Firmware 20180802 released

mail at adrianschmutzler.de mail at adrianschmutzler.de
So Aug 5 23:45:54 CEST 2018


Ich sehe gerade, SchweinfurtV2, das war ich mit Hof ja echt falsch.

Da sollte das eigtl. funktionieren, bitte ggf. traceroutes schicken wie vorgeschlagen.

> -----Original Message-----
> From: franken-dev [mailto:franken-dev-bounces at freifunk.net] On Behalf
> Of Marc Schenk
> Sent: Sonntag, 5. August 2018 18:04
> To: 'Freifunk Franken' <franken at freifunk.net>; franken-dev at freifunk.net
> Subject: AW: Firmware 20180802 released
> 
> Hallo liebe Firmwarebauer,
> 
> habe bei einem meiner Knoten das Release gezogen. Das Upgrade hat auch
> sehr gut funktioniert (841 V10).
> Mit der V2 funktioniert ja laut Wiki der Zugriff Hoodübergreifend, richtig?
> Das habe ich mittels der fd43*** auch probiert, scheitere aber. Verbinde ich
> mich in die Hood des V2 Knotens, dann klappt der Zugriff.
> Hat jemand eine Idee, was das sein könnte, oder habe ich etwas falsch
> gelesen oder interpretiert?
> 
> Danke für die Antworten.
> 
> Gruß
> 
> Marc
> 
> > -----Ursprüngliche Nachricht-----
> > Von: franken <franken-bounces at freifunk.net> Im Auftrag von Tim
> > Niemeyer
> > Gesendet: Sonntag, 5. August 2018 15:32
> > An: franken-dev at freifunk.net; franken at freifunk.net
> > Betreff: Firmware 20180802 released
> >
> > Hi
> >
> > Nun ist es endlich soweit. Die Firmware in der Version 20180802 ist
> released.
> > Dies ist die erste Firmware, welche das sogenannte "V2"
> > implementiert.
> >
> > Macht euch vor den Update bitte einen Überblick, was "V2" für eure
> > Installationen bedeutet. Dies kann man anhand der sehr gut gelungenen
> > Dokumentation im Wiki machen:
> > https://wiki.freifunk-franken.de/w/KeyXchangeV2
> >
> > Beachtet bitte insbesondere den Abschnitt zum Upgrade von Freifunk
> > Knoten:
> > https://wiki.freifunk-
> >
> franken.de/w/KeyXchangeV2#Gefahren_eines_Updates_vom_alten_Syste
> > m
> >
> > Größte Änderungen auf einen Blick seit 20170918:
> > * Code-Cleanups
> > * Data processing notes
> > * Update Tunneldigger (L2TPv3)
> > * Batman Upgrade
> > * Mesh über 802.11s
> > * KeyXchangeV2
> > ** Hood übergreifende IPv6 ULA Adressen
> > ** Verbindungen zu dezentralen Hoods möglich
> > ** Eigene ESSID pro Hood
> > ** Macnocker ist Teil der Firmware
> > ** Config-AP eingeführt
> > * 1043v5 Support
> > * Unifi AC Mesh Support
> >
> > Die Firmware befindet sich am üblichen Ort:
> > https://dev.freifunk-franken.de/firmware/20180802/
> >
> > Sollten euch Probleme bei der Benutzung der Firmware auffallen, scheut
> > euch nicht diese Probleme in den Bug-Tracker einzutragen. Dazu einfach
> > einen Account anlegen und einen neuen Eintrag erfassen:
> > https://mantis.freifunk-franken.de
> >
> > Ich bedanke mich für die vielen Beiträge und die super Diskussionen.
> >
> > Unten, wie immer, das Shortlog.
> >
> > Tim
> >
> > --
> > Adrian Schmutzler (70):
> >       fff-nodewatcher: Use mac address instead of standard node name
> >       buildscript: Update LEDE and packages, use lede git mirror
> >       Archer C25: Update qca9887 firmware to 10.2.4-1.0-00029
> >       vpn-select: Use keyxchangev2data instead of fastd_fff_output
> >       Remove references to community.cfg
> >       fff-web: Show hood in public and internal web interface
> >       Configure the Node a routable IPv6 ULA
> >       fff-hoods: Fix fe80::1 for multiple configap interfaces
> >       fff-hoods: Fix case of missing keyxchangev2data
> >       Utilize PKG_NAME in Makefiles
> >       Revert "Archer C25: Disable 5 GHz to provide working firmware"
> >       buildscript: Fix typo
> >       fff-hoods: Use channel provided by gateway
> >       fff-hoods: Introduce sector files for custom settings
> >       fff-hoods: Use variables for hood file names
> >       fff-hoods: Use w5sta for download
> >       fff-hoods: Fix missing commit for hood name
> >       fff-network/fff-hoods: Create functions for IPv6 rewriting
> >       CPE210: Fix ROUTERMAC
> >       fff-web: Extend switch port assignment display in ports.html
> >       fff-boardname: Reorganize WR841 boardnames
> >       Add TL-WR1043N v5
> >       fff-network: Fix mac adresses not set during merge/rebase
> >       fff-hoods/fff-wireless: Don't delete WiFi devices
> >       fff-hoods: Suppress warning for missing sectorfile
> >       Support subtarget in buildscript
> >       fff-web: Fix style and XHTML conformity in upgrade.html
> >       show_info: Add assignment without switch
> >       fff-web: Show WiFi channels and SSID
> >       show_info: Display hood information
> >       Rearrange fff config values into their own config file
> >       fff-support: Update PoE passthrough code
> >       fff-web: Added options to disable update notification
> >       fff-web: Include new options into settings.html
> >       fff-web/show_info: Put common code into function
> >       fff-network: Fix second occurrence of ROUTERMAC and ETHMESHMAC
> >       fff-web: Allow minus (-) in passwords
> >       fff-network: Commit only network
> >       configurehood: Wait for the config AP to build when in sta mode
> >       configurehood: Prevent connecting two hoods
> >       nodewatcher: Provide additional information about WiFi interfaces
> >       LEDE: Go back to OpenWRT sources
> >       configurenetwork: Put One- and Two-Port pre-setup into function
> >       fff-network/fff-hoods: Only use MAC address in network lib
> >       fff-network: Calculate IPv6 using ROUTERMAC variable
> >       nodewatcher: Fix bugs in gateway list creation
> >       fff-hoods: Replace hiddenapflag by check for real conditions
> >       fff-sysupgrade/fff-hoods: Make sectorfile upgradesafe
> >       GL-AR150: Fix ETHMESHMAC
> >       fff-hoods: Restart alfred after keyxchange file update
> >       fff-nodewatcher: Add detailed clients data
> >       nodewatcher: Provide data to calculate airtime
> >       fff-web: Fix two bugs in wifiscan.html
> >       configurehood: Improve conditions for configap setup
> >       packages/fff: Split fff-hoods into two packages
> >       fff-web: UPGRADE_PATH in header should be taken from hood file
> >       configurehood: Fix "wifi" blocking correct network status detection
> >       alfred: Support interfaces IDs with more than two digits
> >       Unifi AC: remove bs-partition ro-flag
> >       configurenetwork: Improve output when setting IPv6 addresses
> >       fff-batman-adv: Remove vis_mode from uci config
> >       Data processing notes: Add in fff-web
> >       Data processing notes: Add for SSH access
> >       hood files: Use more meaningful and concise naming scheme
> >       hood file: Use different files for www and for checksum comparison
> >       configurehood: Only provide hood file from GW/KeyXchange via WWW
> >       hood files: Move files from /www to /tmp and link there
> >       configurehood: Don't remove timestamp for checksum comparison
> >       nodewatcher: Change mechanism for client device detection
> >       vpn-select: Demand hood file to be provided as argument
> >
> > Christian Dresel (7):
> >       Update Batman to compat15
> >       Reconfigure fff-wireless for keyxchangev2
> >       Reconfigure vpn-select for keyxchangev2
> >       Add fff-hoods
> >       Add support for Unifi AC Mesh
> >       fff-hoods: Make possible to use fixed hoodfile
> >       Disable VPN if not in use
> >
> > Fabian Blaese (12):
> >       Support batman-adv meshing over 802.11s
> >       consistently use same webserver port for hoodfile on wifi and lan
> >       fff-network: evaluate macaddress in device config
> >       Use SWITCHDEV variable for mac address fixing
> >       configurehood: Allow for spaces after identifier
> >       fff-network: Get MAC from wifi device instead of wifi network
> >       CPE510: Add ROUTERMAC
> >       Revert openwrt patch which caused too high tx powers
> >       Move hoodfile acquisition into function
> >       Allow initial configuration from Ethernet
> >       Remove sectorfile for first release
> >       Add batman-adv patch to remove gw mode switch message
> >
> > Robert Langhammer (7):
> >       fff-hoods: fix sed to substitute timestamp
> >       fastd: generate the key from urandom
> >       Update tunneldigger
> >       fff-network: correct path to iptables
> >       Update tunneldigger
> >       Remove double equals.
> >       Remove double square bracket. [[ is a bash or ksh built-in, and
> > cannot be used in a #!/bin/sh script.
> >
> > Tim Niemeyer (14):
> >       fff-hoods: only delete hiddenapfile if ap was configured
> >       fff-hoods: move hiddenapfile variable
> >       fff-alfred: new package
> >       fff-alfred: do not use bat0 for master selection
> >       WR841-v7: get routermac from phy0 instead of wlan0
> >       bsp/default: move network sysctl's to fff-network
> >       fff-network: move sysctl settings to a function
> >       fff-firewall: clean up v6 rules on prepare
> >       fff-network: rework sysctl's
> >       fff-network: enable forwarding; filter forwarding
> >       fff-macnock: new package
> >       fff-hoods: set hood to none if on station mode
> >       fff-hoods: call reload_config after uci commit
> >       Revert "configurehood: Prevent connecting two hoods"




Mehr Informationen über die Mailingliste franken-dev