[PATCH v2 10/10] Add support for second port of Nanostation M

[Adrian Schmutzler]

Auch hier gibt es noch ein paar Änderungen.

Diese sind bereits als erster Patch der FritzBox-Serie im Patchwork:
https://pw.freifunk-franken.de/patch/1071/

Der FritzBox-Patch 1 wird dann quasi hier reingematscht.

Grüße

Adrian

> -----Original Message-----
> From: franken-dev [mailto:franken-dev-bounces at freifunk.net] On Behalf Of
> Adrian Schmutzler
> Sent: Sonntag, 14. April 2019 01:26
> To: franken-dev at freifunk.net
> Subject: [PATCH v2 10/10] Add support for second port of Nanostation M
> 
> Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> 
> ---
> 
> This is not tested.
> 
> Changes in v2:
> - Added patch
> ---
>  .../files/etc/uci-defaults/22b-config-ports        |  6 +++-
>  .../files/lib/functions/fff/networksetup           | 33
> ++++++++++++++++++++++
>  .../fff/fff-network/files/usr/sbin/settwoeth       | 26 +++++++++++++++++
>  3 files changed, 64 insertions(+), 1 deletion(-)
>  create mode 100755 src/packages/fff/fff-network/files/usr/sbin/settwoeth
> 
> diff --git
> a/src/packages/fff/fff-network/files/etc/uci-defaults/22b-config-ports
> b/src/packages/fff/fff-network/files/etc/uci-defaults/22b-config-ports
> index e2887228..372a6c59 100644
> --- a/src/packages/fff/fff-network/files/etc/uci-defaults/22b-config-ports
> +++ b/src/packages/fff/fff-network/files/etc/uci-defaults/22b-config-ports
> @@ -71,6 +71,11 @@ case "$BOARD" in
>  		setupSwitch "eth0" "1 2 0t" "3 4 0t" "5 0t"
>  		setupWan "eth0.2"
>  		;;
> +	ubnt-nano-m)
> +		setupOnePort "eth0" "WAN"
> +		setup2ndEth "eth1" "CLIENT"
> +		uci -q set "fff.ui.portsetup=twoeth"
> +		;;
>  	cpe210-v2|\
>  	cpe210-v3|\
>  	tl-mr3020-v1|\
> @@ -80,7 +85,6 @@ case "$BOARD" in
>  	ubnt-bullet-m|\
>  	ubnt-loco-m|\
>  	ubnt-loco-m-xw|\
> -	ubnt-nano-m|\
>  	ubnt-pico-m|\
>  	ubnt-power-m-xw|\
>  	ubnt-unifi|\
> diff --git
> a/src/packages/fff/fff-network/files/lib/functions/fff/networksetup
> b/src/packages/fff/fff-network/files/lib/functions/fff/networksetup
> index d9f91200..0478cf59 100644
> --- a/src/packages/fff/fff-network/files/lib/functions/fff/networksetup
> +++ b/src/packages/fff/fff-network/files/lib/functions/fff/networksetup
> @@ -161,3 +161,36 @@ setupOnePort() {
>  	fi
>  	uci commit network
>  }
> +
> +setup2ndEth() {
> +	# Set up second port for devices with to ports directly connected
> to ethX (no switch)
> +	# This is intended for initial setup and for updates
> +	#
> +	# Use this in combination with setupOnePort() for the first port.
> +	# Calling setupOnePort() will overwrite the settings made here, so
> always call in succession, e.g.
> +	# setupOnePort eth0 "WAN"
> +	# setup2ndEth eth1 "BATMAN"
> +	#
> +	# Usage: setup2ndEth <DEV, e.g. eth1> <ETHMODE: BATMAN or
> CLIENT>
> +
> +	local DEV=$1
> +	local ETHMODE=$2
> +
> +	uci set "network.$DEV=interface"
> +	uci set "network.$DEV.ifname=$DEV"
> +
> +	local meshif="$(uci -q get network.mesh.ifname | sed "s/
> *$DEV//")"
> +	local ethmeshif="$(uci -q get network.ethmesh.ifname | sed "s/
> *$DEV//")"
> +	if [ "$ETHMODE" = "CLIENT" ] ; then
> +		uci set network.mesh.ifname="$meshif $DEV"
> +		if [ -n "$ethmesif" ]; then
> +			uci set network.ethmesh.ifname="$ethmesif"
> +		else
> +			uci del network.ethmesh.ifname
> +		fi
> +	else # default=BATMAN
> +		uci set network.mesh.ifname="$meshif"
> +		uci set network.ethmesh.ifname="$ethmesif $DEV"
> +	fi
> +	uci commit network
> +}
> diff --git a/src/packages/fff/fff-network/files/usr/sbin/settwoeth
> b/src/packages/fff/fff-network/files/usr/sbin/settwoeth
> new file mode 100755
> index 00000000..b2489789
> --- /dev/null
> +++ b/src/packages/fff/fff-network/files/usr/sbin/settwoeth
> @@ -0,0 +1,26 @@
> +#!/bin/sh
> +
> +if ! [ "$(uci -q get fff.ui.portsetup)" = "twoeth" ] ; then
> +	echo "Wrong device. This is for Nanostation M only!"
> +	exit 1
> +fi
> +
> +. /lib/functions/fff/networksetup
> +
> +ETHMODE1=$1
> +ETHMODE2=$2
> +
> +if ! ([ "$ETHMODE1" = "WAN" ] || [ "$ETHMODE1" = "CLIENT" ] || [
> "$ETHMODE1" = "BATMAN" ]); then
> +	echo "Wrong port mode for first port. Choose one of: WAN, CLIENT,
> BATMAN"
> +	exit 1
> +fi
> +if ! ([ "$ETHMODE2" = "CLIENT" ] || [ "$ETHMODE2" = "BATMAN" ]); then
> +	echo "Wrong port mode for second port. Choose one of: CLIENT,
> BATMAN"
> +	exit 1
> +fi
> +
> +setupOnePort "eth0" "$ETHMODE1"
> +setup2ndEth "eth1" "$ETHMODE2"
> +/etc/init.d/network restart
> +echo "Port updated successfully."
> +
> --
> 2.11.0
-------------- nächster Teil --------------
Ein Dateianhang mit Binärdaten wurde abgetrennt...
Dateiname   : nicht verfügbar
Dateityp    : application/pgp-signature
Dateigröße  : 834 bytes
Beschreibung: nicht verfügbar
URL         : <https://{'listname': 'franken-dev-freifunk.net', 'hostname': 'lists.freifunk.net'}/pipermail/franken-dev-freifunk.net/attachments/20190418/1a5de362/attachment.sig>