /dev/null
>> +++ b/src/packages/fff/fff-network/files/lib/functions/fff/networksetup
>> @@ -0,0 +1,163 @@
>> +# Copyright 2019 Adrian Schmutzler
>> +# License GPLv3
>> +
>> +. /lib/functions/network.sh
>> +
>> +setAutoConf() {
>> + # Sets ipv6 auto configuration on an interface to on/off
>> + # Usage: setAutoConf <interface> <[0|1]>
>> + local iface=$1
>> + local on=$2
>> +
>> + sysctlfile="/etc/sysctl.d/51-fff-network-$iface.conf"
>> + echo "# Generated from configurenetwork" > "$sysctlfile"
>> + echo "net.ipv6.conf.$iface.accept_ra = $on" >> "$sysctlfile"
>> + echo "net.ipv6.conf.$iface.accept_ra_defrtr = $on" >>
>> "$sysctlfile"
>> + echo "net.ipv6.conf.$iface.accept_ra_pinfo = $on" >> "$sysctlfile"
>> + echo "net.ipv6.conf.$iface.autoconf = $on" >> "$sysctlfile"
>> + echo "net.ipv6.conf.$iface.accept_ra_rtr_pref = $on" >>
>> "$sysctlfile"
>> + echo "net.ipv6.conf.$iface.forwarding = 0" >> "$sysctlfile"
>> +
>> + /sbin/sysctl -p "$sysctlfile"
>> +}
>> +
>> +enableAutoConf() {
>> + # Enables ipv6 auto configuration on an interface
>> + # Usage: enableAutoConf <interface>
>> + local iface=$1
>> +
>> + setAutoConf "$iface" "1"
>> +}
>> +
>> +disableAutoConf() {
>> + # Disables ipv6 auto configuration on an interface
>> + # Usage: disableAutoConf <interface>
>> + local iface=$1
>> +
>> + setAutoConf "$iface" "0"
>> +}
>> +
>> +fixMac() {
>> + # Update MAC address on live device/interface
>> + #
>> + # fixMac <newmac> <interface>
>> + #
>> + # newmac: MAC address to be set
>> + # interface: Interface to be updated as in uci (e.g. mesh)
>> +
>> + local newmac=$1
>> + local iface=$2
>> + local dev
>> +
>> + echo "Fixing MAC on $iface"
>> + sleep 10
>> +
>> + network_get_physdev dev "$iface"
>> +
>> + uci set "network.${iface}.macaddr=$newmac"
>> + uci commit network
>> +
>> + if [ -n "$dev" ]; then
>> + ip link set "$dev" down
>> + ip link set "$dev" address "$newmac"
>> + ip link set "$dev" up
>> + fi
>> +
>> + /etc/init.d/network restart
>> +}
>> +
>> +setupSwitch() {
>> + # Set up switch for switch-based devices
>> + # This is intended for initial setup, not for updates
>> + # (changing ports will be sufficient then)
>> + #
>> + # Usage: setupSwitch <SWITCHDEV, e.g. eth0> <CLIENT_PORTS>
>> <BATMAN_PORTS> [<WAN_PORTS>]
>> +
>> + local SWITCHDEV=$1
>> + local CLIENT_PORTS=$2
>> + local BATMAN_PORTS=$3
>> + local WAN_PORTS=$4
>> + local SWITCHHW
>> +
>> + SWITCHHW="$(swconfig list | awk '{ print $4 }')"
>> +
>> + uci set "network.switch=switch"
>> + uci set "network.switch.name=$SWITCHHW"
>> + uci set "network.switch.enable=1"
>> + uci set "network.switch.reset=1"
>> + uci set "network.switch.enable_vlan=1"
>> +
>> + uci set "network.vlan1=switch_vlan"
>> + uci set "network.vlan1.device=$SWITCHHW"
>> + uci set "network.vlan1.vlan=1"
>> + uci set "network.vlan1.ports=$CLIENT_PORTS"
>> +
>> + # This defines the VLAN for WAN ports inside the switch.
>> + # This is required even if the WAN eth is separate, but the WAN
>> port is in the switch!
>> + if [ -n "$WAN_PORTS" ]; then
>> + uci set "network.vlan2=switch_vlan"
>> + uci set "network.vlan2.device=$SWITCHHW"
>> + uci set "network.vlan2.vlan=2"
>> + uci set "network.vlan2.ports=$WAN_PORTS"
>> + fi
>> +
>> + uci set "network.vlan3=switch_vlan"
>> + uci set "network.vlan3.device=$SWITCHHW"
>> + uci set "network.vlan3.vlan=3"
>> + uci set "network.vlan3.ports=$BATMAN_PORTS"
>> +
>> + uci set network.mesh.ifname="$SWITCHDEV.1 bat0"
>> + uci set network.ethmesh.ifname="$SWITCHDEV.3"
>> +
>> + uci commit network
>> +}
>> +
>> +setupWan() {
>> + # Set up WAN for any device with dedicated port (no one-port where
>> mode is changed)
>> + # This is intended for initial setup, not for updates
>> + # (updates are only possible by changing ports in a switch)
>> + #
>> + # Usage: setupWan <WANDEV, e.g. eth0, eth0.2>
>> +
>> + local WANDEV=$1
>> +
>> + # This defines the WAN interface. We use the VLAN ID only if we do
>> NOT have a separate eth.
>> + # This is different from the criterion for the WAN port dealt with
>> above!
>> + # If the WANDEV is different from the SWITCHDEV, but the WAN port
>> is in the switch,
>> + # the WAN eth has to be connected to the switch untagged!
>> + enableAutoConf "$WANDEV"
>> + uci set network.wan.ifname="$WANDEV"
>> +
>> + uci commit network
>> +}
>> +
>> +setupOnePort() {
>> + # Set up port mode for one-port devices
>> + # This is intended for initial setup and for updates
>> + # (latter will require network restart)
>> + #
>> + # Usage: setupOnePort <DEV, e.g. eth0> <ETHMODE, e.g. BATMAN,
>> CLIENT, WAN>
>> +
>> + local DEV=$1
>> + local ETHMODE=$2
>> +
>> + uci set "network.$DEV=interface"
>> + uci set "network.$DEV.ifname=$DEV"
>> + if [ "$ETHMODE" = "WAN" ]; then
>> + enableAutoConf "$DEV"
>> + uci set network.mesh.ifname="bat0"
>> + uci set network.wan.ifname="$DEV"
>> + uci del network.ethmesh.ifname
>> + elif [ "$ETHMODE" = "CLIENT" ] ; then
>> + disableAutoConf "$DEV"
>> + uci set network.mesh.ifname="bat0 $DEV"
>> + uci del network.wan.ifname
>> + uci del network.ethmesh.ifname
>> + else # default=BATMAN
>> + disableAutoConf "$DEV"
>> + uci set network.mesh.ifname="bat0"
>> + uci del network.wan.ifname
>> + uci set network.ethmesh.ifname="$DEV"
>> + fi
>> + uci commit network
>> +}
>> diff --git
>> a/src/packages/fff/fff-network/files/lib/functions/fff/portorder
>> b/src/packages/fff/fff-network/files/lib/functions/fff/portorder
>> new file mode 100644
>> index 00000000..377c302f
>> --- /dev/null
>> +++ b/src/packages/fff/fff-network/files/lib/functions/fff/portorder
>> @@ -0,0 +1,31 @@
>> +# Copyright 2019 Adrian Schmutzler
>> +# License GPLv3
>> +
>> +BOARD="$(uci get board.model.name)"
>> +
>> +case "$BOARD" in
>> + archer-c25-v1|\
>> + archer-c60-v1|\
>> + tl-wr841-v10|\
>> + tl-wr841-v11|\
>> + tl-wr841-v12)
>> + PORTORDER="4 3 2 1"
>> + ;;
>> + cpe210|\
>> + cpe510)
>> + PORTORDER="5 4"
>> + ;;
>> + gl-ar150)
>> + PORTORDER="1"
>> + ;;
>> + tl-wdr4300-v1)
>> + PORTORDER="1 2 3 4 5"
>> + ;;
>> + tl-wr841-v8)
>> + PORTORDER="2 3 4 1"
>> + ;;
>> + tl-wr1043nd-v4|\
>> + tl-wr1043n-v5)
>> + PORTORDER="5 4 3 2 1"
>> + ;;
>> +esac
>> diff --git a/src/packages/fff/fff-network/files/usr/sbin/configurenetwork
>> b/src/packages/fff/fff-network/files/usr/sbin/configurenetwork
>> deleted file mode 100755
>> index 448bd04b..00000000
>> --- a/src/packages/fff/fff-network/files/usr/sbin/configurenetwork
>> +++ /dev/null
>> @@ -1,263 +0,0 @@
>> -#!/bin/sh
>> -# This program is free software; you can redistribute it and/or modify
>> -# it under the terms of the GNU General Public License as published by
>> -# the Free Software Foundation; either version 3 of the License, or
>> -# (at your option) any later version.
>> -
>> -# This program is distributed in the hope that it will be useful,
>> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> -# GNU General Public License for more details.
>> -
>> -. /lib/functions/fff/network
>> -
>> -setupPorts() {
>> - # Add a single port to the *_PORTS config
>> - # Usage: setupPorts <port id> <port mode>
>> -
>> - local port=$1
>> - local mode=$2
>> -
>> - #default: BATMAN
>> - if [ "$mode" = "WAN" ] ; then
>> - WAN_PORTS="${WAN_PORTS} $port"
>> - elif [ "$mode" = "CLIENT" ] ; then
>> - CLIENT_PORTS="${CLIENT_PORTS} $port"
>> - else
>> - BATMAN_PORTS="${BATMAN_PORTS} $port"
>> - fi
>> -}
>> -
>> -setAutoConf() {
>> - # Sets ipv6 auto configuration on an interface to on/off
>> - # Usage: setAutoConf <interface> <[0|1]>
>> - local iface=$1
>> - local on=$2
>> -
>> - sysctlfile="/etc/sysctl.d/51-fff-network-$iface.conf"
>> - echo "# Generated from configurenetwork" > "$sysctlfile"
>> - echo "net.ipv6.conf.$iface.accept_ra = $on" >> "$sysctlfile"
>> - echo "net.ipv6.conf.$iface.accept_ra_defrtr = $on" >> "$sysctlfile"
>> - echo "net.ipv6.conf.$iface.accept_ra_pinfo = $on" >> "$sysctlfile"
>> - echo "net.ipv6.conf.$iface.autoconf = $on" >> "$sysctlfile"
>> - echo "net.ipv6.conf.$iface.accept_ra_rtr_pref = $on" >> "$sysctlfile"
>> - echo "net.ipv6.conf.$iface.forwarding = 0" >> "$sysctlfile"
>> -
>> - /sbin/sysctl -p "$sysctlfile"
>> -}
>> -
>> -enableAutoConf() {
>> - # Enables ipv6 auto configuration on an interface
>> - # Usage: enableAutoConf <interface>
>> - local iface=$1
>> -
>> - setAutoConf "$iface" "1"
>> -}
>> -
>> -disableAutoConf() {
>> - # Disables ipv6 auto configuration on an interface
>> - # Usage: disableAutoConf <interface>
>> - local iface=$1
>> -
>> - setAutoConf "$iface" "0"
>> -}
>> -
>> -BOARD="$(uci get board.model.name)"
>> -. /etc/network.$BOARD
>> -
>> -if [ -s /etc/network.config ] ; then
>> - . /etc/network.config
>> -else
>> - # Write network.config
>> - echo "CLIENT_PORTS='$CLIENT_PORTS'" > /etc/network.config
>> - echo "BATMAN_PORTS='$BATMAN_PORTS'" >> /etc/network.config
>> - if [ -n "$WAN_PORTS" ] ; then
>> - echo "WAN_PORTS='$WAN_PORTS'" >> /etc/network.config
>> - fi
>> - if [ "$ONE_PORT" = "YES" ] || [ -n "$ETHPORT" ] ; then
>> - echo "ETHMODE='$ETHMODE' # use BATMAN, CLIENT or WAN" >>
>> /etc/network.config
>> - fi
>> - if [ -n "$LAN0PORT" ] ; then
>> - echo "LAN0MODE='$LAN0MODE' # use BATMAN, CLIENT or WAN" >>
>> /etc/network.config
>> - fi
>> - if [ -n "$LAN1PORT" ] ; then
>> - echo "LAN1MODE='$LAN1MODE' # use BATMAN, CLIENT or WAN" >>
>> /etc/network.config
>> - fi
>> - echo "FORCEPARSE='0' # Parse at: 0=first boot only, 1=every reboot,
>> 2=next reboot (once)" >> /etc/network.config
>> -fi
>> -
>> -if [ "$FORCEPARSE" = '2' ] ; then
>> - sed -i '/^FORCEPARSE/d' /etc/network.config
>> - echo "FORCEPARSE='0' # Parse at: 0=first boot only, 1=every reboot,
>> 2=next reboot (once)" >> /etc/network.config
>> - FORCEPARSE='1'
>> -fi
>> -
>> -if [ -n "$ETHPORT" ] ; then
>> - #LAN at AR150: default: BATMAN
>> - setupPorts "$ETHPORT" "${ETHMODE}"
>> -fi
>> -if [ -n "$LAN0PORT" ] ; then
>> - #LAN0 at two-port: default: BATMAN
>> - setupPorts "$LAN0PORT" "${LAN0MODE}"
>> -fi
>> -if [ -n "$LAN1PORT" ] ; then
>> - #LAN1 at two-port: default: BATMAN
>> - setupPorts "$LAN1PORT" "${LAN1MODE}"
>> -fi
>> -
>> -if ! uci -q get network.$SWITCHDEV > /dev/null || [ "$FORCEPARSE" = '1' ]
>> ; then
>> -
>> - SWITCHHW=$(swconfig list | awk '{ print $4 }')
>> -
>> - uci set network.$SWITCHDEV=switch
>> - uci set network.$SWITCHDEV.name=$SWITCHHW
>> - uci set network.$SWITCHDEV.enable=1
>> - uci set network.$SWITCHDEV.reset=1
>> - uci set network.$SWITCHDEV.enable_vlan=1
>> -
>> - uci set network.${SWITCHDEV}_1=switch_vlan
>> - uci set network.${SWITCHDEV}_1.device=$SWITCHHW
>> - uci set network.${SWITCHDEV}_1.vlan=1
>> - uci set network.${SWITCHDEV}_1.ports="$CLIENT_PORTS"
>> -
>> - if [ "$WANDEV" = "$SWITCHDEV" ] || ! [ -z "$WAN_PORTS" ]; then
>> - uci set network.${SWITCHDEV}_2=switch_vlan
>> - uci set network.${SWITCHDEV}_2.device=$SWITCHHW
>> - uci set network.${SWITCHDEV}_2.vlan=2
>> - uci set network.${SWITCHDEV}_2.ports="$WAN_PORTS"
>> -
>> - enableAutoConf "$WANDEV.2"
>> - else
>> - enableAutoConf "$WANDEV"
>> - fi
>> -
>> - uci set network.${SWITCHDEV}_3=switch_vlan
>> - uci set network.${SWITCHDEV}_3.device=$SWITCHHW
>> - uci set network.${SWITCHDEV}_3.vlan=3
>> - uci set network.${SWITCHDEV}_3.ports="$BATMAN_PORTS"
>> -
>> - uci set network.mesh.ifname="$SWITCHDEV.1 bat0"
>> -
>> - uci set network.ethmesh.ifname="$SWITCHDEV.3"
>> -
>> - if [ "$WANDEV" = "$SWITCHDEV" ]; then
>> - uci set network.wan.ifname=$WANDEV.2
>> - else
>> - uci set network.wan.ifname=$WANDEV
>> - fi
>> -
>> - uci commit network
>> -fi
>> -
>> -if [ "$ONE_PORT" = "YES" ] && ( ! uci -q get network.$SWITCHDEV.ifname ||
>> [ "$FORCEPARSE" = '1' ] ) ; then
>> - uci set network.$SWITCHDEV=interface
>> - uci set network.$SWITCHDEV.ifname=$SWITCHDEV
>> - if [ "$ETHMODE" = "WAN" ]; then
>> - enableAutoConf "$WANDEV"
>> - uci set network.mesh.ifname="bat0"
>> - uci set network.wan.ifname="$WANDEV"
>> - uci del uci set network.ethmesh.ifname
>> - uci del network.eth0.macaddr
>> - elif [ "$ETHMODE" = "CLIENT" ] ; then
>> - disableAutoConf "$WANDEV"
>> - uci set network.mesh.ifname="bat0 $SWITCHDEV"
>> - uci set network.wan.ifname="eth1" #eth1 because it is default in
>> config file
>> - uci del network.ethmesh.ifname
>> - uci del network.eth0.macaddr
>> - elif [ "$ETHMODE" = "BATMAN" ] ; then
>> - disableAutoConf "$WANDEV"
>> - uci set network.mesh.ifname="bat0"
>> - uci set network.wan.ifname="eth1" #eth1 because it is default in
>> config file
>> - uci set network.ethmesh.ifname="$SWITCHDEV"
>> - ETH0MAC="w2ap"
>> - fi
>> - uci commit network
>> -fi
>> -
>> -/etc/init.d/network restart
>> -
>> -if [ -n "$ETHMESHMAC" ]; then
>> - if uci get network.ethmesh.macaddr
>> - then
>> - echo "MAC for ethmesh is set already"
>> - else
>> - echo "Fixing MAC on $SWITCHDEV.3 (ethmesh)"
>> - sleep 10
>> -
>> - uci set network.ethmesh.macaddr=$ETHMESHMAC
>> - uci commit network
>> -
>> - ifconfig $SWITCHDEV.3 down
>> - ifconfig $SWITCHDEV.3 hw ether $ETHMESHMAC
>> - ifconfig $SWITCHDEV.3 up
>> - /etc/init.d/network restart
>> - fi
>> -fi
>> -
>> -if [ -n "$ROUTERMAC" ]; then
>> - if uci get network.mesh.macaddr
>> - then
>> - echo "MAC for mesh is set already"
>> - else
>> - echo "Fixing MAC on br-mesh (mesh)"
>> - sleep 10
>> -
>> - uci set network.mesh.macaddr=$ROUTERMAC
>> - uci commit network
>> -
>> - ifconfig br-mesh down
>> - ifconfig br-mesh hw ether $ROUTERMAC
>> - ifconfig br-mesh up
>> - /etc/init.d/network restart
>> - fi
>> -fi
>> -
>> -if [ -n "$ETH0MAC" ]; then
>> - echo "Fixing MAC on eth0"
>> - sleep 10
>> - NEW_MACADDR=$(cat "/sys/class/net/${ETH0MAC}/address")
>> - uci set network.eth0.macaddr=$NEW_MACADDR
>> - uci commit network
>> - ifconfig eth0 down
>> - ifconfig eth0 hw ether $NEW_MACADDR
>> - ifconfig eth0 up
>> - /etc/init.d/network restart
>> -fi
>> -
>> -if uci -q get "network.mesh.ip6addr" > /dev/null
>> -then
>> - echo "IPv6 for mesh is set already"
>> -else
>> - echo "Setting IPv6 addresses"
>> - # Some time needed :(
>> - sleep 5
>> -
>> - for ip in $(ip -6 addr show br-mesh | awk '/fdff/{ print $2 }'); do
>> - ip -6 addr del $ip dev br-mesh
>> - done
>> -
>> - prefix="fdff:0::/64"
>> - # Set $prefix::MAC as IP
>> - addr="$(ipMacAssemble "$prefix" "$ROUTERMAC")"
>> - ip -6 addr add $addr dev br-mesh
>> -
>> - uci -q del network.globals
>> - uci -q set network.globals=globals
>> - uci -q set network.globals.ula_prefix=$prefix
>> - uci -q add_list network.mesh.ip6addr=$addr
>> - uci -q set network.mesh.proto=static
>> -
>> - # Set $prefix::1 as IP
>> - addr="$(ipAssemble "$prefix" "1")"
>> - ip -6 addr add $addr dev br-mesh
>> - uci -q add_list network.mesh.ip6addr=$addr
>> -
>> - # Set $prefix::link-local as IP
>> - addr="$(ipEUIAssemble "$prefix" "$ROUTERMAC")"
>> - ip -6 addr add $addr dev br-mesh
>> - uci -q add_list network.mesh.ip6addr=$addr
>> -
>> - uci -q commit network
>> -
>> - /etc/init.d/fff-uradvd restart
>> -fi
>> diff --git a/src/packages/fff/fff-sysupgrade/Makefile
>> b/src/packages/fff/fff-sysupgrade/Makefile
>> index 90ef66af..0e6c08ec 100644
>> --- a/src/packages/fff/fff-sysupgrade/Makefile
>> +++ b/src/packages/fff/fff-sysupgrade/Makefile
>> @@ -1,8 +1,7 @@
>> include $(TOPDIR)/rules.mk
>>
>> PKG_NAME:=fff-sysupgrade
>> -PKG_VERSION:=9
>> -PKG_RELEASE:=1
>> +PKG_RELEASE:=10
>>
>> PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
>>
>> diff --git
>> a/src/packages/fff/fff-sysupgrade/files/etc/uci-defaults/99-fff-sysupgrade
>> b/src/packages/fff/fff-sysupgrade/files/etc/uci-defaults/99-fff-sysupgrade
>> index 7ff83f54..f5783687 100644
>> ---
>> a/src/packages/fff/fff-sysupgrade/files/etc/uci-defaults/99-fff-sysupgrade
>> +++
>> b/src/packages/fff/fff-sysupgrade/files/etc/uci-defaults/99-fff-sysupgrade
>> @@ -7,7 +7,6 @@ cat > /etc/sysupgrade.conf <<-__EOF__
>> /etc/dropbear/dropbear_dss_host_key
>> /etc/dropbear/dropbear_rsa_host_key
>> /etc/dropbear/authorized_keys
>> -/etc/network.config
>> /etc/config/fff
>> /etc/hoodfile
>> __EOF__
>> --
>> 2.11.0
Mehr Informationen über die Mailingliste franken-dev