20180726-beta released
Adrian Schmutzler
mail at adrianschmutzler.de
Fr Jul 27 11:05:23 CEST 2018
ACK.
> -----Original Message-----
> From: franken-dev [mailto:franken-dev-bounces at freifunk.net] On Behalf Of
> Tim Niemeyer
> Sent: Freitag, 27. Juli 2018 10:56
> To: franken-dev at freifunk.net
> Subject: Re: 20180726-beta released
>
> Moin
>
> Habe das mit Absicht nur an die -dev geschickt. Wenn in ein paar Tagen
> ein paar Knoten laufen, können wir gern in die "öffentliche" Beta Phase
> gehen. Würde dann die Mail nochmal auf die große Liste schicken.
>
> Tim
>
> Am Freitag, den 27.07.2018, 10:52 +0200 schrieb Tim Niemeyer:
> > Hi
> >
> > Achtung:
> > Dies ist eine Beta-Version der Firmware. Diese Firmware gilt als
> > stabil, wurde aber noch nicht ausreichend getestet.
> >
> > Größte Änderungen auf einen Blick:
> >
> > Von 20180304-alpha zu 20180726-beta:
> > * KeyXchangeV2
> > ** Macnocker ist Teil der Firmware
> > ** Funkkanäle pro
> > Sektor NICHT mehr wählbar
> > ** Es werden nur noch authoritative Hoodfiles
> > geteilt
> > * Code-Cleanups
> > * Unifi AC fixes
> > * Data processing notes
> > * Update Tunneldigger (L2TPv3)
> >
> > Von 20180303-alpha zu 20180304-alpha:
> > * Firewall fix
> >
> > Von 20170918 zu 20180303-alpha:
> > * Batman Upgrade
> > * Mesh über 802.11s
> > * KeyXchangeV2
> > ** Hood übergreifende IPv6 ULA Adressen
> > ** Verbindungen zu dezentralen Hoods möglich
> > ** Funkkanäle pro Sektor wählbar
> > ** Eigene ESSID pro Hood
> > * 1043v5 Support
> > * Unifi AC Mesh Support
> >
> > Die Firmware befindet sich am üblichen Ort: [1]
> >
> > Das sysupgrade.sh funktioniert bei alpha Versionen nicht.
> >
> > Sollten euch Probleme bei der Benutzung der Firmware auffallen,
> > scheut
> > euch nicht diese Probleme in den Bug-Tracker [2] einzutragen. Dazu
> > einfach einen Account anlegen und einen neuen Eintrag erfassen.
> >
> > Ich bedanke mich für die vielen Beiträge und die super Diskussionen.
> > Unten, wie immer, das Shortlog.
> >
> > Tim
> >
> > 1: https://dev.freifunk-franken.de/firmware/20180726-beta/
> > 2: https://mantis.freifunk-franken.de
> >
> > --
> > Adrian Schmutzler (69):
> > fff-nodewatcher: Use mac address instead of standard node name
> > buildscript: Update LEDE and packages, use lede git mirror
> > Archer C25: Update qca9887 firmware to 10.2.4-1.0-00029
> > vpn-select: Use keyxchangev2data instead of fastd_fff_output
> > Remove references to community.cfg
> > fff-web: Show hood in public and internal web interface
> > Configure the Node a routable IPv6 ULA
> > fff-hoods: Fix fe80::1 for multiple configap interfaces
> > fff-hoods: Fix case of missing keyxchangev2data
> > Utilize PKG_NAME in Makefiles
> > Revert "Archer C25: Disable 5 GHz to provide working firmware"
> > buildscript: Fix typo
> > fff-hoods: Use channel provided by gateway
> > fff-hoods: Introduce sector files for custom settings
> > fff-hoods: Use variables for hood file names
> > fff-hoods: Use w5sta for download
> > fff-hoods: Fix missing commit for hood name
> > fff-network/fff-hoods: Create functions for IPv6 rewriting
> > CPE210: Fix ROUTERMAC
> > fff-web: Extend switch port assignment display in ports.html
> > fff-boardname: Reorganize WR841 boardnames
> > Add TL-WR1043N v5
> > fff-network: Fix mac adresses not set during merge/rebase
> > fff-hoods/fff-wireless: Don't delete WiFi devices
> > fff-hoods: Suppress warning for missing sectorfile
> > Support subtarget in buildscript
> > fff-web: Fix style and XHTML conformity in upgrade.html
> > show_info: Add assignment without switch
> > fff-web: Show WiFi channels and SSID
> > show_info: Display hood information
> > Rearrange fff config values into their own config file
> > fff-support: Update PoE passthrough code
> > fff-web: Added options to disable update notification
> > fff-web: Include new options into settings.html
> > fff-web/show_info: Put common code into function
> > fff-network: Fix second occurrence of ROUTERMAC and ETHMESHMAC
> > fff-web: Allow minus (-) in passwords
> > fff-network: Commit only network
> > configurehood: Wait for the config AP to build when in sta mode
> > configurehood: Prevent connecting two hoods
> > nodewatcher: Provide additional information about WiFi
> > interfaces
> > LEDE: Go back to OpenWRT sources
> > configurenetwork: Put One- and Two-Port pre-setup into function
> > fff-network/fff-hoods: Only use MAC address in network lib
> > fff-network: Calculate IPv6 using ROUTERMAC variable
> > nodewatcher: Fix bugs in gateway list creation
> > fff-hoods: Replace hiddenapflag by check for real conditions
> > fff-sysupgrade/fff-hoods: Make sectorfile upgradesafe
> > GL-AR150: Fix ETHMESHMAC
> > fff-hoods: Restart alfred after keyxchange file update
> > fff-nodewatcher: Add detailed clients data
> > nodewatcher: Provide data to calculate airtime
> > fff-web: Fix two bugs in wifiscan.html
> > configurehood: Improve conditions for configap setup
> > packages/fff: Split fff-hoods into two packages
> > fff-web: UPGRADE_PATH in header should be taken from hood file
> > configurehood: Fix "wifi" blocking correct network status
> > detection
> > alfred: Support interfaces IDs with more than two digits
> > Unifi AC: remove bs-partition ro-flag
> > configurenetwork: Improve output when setting IPv6 addresses
> > fff-batman-adv: Remove vis_mode from uci config
> > Data processing notes: Add in fff-web
> > Data processing notes: Add for SSH access
> > hood files: Use more meaningful and concise naming scheme
> > hood file: Use different files for www and for checksum
> > comparison
> > configurehood: Only provide hood file from GW/KeyXchange via
> > WWW
> > hood files: Move files from /www to /tmp and link there
> > configurehood: Don't remove timestamp for checksum comparison
> > nodewatcher: Change mechanism for client device detection
> >
> > Christian Dresel (7):
> > Update Batman to compat15
> > Reconfigure fff-wireless for keyxchangev2
> > Reconfigure vpn-select for keyxchangev2
> > Add fff-hoods
> > Add support for Unifi AC Mesh
> > fff-hoods: Make possible to use fixed hoodfile
> > Disable VPN if not in use
> >
> > Fabian Blaese (12):
> > Support batman-adv meshing over 802.11s
> > consistently use same webserver port for hoodfile on wifi and
> > lan
> > fff-network: evaluate macaddress in device config
> > Use SWITCHDEV variable for mac address fixing
> > configurehood: Allow for spaces after identifier
> > fff-network: Get MAC from wifi device instead of wifi network
> > CPE510: Add ROUTERMAC
> > Revert openwrt patch which caused too high tx powers
> > Move hoodfile acquisition into function
> > Allow initial configuration from Ethernet
> > Remove sectorfile for first release
> > Add batman-adv patch to remove gw mode switch message
> >
> > Robert Langhammer (7):
> > fff-hoods: fix sed to substitute timestamp
> > fastd: generate the key from urandom
> > Update tunneldigger
> > fff-network: correct path to iptables
> > Update tunneldigger
> > Remove double equals.
> > Remove double square bracket. [[ is a bash or ksh built-in, and
> > cannot be used in a #!/bin/sh script.
> >
> > Tim Niemeyer (14):
> > fff-hoods: only delete hiddenapfile if ap was configured
> > fff-hoods: move hiddenapfile variable
> > fff-alfred: new package
> > fff-alfred: do not use bat0 for master selection
> > WR841-v7: get routermac from phy0 instead of wlan0
> > bsp/default: move network sysctl's to fff-network
> > fff-network: move sysctl settings to a function
> > fff-firewall: clean up v6 rules on prepare
> > fff-network: rework sysctl's
> > fff-network: enable forwarding; filter forwarding
> > fff-macnock: new package
> > fff-hoods: set hood to none if on station mode
> > fff-hoods: call reload_config after uci commit
> > Revert "configurehood: Prevent connecting two hoods"
Mehr Informationen über die Mailingliste franken-dev