[RFC PATCH] WA850RE v2: Prepare device for support
mail at adrianschmutzler.de
mail at adrianschmutzler.de
Sa Okt 14 16:35:35 CEST 2017
Hallo Tim,
die Partitionierung hat sich glaube ich geändert:
https://github.com/lede-project/source/commit/56561b9f5198d39604809e5cc10dead3e12c1fdf
Da das Ding fast nichts kostet, werde ich mir demnächst eins bestellen und ausprobieren.
Ich hab den Patch v.a. deshalb herumgeschickt, falls jemand weiß, wie ich NUR für den WA850RE v2 das Paket fff-web abwählen kann.
Grüße
Adrian
> -----Original Message-----
> From: Tim Niemeyer [mailto:tim at tn-x.org]
> Sent: Samstag, 14. Oktober 2017 16:30
> To: Adrian Schmutzler <freifunk at adrianschmutzler.de>; franken-
> dev at freifunk.net
> Subject: Re: [RFC PATCH] WA850RE v2: Prepare device for support
>
> Hi
>
> Am Samstag, den 14.10.2017, 16:22 +0200 schrieb Adrian Schmutzler:
> > The v2 version of the WA850RE provides less space and can thus
> Warum ist das dort so? Was ist bei dem Ding anders?
>
> > not be implemented in the typical way. However, image creation is
> > possible if the WebUI is deselected.
> > Since I have not been able to do this only for a single device, this
> > patch provides the necessarily files to build the firmware for the
> > WA850RE v2 by doing only a few changes, but does not affect the normal
> > build process.
> >
> > UNTESTED. WA850RE does NOT provide a recovery mechanism.
> Das wird dann vermutlich auch eher untested bleiben. Am Ende ziehen wir
> den Port ne Weile mit und irgendwann geht er mal kaputt.
>
> Tim
>
> > Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> > ---
> > bsp/ar71xx/.config | 2 +
> > bsp/board_ar71xx.bsp | 1 +
> > ...1xx-add-support-for-TP-Link-TL-WA850RE-v2.patch | 433
> > +++++++++++++++++++++
> > .../fff/fff-network/ar71xx/network.tl-wa850re-v2 | 11 +
> > 4 files changed, 447 insertions(+)
> > create mode 100644 build_patches/openwrt/0009-ar71xx-add-support-
> > for-TP-Link-TL-WA850RE-v2.patch
> > create mode 100644 src/packages/fff/fff-network/ar71xx/network.tl-
> > wa850re-v2
> >
> > diff --git a/bsp/ar71xx/.config b/bsp/ar71xx/.config index
> > b407f7d..8ecf51a 100644
> > --- a/bsp/ar71xx/.config
> > +++ b/bsp/ar71xx/.config
> > @@ -18,6 +18,8 @@ CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-
> > mr3020-v1=y
> > CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_tl-mr3020-
> v1=""
> > CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-wa850re-v1=y
> > CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_tl-
> wa850re-v1=""
> > +#CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-wa850re-v2=y
> > +#CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_tl-
> wa850re-
> > v2=""
> > CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-wa860re-v1=y
> > CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_tl-
> wa860re-v1=""
> > CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-wa901nd-v2=y
> > diff --git a/bsp/board_ar71xx.bsp b/bsp/board_ar71xx.bsp index
> > 1137b0d..5fb24c0 100644
> > --- a/bsp/board_ar71xx.bsp
> > +++ b/bsp/board_ar71xx.bsp
> > @@ -21,6 +21,7 @@ images=("lede-ar71xx-generic-cpe210-220-squashfs-
> > sysupgrade.bin"
> > "lede-ar71xx-generic-tl-wr1043nd-v4-squashfs-sysupgrade.bin"
> > "lede-ar71xx-generic-tl-wa860re-v1-squashfs-sysupgrade.bin"
> > "lede-ar71xx-generic-tl-wa850re-v1-squashfs-sysupgrade.bin"
> > +# "lede-ar71xx-generic-tl-wa850re-v2-squashfs-sysupgrade.bin"
> > "lede-ar71xx-generic-tl-wa901nd-v2-squashfs-sysupgrade.bin"
> > "lede-ar71xx-generic-gl-ar150-squashfs-sysupgrade.bin"
> > "lede-ar71xx-generic-tl-mr3020-v1-squashfs-sysupgrade.bin"
> > diff --git a/build_patches/openwrt/0009-ar71xx-add-support-for-TP-
> > Link-TL-WA850RE-v2.patch b/build_patches/openwrt/0009-ar71xx-add-
> > support-for-TP-Link-TL-WA850RE-v2.patch
> > new file mode 100644
> > index 0000000..3a69ce4
> > --- /dev/null
> > +++ b/build_patches/openwrt/0009-ar71xx-add-support-for-TP-Link-TL-
> > WA850RE-v2.patch
> > @@ -0,0 +1,433 @@
> > +From 90bccc9510f66b26ff5bd324d31752676317bdcf Mon Sep 17 00:00:00
> > 2001
> > +From: Piotr Dymacz <pepe2k at gmail.com>
> > +Date: Fri, 10 Feb 2017 13:44:06 +0100
> > +Subject: [PATCH] ar71xx: add support for TP-Link TL-WA850RE v2
> > +
> > +TP-Link TL-WA850RE v2 is a wall-plug N300 Wi-Fi range extender, based
> > +on Qualcomm/Atheros QCA9533 v2.
> > +
> > +Short specification:
> > +
> > +- 550/391/195 MHz (CPU/DDR/AHB)
> > +- 1x 10/100 Mbps Ethernet
> > +- 32 MB of RAM (DDR1)
> > +- 4 MB of FLASH
> > +- 2T2R 2.4 GHz
> > +- 2x internal antennas (embedded on PCB)
> > +- 9x LED (all can be turned off with GPIO15), 2x button
> > +- UART (J3) header on PCB
> > +
> > +Flash instruction: use "factory" image directly in vendor GUI.
> > +
> > +Warning: this device does not include any kind of recovery mechanism
> > +in the bootloader and disassembling process is not trivial.
> > +
> > +You can access vendor firmware over serial line using:
> > +- login: root
> > +- password: sohoadmin
> > +
> > +Image was tested only in US version of the device, but should work
> > +also with the same device version sold in other countries.
> > +
> > +Available FLASH space, with LEDE trunk, is only 240 KB.
> > +
> > +Signed-off-by: Piotr Dymacz <pepe2k at gmail.com> [Rebased on 8ad1b09]
> > +Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> > +---
> > + target/linux/ar71xx/base-files/etc/board.d/01_leds | 3 +-
> > +.../linux/ar71xx/base-files/etc/board.d/02_network | 1 +
> > +target/linux/ar71xx/base-files/etc/diag.sh | 3 +-
> > +target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
> > +.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
> > + target/linux/ar71xx/config-4.4 | 1 +
> > +.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 9 ++
> > +target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
> > +.../ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c | 103
> > ++++++++++++++++++++-
> > + .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
> > + target/linux/ar71xx/image/tp-link.mk | 16 +++-
> > + target/linux/ar71xx/mikrotik/config-default | 1 +
> > + target/linux/ar71xx/nand/config-default | 1 +
> > + tools/firmware-utils/src/tplink-safeloader.c | 43 +++++++++
> > + 14 files changed, 182 insertions(+), 5 deletions(-)
> > +
> > +diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > +index e1efb56..b98f58e 100755
> > +--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > ++++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > +@@ -568,7 +568,8 @@ tl-wa801nd-v3)
> > + ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan"
> > "eth1"
> > + ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan"
> > "phy0tpt"
> > + ;;
> > +-tl-wa850re)
> > ++tl-wa850re|\
> > ++tl-wa850re-v2)
> > + ucidef_set_led_netdev "lan" "LAN" "tp-link:blue:lan" "eth0"
> > + ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan"
> > "phy0tpt"
> > + ucidef_set_rssimon "wlan0" "200000" "1"
> > +diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network
> > b/target/linux/ar71xx/base-files/etc/board.d/02_network
> > +index 24ead87..d5b6fba 100755
> > +--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
> > ++++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
> > +@@ -106,6 +106,7 @@ ar71xx_setup_interfaces()
> > + tl-wa801nd-v2|\
> > + tl-wa830re-v2|\
> > + tl-wa850re|\
> > ++ tl-wa850re-v2|\
> > + tl-wa901nd|\
> > + tl-wa901nd-v2|\
> > + tl-wa901nd-v3|\
> > +diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
> > b/target/linux/ar71xx/base-files/etc/diag.sh
> > +index 38cc5d7..f2709d7 100644
> > +--- a/target/linux/ar71xx/base-files/etc/diag.sh
> > ++++ b/target/linux/ar71xx/base-files/etc/diag.sh
> > +@@ -340,7 +340,8 @@ get_status_led() {
> > + tl-wa750re)
> > + status_led="tp-link:orange:re"
> > + ;;
> > +- tl-wa850re)
> > ++ tl-wa850re|\
> > ++ tl-wa850re-v2)
> > + status_led="tp-link:blue:re"
> > + ;;
> > + tl-wa860re)
> > +diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > +index 46711af..b793223 100755
> > +--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > ++++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > +@@ -986,6 +986,9 @@ ar71xx_board_detect() {
> > + *TL-WA850RE)
> > + name="tl-wa850re"
> > + ;;
> > ++ *"TL-WA850RE v2")
> > ++ name="tl-wa850re-v2"
> > ++ ;;
> > + *TL-WA860RE)
> > + name="tl-wa860re"
> > + ;;
> > +diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > +index e65f6e2..cac9409 100755
> > +--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > ++++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > +@@ -397,6 +397,7 @@ platform_check_image() {
> > + tl-wa801nd-v3|\
> > + tl-wa830re-v2|\
> > + tl-wa850re|\
> > ++ tl-wa850re-v2|\
> > + tl-wa860re|\
> > + tl-wa901nd-v2|\
> > + tl-wa901nd-v3|\
> > +diff --git a/target/linux/ar71xx/config-4.4
> > b/target/linux/ar71xx/config-4.4
> > +index 0187775..3fdc9a0 100644
> > +--- a/target/linux/ar71xx/config-4.4
> > ++++ b/target/linux/ar71xx/config-4.4
> > +@@ -168,6 +168,7 @@ CONFIG_ATH79_MACH_TL_WA701ND_V2=y
> > +CONFIG_ATH79_MACH_TL_WA7210N_V2=y
> > + CONFIG_ATH79_MACH_TL_WA801ND_V3=y
> > + CONFIG_ATH79_MACH_TL_WA830RE_V2=y
> > ++CONFIG_ATH79_MACH_TL_WA850RE_V2=y
> > + CONFIG_ATH79_MACH_TL_WA901ND=y
> > + CONFIG_ATH79_MACH_TL_WA901ND_V2=y
> > + CONFIG_ATH79_MACH_TL_WA901ND_V4=y
> > +diff --git
> > a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> > b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> > +index 4112fd3..a48db65 100644
> > +--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> > ++++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> > +@@ -1369,6 +1369,15 @@ config ATH79_MACH_TL_WA830RE_V2
> > + select ATH79_DEV_USB
> > + select ATH79_DEV_WMAC
> > +
> > ++config ATH79_MACH_TL_WA850RE_V2
> > ++ bool "TP-LINK TL-WA850RE v2 support"
> > ++ select SOC_QCA953X
> > ++ select ATH79_DEV_ETH
> > ++ select ATH79_DEV_GPIO_BUTTONS
> > ++ select ATH79_DEV_LEDS_GPIO
> > ++ select ATH79_DEV_M25P80
> > ++ select ATH79_DEV_WMAC
> > ++
> > + config ATH79_MACH_TL_WA901ND
> > + bool "TP-LINK TL-WA901ND/TL-WA7510N support"
> > + select SOC_AR724X
> > +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> > b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> > +index 3365a43..71995de 100644
> > +--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> > ++++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> > +@@ -172,6 +172,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2)
>
> > += mach-tl-wa701nd-v2.o
> > + obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-
> > wa7210n-v2.o
> > + obj-$(CONFIG_ATH79_MACH_TL_WA801ND_V3) += mach-tl-
> > wa801nd-v3.o
> > + obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-
> > wa830re-v2.o
> > ++obj-$(CONFIG_ATH79_MACH_TL_WA850RE_V2) += mach-tl-
> > wax50re.o
> > + obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-
> > wa901nd.o
> > + obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-
> > wa901nd-v2.o
> > + obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V4) += mach-tl-
> > wa901nd-v4.o
> > +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-
> > wax50re.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-
> > wax50re.c
> > +index 965b1cd..d7a1af4 100644
> > +--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c
> > ++++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c
> > +@@ -1,9 +1,13 @@
> > + /*
> > +- * TP-LINK TL-WA750RE v1/TL-WA801ND v2/TL-WA850RE v1/TL-
> WA901ND v3
> > +- * board support
> > ++ * Support for TP-Link boards:
> > ++ * - TL-WA750RE v1
> > ++ * - TL-WA801ND v2
> > ++ * - TL-WA850RE v1/v2
> > ++ * - TL-WA901ND v3
> > + *
> > + * Copyright (C) 2013 Martijn Zilverschoon <thefriedzombie at gmail.c
> > om>
> > + * Copyright (C) 2013 Jiri Pirko <jiri at resnulli.us>
> > ++ * Copyright (C) 2017 Piotr Dymacz <pepe2k at gmail.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > modify it
> > + * under the terms of the GNU General Public License version 2 as
> > published
> > +@@ -33,6 +37,17 @@
> > + #define TL_WAX50RE_GPIO_LED_SIGNAL4 3
> > + #define TL_WAX50RE_GPIO_LED_SIGNAL5 4
> > +
> > ++#define TL_WA850RE_V2_GPIO_LED_LAN 14
> > ++#define TL_WA850RE_V2_GPIO_LED_RE 12
> > ++#define TL_WA850RE_V2_GPIO_LED_SIGNAL1 0
> > ++#define TL_WA850RE_V2_GPIO_LED_SIGNAL2 1
> > ++#define TL_WA850RE_V2_GPIO_LED_SIGNAL3 2
> > ++#define TL_WA850RE_V2_GPIO_LED_SIGNAL4 3
> > ++#define TL_WA850RE_V2_GPIO_LED_SIGNAL5 4
> > ++#define TL_WA850RE_V2_GPIO_LED_WLAN 13
> > ++
> > ++#define TL_WA850RE_V2_GPIO_ENABLE_LEDS 15
> > ++
> > + #define TL_WA860RE_GPIO_LED_WLAN_ORANGE 0
> > + #define TL_WA860RE_GPIO_LED_WLAN_GREEN 2
> > + #define TL_WA860RE_GPIO_LED_POWER_ORANGE 12
> > +@@ -133,6 +148,42 @@ static struct gpio_led tl_wa850re_leds_gpio[]
> > __initdata = {
> > + },
> > + };
> > +
> > ++static struct gpio_led tl_wa850re_v2_leds_gpio[] __initdata = {
> > ++ {
> > ++ .name = "tp-link:blue:lan",
> > ++ .gpio = TL_WA850RE_V2_GPIO_LED_LAN,
> > ++ .active_low = 1,
> > ++ }, {
> > ++ .name = "tp-link:blue:re",
> > ++ .gpio = TL_WA850RE_V2_GPIO_LED_RE,
> > ++ .active_low = 1,
> > ++ }, {
> > ++ .name = "tp-link:blue:signal1",
> > ++ .gpio =
> > TL_WA850RE_V2_GPIO_LED_SIGNAL1,
> > ++ .active_low = 1,
> > ++ }, {
> > ++ .name = "tp-link:blue:signal2",
> > ++ .gpio =
> > TL_WA850RE_V2_GPIO_LED_SIGNAL2,
> > ++ .active_low = 1,
> > ++ }, {
> > ++ .name = "tp-link:blue:signal3",
> > ++ .gpio =
> > TL_WA850RE_V2_GPIO_LED_SIGNAL3,
> > ++ .active_low = 1,
> > ++ }, {
> > ++ .name = "tp-link:blue:signal4",
> > ++ .gpio =
> > TL_WA850RE_V2_GPIO_LED_SIGNAL4,
> > ++ .active_low = 1,
> > ++ }, {
> > ++ .name = "tp-link:blue:signal5",
> > ++ .gpio =
> > TL_WA850RE_V2_GPIO_LED_SIGNAL5,
> > ++ .active_low = 1,
> > ++ }, {
> > ++ .name = "tp-link:blue:wlan",
> > ++ .gpio = TL_WA850RE_V2_GPIO_LED_WLAN,
> > ++ .active_low = 1,
> > ++ },
> > ++};
> > ++
> > + static struct gpio_led tl_wa860re_leds_gpio[] __initdata = {
> > + {
> > + .name = "tp-link:green:lan",
> > +@@ -242,6 +293,30 @@ static void __init tl_ap123_setup(void)
> > + ath79_register_wmac(ee, mac);
> > + }
> > +
> > ++static void __init tl_ap143_setup(void) {
> > ++ u8 *mac = (u8 *) KSEG1ADDR(0x1f3c0008);
> > ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
> > ++ u8 tmpmac[ETH_ALEN];
> > ++
> > ++ ath79_register_m25p80(NULL);
> > ++
> > ++ ath79_setup_ar933x_phy4_switch(false, false);
> > ++
> > ++ ath79_register_mdio(0, 0x0);
> > ++
> > ++ ath79_switch_data.phy4_mii_en = 1;
> > ++ ath79_eth0_data.duplex = DUPLEX_FULL;
> > ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
> > ++ ath79_eth0_data.phy_mask = BIT(4);
> > ++ ath79_eth0_data.speed = SPEED_100;
> > ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac, -2);
> > ++ ath79_register_eth(0);
> > ++
> > ++ ath79_init_mac(tmpmac, mac, 0);
> > ++ ath79_register_wmac(ee, mac);
> > ++}
> > ++
> > + static void __init tl_wa750re_setup(void) {
> > + tl_ap123_setup();
> > +@@ -284,6 +359,30 @@ static void __init tl_wa850re_setup(void)
> > +MIPS_MACHINE(ATH79_MACH_TL_WA850RE, "TL-WA850RE", "TP-LINK
> TL-
> > WA850RE",
> > + tl_wa850re_setup);
> > +
> > ++static void __init tl_wa850re_v2_setup(void) {
> > ++ tl_ap143_setup();
> > ++
> > ++ /* For GPIO 0~4 */
> > ++ ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
> > ++ AR934X_GPIO_FUNC_CLK_OBS4_EN);
> > ++
> > ++ /* Allow to enable/disable all LEDs from userspace */
> > ++ gpio_request_one(TL_WA850RE_V2_GPIO_ENABLE_LEDS,
> > ++ GPIOF_OUT_INIT_HIGH |
> > GPIOF_EXPORT_DIR_FIXED,
> > ++ "LEDs enable");
> > ++
> > ++ ath79_register_leds_gpio(-1,
> > ARRAY_SIZE(tl_wa850re_v2_leds_gpio),
> > ++ tl_wa850re_v2_leds_gpio);
> > ++
> > ++ ath79_register_gpio_keys_polled(-1,
> > TL_WAX50RE_KEYS_POLL_INTERVAL,
> > ++ ARRAY_SIZE(tl_wax50re_gpio_
> > keys),
> > ++ tl_wax50re_gpio_keys);
> > ++}
> > ++
> > ++MIPS_MACHINE(ATH79_MACH_TL_WA850RE_V2, "TL-WA850RE-V2",
> > ++ "TP-LINK TL-WA850RE v2", tl_wa850re_v2_setup);
> > ++
> > + static void __init tl_wa860re_setup(void) {
> > + tl_ap123_setup();
> > +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > +index 8864e0d..61d2225 100644
> > +--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > ++++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > +@@ -202,6 +202,7 @@ enum ath79_mach_type {
> > + ATH79_MACH_TL_WA801ND_V3, /* TP-LINK TL-
> > WA801ND v3 */
> > + ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-
> > WA830RE v2 */
> > + ATH79_MACH_TL_WA850RE, /* TP-LINK
> > TL-WA850RE */
> > ++ ATH79_MACH_TL_WA850RE_V2, /* TP-LINK TL-
> > WA850RE v2 */
> > + ATH79_MACH_TL_WA860RE, /* TP-LINK
> > TL-WA860RE */
> > + ATH79_MACH_TL_WA901ND, /* TP-LINK
> > TL-WA901ND */
> > + ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-
> > WA901ND v2 */
> > +diff --git a/target/linux/ar71xx/image/tp-link.mk
> > b/target/linux/ar71xx/image/tp-link.mk
> > +index 32d16f9..3b908ac 100644
> > +--- a/target/linux/ar71xx/image/tp-link.mk
> > ++++ b/target/linux/ar71xx/image/tp-link.mk
> > +@@ -974,6 +974,20 @@ define Device/tl-wa850re-v1
> > + TPLINK_HWID := 0x08500001
> > + endef
> > +
> > ++define Device/tl-wa850re-v2
> > ++ $(Device/tplink)
> > ++ DEVICE_TITLE := TP-LINK TL-WA850RE v2
> > ++ DEVICE_PACKAGES := rssileds
> > ++ BOARDNAME := TL-WA850RE-V2
> > ++ DEVICE_PROFILE := TLWA850
> > ++ TPLINK_BOARD_NAME := TLWA850REV2
> > ++ TPLINK_HWID := 0x08500002
> > ++ KERNEL := kernel-bin | patch-cmdline | lzma | mktplinkfw-kernel
> > ++ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader
> > sysupgrade
> > ++ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
> > ++ MTDPARTS := spi0.0:128k(u-
> > boot)ro,1344k(kernel),2304k(rootfs),256k(config)ro,64k(art)ro,3648k at 0
> > x20000(firmware)
> > ++endef
> > ++
> > + define Device/tl-wa860re-v1
> > + $(Device/tplink-4mlzma)
> > + DEVICE_TITLE := TP-LINK TL-WA860RE @@ -981,7 +995,7 @@ define
> > +Device/tl-wa860re-v1
> > + DEVICE_PROFILE := TLWA860
> > + TPLINK_HWID := 0x08600001
> > + endef
> > +-TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa801nd-v3 tl-
> > wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa860re-v1
> > ++TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa801nd-v3 tl-
> > wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa850re-v2 tl-wa860re-v1
> > +
> > + define Device/tl-wa901nd-v1
> > + $(Device/tplink-4m)
> > +diff --git a/target/linux/ar71xx/mikrotik/config-default
> > b/target/linux/ar71xx/mikrotik/config-default
> > +index 376835a..6375b7f 100644
> > +--- a/target/linux/ar71xx/mikrotik/config-default
> > ++++ b/target/linux/ar71xx/mikrotik/config-default
> > +@@ -133,6 +133,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y #
> > +CONFIG_ATH79_MACH_TL_WA7210N_V2 is not set #
> > +CONFIG_ATH79_MACH_TL_WA801ND_V3 is not set #
> > +CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set
> > ++# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set
> > + # CONFIG_ATH79_MACH_TL_WA901ND is not set #
> > +CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set #
> > +CONFIG_ATH79_MACH_TL_WA901ND_V4 is not set diff --git
> > +a/target/linux/ar71xx/nand/config-default
> > b/target/linux/ar71xx/nand/config-default
> > +index 62be218..8c67867 100644
> > +--- a/target/linux/ar71xx/nand/config-default
> > ++++ b/target/linux/ar71xx/nand/config-default
> > +@@ -47,6 +47,7 @@
> > + # CONFIG_ATH79_MACH_TL_MR13U is not set #
> > +CONFIG_ATH79_MACH_TL_MR3020 is not set #
> CONFIG_ATH79_MACH_TL_MR3X20
> > +is not set
> > ++# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set
> > + # CONFIG_ATH79_MACH_TL_WA901ND is not set #
> > +CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set #
> > +CONFIG_ATH79_MACH_TL_WDR3500 is not set diff --git
> > +a/tools/firmware-utils/src/tplink-safeloader.c
> > b/tools/firmware-utils/src/tplink-safeloader.c
> > +index 2468426..82a5fe5 100644
> > +--- a/tools/firmware-utils/src/tplink-safeloader.c
> > ++++ b/tools/firmware-utils/src/tplink-safeloader.c
> > +@@ -441,6 +441,49 @@ static struct device_info boards[] = {
> > + .last_sysupgrade_partition = "file-system"
> > + },
> > +
> > ++ /** Firmware layout for the TL-WA850RE v2 */
> > ++ {
> > ++ .id = "TLWA850REV2",
> > ++ .vendor = "",
> > ++ .support_list =
> > ++ "SupportList:\n"
> > ++ "{product_name:TL-
> > WA850RE,product_ver:2.0.0,special_id:55530000}\n"
> > ++ "{product_name:TL-
> > WA850RE,product_ver:2.0.0,special_id:00000000}\n"
> > ++ "{product_name:TL-
> > WA850RE,product_ver:2.0.0,special_id:55534100}\n"
> > ++ "{product_name:TL-
> > WA850RE,product_ver:2.0.0,special_id:45550000}\n"
> > ++ "{product_name:TL-
> > WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
> > ++ "{product_name:TL-
> > WA850RE,product_ver:2.0.0,special_id:42520000}\n"
> > ++ "{product_name:TL-
> > WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
> > ++ "{product_name:TL-
> > WA850RE,product_ver:2.0.0,special_id:43410000}\n"
> > ++ "{product_name:TL-
> > WA850RE,product_ver:2.0.0,special_id:41550000}\n"
> > ++ "{product_name:TL-
> > WA850RE,product_ver:2.0.0,special_id:52550000}\n",
> > ++ .support_trail = '\x00',
> > ++
> > ++ /**
> > ++ 576KB were moved from file-system to os-image
> > ++ in comparison to the stock image
> > ++ */
> > ++ .partitions = {
> > ++ {"fs-uboot", 0x00000, 0x20000},
> > ++ {"os-image", 0x20000, 0x150000},
> > ++ {"file-system", 0x170000, 0x240000},
> > ++ {"partition-table", 0x3b0000, 0x02000},
> > ++ {"default-mac", 0x3c0000, 0x00020},
> > ++ {"pin", 0x3c0100, 0x00020},
> > ++ {"product-info", 0x3c1000, 0x01000},
> > ++ {"soft-version", 0x3c2000, 0x00100},
> > ++ {"support-list", 0x3c3000, 0x01000},
> > ++ {"profile", 0x3c4000, 0x08000},
> > ++ {"user-config", 0x3d0000, 0x10000},
> > ++ {"default-config", 0x3e0000, 0x10000},
> > ++ {"radio", 0x3f0000, 0x10000},
> > ++ {NULL, 0, 0}
> > ++ },
> > ++
> > ++ .first_sysupgrade_partition = "os-image",
> > ++ .last_sysupgrade_partition = "file-system"
> > ++ },
> > ++
> > + /** Firmware layout for the TL-WR1043 v4 */
> > + {
> > + .id = "TLWR1043NDV4",
> > +--
> > +2.7.4
> > +
> > diff --git a/src/packages/fff/fff-network/ar71xx/network.tl-wa850re-
> > v2 b/src/packages/fff/fff-network/ar71xx/network.tl-wa850re-v2
> > new file mode 100644
> > index 0000000..307a201
> > --- /dev/null
> > +++ b/src/packages/fff/fff-network/ar71xx/network.tl-wa850re-v2
> > @@ -0,0 +1,11 @@
> > +WANDEV=eth0
> > +SWITCHDEV=eth0
> > +CLIENT_PORTS=""
> > +WAN_PORTS=""
> > +BATMAN_PORTS=""
> > +ONE_PORT="YES"
> > +
> > +. /etc/network.mode
> > +
> > +ETHMESHMAC=
> > +ROUTERMAC=w2mesh
> > \ No newline at end of file
> > --
> > 2.7.4
> >
Mehr Informationen über die Mailingliste franken-dev