[v9,4/4] Add fff-hoods
Christian Dresel
fff at chrisi01.de
Mi Sep 27 12:35:54 CEST 2017
noch ein Fehler:
On 27.09.2017 09:54, Christian Dresel wrote:
> hi
>
> Das ganze Paket muss noch in der fff-base aktiviert werden, das hab aber
> wohl schon ich vermasselt da es wohl auch schon in den früheren
> Patchversionen von mir fehlt. Sollte bei der nächsten Version mit
> nachgetragen werden.
>
> mfg
>
> Christian
>
> (sry wegen der doppelten Mail, ich hab die Absenderadresse mal wieder
> vermurkst...)
>
> On 21.09.2017 16:02, Adrian Schmutzler wrote:
>> From: Christian Dresel <fff at chrisi01.de>
>>
>> this packages connect to keyxchangev2
>> after review we must change the serveradress! This is only a example
>>
>> Signed-off-by: Christian Dresel <fff at chrisi01.de>
>> Signed-off-by: Jan Kraus <mayosemmel at gmail.com>
>>
>> Update in v2:
>> - clean tabstops
>> - move the json vpn out of the if because we need this after reboot
>>
>> Update in v5:
>> !!UNTESTED!!
>> - change hidden AP ip to locallink
>> - Open hidden AP after more checks
>> - Load json File from Gateway if Gateway in Batman in Range
>>
>> Update in v6:
>> !!UNTESTED!!
>> - fix hidden station v6
>> - fix -n to -f if
>> - Add function to check for a gateway and use this
>> - remove /etc/community.cfg and variables
>> - send fewer infos to keyxchangev2
>> - add a check if /tmp/keyxchangev2 not downloadable and edit a bit on the wgets
>> - change the position from json_load and do this only 1 times
>>
>> Update in v7:
>> !!UNTESTED!!
>> - delete keyxchangev2data at start of the script
>> - do only things with keyxchangev2data if available
>> - change keyxchangev2 url
>>
>> Update in v8/v9:
>> - rebase onto 20170918-beta
>> ---
>> src/packages/fff/fff-hoods/Makefile | 39 ++++
>> .../files/etc/hotplug.d/iface/50-fff-hoods | 5 +
>> .../fff/fff-hoods/files/usr/lib/micron.d/fff-hoods | 1 +
>> .../fff/fff-hoods/files/usr/sbin/configurehood | 205 +++++++++++++++++++++
>> 4 files changed, 250 insertions(+)
>> create mode 100644 src/packages/fff/fff-hoods/Makefile
>> create mode 100644 src/packages/fff/fff-hoods/files/etc/hotplug.d/iface/50-fff-hoods
>> create mode 100644 src/packages/fff/fff-hoods/files/usr/lib/micron.d/fff-hoods
>> create mode 100755 src/packages/fff/fff-hoods/files/usr/sbin/configurehood
>>
>> diff --git a/src/packages/fff/fff-hoods/Makefile b/src/packages/fff/fff-hoods/Makefile
>> new file mode 100644
>> index 0000000..f85178d
>> --- /dev/null
>> +++ b/src/packages/fff/fff-hoods/Makefile
>> @@ -0,0 +1,39 @@
>> +include $(TOPDIR)/rules.mk
>> +
>> +PKG_NAME:=fff-hoods
>> +PKG_VERSION:=0.0.1
>> +PKG_RELEASE:=1
>> +
>> +PKG_BUILD_DIR:=$(BUILD_DIR)/fff-hoods
>> +
>> +include $(INCLUDE_DIR)/package.mk
>> +
>> +define Package/fff-hoods
>> + SECTION:=base
>> + CATEGORY:=Freifunk
>> + TITLE:= Freifunk-Franken hoods
>> + URL:=http://www.freifunk-franken.de
>> + DEPENDS:=+fff-network
>> +endef
>> +
>> +define Package/fff-hoods/description
>> + This package load and configures the current hood
>> +endef
>> +
>> +define Build/Prepare
>> + echo "all: " > $(PKG_BUILD_DIR)/Makefile
>> +endef
>> +
>> +define Build/Configure
>> + # nothing
>> +endef
>> +
>> +define Build/Compile
>> + # nothing
>> +endef
>> +
>> +define Package/fff-hoods/install
>> + $(CP) ./files/* $(1)/
>> +endef
>> +
>> +$(eval $(call BuildPackage,fff-hoods))
>> diff --git a/src/packages/fff/fff-hoods/files/etc/hotplug.d/iface/50-fff-hoods b/src/packages/fff/fff-hoods/files/etc/hotplug.d/iface/50-fff-hoods
>> new file mode 100644
>> index 0000000..49f53e3
>> --- /dev/null
>> +++ b/src/packages/fff/fff-hoods/files/etc/hotplug.d/iface/50-fff-hoods
>> @@ -0,0 +1,5 @@
>> +#!/bin/sh
>> +[ "$ACTION" = "ifup" -a "$INTERFACE" = "wan" ] && {
>> + sleep 3
>> + /usr/sbin/configurehood
>> +}
>> diff --git a/src/packages/fff/fff-hoods/files/usr/lib/micron.d/fff-hoods b/src/packages/fff/fff-hoods/files/usr/lib/micron.d/fff-hoods
>> new file mode 100644
>> index 0000000..ca8d798
>> --- /dev/null
>> +++ b/src/packages/fff/fff-hoods/files/usr/lib/micron.d/fff-hoods
>> @@ -0,0 +1 @@
>> +*/5 * * * * /usr/sbin/configurehood
>> diff --git a/src/packages/fff/fff-hoods/files/usr/sbin/configurehood b/src/packages/fff/fff-hoods/files/usr/sbin/configurehood
>> new file mode 100755
>> index 0000000..bfec822
>> --- /dev/null
>> +++ b/src/packages/fff/fff-hoods/files/usr/sbin/configurehood
>> @@ -0,0 +1,205 @@
>> +#!/bin/sh
>> +
>> +. /usr/share/libubox/jshn.sh
>> +. /lib/functions/fff/wireless
>> +
>> +rm /tmp/keyxchangev2data
>> +
>> +#Gatewaycheck function
>> +isGatewayAvailable() {
>> + if [ "$(batctl gwl | wc -l)" -gt 2 ]; then
>> + return true;
>> + else
>> + return false;
>> + fi
>> +}
>> +
>> +
>> +# hidden AP check
>> +
>> +if [ -f /tmp/hiddenapflag ]; then
>> + if [ isGatewayAvailable ]; then
>> + if ! wifiAddAP "$radio" "config.franken.freifunk.net" "configap" "configap" "1"; then
hier ist die Variable $radio noch nicht gesetzt, daher wird dem hidden
AP kein radio mitgegeben, folgende Zeile
wireless.w2configap.device='radio0'
fehlt komplett.
Muss man auch noch irgendwie fixen.
mfg
Christian
>> + echo "Can't add AP interface on $radio."
>> + exit 1
>> + else
>> + #we must set here a fix ip adress
>> + uci set network.configap=interface
>> + uci set network.configap.proto='static'
>> + uci set network.configap.ip6addr='fe80::1/64'
>> + uci commit network
>> + fi
>> + else
>> + rm /tmp/hiddenapflag
>> + fi
>> +fi
>> +
>> +
>> +lat=$(uci get system. at system[0].latitude)
>> +long=$(uci get system. at system[0].longitude)
>> +hostname=$(cat /proc/sys/kernel/hostname)
>> +[ "$hostname" = "OpenWrt" ] && hostname=""
>> +[ "$hostname" = "" ] && hostname="$mac"
>> +
>> +test_ipv4_host1="keyserver.freifunk-franken.de" # Freifunk-Franken keyserver
>> +test_ipv4_host2="8.8.8.8" # Google DNS
>> +test_ipv6_host1="heise.de" # heise Zeitschriftenverlag
>> +
>> +# if we have Internet, we download the Hoodfile from the keyxchangev2
>> +if ping -w5 -c3 "$test_ipv4_host1" &>/dev/null ||
>> + ping -w5 -c3 "$test_ipv4_host2" &>/dev/null ||
>> + ping6 -w5 -c3 "$test_ipv6_host1" &>/dev/null; then
>> + wget -T15 -t5 "http://keyserver.freifunk-franken.de/v2/?lat=$lat&long=$long" -O /tmp/keyxchangev2data
>> + #if no Internet, we connect to the hidden AP and download the file from another Node in range
>> +else
>> + # connect to wireless hidden ap here and download from the next router the json File -O /tmp/keyxchangev2data
>> + # only to that, when we have no gateway in range. If the Uplinkrouter change the hood, we lost the GW and to this automatically again i think! Nice idea?
>> + if [ ! isGatewayAvailable ]; then
>> + #now we haven't a gateway in Range, we search for a hidden AP to get a keyxchangev2data file!
>> + #first we delete all wifi settings
>> + if ! wifiDelAll; then
>> + echo "Can't delete current wifi setup"
>> + exit 1
>> + fi
>> + #now we look for phy and add this
>> + for phy in $(iw phy | awk '/^Wiphy/{ print $2 }'); do
>> + if iw phy "$phy" info | grep -q -m1 "2... MHz"; then
>> + echo "$phy is 2.4 GHz"
>> + radio=$(wifiAddPhy "$phy" "$BATMAN_CHANNEL")
>> + if [ -z "$radio" ]; then
>> + echo "Can't create radio for $phy"
>> + exit 1
>> + fi
>> + fi
>> + if iw phy "$phy" info | grep -q -m1 "5... MHz"; then
>> + echo "$phy is 5 GHz"
>> + radio=$(wifiAddPhy "$phy" "$BATMAN_CHANNEL_5GHZ")
>> + if [ -z "$radio" ]; then
>> + echo "Can't create radio for $phy"
>> + exit 1
>> + fi
>> + fi
>> + #and here we add the station
>> + if ! wifiAddSta "$radio" "config.franken.freifunk.net" "configSta"; then
>> + echo "Can't add Sta interface on $radio."
>> + exit 1
>> + fi
>> +
>> + done
>> + wifi
>> + # wait a moment to start the interface
>> + sleep 10;
>> + #and here we can download the Hoodfile from the other node
>> + wget -T15 -t5 "http://[fe80::1%w2sta]/keyxchangev2data" -O /tmp/keyxchangev2data
>> + else
>> + echo "We have a Gateway in Range, we load the keyxchangev2data from fe80::1"
>> + wget -T15 -t5 "http://[fe80::1%br-mesh]/keyxchangev2data" -O /tmp/keyxchangev2data
>> + fi
>> +
>> +
>> +fi
>> +
>> +if [ -s /tmp/keyxchangev2data ]; then
>> +
>> + # we get a json file in this format:
>> + # https://pw.freifunk-franken.de/patch/205/
>> + # but without signature, every hood file we get is valid!
>> +
>> + json_load "$(cat /tmp/keyxchangev2data)"
>> + sumnew=$(sha256sum /tmp/keyxchangev2data | cut -f1 -d " ")
>> + sumold=$(sha256sum /www/public/keyxchangev2data | cut -f1 -d " ")
>> + if [ "$sumnew" != "$sumold" ] && [ -f /tmp/keyxchangev2data]; then
>> + echo "New file detect, we reconfigure the Node";
>> +
>> + # copy the file to webroot that other Meshrouter can download them
>> + cp /tmp/keyxchangev2data /www/public/
>> +
>> + json_select hood
>> +
>> + json_get_var hood name
>> + json_get_var mesh_bssid mesh_bssid
>> + json_get_var mesh_essid mesh_essid
>> + json_get_var essid essid
>> + # i think the next things we don't active this in the first version! we can do it later
>> + #json_get_var channel2 channel2
>> + #json_get_var mode2 mode2
>> + #json_get_var type2 type2
>> + #json_get_var channel5 channel5
>> + #json_get_var mode5 mode5
>> + #json_get_var type5 type5
>> + #json_get_var protocol protocol
>> +
>> + echo "Setting hood name: $hood"
>> + uci set system. at system[0].hood=$hood
>> +
>> + if ! wifiDelAll; then
>> + echo "Can't delete current wifi setup"
>> + exit 1
>> + fi
>> +
>> + for phy in $(iw phy | awk '/^Wiphy/{ print $2 }'); do
>> + if iw phy "$phy" info | grep -q -m1 "2... MHz"; then
>> + echo "$phy is 2.4 GHz"
>> + radio=$(wifiAddPhy "$phy" "1")
>> + if [ -z "$radio" ]; then
>> + echo "Can't create radio for $phy"
>> + exit 1
>> + fi
>> + fi
>> + if iw phy "$phy" info | grep -q -m1 "5... MHz"; then
>> + echo "$phy is 5 GHz"
>> + radio=$(wifiAddPhy "$phy" "13")
>> + if [ -z "$radio" ]; then
>> + echo "Can't create radio for $phy"
>> + exit 1
>> + fi
>> + fi
>> +
>> + if ! wifiAddAP "$radio" "$essid" "mesh" "ap" "0"; then
>> + echo "Can't add AP interface on $radio."
>> + exit 1
>> + fi
>> +
>> + # here we set a bit for add hidden AP
>> + touch /tmp/hiddenapflag
>> +
>> + if ! wifiAddAdHocMesh "$radio" "$mesh_essid" "$mesh_bssid"; then
>> + echo "Can't add AP interface on $radio."
>> + exit 1
>> + fi
>> + done
>> +
>> + echo "Loading wifi"
>> + wifi
>> +
>> +
>> + else
>> + echo "we have no new file or we have no file get. We do nothing. We try it again in 5 minutes...";
>> + fi
>> +
>> + # and now we read the VPN Data and give this data to fff-vpn
>> +
>> + json_select vpn
>> + Index="1"
>> + rm /tmp/fastd_fff_output
>> + touch /tmp/fastd_fff_output
>> + while json_select $Index > /dev/null
>> + do
>> + json_get_var protocol protocol
>> + if [ "$protocol" == "fastd"]; then
>> + json_get_var servername name
>> + echo "####$servername.conf" >> /tmp/fastd_fff_output
>> + echo "#name \"$servername\";" >> /tmp/fastd_fff_output
>> + json_get_var key key
>> + echo "key \"$key\";" >> /tmp/fastd_fff_output
>> + json_get_var address address
>> + json_get_var port port
>> + echo "remote ipv4 \"$address\" port $port float;" >> /tmp/fastd_fff_output
>> + fi
>> + echo "" >> /tmp/fastd_fff_output
>> + echo "###" >> /tmp/fastd_fff_output
>> + done
>> + #this we do every 5 minutes, because it can change the VPN Protocol
>> + #and now we get to vpn-select Script and load VPNs
>> + sh /usr/sbin/vpn-select
>> +fi
>
>
>
>
-------------- nächster Teil --------------
Ein Dateianhang mit Binärdaten wurde abgetrennt...
Dateiname : signature.asc
Dateityp : application/pgp-signature
Dateigröße : 819 bytes
Beschreibung: OpenPGP digital signature
URL : <http://lists.freifunk.net/pipermail/franken-dev-freifunk.net/attachments/20170927/71a6455a/attachment.sig>
Mehr Informationen über die Mailingliste franken-dev