Firmware 20180802 released
Alex Gutfried
alexgutfried at gmail.com
So Aug 5 15:55:37 CEST 2018
Super!!
Herzlichen Dank an alle Entwickler, die jetzt wirklich lange an der neuen
V2 getüftelt, geschraubt und gedreht haben. :)
Ist was geiles entstanden. :)
*Damen-Hoch* :)
Tim Niemeyer <tim at tn-x.org> schrieb am So., 5. Aug. 2018, 15:32:
> Hi
>
> Nun ist es endlich soweit. Die Firmware in der Version 20180802 ist
> released. Dies ist die erste Firmware, welche das sogenannte "V2"
> implementiert.
>
> Macht euch vor den Update bitte einen Überblick, was "V2" für eure
> Installationen bedeutet. Dies kann man anhand der sehr gut gelungenen
> Dokumentation im Wiki machen:
> https://wiki.freifunk-franken.de/w/KeyXchangeV2
>
> Beachtet bitte insbesondere den Abschnitt zum Upgrade von Freifunk
> Knoten:
>
> https://wiki.freifunk-franken.de/w/KeyXchangeV2#Gefahren_eines_Updates_vom_alten_System
>
> Größte Änderungen auf einen Blick seit 20170918:
> * Code-Cleanups
> * Data processing notes
> * Update Tunneldigger (L2TPv3)
> * Batman Upgrade
> * Mesh über 802.11s
> * KeyXchangeV2
> ** Hood übergreifende IPv6 ULA Adressen
> ** Verbindungen zu dezentralen Hoods möglich
> ** Eigene ESSID pro Hood
> ** Macnocker ist Teil der Firmware
> ** Config-AP eingeführt
> * 1043v5 Support
> * Unifi AC Mesh Support
>
> Die Firmware befindet sich am üblichen Ort:
> https://dev.freifunk-franken.de/firmware/20180802/
>
> Sollten euch Probleme bei der Benutzung der Firmware auffallen, scheut
> euch nicht diese Probleme in den Bug-Tracker einzutragen. Dazu
> einfach einen Account anlegen und einen neuen Eintrag erfassen:
> https://mantis.freifunk-franken.de
>
> Ich bedanke mich für die vielen Beiträge und die super Diskussionen.
>
> Unten, wie immer, das Shortlog.
>
> Tim
>
> --
> Adrian Schmutzler (70):
> fff-nodewatcher: Use mac address instead of standard node name
> buildscript: Update LEDE and packages, use lede git mirror
> Archer C25: Update qca9887 firmware to 10.2.4-1.0-00029
> vpn-select: Use keyxchangev2data instead of fastd_fff_output
> Remove references to community.cfg
> fff-web: Show hood in public and internal web interface
> Configure the Node a routable IPv6 ULA
> fff-hoods: Fix fe80::1 for multiple configap interfaces
> fff-hoods: Fix case of missing keyxchangev2data
> Utilize PKG_NAME in Makefiles
> Revert "Archer C25: Disable 5 GHz to provide working firmware"
> buildscript: Fix typo
> fff-hoods: Use channel provided by gateway
> fff-hoods: Introduce sector files for custom settings
> fff-hoods: Use variables for hood file names
> fff-hoods: Use w5sta for download
> fff-hoods: Fix missing commit for hood name
> fff-network/fff-hoods: Create functions for IPv6 rewriting
> CPE210: Fix ROUTERMAC
> fff-web: Extend switch port assignment display in ports.html
> fff-boardname: Reorganize WR841 boardnames
> Add TL-WR1043N v5
> fff-network: Fix mac adresses not set during merge/rebase
> fff-hoods/fff-wireless: Don't delete WiFi devices
> fff-hoods: Suppress warning for missing sectorfile
> Support subtarget in buildscript
> fff-web: Fix style and XHTML conformity in upgrade.html
> show_info: Add assignment without switch
> fff-web: Show WiFi channels and SSID
> show_info: Display hood information
> Rearrange fff config values into their own config file
> fff-support: Update PoE passthrough code
> fff-web: Added options to disable update notification
> fff-web: Include new options into settings.html
> fff-web/show_info: Put common code into function
> fff-network: Fix second occurrence of ROUTERMAC and ETHMESHMAC
> fff-web: Allow minus (-) in passwords
> fff-network: Commit only network
> configurehood: Wait for the config AP to build when in sta mode
> configurehood: Prevent connecting two hoods
> nodewatcher: Provide additional information about WiFi interfaces
> LEDE: Go back to OpenWRT sources
> configurenetwork: Put One- and Two-Port pre-setup into function
> fff-network/fff-hoods: Only use MAC address in network lib
> fff-network: Calculate IPv6 using ROUTERMAC variable
> nodewatcher: Fix bugs in gateway list creation
> fff-hoods: Replace hiddenapflag by check for real conditions
> fff-sysupgrade/fff-hoods: Make sectorfile upgradesafe
> GL-AR150: Fix ETHMESHMAC
> fff-hoods: Restart alfred after keyxchange file update
> fff-nodewatcher: Add detailed clients data
> nodewatcher: Provide data to calculate airtime
> fff-web: Fix two bugs in wifiscan.html
> configurehood: Improve conditions for configap setup
> packages/fff: Split fff-hoods into two packages
> fff-web: UPGRADE_PATH in header should be taken from hood file
> configurehood: Fix "wifi" blocking correct network status
> detection
> alfred: Support interfaces IDs with more than two digits
> Unifi AC: remove bs-partition ro-flag
> configurenetwork: Improve output when setting IPv6 addresses
> fff-batman-adv: Remove vis_mode from uci config
> Data processing notes: Add in fff-web
> Data processing notes: Add for SSH access
> hood files: Use more meaningful and concise naming scheme
> hood file: Use different files for www and for checksum
> comparison
> configurehood: Only provide hood file from GW/KeyXchange via WWW
> hood files: Move files from /www to /tmp and link there
> configurehood: Don't remove timestamp for checksum comparison
> nodewatcher: Change mechanism for client device detection
> vpn-select: Demand hood file to be provided as argument
>
> Christian Dresel (7):
> Update Batman to compat15
> Reconfigure fff-wireless for keyxchangev2
> Reconfigure vpn-select for keyxchangev2
> Add fff-hoods
> Add support for Unifi AC Mesh
> fff-hoods: Make possible to use fixed hoodfile
> Disable VPN if not in use
>
> Fabian Blaese (12):
> Support batman-adv meshing over 802.11s
> consistently use same webserver port for hoodfile on wifi and lan
> fff-network: evaluate macaddress in device config
> Use SWITCHDEV variable for mac address fixing
> configurehood: Allow for spaces after identifier
> fff-network: Get MAC from wifi device instead of wifi network
> CPE510: Add ROUTERMAC
> Revert openwrt patch which caused too high tx powers
> Move hoodfile acquisition into function
> Allow initial configuration from Ethernet
> Remove sectorfile for first release
> Add batman-adv patch to remove gw mode switch message
>
> Robert Langhammer (7):
> fff-hoods: fix sed to substitute timestamp
> fastd: generate the key from urandom
> Update tunneldigger
> fff-network: correct path to iptables
> Update tunneldigger
> Remove double equals.
> Remove double square bracket. [[ is a bash or ksh built-in, and
> cannot be used in a #!/bin/sh script.
>
> Tim Niemeyer (14):
> fff-hoods: only delete hiddenapfile if ap was configured
> fff-hoods: move hiddenapfile variable
> fff-alfred: new package
> fff-alfred: do not use bat0 for master selection
> WR841-v7: get routermac from phy0 instead of wlan0
> bsp/default: move network sysctl's to fff-network
> fff-network: move sysctl settings to a function
> fff-firewall: clean up v6 rules on prepare
> fff-network: rework sysctl's
> fff-network: enable forwarding; filter forwarding
> fff-macnock: new package
> fff-hoods: set hood to none if on station mode
> fff-hoods: call reload_config after uci commit
> Revert "configurehood: Prevent connecting two hoods"
>
-------------- nächster Teil --------------
Ein Dateianhang mit HTML-Daten wurde abgetrennt...
URL: <http://lists.freifunk.net/pipermail/franken-dev-freifunk.net/attachments/20180805/45d9e3b7/attachment.html>
Mehr Informationen über die Mailingliste franken-dev