AW: Firmware 20180802 released
Adrian Schmutzler
mail at adrianschmutzler.de
Mo Aug 6 09:33:32 CEST 2018
Hallo Marc,
das geht nicht. V1 und V2 sind in der Hinsicht komplett getrennt.
Du brauchst einen V2-Router, um auf einen anderen V2-Router zu kommen (solange keine eigenen Gateways im Spiel sind).
Grüße
Adrian
> -----Original Message-----
> From: franken-dev [mailto:franken-dev-bounces at freifunk.net] On Behalf Of
> Marc Schenk
> Sent: Montag, 6. August 2018 07:01
> To: Christian Dresel <fff at chrisi01.de>; franken-dev at freifunk.net; 'Freifunk
> Franken' <franken at freifunk.net>
> Subject: Re: AW: Firmware 20180802 released
>
> Hallo Christian, Hallo zusammen,
>
> Danke für die Hinweise.
> Ich wollte von einem Router aus Hood Arnstein V1 auf meinen frischen Router
> in Schweinfurt V2.
>
> Nach einer Mail heute morgen hier in Thread bin ich mir allerdings gar
> nicht mehr sicher, ob das überhaupt geht.
>
> Traceroute kann ich heute Nachmittag/Abend nachlegen.
>
> Vielen Dank nochmal für die Unterstützung
>
> Gruß
> Marc
>
>
>
> Am 5. August 2018 18:35:56 schrieb Christian Dresel <fff at chrisi01.de>:
>
> > hi
> >
> > On 05.08.2018 18:04, Marc Schenk wrote:
> >> Hallo liebe Firmwarebauer,
> >>
> >> habe bei einem meiner Knoten das Release gezogen. Das Upgrade hat auch
> sehr
> >> gut funktioniert (841 V10).
> >> Mit der V2 funktioniert ja laut Wiki der Zugriff Hoodübergreifend, richtig?
> >> Das habe ich mittels der fd43*** auch probiert, scheitere aber. Verbinde
> >> ich mich in die Hood des V2 Knotens, dann klappt der Zugriff.
> >
> > bitte genau angeben von welcher Hood in welche Hood du willst, dazu am
> > besten noch ein traceroute dazu anhängen. Da das ganze über die
> > Gatewayserver geroutet wird und das noch viel Neuland ist, können da
> > durchaus Fehler drinnen sein. Mit einem Traceroute sollte man aber
> > hoffentlich erkennen woran es scheitert.
> >
> > mfg
> >
> > Christian
> >
> >> Hat jemand eine Idee, was das sein könnte, oder habe ich etwas falsch
> >> gelesen oder interpretiert?
> >>
> >> Danke für die Antworten.
> >>
> >> Gruß
> >>
> >> Marc
> >>
> >>> -----Ursprüngliche Nachricht-----
> >>> Von: franken <franken-bounces at freifunk.net> Im Auftrag von Tim
> >>> Niemeyer
> >>> Gesendet: Sonntag, 5. August 2018 15:32
> >>> An: franken-dev at freifunk.net; franken at freifunk.net
> >>> Betreff: Firmware 20180802 released
> >>>
> >>> Hi
> >>>
> >>> Nun ist es endlich soweit. Die Firmware in der Version 20180802 ist
> released.
> >>> Dies ist die erste Firmware, welche das sogenannte "V2"
> >>> implementiert.
> >>>
> >>> Macht euch vor den Update bitte einen Überblick, was "V2" für eure
> >>> Installationen bedeutet. Dies kann man anhand der sehr gut gelungenen
> >>> Dokumentation im Wiki machen:
> >>> https://wiki.freifunk-franken.de/w/KeyXchangeV2
> >>>
> >>> Beachtet bitte insbesondere den Abschnitt zum Upgrade von Freifunk
> >>> Knoten:
> >>> https://wiki.freifunk-
> >>>
> franken.de/w/KeyXchangeV2#Gefahren_eines_Updates_vom_alten_Syste
> >>> m
> >>>
> >>> Größte Änderungen auf einen Blick seit 20170918:
> >>> * Code-Cleanups
> >>> * Data processing notes
> >>> * Update Tunneldigger (L2TPv3)
> >>> * Batman Upgrade
> >>> * Mesh über 802.11s
> >>> * KeyXchangeV2
> >>> ** Hood übergreifende IPv6 ULA Adressen
> >>> ** Verbindungen zu dezentralen Hoods möglich
> >>> ** Eigene ESSID pro Hood
> >>> ** Macnocker ist Teil der Firmware
> >>> ** Config-AP eingeführt
> >>> * 1043v5 Support
> >>> * Unifi AC Mesh Support
> >>>
> >>> Die Firmware befindet sich am üblichen Ort:
> >>> https://dev.freifunk-franken.de/firmware/20180802/
> >>>
> >>> Sollten euch Probleme bei der Benutzung der Firmware auffallen, scheut
> >>> euch nicht diese Probleme in den Bug-Tracker einzutragen. Dazu einfach
> >>> einen Account anlegen und einen neuen Eintrag erfassen:
> >>> https://mantis.freifunk-franken.de
> >>>
> >>> Ich bedanke mich für die vielen Beiträge und die super Diskussionen.
> >>>
> >>> Unten, wie immer, das Shortlog.
> >>>
> >>> Tim
> >>>
> >>> --
> >>> Adrian Schmutzler (70):
> >>> fff-nodewatcher: Use mac address instead of standard node name
> >>> buildscript: Update LEDE and packages, use lede git mirror
> >>> Archer C25: Update qca9887 firmware to 10.2.4-1.0-00029
> >>> vpn-select: Use keyxchangev2data instead of fastd_fff_output
> >>> Remove references to community.cfg
> >>> fff-web: Show hood in public and internal web interface
> >>> Configure the Node a routable IPv6 ULA
> >>> fff-hoods: Fix fe80::1 for multiple configap interfaces
> >>> fff-hoods: Fix case of missing keyxchangev2data
> >>> Utilize PKG_NAME in Makefiles
> >>> Revert "Archer C25: Disable 5 GHz to provide working firmware"
> >>> buildscript: Fix typo
> >>> fff-hoods: Use channel provided by gateway
> >>> fff-hoods: Introduce sector files for custom settings
> >>> fff-hoods: Use variables for hood file names
> >>> fff-hoods: Use w5sta for download
> >>> fff-hoods: Fix missing commit for hood name
> >>> fff-network/fff-hoods: Create functions for IPv6 rewriting
> >>> CPE210: Fix ROUTERMAC
> >>> fff-web: Extend switch port assignment display in ports.html
> >>> fff-boardname: Reorganize WR841 boardnames
> >>> Add TL-WR1043N v5
> >>> fff-network: Fix mac adresses not set during merge/rebase
> >>> fff-hoods/fff-wireless: Don't delete WiFi devices
> >>> fff-hoods: Suppress warning for missing sectorfile
> >>> Support subtarget in buildscript
> >>> fff-web: Fix style and XHTML conformity in upgrade.html
> >>> show_info: Add assignment without switch
> >>> fff-web: Show WiFi channels and SSID
> >>> show_info: Display hood information
> >>> Rearrange fff config values into their own config file
> >>> fff-support: Update PoE passthrough code
> >>> fff-web: Added options to disable update notification
> >>> fff-web: Include new options into settings.html
> >>> fff-web/show_info: Put common code into function
> >>> fff-network: Fix second occurrence of ROUTERMAC and ETHMESHMAC
> >>> fff-web: Allow minus (-) in passwords
> >>> fff-network: Commit only network
> >>> configurehood: Wait for the config AP to build when in sta mode
> >>> configurehood: Prevent connecting two hoods
> >>> nodewatcher: Provide additional information about WiFi interfaces
> >>> LEDE: Go back to OpenWRT sources
> >>> configurenetwork: Put One- and Two-Port pre-setup into function
> >>> fff-network/fff-hoods: Only use MAC address in network lib
> >>> fff-network: Calculate IPv6 using ROUTERMAC variable
> >>> nodewatcher: Fix bugs in gateway list creation
> >>> fff-hoods: Replace hiddenapflag by check for real conditions
> >>> fff-sysupgrade/fff-hoods: Make sectorfile upgradesafe
> >>> GL-AR150: Fix ETHMESHMAC
> >>> fff-hoods: Restart alfred after keyxchange file update
> >>> fff-nodewatcher: Add detailed clients data
> >>> nodewatcher: Provide data to calculate airtime
> >>> fff-web: Fix two bugs in wifiscan.html
> >>> configurehood: Improve conditions for configap setup
> >>> packages/fff: Split fff-hoods into two packages
> >>> fff-web: UPGRADE_PATH in header should be taken from hood file
> >>> configurehood: Fix "wifi" blocking correct network status detection
> >>> alfred: Support interfaces IDs with more than two digits
> >>> Unifi AC: remove bs-partition ro-flag
> >>> configurenetwork: Improve output when setting IPv6 addresses
> >>> fff-batman-adv: Remove vis_mode from uci config
> >>> Data processing notes: Add in fff-web
> >>> Data processing notes: Add for SSH access
> >>> hood files: Use more meaningful and concise naming scheme
> >>> hood file: Use different files for www and for checksum comparison
> >>> configurehood: Only provide hood file from GW/KeyXchange via WWW
> >>> hood files: Move files from /www to /tmp and link there
> >>> configurehood: Don't remove timestamp for checksum comparison
> >>> nodewatcher: Change mechanism for client device detection
> >>> vpn-select: Demand hood file to be provided as argument
> >>>
> >>> Christian Dresel (7):
> >>> Update Batman to compat15
> >>> Reconfigure fff-wireless for keyxchangev2
> >>> Reconfigure vpn-select for keyxchangev2
> >>> Add fff-hoods
> >>> Add support for Unifi AC Mesh
> >>> fff-hoods: Make possible to use fixed hoodfile
> >>> Disable VPN if not in use
> >>>
> >>> Fabian Blaese (12):
> >>> Support batman-adv meshing over 802.11s
> >>> consistently use same webserver port for hoodfile on wifi and lan
> >>> fff-network: evaluate macaddress in device config
> >>> Use SWITCHDEV variable for mac address fixing
> >>> configurehood: Allow for spaces after identifier
> >>> fff-network: Get MAC from wifi device instead of wifi network
> >>> CPE510: Add ROUTERMAC
> >>> Revert openwrt patch which caused too high tx powers
> >>> Move hoodfile acquisition into function
> >>> Allow initial configuration from Ethernet
> >>> Remove sectorfile for first release
> >>> Add batman-adv patch to remove gw mode switch message
> >>>
> >>> Robert Langhammer (7):
> >>> fff-hoods: fix sed to substitute timestamp
> >>> fastd: generate the key from urandom
> >>> Update tunneldigger
> >>> fff-network: correct path to iptables
> >>> Update tunneldigger
> >>> Remove double equals.
> >>> Remove double square bracket. [[ is a bash or ksh built-in, and cannot be
> >>> used in a #!/bin/sh script.
> >>>
> >>> Tim Niemeyer (14):
> >>> fff-hoods: only delete hiddenapfile if ap was configured
> >>> fff-hoods: move hiddenapfile variable
> >>> fff-alfred: new package
> >>> fff-alfred: do not use bat0 for master selection
> >>> WR841-v7: get routermac from phy0 instead of wlan0
> >>> bsp/default: move network sysctl's to fff-network
> >>> fff-network: move sysctl settings to a function
> >>> fff-firewall: clean up v6 rules on prepare
> >>> fff-network: rework sysctl's
> >>> fff-network: enable forwarding; filter forwarding
> >>> fff-macnock: new package
> >>> fff-hoods: set hood to none if on station mode
> >>> fff-hoods: call reload_config after uci commit
> >>> Revert "configurehood: Prevent connecting two hoods"
> >>
>
>
Mehr Informationen über die Mailingliste franken-dev