[PATCH] fff-network: Make CLIENT default status for one-/two-port devices

[Harald Thümmler]

reviewed-by: Harald Thuemmler <int at bnhof.de>



> The V2 firmware requires initialization of the WiFi interfaces
> by a hood file. If a one-port (or two-port) device is isolated,
> it won't get this information from other WiFi nodes (w2sta mode).
>
> In addition, it cannot be connected to the internet, as this would
> require the port to be in WAN mode. It is also not possible to
> connect a client device for configuration, since WiFi is not
> configured and the LAN port is in BATMAN mode.
>
> To enable configuration of an isolated one-port/two-port device,
> this patch thus changes the default port config to CLIENT, so
> the user can choose the desired configuration more easily.
>
> For two-port, we will have one port WAN and the second port
> CLIENT.
>
> Fixes #110
>
> Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> ---
>  src/packages/fff/fff-network/ar71xx/network.mode | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/src/packages/fff/fff-network/ar71xx/network.mode b/src/packages/fff/fff-network/ar71xx/network.mode
> index 09cd715f..f3a27939 100644
> --- a/src/packages/fff/fff-network/ar71xx/network.mode
> +++ b/src/packages/fff/fff-network/ar71xx/network.mode
> @@ -22,9 +22,9 @@
>  ## For example this is the case for: gl-ar150, tl-mr3020-v1, tl-wa850re-v1,
>  ## tl-wa860re-v1, tl-wa901nd-v2, ubnt-bullet-m, ubnt-loco-m-xw, ubnt-nano-m,
>  ## ubnt-unifi
> -ETHMODE="BATMAN"
> +ETHMODE="CLIENT"
>  ## Devices featuring 2 ethernet ports are configured by SPECIFIERs ressembling
>  ## the labels on the PORT itself. For the cpe210 these are called LAN0 and LAN1.
>  ## Therefore they are configured as follows:
>  LAN0MODE="WAN"
> -LAN1MODE="BATMAN"
> +LAN1MODE="CLIENT"