Kernel 4.4.92 und höher macht Unifi AC Mesh kaputt
mail at adrianschmutzler.de
mail at adrianschmutzler.de
Mi Jan 3 00:01:05 CET 2018
Hallo zusammen,
habe das gerade mal durchgetestet:
Das LEDE Kernel-Update auf 4.4.92 macht die Unifi AC Mesh kaputt, sodass
bat0 nicht mehr geht. Wenn ich Christian richtig verstanden habe, fehlt das
Kernel-Modul ganz?!
Habe den Commit direkt davor getestet:
https://github.com/lede-project/source/commit/e6fd17d04c7d738598414c55cd091f
7fb9c6567a
=> Läuft normal
Mit Kernel-Update:
https://github.com/lede-project/source/commit/fa0b5fce1f53c3520cacff49e9d371
fb2c5c3685
=> Läuft nicht
Ursprünglich hatte ich die aktuelle Version (Stand 2018-01-01, Kernel
4.4.108) verwendet:
https://github.com/lede-project/source/commit/473e99457156209bf37ab15b4b7f3e
d94b15dc0c
=> Läuft auch nicht, also wurde hier nichts zwischendurch gefixt
Betroffen ist nur das reine LEDE Patchlevel, nicht packages oder routing.
Auf einem WR841N v12 läuft die neue Version (2018-01-01) problemlos, ist
also spezifisch für die AC-Mesh?!
Mit etwas Glück gibt es jetzt nach dem OpenWRT Remerge auch mal wieder eine
neue Hauptversion, die dann Kernel 4.9 oder 4.14 hat. Vielleicht hilft
das... (oder alles wird schlimmer ;-))
Grüße
Adrian
> -----Original Message-----
> From: franken-dev [mailto:franken-dev-bounces at freifunk.net] On Behalf
> Of mail at adrianschmutzler.de
> Sent: Dienstag, 2. Januar 2018 20:55
> To: 'Christian Dresel' <fff at chrisi01.de>; franken-dev at freifunk.net
> Subject: RE: [PATCH] configurenetwork: Rearrangement/redesign of central
> commands
>
> Kann eigtl nur das Kernel-Update sein:
>
> https://github.com/openwrt/openwrt/commit/fa0b5fce1f53c3520cacff49e9
> d371fb2c5c3685
>
> Werde mal mit und ohne Testen.
>
> > -----Original Message-----
> > From: Christian Dresel [mailto:fff at chrisi01.de]
> > Sent: Dienstag, 2. Januar 2018 20:52
> > To: mail at adrianschmutzler.de; franken-dev at freifunk.net
> > Subject: Re: [PATCH] configurenetwork: Rearrangement/redesign of
> > central commands
> >
> >
> >
> > On 02.01.2018 20:49, mail at adrianschmutzler.de wrote:
> > > Ich hab routing gar nicht geupdatet, aber packages. Hast du packages
> > mitgezogen oder nicht?
> >
> > packages hab ich nicht mitgezogen, nur LEDE und Routing.
> >
> > demnach würde ich sagen, das Problem entsteht im LEDE irgendwo.
> >
> > >
> > >> -----Original Message-----
> > >> From: Christian Dresel [mailto:fff at chrisi01.de]
> > >> Sent: Dienstag, 2. Januar 2018 20:48
> > >> To: mail at adrianschmutzler.de
> > >> Subject: Re: [PATCH] configurenetwork: Rearrangement/redesign of
> > >> central commands
> > >>
> > >> hi
> > >>
> > >> On 02.01.2018 20:46, mail at adrianschmutzler.de wrote:
> > >>> Argh...
> > >>>
> > >>> Danke, da kann ich natürlich stundenlang an meiner Config
> > >>> rumschrauben,
> > >> wenn einfach das Modul fehlt. Wie mein Physik-Prof. halt immer
> > >> gesagt
> > hat:
> > >> Immer nur einen Parameter gleichzeitig ändern ....
> > >>>
> > >>> Du hast wirklich genau 17.01.4 genommen? Weil dann kann ich
> > >> einschränken, wo ich bei LEDE suchen muss...
> > >>
> > >> bei der LEDE Git Nummer bin ich mir sicher (ich erinner mich an die
> > >> drei 4er am Anfang) beim Routingfeed weiß ich es nicht exakt, es
> > >> war auf jeden Fall einer wo Batman 2017.3 drinnen ist aber noch
> > >> nicht Batman
> > >> 2017.4 (das hat nicht gebaut und beim build abgebrochen weil
> > >> irgendein C- Code kaputt war).
> > >>
> > >> P.S. die ML vergessen? Wann ja bitte wieder dort hin antworten,
> > >> interessiert bestimmt auch andere ;)
> > >>
> > >> mfg
> > >>
> > >> Christian
> > >>
> > >>>
> > >>> Grüße
> > >>>
> > >>> Adrian
> > >>>
> > >>>> -----Original Message-----
> > >>>> From: Christian Dresel [mailto:fff at chrisi01.de]
> > >>>> Sent: Dienstag, 2. Januar 2018 20:18
> > >>>> To: mail at adrianschmutzler.de; franken-dev at freifunk.net
> > >>>> Subject: Re: [PATCH] configurenetwork: Rearrangement/redesign of
> > >>>> central commands
> > >>>>
> > >>>> hi
> > >>>>
> > >>>> On 02.01.2018 20:05, mail at adrianschmutzler.de wrote:
> > >>>>> Tested successfully on WR841N v12.
> > >>>>> On ONEPORT (AC Mesh), bat0 is not coming up and thus br-mesh is
> > >>>> missing...
> > >>>>>
> > >>>>> Open issues:
> > >>>>> ...
> > >>>>> - Why is bat0 not coming up on AC Mesh? Help please...
> > >>>>
> > >>>> das ist mir gestern auch passiert. Ich hab nur unseren aktuellen
> > >>>> Master hergenommen und LEDE auf 17.01.4
> > >>>> (444add156f2a6d92fc15005c5ade2208a978966c) hochgezogen, sowie
> > den
> > >>>> Routingfeed auf 78049b46ac7cfbb14e8f05bc5150f518f827c0ec.
> > >>>>
> > >>>> Auch hier war nur eth0 und lo offen aber kein bat0, kein br-mesh
o.ä.
> > >>>> Ich hab nach langen suchen den Fehler nicht gefunden, wieder den
> > >>>> aktuellen Master gebaut und dann lief es wieder. Warum das
> > >>>> passiert,
> > >> keine Ahnung.
> > >>>> Es scheinen auch alle Kernelmodule zu fehlen (lsmod) ein wunder
> > >>>> das er überhaupt geht ;)
> > >>>>
> > >>>> Bei mir ebenfalls der AC Mesh.
> > >>>>
> > >>>> mfg
> > >>>>
> > >>>> Christian
> > >>>>
> > >>>>>
> > >>>>> Grüße
> > >>>>>
> > >>>>> Adrian
> > >>>>>
> > >>>>>> -----Original Message-----
> > >>>>>> From: franken-dev [mailto:franken-dev-bounces at freifunk.net]
> On
> > >>>> Behalf
> > >>>>>> Of Adrian Schmutzler
> > >>>>>> Sent: Dienstag, 2. Januar 2018 20:02
> > >>>>>> To: franken-dev at freifunk.net
> > >>>>>> Subject: [PATCH] configurenetwork: Rearrangement/redesign of
> > >>>>>> central commands
> > >>>>>>
> > >>>>>> This patch rearranges the commands in configurenetwork. The
> > >>>>>> main goal is
> > >>>>> to
> > >>>>>> avoid code duplications and make reading easier. Some "bugs"
> > >>>>>> were addressed on the way:
> > >>>>>> - Previously, ONEPORT devices went through both major blocks,
> > >>>>>> resulting e.g. in useless eth0.X interfaces being set up (and
> > >>>>>> perhaps lots of other strange things). Now, the routines for
> > >>>>>> ONEPORT and normal devices are separated.
> > >>>>>> - Updating the /etc/sysctl.conf has been combined to a single
> > >>>>>> block based on variables set earlier
> > >>>>>> - WANDEV is reset to WANDEV.2 were applicable to reduce
> number
> > of
> > >>>>>> ifs
> > >>>>>> - "uci del uci set" has been changed to "uci del"
> > >>>>>> - Spaces have been changed to Tabs were changes were done
> > >>>>>> - Arguments have been quoted in various places
> > >>>>>> - Double brackets have been replaced by single brackets
> > >>>>>> - ETHMODE if has been changed to use BATMAN as default (elseif
> > >>>>>> changed to else)
> > >>>>>> - Use ETHMESHMAC for ONEPORT, introduce ETHMESHDEV
> > >>>>>>
> > >>>>>> Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> > >>>>>>
> > >>>>>> ---
> > >>>>>>
> > >>>>>> This requires the patches to be applied BEFOREHAND:
> > >>>>>> fff-network: Introduce function to set MAC on device
> > >>>>>> fff-network: Replace ETH0MAC by replacement based on
> > ROUTERMAC
> > >>>>>>
> > >>>>>> Open issues:
> > >>>>>> - Line 84/89: eth0 MAC address is deleted (!). Why is this done
> > >>>>>> only in uci and is it desirable to have a device without MAC?
> > >>>>>> ---
> > >>>>>> .../fff-network/files/usr/sbin/configurenetwork | 155
> > >>>>> ++++++++++---------
> > >>>>>> --
> > >>>>>> 1 file changed, 70 insertions(+), 85 deletions(-)
> > >>>>>>
> > >>>>>> diff --git
> > >>>>>> a/src/packages/fff/fff-network/files/usr/sbin/configurenetwork
> > >>>>>> b/src/packages/fff/fff-network/files/usr/sbin/configurenetwork
> > >>>>>> index 0fbff10..ded9485 100755
> > >>>>>> ---
> > >>>>>> a/src/packages/fff/fff-network/files/usr/sbin/configurenetwork
> > >>>>>> +++ b/src/packages/fff/fff-network/files/usr/sbin/configurenetw
> > >>>>>> +++ or
> > >>>>>> +++ k
> > >>>>>> @@ -71,96 +71,81 @@ if [ -n "$LAN1PORT" ] ; then
> > >>>>>> setupPorts "$LAN1PORT" "${LAN1MODE}"
> > >>>>>> fi
> > >>>>>>
> > >>>>>> -if ! uci -q get network.$SWITCHDEV > /dev/null || [
> "$FORCEPARSE"
> > >>>>>> = '1' ]
> > >>>>> ;
> > >>>>>> then
> > >>>>>> -
> > >>>>>> - SWITCHHW=$(swconfig list | awk '{ print $4 }')
> > >>>>>> -
> > >>>>>> - uci set network.$SWITCHDEV=switch
> > >>>>>> - uci set network.$SWITCHDEV.name=$SWITCHHW
> > >>>>>> - uci set network.$SWITCHDEV.enable=1
> > >>>>>> - uci set network.$SWITCHDEV.reset=1
> > >>>>>> - uci set network.$SWITCHDEV.enable_vlan=1
> > >>>>>> -
> > >>>>>> - uci set network.${SWITCHDEV}_1=switch_vlan
> > >>>>>> - uci set network.${SWITCHDEV}_1.device=$SWITCHHW
> > >>>>>> - uci set network.${SWITCHDEV}_1.vlan=1
> > >>>>>> - uci set network.${SWITCHDEV}_1.ports="$CLIENT_PORTS"
> > >>>>>> -
> > >>>>>> - echo "# Allow IPv6 RAs on WAN Port" >> /etc/sysctl.conf
> > >>>>>> -
> > >>>>>> - if [[ "$WANDEV" = "$SWITCHDEV" ]] || ! [[ -z "$WAN_PORTS"
]];
> > >> then
> > >>>>>> - uci set network.${SWITCHDEV}_2=switch_vlan
> > >>>>>> - uci set network.${SWITCHDEV}_2.device=$SWITCHHW
> > >>>>>> - uci set network.${SWITCHDEV}_2.vlan=2
> > >>>>>> - uci set network.${SWITCHDEV}_2.ports="$WAN_PORTS"
> > >>>>>> -
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.2.accept_ra_defrtr = 1" >>
> > >>>>>> /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.2.accept_ra_pinfo = 1" >>
> > >>>>>> /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.2.autoconf = 1" >>
> > /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.2.accept_ra_rtr_pref = 1" >>
> > >>>>>> /etc/sysctl.conf
> > >>>>>> - else
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.accept_ra_defrtr = 1" >>
> > >>>>> /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.accept_ra_pinfo = 1" >>
> > >>>>> /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.autoconf = 1" >>
> > /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.accept_ra_rtr_pref = 1" >>
> > >>>>>> /etc/sysctl.conf
> > >>>>>> - fi
> > >>>>>> -
> > >>>>>> - uci set network.${SWITCHDEV}_3=switch_vlan
> > >>>>>> - uci set network.${SWITCHDEV}_3.device=$SWITCHHW
> > >>>>>> - uci set network.${SWITCHDEV}_3.vlan=3
> > >>>>>> - uci set network.${SWITCHDEV}_3.ports="$BATMAN_PORTS"
> > >>>>>> -
> > >>>>>> - uci set network.mesh.ifname="$SWITCHDEV.1 bat0"
> > >>>>>> -
> > >>>>>> - uci set network.ethmesh.ifname="$SWITCHDEV.3"
> > >>>>>> -
> > >>>>>> - if [[ "$WANDEV" = "$SWITCHDEV" ]]; then
> > >>>>>> - uci set network.wan.ifname=$WANDEV.2
> > >>>>>> - else
> > >>>>>> - uci set network.wan.ifname=$WANDEV
> > >>>>>> - fi
> > >>>>>> -
> > >>>>>> - uci commit network
> > >>>>>> +if [ "$ONE_PORT" = "YES" ] ; then
> > >>>>>> + if ! uci -q get "network.$SWITCHDEV.ifname" || [
> > "$FORCEPARSE"
> > >>>>>> +=
> > >>>>>> '1' ] ; then
> > >>>>>> + uci set "network.$SWITCHDEV=interface"
> > >>>>>> + uci set "network.$SWITCHDEV.ifname=$SWITCHDEV"
> > >>>>>> + wanon="0"
> > >>>>>> + if [ "$ETHMODE" = "WAN" ]; then
> > >>>>>> + wanon="1"
> > >>>>>> + uci set network.mesh.ifname="bat0"
> > >>>>>> + uci set network.wan.ifname="$WANDEV"
> > >>>>>> + uci del network.ethmesh.ifname
> > >>>>>> + uci del network.eth0.macaddr
> > >>>>>> + elif [ "$ETHMODE" = "CLIENT" ] ; then
> > >>>>>> + uci set network.mesh.ifname="bat0
> > $SWITCHDEV"
> > >>>>>> + uci set network.wan.ifname="eth1" #eth1
> > because it
> > >>>>>> is default in config file
> > >>>>>> + uci del network.ethmesh.ifname
> > >>>>>> + uci del network.eth0.macaddr
> > >>>>>> + else # default=BATMAN
> > >>>>>> + uci set network.mesh.ifname="bat0"
> > >>>>>> + uci set network.wan.ifname="eth1" #eth1
> > because it
> > >>>>>> is default in config file
> > >>>>>> + uci set
> > network.ethmesh.ifname="$SWITCHDEV"
> > >>>>>> + ETHMESHMAC="$(macFlipLocalBit
> > "$ROUTERMAC")"
> > >>>>>> + ETHMESHDEV="$SWITCHDEV"
> > >>>>>> + fi
> > >>>>>> + uci -q commit network
> > >>>>>> + fi
> > >>>>>> +else
> > >>>>>> + if ! uci -q get "network.$SWITCHDEV" > /dev/null || [
> > "$FORCEPARSE"
> > >>>>>> = '1' ] ; then
> > >>>>>> + SWITCHHW="$(swconfig list | awk '{ print $4 }')"
> > >>>>>> +
> > >>>>>> + uci set "network.$SWITCHDEV=switch"
> > >>>>>> + uci set "network.$SWITCHDEV.name=$SWITCHHW"
> > >>>>>> + uci set "network.$SWITCHDEV.enable=1"
> > >>>>>> + uci set "network.$SWITCHDEV.reset=1"
> > >>>>>> + uci set "network.$SWITCHDEV.enable_vlan=1"
> > >>>>>> +
> > >>>>>> + uci set "network.${SWITCHDEV}_1=switch_vlan"
> > >>>>>> + uci set
> > "network.${SWITCHDEV}_1.device=$SWITCHHW"
> > >>>>>> + uci set "network.${SWITCHDEV}_1.vlan=1"
> > >>>>>> + uci set
> > "network.${SWITCHDEV}_1.ports=$CLIENT_PORTS"
> > >>>>>> +
> > >>>>>> + echo "# Allow IPv6 RAs on WAN Port" >>
> > /etc/sysctl.conf
> > >>>>>> +
> > >>>>>> + wanon="1"
> > >>>>>> + if [ "$WANDEV" = "$SWITCHDEV" ] || [ -n
> > "$WAN_PORTS" ];
> > >>>>>> then
> > >>>>>> + WANDEV="${SWITCHDEV}.2"
> > >>>>>> + uci set
> > "network.${SWITCHDEV}_2=switch_vlan"
> > >>>>>> + uci set
> > >>>>>> "network.${SWITCHDEV}_2.device=$SWITCHHW"
> > >>>>>> + uci set "network.${SWITCHDEV}_2.vlan=2"
> > >>>>>> + uci set
> > >>>>>> "network.${SWITCHDEV}_2.ports=$WAN_PORTS"
> > >>>>>> + fi
> > >>>>>> +
> > >>>>>> + ETHMESHDEV="$SWITCHDEV.3"
> > >>>>>> + uci set "network.${SWITCHDEV}_3=switch_vlan"
> > >>>>>> + uci set
> > "network.${SWITCHDEV}_3.device=$SWITCHHW"
> > >>>>>> + uci set "network.${SWITCHDEV}_3.vlan=3"
> > >>>>>> + uci set
> > "network.${SWITCHDEV}_3.ports=$BATMAN_PORTS"
> > >>>>>> +
> > >>>>>> + uci set network.mesh.ifname="$SWITCHDEV.1 bat0"
> > >>>>>> + uci set network.wan.ifname="$WANDEV"
> > >>>>>> + uci set network.ethmesh.ifname="$ETHMESHDEV"
> > >>>>>> +
> > >>>>>> + uci -q commit network
> > >>>>>> + fi
> > >>>>>> fi
> > >>>>>> -
> > >>>>>> -if [ "$ONE_PORT" = "YES" ] && ( ! uci -q get
> > >>>>>> network.$SWITCHDEV.ifname || [ "$FORCEPARSE" = '1' ] ) ; then
> > >>>>>> - uci set network.$SWITCHDEV=interface
> > >>>>>> - uci set network.$SWITCHDEV.ifname=$SWITCHDEV
> > >>>>>> - if [ "$ETHMODE" = "WAN" ]; then
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.accept_ra_defrtr = 1" >>
> > >>>>> /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.accept_ra_pinfo = 1" >>
> > >>>>> /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.autoconf = 1" >>
> > /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.accept_ra_rtr_pref = 1" >>
> > >>>>>> /etc/sysctl.conf
> > >>>>>> - uci set network.mesh.ifname="bat0"
> > >>>>>> - uci set network.wan.ifname="$WANDEV"
> > >>>>>> - uci del uci set network.ethmesh.ifname
> > >>>>>> - uci del network.eth0.macaddr
> > >>>>>> - elif [ "$ETHMODE" = "CLIENT" ] ; then
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.accept_ra_defrtr = 0" >>
> > >>>>> /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.accept_ra_pinfo = 0" >>
> > >>>>> /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.autoconf = 0" >>
> > /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.accept_ra_rtr_pref = 0" >>
> > >>>>>> /etc/sysctl.conf
> > >>>>>> - uci set network.mesh.ifname="bat0 $SWITCHDEV"
> > >>>>>> - uci set network.wan.ifname="eth1" #eth1 because it is
> default
> > in
> > >>>>> config
> > >>>>>> file
> > >>>>>> - uci del network.ethmesh.ifname
> > >>>>>> - uci del network.eth0.macaddr
> > >>>>>> - elif [ "$ETHMODE" = "BATMAN" ] ; then
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.accept_ra_defrtr = 0" >>
> > >>>>> /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.accept_ra_pinfo = 0" >>
> > >>>>> /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.autoconf = 0" >>
> > /etc/sysctl.conf
> > >>>>>> - echo "net.ipv6.conf.$WANDEV.accept_ra_rtr_pref = 0" >>
> > >>>>>> /etc/sysctl.conf
> > >>>>>> - uci set network.mesh.ifname="bat0"
> > >>>>>> - uci set network.wan.ifname="eth1" #eth1 because it is
> default
> > in
> > >>>>> config
> > >>>>>> file
> > >>>>>> - uci set network.ethmesh.ifname="$SWITCHDEV"
> > >>>>>> - fixMac "$(macFlipLocalBit "$ROUTERMAC")" "eth0" "eth0"
"1"
> > >>>>>> - fi
> > >>>>>> - uci commit network
> > >>>>>> +if [ -n "$wanon" ]; then
> > >>>>>> + echo "net.ipv6.conf.$WANDEV.accept_ra_defrtr = $wanon"
> > >>
> > >>>>>> /etc/sysctl.conf
> > >>>>>> + echo "net.ipv6.conf.$WANDEV.accept_ra_pinfo = $wanon"
> > >>
> > >>>>>> /etc/sysctl.conf
> > >>>>>> + echo "net.ipv6.conf.$WANDEV.autoconf = $wanon" >>
> > >>>>>> /etc/sysctl.conf
> > >>>>>> + echo "net.ipv6.conf.$WANDEV.accept_ra_rtr_pref =
> > $wanon" >>
> > >>>>>> +/etc/sysctl.conf
> > >>>>>> fi
> > >>>>>>
> > >>>>>> /etc/init.d/network restart
> > >>>>>>
> > >>>>>> -if [ -n "$ETHMESHMAC" ]; then
> > >>>>>> - fixMac "$ETHMESHMAC" "${SWITCHDEV}.3" "ethmesh"
> > >>>>>> +if [ -n "$ETHMESHMAC" ] && [ -n "$ETHMESHDEV" ]; then
> > >>>>>> + fixMac "$ETHMESHMAC" "$ETHMESHDEV" "ethmesh"
> > >>>>>> fi
> > >>>>>>
> > >>>>>> if [ -n "$ROUTERMAC" ]; then
> > >>>>>> --
> > >>>>>> 2.7.4
> > >>>>>>
> > >>>>>> --
> > >>>>>> franken-dev mailing list
> > >>>>>> franken-dev at freifunk.net
> > >>>>>> http://lists.freifunk.net/mailman/listinfo/franken-dev-freifunk
> > >>>>>> .n
> > >>>>>> et
> > >>>>>
> > >>>
> > >>>
> > >
> > >
>
>
> --
> franken-dev mailing list
> franken-dev at freifunk.net
> http://lists.freifunk.net/mailman/listinfo/franken-dev-freifunk.net
Mehr Informationen über die Mailingliste franken-dev