[PATCH 3/8] fff-network: Reorganize network initialization

Christian Dresel fff at chrisi01.de
Fr Apr 12 13:11:34 CEST 2019


Hi

ich hab mal drüber geguckt und grundsätzlich gefällt mir die Idee schon
mal sehr gut. Wesentlich besser als dieses hässliche configurenetwork.
Ich muss mir das nochmal alles genauer angucken und auch mal
ausprobieren aber hier sind mir paar Sachen ins Auge gefallen, bzw. eine
Frage:

On 10.04.19 16:31, Adrian Schmutzler wrote:
> This removes the configurenetwork script and replaces it by some
> scripts run only during first boot.
>
> This introduces several changes:
> - The different tasks dealt with in configurenetwork are split.
>   Thus, one script deals with switch/port setup, one with br-mesh
>   MAC address, one with ETHMESHMAC, and one with IP addresses.
>   This makes the whole approach more modular, compared to the
>   monolithic configurenetwork.
> - Where configurenetwork contained sophisticated, nested conditions
>   to account for all possible combinations of variables, the new
>   approach is inspired by OpenWrt's board.d subfiles. Instead of
>   defining variables, we now directly call function in a
>   select-case. This is much more flexible, as we can just put code
>   there for a special case instead of bending configurenetwork for
>   it.
> - The select-case accounts for the various cases of similar/same
>   parameters of multiple devices, which can be grouped now.
> - Scripts are run only at first boot. Later changes have to be
>   done manually (we will provide some scripts later). Those will
>   typically be limited to changing only the ports; no need to run
>   whole network config again.
> - network.mode and network.config will disappear. For switch-based
>   devices, there is no advantage of using network.config compared
>   directly editing /etc/config/network. Upgrade-safety can be
>   established by putting uci commands in an upgrade-safe script
>   file (to be provided in a later patch).
>
> After this patch, show_info and the ports display in WebUI are
> broken. Those will be fixed in a later patch.
>
> Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> ---
>  bsp/default/root_file_system/etc/rc.local          |   4 -
>  src/packages/fff/fff-network/Makefile              |   4 +-
>  .../files/etc/uci-defaults/22a-config-routermac    |  54 +++++
>  .../files/etc/uci-defaults/22b-config-ports        |  91 +++++++
>  .../files/etc/uci-defaults/22c-config-ethmesh      |  72 ++++++
>  .../files/etc/uci-defaults/23-config-ipaddr        |  35 +++
>  .../files/lib/functions/fff/networksetup           | 155 ++++++++++++
>  .../fff-network/files/lib/functions/fff/portorder  |  31 +++
>  .../fff-network/files/usr/sbin/configurenetwork    | 263 ---------------------
>  src/packages/fff/fff-sysupgrade/Makefile           |   3 +-
>  .../files/etc/uci-defaults/99-fff-sysupgrade       |   1 -
>  11 files changed, 440 insertions(+), 273 deletions(-)
>  create mode 100644 src/packages/fff/fff-network/files/etc/uci-defaults/22a-config-routermac
>  create mode 100644 src/packages/fff/fff-network/files/etc/uci-defaults/22b-config-ports
>  create mode 100644 src/packages/fff/fff-network/files/etc/uci-defaults/22c-config-ethmesh
>  create mode 100644 src/packages/fff/fff-network/files/etc/uci-defaults/23-config-ipaddr
>  create mode 100644 src/packages/fff/fff-network/files/lib/functions/fff/networksetup
>  create mode 100644 src/packages/fff/fff-network/files/lib/functions/fff/portorder
>  delete mode 100755 src/packages/fff/fff-network/files/usr/sbin/configurenetwork
>
> diff --git a/bsp/default/root_file_system/etc/rc.local b/bsp/default/root_file_system/etc/rc.local
> index 59042c37..e02368a5 100755
> --- a/bsp/default/root_file_system/etc/rc.local
> +++ b/bsp/default/root_file_system/etc/rc.local
> @@ -2,10 +2,6 @@
>  # Put your custom commands here that should be executed once
>  # the system init finished. By default this file does nothing.
>  
> -/usr/sbin/configurenetwork
> -
> -sleep 3
> -
>  /usr/sbin/configurehood
>  
>  touch /tmp/started
> diff --git a/src/packages/fff/fff-network/Makefile b/src/packages/fff/fff-network/Makefile
> index e9335884..11796797 100644
> --- a/src/packages/fff/fff-network/Makefile
> +++ b/src/packages/fff/fff-network/Makefile
> @@ -1,8 +1,7 @@
>  include $(TOPDIR)/rules.mk
>  
>  PKG_NAME:=fff-network
> -PKG_VERSION:=10
> -PKG_RELEASE:=1
> +PKG_RELEASE:=11
>  
>  PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
>  
> @@ -34,7 +33,6 @@ endef
>  
>  define Package/$(PKG_NAME)/install
>  	$(CP) ./files/* $(1)/
> -	test -d ./$(BOARD) && $(CP) ./$(BOARD)/* $(1)/etc/
>  endef
>  
>  $(eval $(call BuildPackage,$(PKG_NAME)))
> diff --git a/src/packages/fff/fff-network/files/etc/uci-defaults/22a-config-routermac b/src/packages/fff/fff-network/files/etc/uci-defaults/22a-config-routermac
> new file mode 100644
> index 00000000..b21bbb56
> --- /dev/null
> +++ b/src/packages/fff/fff-network/files/etc/uci-defaults/22a-config-routermac
> @@ -0,0 +1,54 @@
> +#!/bin/sh
> +# Copyright 2019 Adrian Schmutzler
> +# License GPLv3
> +
> +BOARD="$(uci get board.model.name)"
> +
> +. /lib/functions/fff/networksetup
> +
> +. /lib/functions.sh
> +. /lib/functions/system.sh
> +
> +case "$BOARD" in
> +	archer-c7-v2|\
> +	tl-wr841-v8|\
> +	tl-wr842n-v2|\
> +	tl-wr1043nd-v2|\
> +	tl-wr1043nd-v3)
> +		ROUTERMAC=$(cat /sys/class/net/eth1/address)
> +		;;
> +	cpe210-v2|\
> +	cpe210-v3|\
> +	tl-wa850re-v1|\
> +	tl-wa860re-v1|\
> +	tl-wa901nd-v2|\
> +	tl-wdr3500-v1|\
> +	tl-wr740n-v4|\
> +	tl-wr740nd-v4|\
> +	tl-wr741nd-v2|\
> +	tl-wr741nd-v4|\
> +	tl-wr841-v7|\
> +	ubnt-bullet-m|\
> +	ubnt-loco-m|\
> +	ubnt-loco-m-xw|\
> +	ubnt-nano-m|\
> +	ubnt-pico-m|\
> +	ubnt-power-m-xw|\
> +	ubnt-unifi)
> +		ROUTERMAC=$(cat /sys/class/ieee80211/phy0/macaddress)
> +		;;
> +	tl-wdr3600-v1|\
> +	tl-wdr4300-v1|\
> +	tl-wdr4310-v1)
> +		ROUTERMAC=$(cat /sys/class/ieee80211/phy1/macaddress)
> +		;;
> +	ubnt-unifiac-lite|\
> +	ubnt-unifiac-mesh)
> +		ROUTERMAC=$(mtd_get_mac_binary EEPROM 0x0)
> +		;;
> +	*)
> +		ROUTERMAC=$(cat /sys/class/net/eth0/address)
> +		;;
> +esac
> +
> +fixMac "$ROUTERMAC" "mesh"
> diff --git a/src/packages/fff/fff-network/files/etc/uci-defaults/22b-config-ports b/src/packages/fff/fff-network/files/etc/uci-defaults/22b-config-ports
> new file mode 100644
> index 00000000..a18dbd99
> --- /dev/null
> +++ b/src/packages/fff/fff-network/files/etc/uci-defaults/22b-config-ports
> @@ -0,0 +1,91 @@
> +#!/bin/sh
> +# Copyright 2019 Adrian Schmutzler
> +# License GPLv3
> +
> +BOARD="$(uci get board.model.name)"
> +
> +. /lib/functions/fff/networksetup
> +
> +case "$BOARD" in
> +	archer-c7-v2)
> +		setupSwitch "eth1" "4 5 0t" "2 3 0t" "1 6"
> +		setupWan "eth0"
> +		;;
> +	archer-c25-v1|\
> +	archer-c60-v1)
> +		setupSwitch "eth1" "1 2 0t" "3 4 0t"
> +		setupWan "eth0"
> +		;;
> +	cpe210|\
> +	cpe510)
> +		# Default: LAN0: WAN, LAN1: CLIENT
> +		setupSwitch "eth0" "0t 4" "0t" "0t 5"
> +		setupWan "eth0.2"
> +		;;
> +	gl-ar150)
> +		# Default: CLIENT
> +		setupSwitch "eth1" "0t 1" "0t"
> +		setupWan "eth0"
> +		;;
> +	tl-wdr3500-v1|\
> +	tl-wr741nd-v2|\
> +	tl-wr841-v7|\
> +	tl-wr841-v9|\
> +	tl-wr841-v10|\
> +	tl-wr841-v11|\
> +	tl-wr841-v12)
> +		setupSwitch "eth0" "1 2 0t" "3 4 0t"
> +		setupWan "eth1"
> +		;;
> +	tl-wdr3600-v1|\
> +	tl-wdr4300-v1|\
> +	tl-wdr4310-v1|\
> +	tl-wdr4900-v1)
> +		setupSwitch "eth0" "4 5 0t" "2 3 0t" "1 0t"
> +		setupWan "eth0.2"
> +		;;
> +	tl-wr841-v8|\
> +	tl-wr842n-v2)
> +		setupSwitch "eth1" "1 4 0t" "2 3 0t"
> +		setupWan "eth0"
> +		;;
> +	tl-wr740n-v4|\
> +	tl-wr740nd-v4|\
> +	tl-wr741nd-v4)
> +		setupSwitch "eth0" "1 4 0t" "2 3 0t"
> +		setupWan "eth1"
> +		;;
> +	tl-wr1043nd-v1)
> +		setupSwitch "eth0" "3 4 5t" "1 2 5t" "0 5t"
> +		setupWan "eth0.2"
> +		;;
> +	tl-wr1043nd-v2|\
> +	tl-wr1043nd-v3)
> +		setupSwitch "eth0" "1 2 6t" "3 4 6t" "5 6t"
> +		setupWan "eth0.2"
> +		;;
> +	tl-wr1043nd-v4|\
> +	tl-wr1043n-v5)
> +		setupSwitch "eth0" "1 2 0t" "3 4 0t" "5 0t"
> +		setupWan "eth0.2"
> +		;;
> +	cpe210-v2|\
> +	cpe210-v3|\
> +	tl-mr3020-v1|\
> +	tl-wa850re-v1|\
> +	tl-wa860re-v1|\
> +	tl-wa901nd-v2|\
> +	ubnt-bullet-m|\
> +	ubnt-loco-m|\
> +	ubnt-loco-m-xw|\
> +	ubnt-nano-m|\
> +	ubnt-pico-m|\
> +	ubnt-power-m-xw|\
> +	ubnt-unifi|\
> +	ubnt-unifiac-lite|\
> +	ubnt-unifiac-mesh)
> +		setupOnePort "eth0" "CLIENT"
> +		;;

wenn ich ein Device mit 2 Ethernetports habe die keinen Switch haben
(also eth0 und eth1) würde da dann sowas in dieser Art gehen?

devicex

    setupOnePort "eth0" "WAN"

    setupOnePort "eth1" "Client"

    ;;

müsste eigentlich oder übersehe ich etwas?

Vielleicht kann man dann die Funktion unbenennen in setupNoSwitchPort
oder sowas (lass dir was einfallen ;)), wo es eindeutiger ist das dies
nicht nur bei 1 Port devices geht sondern auch bei solchen wie oben
beschrieben.

> +esac
> +
> +/etc/init.d/network restart
> diff --git a/src/packages/fff/fff-network/files/etc/uci-defaults/22c-config-ethmesh b/src/packages/fff/fff-network/files/etc/uci-defaults/22c-config-ethmesh
> new file mode 100644
> index 00000000..e9c533f3
> --- /dev/null
> +++ b/src/packages/fff/fff-network/files/etc/uci-defaults/22c-config-ethmesh
> @@ -0,0 +1,72 @@
> +#!/bin/sh
> +# Copyright 2019 Adrian Schmutzler
> +# License GPLv3
> +
> +BOARD="$(uci get board.model.name)"
> +
> +. /lib/functions/fff/networksetup
> +
> +. /lib/functions.sh
> +. /lib/functions/system.sh
> +
> +# use mac address from phyX with 'locally administered' bit set to '1'
> +# only possible, because wXmesh is created first and therefore gets the 'universally administered address'
> +
> +case "$BOARD" in
> +	archer-c7-v2|\
> +	tl-wr841-v8|\
> +	tl-wr842n-v2)
> +		ETHMESHMAC=$(cat /sys/class/net/eth0/address)
> +		;;
> +	archer-c25-v1|\
> +	archer-c60-v2|\
> +	tl-wr740n-v4|\
> +	tl-wr740nd-v4|\
> +	tl-wr741nd-v2|\
> +	tl-wr741nd-v4|\
> +	tl-wr841-v7|\
> +	tl-wr841-v9|\
> +	tl-wr841-v10|\
> +	tl-wr841-v11|\
> +	tl-wr841-v12)
> +		ETHMESHMAC=$(cat /sys/class/net/eth1/address)
> +		;;
> +	cpe210|\
> +	cpe210-v2|\
> +	cpe210-v3|\
> +	cpe510|\
> +	tl-wa850re-v1|\
> +	tl-wa860re-v1|\
> +	tl-wa901nd-v2|\
> +	tl-wr1043nd-v1|\
> +	ubnt-bullet-m|\
> +	ubnt-loco-m|\
> +	ubnt-loco-m-xw|\
> +	ubnt-nano-m|\
> +	ubnt-pico-m|\
> +	ubnt-power-m-xw|\
> +	ubnt-unifi)
> +		ETHMESHMAC=$(macFlipLocalBit "$(cat /sys/class/ieee80211/phy0/macaddress)")
> +		;;
> +	gl-ar150|\
> +	tl-mr3020-v1)
> +		ETHMESHMAC=$(macFlipLocalBit "$(cat /sys/class/net/eth0/address)")
> +		;;
> +	tl-wdr4900-v1)
> +		ETHMESHMAC=$(macFlipLocalBit "$(cat /sys/class/ieee80211/phy1/macaddress)")
> +		;;
> +	tl-wr1043nd-v4)
> +		ETHMESHMAC=$(mtd_get_mac_binary config 0x1017c)
> +		;;
> +	tl-wr1043n-v5)
> +		ETHMESHMAC=$(macaddr_add $(mtd_get_mac_binary product-info 8) 1)
> +		;;
> +	ubnt-unifiac-lite|\
> +	ubnt-unifiac-mesh)
> +		ETHMESHMAC=$(macFlipLocalBit "$(mtd_get_mac_binary EEPROM 0x0)")
> +		;;
> +esac
> +
> +if [ -n "$ETHMESHMAC" ]; then
> +	fixMac "$ETHMESHMAC" "ethmesh"
> +fi
> diff --git a/src/packages/fff/fff-network/files/etc/uci-defaults/23-config-ipaddr b/src/packages/fff/fff-network/files/etc/uci-defaults/23-config-ipaddr
> new file mode 100644
> index 00000000..278b2a96
> --- /dev/null
> +++ b/src/packages/fff/fff-network/files/etc/uci-defaults/23-config-ipaddr
> @@ -0,0 +1,35 @@
> +#!/bin/sh
> +# Copyright 2019 Adrian Schmutzler
> +# License GPLv3
> +
> +. /lib/functions/fff/network
> +
> +echo "Setting IPv6 addresses"
> +# Some time needed :(
> +sleep 5
> +
> +ROUTERMAC=$(uci get network.mesh.macaddr)
> +prefix="fdff:0::/64"
> +
> +# Set $prefix::MAC as IP
> +addr="$(ipMacAssemble "$prefix" "$ROUTERMAC")"
> +ip -6 addr add "$addr" dev br-mesh
> +
> +uci -q set network.globals=globals
> +uci -q set "network.globals.ula_prefix=$prefix"
> +uci -q add_list "network.mesh.ip6addr=$addr"
> +uci -q set network.mesh.proto=static
> +
> +# Set $prefix::1 as IP
> +addr="$(ipAssemble "$prefix" "1")"
> +ip -6 addr add "$addr" dev br-mesh
> +uci -q add_list "network.mesh.ip6addr=$addr"
> +
> +# Set $prefix::link-local as IP
> +addr="$(ipEUIAssemble "$prefix" "$ROUTERMAC")"
> +ip -6 addr add "$addr" dev br-mesh
> +uci -q add_list "network.mesh.ip6addr=$addr"
> +
> +uci -q commit network
> +
> +/etc/init.d/fff-uradvd restart
> diff --git a/src/packages/fff/fff-network/files/lib/functions/fff/networksetup b/src/packages/fff/fff-network/files/lib/functions/fff/networksetup
> new file mode 100644
> index 00000000..f17278b7
> --- /dev/null
> +++ b/src/packages/fff/fff-network/files/lib/functions/fff/networksetup
> @@ -0,0 +1,155 @@
> +# Copyright 2019 Adrian Schmutzler
> +# License GPLv3
> +
> +. /lib/functions/network.sh
> +
> +setAutoConf() {
> +	# Sets ipv6 auto configuration on an interface to on/off
> +	# Usage: setAutoConf <interface> <[0|1]>
> +	local iface=$1
> +	local on=$2
> +
> +	sysctlfile="/etc/sysctl.d/51-fff-network-$iface.conf"
> +	echo "# Generated from configurenetwork" > "$sysctlfile"
> +	echo "net.ipv6.conf.$iface.accept_ra = $on" >> "$sysctlfile"
> +	echo "net.ipv6.conf.$iface.accept_ra_defrtr = $on" >> "$sysctlfile"
> +	echo "net.ipv6.conf.$iface.accept_ra_pinfo = $on" >> "$sysctlfile"
> +	echo "net.ipv6.conf.$iface.autoconf = $on" >> "$sysctlfile"
> +	echo "net.ipv6.conf.$iface.accept_ra_rtr_pref = $on" >> "$sysctlfile"
> +	echo "net.ipv6.conf.$iface.forwarding = 0" >> "$sysctlfile"
> +
> +	/sbin/sysctl -p "$sysctlfile"
> +}
> +
> +enableAutoConf() {
> +	# Enables ipv6 auto configuration on an interface
> +	# Usage: enableAutoConf <interface>
> +	local iface=$1
> +
> +	setAutoConf "$iface" "1"
> +}
> +
> +disableAutoConf() {
> +	# Disables ipv6 auto configuration on an interface
> +	# Usage: disableAutoConf <interface>
> +	local iface=$1
> +
> +	setAutoConf "$iface" "0"
> +}
> +
> +fixMac() {
> +	# Update MAC address on device/interface
> +	#
> +	# fixMac <newmac> <interface>
> +	#
> +	# newmac: MAC address to be set
> +	# interface: Interface to be updated as in uci (e.g. mesh)
> +
> +	local newmac=$1
> +	local iface=$2
> +	local dev
> +
> +	echo "Fixing MAC on $iface"
> +	sleep 10
> +
> +	network_get_physdev dev "$iface"
> +
> +	uci set "network.${iface}.macaddr=$newmac"
> +	uci -q commit network
> +
> +	if [ -n "$dev" ]; then
> +		ip link set "$dev" down
> +		ip link set "$dev" address "$newmac"
> +		ip link set "$dev" up
> +	fi
> +
> +	/etc/init.d/network restart
> +}
> +
> +setupSwitch() {
> +	# blabla, only initial, no update
soll der Kommentar so?
> +	# Usage: setupSwitch <SWITCHDEV, e.g. eth0> <CLIENT_PORTS> <BATMAN_PORTS> [<WAN_PORTS>]
> +
> +	local SWITCHDEV=$1
> +	local CLIENT_PORTS=$2
> +	local BATMAN_PORTS=$3
> +	local WAN_PORTS=$4
> +	local SWITCHHW
> +
> +	SWITCHHW="$(swconfig list | awk '{ print $4 }')"
> +
> +	uci set "network.${SWITCHDEV}=switch"
> +	uci set "network.${SWITCHDEV}.name=$SWITCHHW"
> +	uci set "network.${SWITCHDEV}.enable=1"
> +	uci set "network.${SWITCHDEV}.reset=1"
> +	uci set "network.${SWITCHDEV}.enable_vlan=1"
> +
> +	uci set "network.${SWITCHDEV}_1=switch_vlan"
> +	uci set "network.${SWITCHDEV}_1.device=$SWITCHHW"
> +	uci set "network.${SWITCHDEV}_1.vlan=1"
> +	uci set "network.${SWITCHDEV}_1.ports=$CLIENT_PORTS"
> +
> +	# This defines the VLAN for WAN ports inside the switch.
> +	# This is required even if the WAN eth is separate, but the WAN port is in the switch!
> +	if [ -n "$WAN_PORTS" ]; then
> +		uci set "network.${SWITCHDEV}_2=switch_vlan"
> +		uci set "network.${SWITCHDEV}_2.device=$SWITCHHW"
> +		uci set "network.${SWITCHDEV}_2.vlan=2"
> +		uci set "network.${SWITCHDEV}_2.ports=$WAN_PORTS"
> +	fi
> +
> +	uci set "network.${SWITCHDEV}_3=switch_vlan"
> +	uci set "network.${SWITCHDEV}_3.device=$SWITCHHW"
> +	uci set "network.${SWITCHDEV}_3.vlan=3"
> +	uci set "network.${SWITCHDEV}_3.ports=$BATMAN_PORTS"
> +
> +	uci set network.mesh.ifname="$SWITCHDEV.1 bat0"
> +	uci set network.ethmesh.ifname="$SWITCHDEV.3"
> +
> +	uci -q commit network
> +}
> +
> +setupWan() {
> +	# blabla, only initial, no update
siehe oben
> +	# Usage: setupWan <WANDEV, e.g. eth0, eth0.2>
> +
> +	local WANDEV=$1
> +
> +	# This defines the WAN interface. We use the VLAN ID only if we do NOT have a separate eth.
> +	# This is different from the criterion for the WAN port dealt with above!
> +	# If the WANDEV is different from the SWITCHDEV, but the WAN port is in the switch,
> +	# the WAN eth has to be connected to the switch untagged!
> +	enableAutoConf "$WANDEV"
> +	uci set network.wan.ifname="$WANDEV"
> +
> +	uci -q commit network
> +}
> +
> +setupOnePort() {
> +	# blabla, initial and update

siehe oben

Gruß

Christian

> +	# Usage: setupOnePort <DEV, e.g. eth0> <ETHMODE, e.g. BATMAN, CLIENT, WAN>
> +
> +	local DEV=$1
> +	local ETHMODE=$2
> +
> +	uci set "network.$DEV=interface"
> +	uci set "network.$DEV.ifname=$DEV"
> +	# TODO: Check if eth0 address is set from OpenWrt (is it overwritten then by ethmesh?)
> +	if [ "$ETHMODE" = "WAN" ]; then
> +		enableAutoConf "$DEV"
> +		uci set network.mesh.ifname="bat0"
> +		uci set network.wan.ifname="$DEV"
> +		uci del network.ethmesh.ifname
> +	elif [ "$ETHMODE" = "CLIENT" ] ; then
> +		disableAutoConf "$DEV"
> +		uci set network.mesh.ifname="bat0 $DEV"
> +		uci set network.wan.ifname="eth1" # eth1 because it is default in config file
> +		uci del network.ethmesh.ifname
> +	else # default=BATMAN
> +		disableAutoConf "$DEV"
> +		uci set network.mesh.ifname="bat0"
> +		uci set network.wan.ifname="eth1" # eth1 because it is default in config file
> +		uci set network.ethmesh.ifname="$DEV"
> +	fi
> +	uci -q commit network
> +}
> diff --git a/src/packages/fff/fff-network/files/lib/functions/fff/portorder b/src/packages/fff/fff-network/files/lib/functions/fff/portorder
> new file mode 100644
> index 00000000..377c302f
> --- /dev/null
> +++ b/src/packages/fff/fff-network/files/lib/functions/fff/portorder
> @@ -0,0 +1,31 @@
> +# Copyright 2019 Adrian Schmutzler
> +# License GPLv3
> +
> +BOARD="$(uci get board.model.name)"
> +
> +case "$BOARD" in
> +	archer-c25-v1|\
> +	archer-c60-v1|\
> +	tl-wr841-v10|\
> +	tl-wr841-v11|\
> +	tl-wr841-v12)
> +		PORTORDER="4 3 2 1"
> +		;;
> +	cpe210|\
> +	cpe510)
> +		PORTORDER="5 4"
> +		;;
> +	gl-ar150)
> +		PORTORDER="1"
> +		;;
> +	tl-wdr4300-v1)
> +		PORTORDER="1 2 3 4 5"
> +		;;
> +	tl-wr841-v8)
> +		PORTORDER="2 3 4 1"
> +		;;
> +	tl-wr1043nd-v4|\
> +	tl-wr1043n-v5)
> +		PORTORDER="5 4 3 2 1"
> +		;;
> +esac
> diff --git a/src/packages/fff/fff-network/files/usr/sbin/configurenetwork b/src/packages/fff/fff-network/files/usr/sbin/configurenetwork
> deleted file mode 100755
> index 448bd04b..00000000
> --- a/src/packages/fff/fff-network/files/usr/sbin/configurenetwork
> +++ /dev/null
> @@ -1,263 +0,0 @@
> -#!/bin/sh
> -# This program is free software; you can redistribute it and/or modify
> -# it under the terms of the GNU General Public License as published by
> -# the Free Software Foundation; either version 3 of the License, or
> -# (at your option) any later version.
> -
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> -# GNU General Public License for more details.
> -
> -. /lib/functions/fff/network
> -
> -setupPorts() {
> -    # Add a single port to the *_PORTS config
> -    # Usage: setupPorts <port id> <port mode>
> -
> -    local port=$1
> -    local mode=$2
> -
> -    #default: BATMAN
> -    if [ "$mode" = "WAN" ] ; then
> -        WAN_PORTS="${WAN_PORTS} $port"
> -    elif [ "$mode" = "CLIENT" ] ; then
> -        CLIENT_PORTS="${CLIENT_PORTS} $port"
> -    else
> -        BATMAN_PORTS="${BATMAN_PORTS} $port"
> -    fi
> -}
> -
> -setAutoConf() {
> -    # Sets ipv6 auto configuration on an interface to on/off
> -    # Usage: setAutoConf <interface> <[0|1]>
> -    local iface=$1
> -    local on=$2
> -
> -    sysctlfile="/etc/sysctl.d/51-fff-network-$iface.conf"
> -    echo "# Generated from configurenetwork" > "$sysctlfile"
> -    echo "net.ipv6.conf.$iface.accept_ra = $on" >> "$sysctlfile"
> -    echo "net.ipv6.conf.$iface.accept_ra_defrtr = $on" >> "$sysctlfile"
> -    echo "net.ipv6.conf.$iface.accept_ra_pinfo = $on" >> "$sysctlfile"
> -    echo "net.ipv6.conf.$iface.autoconf = $on" >> "$sysctlfile"
> -    echo "net.ipv6.conf.$iface.accept_ra_rtr_pref = $on" >> "$sysctlfile"
> -    echo "net.ipv6.conf.$iface.forwarding = 0" >> "$sysctlfile"
> -
> -    /sbin/sysctl -p "$sysctlfile"
> -}
> -
> -enableAutoConf() {
> -    # Enables ipv6 auto configuration on an interface
> -    # Usage: enableAutoConf <interface>
> -    local iface=$1
> -
> -    setAutoConf "$iface" "1"
> -}
> -
> -disableAutoConf() {
> -    # Disables ipv6 auto configuration on an interface
> -    # Usage: disableAutoConf <interface>
> -    local iface=$1
> -
> -    setAutoConf "$iface" "0"
> -}
> -
> -BOARD="$(uci get board.model.name)"
> -. /etc/network.$BOARD
> -
> -if [ -s /etc/network.config ] ; then
> -    . /etc/network.config
> -else
> -    # Write network.config
> -    echo "CLIENT_PORTS='$CLIENT_PORTS'" > /etc/network.config
> -    echo "BATMAN_PORTS='$BATMAN_PORTS'" >> /etc/network.config
> -    if [ -n "$WAN_PORTS" ] ; then
> -        echo "WAN_PORTS='$WAN_PORTS'" >> /etc/network.config
> -    fi
> -    if [ "$ONE_PORT" = "YES" ] || [ -n "$ETHPORT" ] ; then
> -        echo "ETHMODE='$ETHMODE' # use BATMAN, CLIENT or WAN" >> /etc/network.config
> -    fi
> -    if [ -n "$LAN0PORT" ] ; then
> -        echo "LAN0MODE='$LAN0MODE' # use BATMAN, CLIENT or WAN" >> /etc/network.config
> -    fi
> -    if [ -n "$LAN1PORT" ] ; then
> -        echo "LAN1MODE='$LAN1MODE' # use BATMAN, CLIENT or WAN" >> /etc/network.config
> -    fi
> -    echo "FORCEPARSE='0' # Parse at: 0=first boot only, 1=every reboot, 2=next reboot (once)" >> /etc/network.config
> -fi
> -
> -if [ "$FORCEPARSE" = '2' ] ; then
> -    sed -i '/^FORCEPARSE/d' /etc/network.config
> -    echo "FORCEPARSE='0' # Parse at: 0=first boot only, 1=every reboot, 2=next reboot (once)" >> /etc/network.config
> -    FORCEPARSE='1'
> -fi
> -
> -if [ -n "$ETHPORT" ] ; then
> -    #LAN at AR150: default: BATMAN
> -    setupPorts "$ETHPORT" "${ETHMODE}"
> -fi
> -if [ -n "$LAN0PORT" ] ; then
> -    #LAN0 at two-port: default: BATMAN
> -    setupPorts "$LAN0PORT" "${LAN0MODE}"
> -fi
> -if [ -n "$LAN1PORT" ] ; then
> -    #LAN1 at two-port: default: BATMAN
> -    setupPorts "$LAN1PORT" "${LAN1MODE}"
> -fi
> -
> -if ! uci -q get network.$SWITCHDEV > /dev/null || [ "$FORCEPARSE" = '1' ] ; then
> -
> -    SWITCHHW=$(swconfig list | awk '{ print $4 }')
> -
> -    uci set network.$SWITCHDEV=switch
> -    uci set network.$SWITCHDEV.name=$SWITCHHW
> -    uci set network.$SWITCHDEV.enable=1
> -    uci set network.$SWITCHDEV.reset=1
> -    uci set network.$SWITCHDEV.enable_vlan=1
> -
> -    uci set network.${SWITCHDEV}_1=switch_vlan
> -    uci set network.${SWITCHDEV}_1.device=$SWITCHHW
> -    uci set network.${SWITCHDEV}_1.vlan=1
> -    uci set network.${SWITCHDEV}_1.ports="$CLIENT_PORTS"
> -
> -    if [ "$WANDEV" = "$SWITCHDEV" ] || ! [ -z "$WAN_PORTS" ]; then
> -        uci set network.${SWITCHDEV}_2=switch_vlan
> -        uci set network.${SWITCHDEV}_2.device=$SWITCHHW
> -        uci set network.${SWITCHDEV}_2.vlan=2
> -        uci set network.${SWITCHDEV}_2.ports="$WAN_PORTS"
> -
> -        enableAutoConf "$WANDEV.2"
> -    else
> -        enableAutoConf "$WANDEV"
> -    fi
> -    
> -    uci set network.${SWITCHDEV}_3=switch_vlan
> -    uci set network.${SWITCHDEV}_3.device=$SWITCHHW
> -    uci set network.${SWITCHDEV}_3.vlan=3
> -    uci set network.${SWITCHDEV}_3.ports="$BATMAN_PORTS"
> -
> -    uci set network.mesh.ifname="$SWITCHDEV.1 bat0"
> -
> -    uci set network.ethmesh.ifname="$SWITCHDEV.3"
> -
> -    if [ "$WANDEV" = "$SWITCHDEV" ]; then
> -        uci set network.wan.ifname=$WANDEV.2
> -    else
> -        uci set network.wan.ifname=$WANDEV
> -    fi
> -
> -    uci commit network
> -fi
> -
> -if [ "$ONE_PORT" = "YES" ] && ( ! uci -q get network.$SWITCHDEV.ifname || [ "$FORCEPARSE" = '1' ] ) ; then
> -    uci set network.$SWITCHDEV=interface
> -    uci set network.$SWITCHDEV.ifname=$SWITCHDEV
> -    if [ "$ETHMODE" = "WAN" ]; then
> -        enableAutoConf "$WANDEV"
> -        uci set network.mesh.ifname="bat0"
> -        uci set network.wan.ifname="$WANDEV"
> -        uci del uci set network.ethmesh.ifname
> -        uci del network.eth0.macaddr
> -    elif [ "$ETHMODE" = "CLIENT" ] ; then
> -        disableAutoConf "$WANDEV"
> -        uci set network.mesh.ifname="bat0 $SWITCHDEV"
> -        uci set network.wan.ifname="eth1" #eth1 because it is default in config file
> -        uci del network.ethmesh.ifname
> -        uci del network.eth0.macaddr
> -    elif [ "$ETHMODE" = "BATMAN" ] ; then
> -        disableAutoConf "$WANDEV"
> -        uci set network.mesh.ifname="bat0"
> -        uci set network.wan.ifname="eth1" #eth1 because it is default in config file
> -        uci set network.ethmesh.ifname="$SWITCHDEV"
> -        ETH0MAC="w2ap"
> -    fi
> -    uci commit network
> -fi
> -
> -/etc/init.d/network restart
> -
> -if [ -n "$ETHMESHMAC" ]; then
> -    if uci get network.ethmesh.macaddr
> -    then
> -        echo "MAC for ethmesh is set already"
> -    else
> -        echo "Fixing MAC on $SWITCHDEV.3 (ethmesh)"
> -        sleep 10
> -
> -        uci set network.ethmesh.macaddr=$ETHMESHMAC
> -        uci commit network
> -
> -        ifconfig $SWITCHDEV.3 down
> -        ifconfig $SWITCHDEV.3 hw ether $ETHMESHMAC
> -        ifconfig $SWITCHDEV.3 up
> -        /etc/init.d/network restart
> -    fi
> -fi
> -
> -if [ -n "$ROUTERMAC" ]; then
> -    if uci get network.mesh.macaddr
> -    then
> -        echo "MAC for mesh is set already"
> -    else
> -        echo "Fixing MAC on br-mesh (mesh)"
> -        sleep 10
> -
> -        uci set network.mesh.macaddr=$ROUTERMAC
> -        uci commit network
> -
> -        ifconfig br-mesh down
> -        ifconfig br-mesh hw ether $ROUTERMAC
> -        ifconfig br-mesh up
> -        /etc/init.d/network restart
> -    fi
> -fi
> -
> -if [ -n "$ETH0MAC" ]; then
> -        echo "Fixing MAC on eth0"
> -        sleep 10
> -        NEW_MACADDR=$(cat "/sys/class/net/${ETH0MAC}/address")
> -        uci set network.eth0.macaddr=$NEW_MACADDR
> -        uci commit network
> -        ifconfig eth0 down
> -        ifconfig eth0 hw ether $NEW_MACADDR
> -        ifconfig eth0 up
> -        /etc/init.d/network restart
> -fi
> -
> -if uci -q get "network.mesh.ip6addr" > /dev/null
> -then
> -    echo "IPv6 for mesh is set already"
> -else
> -    echo "Setting IPv6 addresses"
> -    # Some time needed :(
> -    sleep 5
> -
> -    for ip in $(ip -6 addr show br-mesh | awk '/fdff/{ print $2 }'); do
> -        ip -6 addr del $ip dev br-mesh
> -    done
> -
> -    prefix="fdff:0::/64"
> -    # Set $prefix::MAC as IP
> -    addr="$(ipMacAssemble "$prefix" "$ROUTERMAC")"
> -    ip -6 addr add $addr dev br-mesh
> -
> -    uci -q del network.globals
> -    uci -q set network.globals=globals
> -    uci -q set network.globals.ula_prefix=$prefix
> -    uci -q add_list network.mesh.ip6addr=$addr
> -    uci -q set network.mesh.proto=static
> -
> -    # Set $prefix::1 as IP
> -    addr="$(ipAssemble "$prefix" "1")"
> -    ip -6 addr add $addr dev br-mesh
> -    uci -q add_list network.mesh.ip6addr=$addr
> -
> -    # Set $prefix::link-local as IP
> -    addr="$(ipEUIAssemble "$prefix" "$ROUTERMAC")"
> -    ip -6 addr add $addr dev br-mesh
> -    uci -q add_list network.mesh.ip6addr=$addr
> -
> -    uci -q commit network
> -
> -    /etc/init.d/fff-uradvd restart
> -fi
> diff --git a/src/packages/fff/fff-sysupgrade/Makefile b/src/packages/fff/fff-sysupgrade/Makefile
> index 90ef66af..0e6c08ec 100644
> --- a/src/packages/fff/fff-sysupgrade/Makefile
> +++ b/src/packages/fff/fff-sysupgrade/Makefile
> @@ -1,8 +1,7 @@
>  include $(TOPDIR)/rules.mk
>  
>  PKG_NAME:=fff-sysupgrade
> -PKG_VERSION:=9
> -PKG_RELEASE:=1
> +PKG_RELEASE:=10
>  
>  PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
>  
> diff --git a/src/packages/fff/fff-sysupgrade/files/etc/uci-defaults/99-fff-sysupgrade b/src/packages/fff/fff-sysupgrade/files/etc/uci-defaults/99-fff-sysupgrade
> index 7ff83f54..f5783687 100644
> --- a/src/packages/fff/fff-sysupgrade/files/etc/uci-defaults/99-fff-sysupgrade
> +++ b/src/packages/fff/fff-sysupgrade/files/etc/uci-defaults/99-fff-sysupgrade
> @@ -7,7 +7,6 @@ cat > /etc/sysupgrade.conf <<-__EOF__
>  /etc/dropbear/dropbear_dss_host_key
>  /etc/dropbear/dropbear_rsa_host_key
>  /etc/dropbear/authorized_keys
> -/etc/network.config
>  /etc/config/fff
>  /etc/hoodfile
>  __EOF__



Mehr Informationen über die Mailingliste franken-dev