Firmware 20180802 released

[Christian Dresel]

hi

On 05.08.2018 15:55, Alex Gutfried wrote:
> Super!!
> Herzlichen Dank an alle Entwickler, die jetzt wirklich lange an der
> neuen V2 getüftelt, geschraubt und gedreht haben. :)
> 
> Ist was geiles entstanden. :)
> 
> *Damen-Hoch* :)

bin Singel, keine Dame hier ansonsten schließe ich mich an :)

mfg

Christian

> 
> Tim Niemeyer <tim at tn-x.org <mailto:tim at tn-x.org>> schrieb am So., 5.
> Aug. 2018, 15:32:
> 
>     Hi
> 
>     Nun ist es endlich soweit. Die Firmware in der Version 20180802 ist
>     released. Dies ist die erste Firmware, welche das sogenannte "V2"
>     implementiert.
> 
>     Macht euch vor den Update bitte einen Überblick, was "V2" für eure
>     Installationen bedeutet. Dies kann man anhand der sehr gut gelungenen
>     Dokumentation im Wiki machen:
>     https://wiki.freifunk-franken.de/w/KeyXchangeV2
> 
>     Beachtet bitte insbesondere den Abschnitt zum Upgrade von Freifunk
>     Knoten:
>     https://wiki.freifunk-franken.de/w/KeyXchangeV2#Gefahren_eines_Updates_vom_alten_System
> 
>     Größte Änderungen auf einen Blick seit 20170918:
>     * Code-Cleanups
>     * Data processing notes
>     * Update Tunneldigger (L2TPv3)
>     * Batman Upgrade
>     * Mesh über 802.11s
>     * KeyXchangeV2
>     ** Hood übergreifende IPv6 ULA Adressen
>     ** Verbindungen zu dezentralen Hoods möglich
>     ** Eigene ESSID pro Hood
>     ** Macnocker ist Teil der Firmware
>     ** Config-AP eingeführt
>     * 1043v5 Support
>     * Unifi AC Mesh Support
> 
>     Die Firmware befindet sich am üblichen Ort:
>     https://dev.freifunk-franken.de/firmware/20180802/
> 
>     Sollten euch Probleme bei der Benutzung der Firmware auffallen, scheut
>     euch nicht diese Probleme in den Bug-Tracker einzutragen. Dazu
>     einfach einen Account anlegen und einen neuen Eintrag erfassen:
>     https://mantis.freifunk-franken.de
> 
>     Ich bedanke mich für die vielen Beiträge und die super Diskussionen.
> 
>     Unten, wie immer, das Shortlog.
> 
>     Tim
> 
>     --
>     Adrian Schmutzler (70):
>           fff-nodewatcher: Use mac address instead of standard node name
>           buildscript: Update LEDE and packages, use lede git mirror
>           Archer C25: Update qca9887 firmware to 10.2.4-1.0-00029
>           vpn-select: Use keyxchangev2data instead of fastd_fff_output
>           Remove references to community.cfg
>           fff-web: Show hood in public and internal web interface
>           Configure the Node a routable IPv6 ULA
>           fff-hoods: Fix fe80::1 for multiple configap interfaces
>           fff-hoods: Fix case of missing keyxchangev2data
>           Utilize PKG_NAME in Makefiles
>           Revert "Archer C25: Disable 5 GHz to provide working firmware"
>           buildscript: Fix typo
>           fff-hoods: Use channel provided by gateway
>           fff-hoods: Introduce sector files for custom settings
>           fff-hoods: Use variables for hood file names
>           fff-hoods: Use w5sta for download
>           fff-hoods: Fix missing commit for hood name
>           fff-network/fff-hoods: Create functions for IPv6 rewriting
>           CPE210: Fix ROUTERMAC
>           fff-web: Extend switch port assignment display in ports.html
>           fff-boardname: Reorganize WR841 boardnames
>           Add TL-WR1043N v5
>           fff-network: Fix mac adresses not set during merge/rebase
>           fff-hoods/fff-wireless: Don't delete WiFi devices
>           fff-hoods: Suppress warning for missing sectorfile
>           Support subtarget in buildscript
>           fff-web: Fix style and XHTML conformity in upgrade.html
>           show_info: Add assignment without switch
>           fff-web: Show WiFi channels and SSID
>           show_info: Display hood information
>           Rearrange fff config values into their own config file
>           fff-support: Update PoE passthrough code
>           fff-web: Added options to disable update notification
>           fff-web: Include new options into settings.html
>           fff-web/show_info: Put common code into function
>           fff-network: Fix second occurrence of ROUTERMAC and ETHMESHMAC
>           fff-web: Allow minus (-) in passwords
>           fff-network: Commit only network
>           configurehood: Wait for the config AP to build when in sta mode
>           configurehood: Prevent connecting two hoods
>           nodewatcher: Provide additional information about WiFi interfaces
>           LEDE: Go back to OpenWRT sources
>           configurenetwork: Put One- and Two-Port pre-setup into function
>           fff-network/fff-hoods: Only use MAC address in network lib
>           fff-network: Calculate IPv6 using ROUTERMAC variable
>           nodewatcher: Fix bugs in gateway list creation
>           fff-hoods: Replace hiddenapflag by check for real conditions
>           fff-sysupgrade/fff-hoods: Make sectorfile upgradesafe
>           GL-AR150: Fix ETHMESHMAC
>           fff-hoods: Restart alfred after keyxchange file update
>           fff-nodewatcher: Add detailed clients data
>           nodewatcher: Provide data to calculate airtime
>           fff-web: Fix two bugs in wifiscan.html
>           configurehood: Improve conditions for configap setup
>           packages/fff: Split fff-hoods into two packages
>           fff-web: UPGRADE_PATH in header should be taken from hood file
>           configurehood: Fix "wifi" blocking correct network status
>     detection
>           alfred: Support interfaces IDs with more than two digits
>           Unifi AC: remove bs-partition ro-flag
>           configurenetwork: Improve output when setting IPv6 addresses
>           fff-batman-adv: Remove vis_mode from uci config
>           Data processing notes: Add in fff-web
>           Data processing notes: Add for SSH access
>           hood files: Use more meaningful and concise naming scheme
>           hood file: Use different files for www and for checksum
>     comparison
>           configurehood: Only provide hood file from GW/KeyXchange via WWW
>           hood files: Move files from /www to /tmp and link there
>           configurehood: Don't remove timestamp for checksum comparison
>           nodewatcher: Change mechanism for client device detection
>           vpn-select: Demand hood file to be provided as argument
> 
>     Christian Dresel (7):
>           Update Batman to compat15
>           Reconfigure fff-wireless for keyxchangev2
>           Reconfigure vpn-select for keyxchangev2
>           Add fff-hoods
>           Add support for Unifi AC Mesh
>           fff-hoods: Make possible to use fixed hoodfile
>           Disable VPN if not in use
> 
>     Fabian Blaese (12):
>           Support batman-adv meshing over 802.11s
>           consistently use same webserver port for hoodfile on wifi and lan
>           fff-network: evaluate macaddress in device config
>           Use SWITCHDEV variable for mac address fixing
>           configurehood: Allow for spaces after identifier
>           fff-network: Get MAC from wifi device instead of wifi network
>           CPE510: Add ROUTERMAC
>           Revert openwrt patch which caused too high tx powers
>           Move hoodfile acquisition into function
>           Allow initial configuration from Ethernet
>           Remove sectorfile for first release
>           Add batman-adv patch to remove gw mode switch message
> 
>     Robert Langhammer (7):
>           fff-hoods: fix sed to substitute timestamp
>           fastd: generate the key from urandom
>           Update tunneldigger
>           fff-network: correct path to iptables
>           Update tunneldigger
>           Remove double equals.
>           Remove double square bracket. [[ is a bash or ksh built-in, and
>     cannot be used in a #!/bin/sh script.
> 
>     Tim Niemeyer (14):
>           fff-hoods: only delete hiddenapfile if ap was configured
>           fff-hoods: move hiddenapfile variable
>           fff-alfred: new package
>           fff-alfred: do not use bat0 for master selection
>           WR841-v7: get routermac from phy0 instead of wlan0
>           bsp/default: move network sysctl's to fff-network
>           fff-network: move sysctl settings to a function
>           fff-firewall: clean up v6 rules on prepare
>           fff-network: rework sysctl's
>           fff-network: enable forwarding; filter forwarding
>           fff-macnock: new package
>           fff-hoods: set hood to none if on station mode
>           fff-hoods: call reload_config after uci commit
>           Revert "configurehood: Prevent connecting two hoods"
>