[PATCH v2] Add TL-WR1043N v5
Tim Niemeyer
tim at tn-x.org
Fr Nov 3 22:48:48 CET 2017
Hi
Und applied.
Tim
Am Freitag, den 03.11.2017, 13:20 +0100 schrieb Tim Niemeyer:
> Hi
>
> Schaut in sich schlüssig aus.
>
> Reviewed-by: Tim Niemeyer <tim at tn-x.org>
>
> Tim
>
> Am Freitag, den 20.10.2017, 15:04 +0200 schrieb Adrian Schmutzler:
> > This is based on the LEDE pull request as on 2017-10-17.
> >
> > Tested successfully on device (including flashing factory
> > image, no TFTP).
> >
> > Changes in v2:
> > - Added two patches satisfying dependencies
> > - Modified and renamed 1043v5 Patch
> > - Added correct calculation of ethmesh MAC
> >
> > Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> >
> > Tested-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> > ---
> > bsp/ar71xx/.config | 2 +
> > bsp/board_ar71xx.bsp | 1 +
> > ...ils-mktplinkfw-rework-combined-image-opti.patch | 264 ++++++++
> > ...mktplinkfw-combined-command-to-image-comm.patch | 103 +++
> > ...13-ar71xx-add-support-for-TL-WR1043N-v5.0.patch | 697
> > +++++++++++++++++++++
> > .../fff/fff-network/ar71xx/network.tl-wr1043n-v5 | 18 +
> > 6 files changed, 1085 insertions(+)
> > create mode 100644 build_patches/openwrt/0011-firmware-utils-
> > mktplinkfw-rework-combined-image-opti.patch
> > create mode 100644 build_patches/openwrt/0012-build-move-
> > mktplinkfw-
> > combined-command-to-image-comm.patch
> > create mode 100644 build_patches/openwrt/0013-ar71xx-add-support-
> > for-TL-WR1043N-v5.0.patch
> > create mode 100644 src/packages/fff/fff-network/ar71xx/network.tl-
> > wr1043n-v5
> >
> > diff --git a/bsp/ar71xx/.config b/bsp/ar71xx/.config
> > index 0a5b9b9..3cf8468 100644
> > --- a/bsp/ar71xx/.config
> > +++ b/bsp/ar71xx/.config
> > @@ -38,6 +38,8 @@ CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-
> > wr1043nd-v3=y
> > CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_tl-wr1043nd-
> > v3=""
> > CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-wr1043nd-v4=y
> > CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_tl-wr1043nd-
> > v4=""
> > +CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-wr1043n-v5=y
> > +CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_tl-wr1043n-
> > v5=""
> > CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-wr740n-v4=y
> > CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_tl-wr740n-
> > v4=""
> > CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-wr741nd-v2=y
> > diff --git a/bsp/board_ar71xx.bsp b/bsp/board_ar71xx.bsp
> > index 1137b0d..f5ee15b 100644
> > --- a/bsp/board_ar71xx.bsp
> > +++ b/bsp/board_ar71xx.bsp
> > @@ -19,6 +19,7 @@ images=("lede-ar71xx-generic-cpe210-220-squashfs-
> > sysupgrade.bin"
> > "lede-ar71xx-generic-tl-wr1043nd-v2-squashfs-
> > sysupgrade.bin"
> > "lede-ar71xx-generic-tl-wr1043nd-v3-squashfs-
> > sysupgrade.bin"
> > "lede-ar71xx-generic-tl-wr1043nd-v4-squashfs-
> > sysupgrade.bin"
> > + "lede-ar71xx-generic-tl-wr1043n-v5-squashfs-
> > sysupgrade.bin"
> > "lede-ar71xx-generic-tl-wa860re-v1-squashfs-
> > sysupgrade.bin"
> > "lede-ar71xx-generic-tl-wa850re-v1-squashfs-
> > sysupgrade.bin"
> > "lede-ar71xx-generic-tl-wa901nd-v2-squashfs-
> > sysupgrade.bin"
> > diff --git a/build_patches/openwrt/0011-firmware-utils-mktplinkfw-
> > rework-combined-image-opti.patch b/build_patches/openwrt/0011-
> > firmware-utils-mktplinkfw-rework-combined-image-opti.patch
> > new file mode 100644
> > index 0000000..ee54c85
> > --- /dev/null
> > +++ b/build_patches/openwrt/0011-firmware-utils-mktplinkfw-rework-
> > combined-image-opti.patch
> > @@ -0,0 +1,264 @@
> > +From b3cb0e75884222e141a40443c25d20deedf7a552 Mon Sep 17 00:00:00
> > 2001
> > +From: Piotr Dymacz <pepe2k at gmail.com>
> > +Date: Thu, 6 Jul 2017 16:34:47 +0200
> > +Subject: [PATCH] firmware-utils: mktplinkfw: rework combined image
> > option
> > +
> > +We use combined option in "mktplinkfw" tool for generating
> > initramfs
> > +kernel images and header for kernel inside "safeloader" image type
> > (in
> > +fact, only for TL-WR1043ND v4 at this moment).
> > +
> > +There is also "mktplinkfw-kernel" tool, a stripped-down version,
> > used
> > +only for generating "simple" header, for safeloader image types.
> > +
> > +This changes how "mktplinkfw" handles combined images (which then
> > will
> > +allow us to drop the stripped-down version of the tool):
> > +
> > +- drop "ignore size" command line option (it was used only for
> > combined
> > + images anyway)
> > +- don't require "flash layout id" for combined images (we don't
> > need
> > and
> > + shouldn't limit size of the initramfs kernel and for kernels
> > inside
> > + safeloader images, the "tplink-safeloader" tool does the size
> > check)
> > +- require kernel address and entry point in command line
> > parameters
> > for
> > + combined images (consequence of previous point)
> > +- don't include md5 sum and firmware length values in header (they
> > are
> > + needed only for update from vendor GUI and are ingored in case
> > of
> > + initramfs and "tplink-safeloader" images)
> > +- drop "fake" flash layout for TL-WR1043ND v4 as it's no longer
> > needed
> > +
> > +Also, adjust "mktplinkfw-combined" command in ar71xx/image/tp-
> > link.mk to
> > +match introduced changes in "mktplinkfw" tool.
> > +
> > +Signed-off-by: Piotr Dymacz <pepe2k at gmail.com>
> > +[Rebased on 8ad1b09]
> > +Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> > +---
> > + target/linux/ar71xx/image/tp-link.mk | 7 ++-
> > + tools/firmware-utils/src/mktplinkfw.c | 99 +++++++++++++++-------
> > --
> > -----------
> > + 2 files changed, 44 insertions(+), 62 deletions(-)
> > +
> > +diff --git a/target/linux/ar71xx/image/tp-link.mk
> > b/target/linux/ar71xx/image/tp-link.mk
> > +index 32d16f9..2557858 100644
> > +--- a/target/linux/ar71xx/image/tp-link.mk
> > ++++ b/target/linux/ar71xx/image/tp-link.mk
> > +@@ -26,11 +26,11 @@ endef
> > + # -c combined image
> > + define Build/mktplinkfw-combined
> > + $(STAGING_DIR_HOST)/bin/mktplinkfw \
> > +- -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F
> > $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) $(1) \
> > +- -m $(TPLINK_HEADER_VERSION) \
> > ++ -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -N OpenWrt
> > -V
> > $(REVISION) $(1) \
> > ++ -L $(KERNEL_LOADADDR) -m $(TPLINK_HEADER_VERSION)
> > \
> > ++ -E $(if
> > $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
> > + -k $@ \
> > + -o $@.new \
> > +- -s -S \
> > + -c
> > + @mv $@.new $@
> > + endef
> > +@@ -849,7 +849,6 @@ define Device/tl-wr1043nd-v4
> > + BOARDNAME := TL-WR1043ND-v4
> > + DEVICE_PROFILE := TLWR1043
> > + TPLINK_HWID := 0x10430004
> > +- TPLINK_FLASHLAYOUT := 16Msafeloader
> > + MTDPARTS := spi0.0:128k(u-
> > boot)ro,1536k(kernel),14016k(rootfs),128k(product-
> > info)ro,320k(config)ro,64k(partition-
> > table)ro,128k(logs)ro,64k(ART)ro,15552k at 0x20000(firmware)
> > + IMAGE_SIZE := 15552k
> > + TPLINK_BOARD_NAME := TLWR1043NDV4
> > +diff --git a/tools/firmware-utils/src/mktplinkfw.c
> > b/tools/firmware-
> > utils/src/mktplinkfw.c
> > +index fbf8960..3cfe5f7 100644
> > +--- a/tools/firmware-utils/src/mktplinkfw.c
> > ++++ b/tools/firmware-utils/src/mktplinkfw.c
> > +@@ -115,7 +115,6 @@ static uint32_t rootfs_align;
> > + static struct file_info boot_info;
> > + static int combined;
> > + static int strip_padding;
> > +-static int ignore_size;
> > + static int add_jffs2_eof;
> > + static unsigned char jffs2_eof_mark[4] = {0xde, 0xad, 0xc0,
> > 0xde};
> > + static uint32_t fw_max_len;
> > +@@ -178,20 +177,6 @@ static struct flash_layout layouts[] = {
> > + .kernel_ep = 0xc0000000,
> > + .rootfs_ofs = 0x2a0000,
> > + }, {
> > +- /*
> > +- Some devices (e.g. TL-WR1043 v4) use a
> > mktplinkfw kernel image
> > +- embedded in a tplink-safeloader image as
> > os-image partition.
> > +-
> > +- We use a 1.5MB partition for the
> > compressed
> > kernel, which should
> > +- be sufficient, but not too wasteful (the
> > flash of the TL-WR1043 v4
> > +- has 16MB in total).
> > +- */
> > +- .id = "16Msafeloader",
> > +- .fw_max_len = 0x180000,
> > +- .kernel_la = 0x80060000,
> > +- .kernel_ep = 0x80060000,
> > +- .rootfs_ofs = 0,
> > +- }, {
> > + /* terminating entry */
> > + }
> > + };
> > +@@ -268,7 +253,6 @@ static void usage(int status)
> > + " -R <offset> overwrite rootfs offset with <offset> (hexval
> > prefixed with 0x)\n"
> > + " -o <file> write output to the file <file>\n"
> > + " -s strip padding from the end of the image\n"
> > +-" -S ignore firmware size limit (only for combined
> > images)\n"
> > + " -j add jffs2 end-of-filesystem markers\n"
> > + " -N <vendor> set image vendor to <vendor>\n"
> > + " -V <version> set image version to <version>\n"
> > +@@ -358,7 +342,7 @@ static int check_options(void)
> > + }
> > + hw_id = strtoul(opt_hw_id, NULL, 0);
> > +
> > +- if (layout_id == NULL) {
> > ++ if (!combined && layout_id == NULL) {
> > + ERR("flash layout is not specified");
> > + return -1;
> > + }
> > +@@ -376,26 +360,31 @@ static int check_options(void)
> > + }
> > + }
> > +
> > +- layout = find_layout(layout_id);
> > +- if (layout == NULL) {
> > +- ERR("unknown flash layout \"%s\"", layout_id);
> > +- return -1;
> > +- }
> > ++ if (combined) {
> > ++ if (!kernel_la || !kernel_ep) {
> > ++ ERR("kernel loading address and entry
> > point
> > must be specified for combined image");
> > ++ return -1;
> > ++ }
> > ++ } else {
> > ++ layout = find_layout(layout_id);
> > ++ if (layout == NULL) {
> > ++ ERR("unknown flash layout \"%s\"",
> > layout_id);
> > ++ return -1;
> > ++ }
> > +
> > +- if (!kernel_la)
> > +- kernel_la = layout->kernel_la;
> > +- if (!kernel_ep)
> > +- kernel_ep = layout->kernel_ep;
> > +- if (!rootfs_ofs)
> > +- rootfs_ofs = layout->rootfs_ofs;
> > ++ if (!kernel_la)
> > ++ kernel_la = layout->kernel_la;
> > ++ if (!kernel_ep)
> > ++ kernel_ep = layout->kernel_ep;
> > ++ if (!rootfs_ofs)
> > ++ rootfs_ofs = layout->rootfs_ofs;
> > +
> > +- if (reserved_space > layout->fw_max_len) {
> > +- ERR("reserved space is not valid");
> > +- return -1;
> > ++ if (reserved_space > layout->fw_max_len) {
> > ++ ERR("reserved space is not valid");
> > ++ return -1;
> > ++ }
> > + }
> > +
> > +- fw_max_len = layout->fw_max_len - reserved_space;
> > +-
> > + if (kernel_info.file_name == NULL) {
> > + ERR("no kernel image specified");
> > + return -1;
> > +@@ -407,18 +396,9 @@ static int check_options(void)
> > +
> > + kernel_len = kernel_info.file_size;
> > +
> > +- if (combined) {
> > +- exceed_bytes = kernel_info.file_size -
> > (fw_max_len
> > - sizeof(struct fw_header));
> > +- if (exceed_bytes > 0) {
> > +- if (!ignore_size) {
> > +- ERR("kernel image is too big by
> > %i
> > bytes", exceed_bytes);
> > +- return -1;
> > +- }
> > +- layout->fw_max_len = sizeof(struct
> > fw_header) +
> > +- kernel_info.file_siz
> > e
> > +
> > +- reserved_space;
> > +- }
> > +- } else {
> > ++ if (!combined) {
> > ++ fw_max_len = layout->fw_max_len - reserved_space;
> > ++
> > + if (rootfs_info.file_name == NULL) {
> > + ERR("no rootfs image specified");
> > + return -1;
> > +@@ -490,17 +470,18 @@ static void fill_header(char *buf, int len)
> > + hdr->hw_id = htonl(hw_id);
> > + hdr->hw_rev = htonl(hw_rev);
> > +
> > +- if (boot_info.file_size == 0)
> > +- memcpy(hdr->md5sum1, md5salt_normal, sizeof(hdr-
> > > md5sum1));
> >
> > +- else
> > +- memcpy(hdr->md5sum1, md5salt_boot, sizeof(hdr-
> > > md5sum1));
> >
> > +-
> > + hdr->kernel_la = htonl(kernel_la);
> > + hdr->kernel_ep = htonl(kernel_ep);
> > +- hdr->fw_length = htonl(layout->fw_max_len);
> > + hdr->kernel_ofs = htonl(sizeof(struct fw_header));
> > + hdr->kernel_len = htonl(kernel_len);
> > ++
> > + if (!combined) {
> > ++ if (boot_info.file_size == 0)
> > ++ memcpy(hdr->md5sum1, md5salt_normal,
> > sizeof(hdr->md5sum1));
> > ++ else
> > ++ memcpy(hdr->md5sum1, md5salt_boot,
> > sizeof(hdr->md5sum1));
> > ++
> > ++ hdr->fw_length = htonl(layout->fw_max_len);
> > + hdr->rootfs_ofs = htonl(rootfs_ofs);
> > + hdr->rootfs_len = htonl(rootfs_info.file_size);
> > + }
> > +@@ -521,7 +502,8 @@ static void fill_header(char *buf, int len)
> > + );
> > + }
> > +
> > +- get_md5(buf, len, hdr->md5sum1);
> > ++ if (!combined)
> > ++ get_md5(buf, len, hdr->md5sum1);
> > + }
> > +
> > + static int pad_jffs2(char *buf, int currlen)
> > +@@ -598,7 +580,12 @@ static int build_fw(void)
> > + int ret = EXIT_FAILURE;
> > + int writelen = 0;
> > +
> > +- buflen = layout->fw_max_len;
> > ++ writelen = sizeof(struct fw_header) + kernel_len;
> > ++
> > ++ if (combined)
> > ++ buflen = writelen;
> > ++ else
> > ++ buflen = layout->fw_max_len;
> > +
> > + buf = malloc(buflen);
> > + if (!buf) {
> > +@@ -612,7 +599,6 @@ static int build_fw(void)
> > + if (ret)
> > + goto out_free_buf;
> > +
> > +- writelen = sizeof(struct fw_header) + kernel_len;
> > +
> > + if (!combined) {
> > + if (rootfs_align)
> > +@@ -805,7 +791,7 @@ int main(int argc, char *argv[])
> > + while ( 1 ) {
> > + int c;
> > +
> > +- c = getopt(argc, argv,
> > "a:H:E:F:L:m:V:N:W:C:ci:k:r:R:o:xX:hsSjv:");
> > ++ c = getopt(argc, argv,
> > "a:H:E:F:L:m:V:N:W:C:ci:k:r:R:o:xX:ehsjv:");
> > + if (c == -1)
> > + break;
> > +
> > +@@ -861,9 +847,6 @@ int main(int argc, char *argv[])
> > + case 's':
> > + strip_padding = 1;
> > + break;
> > +- case 'S':
> > +- ignore_size = 1;
> > +- break;
> > + case 'i':
> > + inspect_info.file_name = optarg;
> > + break;
> > +--
> > +2.7.4
> > +
> > diff --git a/build_patches/openwrt/0012-build-move-mktplinkfw-
> > combined-command-to-image-comm.patch b/build_patches/openwrt/0012-
> > build-move-mktplinkfw-combined-command-to-image-comm.patch
> > new file mode 100644
> > index 0000000..4c29e3b
> > --- /dev/null
> > +++ b/build_patches/openwrt/0012-build-move-mktplinkfw-combined-
> > command-to-image-comm.patch
> > @@ -0,0 +1,103 @@
> > +From f08f754993d5e9a1952400528ce5405910d1d1a4 Mon Sep 17 00:00:00
> > 2001
> > +From: Piotr Dymacz <pepe2k at gmail.com>
> > +Date: Thu, 6 Jul 2017 18:10:22 +0200
> > +Subject: [PATCH] build: move mktplinkfw-combined command to image-
> > commands.mk
> > +
> > +We will need "mktplinkfw-combined" command also in the "ramips"
> > target
> > +for new MediaTek based TP-Link devices, with "safeloader" image
> > type.
> > +
> > +Also, rename the command to "tplink-v1-header", use "VERSION_DIST"
> > +variable instead of "OpenWrt" and allow passing additional
> > parameters.
> > +
> > +Signed-off-by: Piotr Dymacz <pepe2k at gmail.com>
> > +[Rebased on 8ad1b09]
> > +Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> > +---
> > + include/image-commands.mk | 9 +++++++++
> > + target/linux/ar71xx/image/tp-link.mk | 22 ++++------------------
> > + 2 files changed, 13 insertions(+), 18 deletions(-)
> > +
> > +diff --git a/include/image-commands.mk b/include/image-commands.mk
> > +index 04fa853..9e56ab8 100644
> > +--- a/include/image-commands.mk
> > ++++ b/include/image-commands.mk
> > +@@ -165,6 +165,15 @@ define Build/combined-image
> > + @mv $@.new $@
> > + endef
> > +
> > ++define Build/tplink-v1-header
> > ++ $(STAGING_DIR_HOST)/bin/mktplinkfw \
> > ++ -c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L
> > $(KERNEL_LOADADDR) \
> > ++ -E $(if
> > $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
> > ++ -m $(TPLINK_HEADER_VERSION) -N "$(VERSION_DIST)"
> > -V
> > $(REVISION) \
> > ++ -k $@ -o $@.new $(1)
> > ++ @mv $@.new $@
> > ++endef
> > ++
> > + define Build/sysupgrade-tar
> > + sh $(TOPDIR)/scripts/sysupgrade-tar.sh \
> > + --board $(if
> > $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)) \
> > +diff --git a/target/linux/ar71xx/image/tp-link.mk
> > b/target/linux/ar71xx/image/tp-link.mk
> > +index 2557858..685b09e 100644
> > +--- a/target/linux/ar71xx/image/tp-link.mk
> > ++++ b/target/linux/ar71xx/image/tp-link.mk
> > +@@ -21,20 +21,6 @@ define Build/mktplinkfw
> > + $(if $(findstring sysupgrade,$(word 1,$(1))),-s)
> > &&
> > mv $@.new $@ || rm -f $@
> > + endef
> > +
> > +-# mktplinkfw-combined
> > +-#
> > +-# -c combined image
> > +-define Build/mktplinkfw-combined
> > +- $(STAGING_DIR_HOST)/bin/mktplinkfw \
> > +- -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -N OpenWrt
> > -V
> > $(REVISION) $(1) \
> > +- -L $(KERNEL_LOADADDR) -m $(TPLINK_HEADER_VERSION)
> > \
> > +- -E $(if
> > $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
> > +- -k $@ \
> > +- -o $@.new \
> > +- -c
> > +- @mv $@.new $@
> > +-endef
> > +-
> > + # add RE450 and similar header to the kernel image
> > + define Build/mktplinkfw-kernel
> > + $(STAGING_DIR_HOST)/bin/mktplinkfw-kernel \
> > +@@ -58,7 +44,7 @@ define Device/tplink
> > + TPLINK_HEADER_VERSION := 1
> > + LOADER_TYPE := gz
> > + KERNEL := kernel-bin | patch-cmdline | lzma
> > +- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma |
> > mktplinkfw-combined
> > ++ KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-
> > v1-header
> > + IMAGES := sysupgrade.bin factory.bin
> > + IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade
> > + IMAGE/factory.bin := append-rootfs | mktplinkfw factory
> > +@@ -70,7 +56,7 @@ $(Device/tplink)
> > + COMPILE := loader-$(1).gz
> > + COMPILE/loader-$(1).gz := loader-okli-compile
> > + KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M
> > 0x4f4b4c49 | loader-okli $(1)
> > +- KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-
> > initramfs.bin.lzma
> > > loader-kernel-cmdline | mktplinkfw-combined
> >
> > ++ KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-
> > initramfs.bin.lzma
> > > loader-kernel-cmdline | tplink-v1-header
> >
> > + endef
> > +
> > + define Device/tplink-4m
> > +@@ -249,7 +235,7 @@ $(Device/tplink-8mlzma)
> > + DEVICE_TITLE := TP-LINK TL-WDR6500v2
> > + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-
> > usbport kmod-ath10k ath10k-firmware-qca988x
> > + KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
> > +- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage
> > lzma | mktplinkfw-combined
> > ++ KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage
> > lzma | tplink-v1-header
> > + BOARDNAME = TL-WDR6500-v2
> > + DEVICE_PROFILE = TLWDR6500V2
> > + TPLINK_HWID := 0x65000002
> > +@@ -852,7 +838,7 @@ define Device/tl-wr1043nd-v4
> > + MTDPARTS := spi0.0:128k(u-
> > boot)ro,1536k(kernel),14016k(rootfs),128k(product-
> > info)ro,320k(config)ro,64k(partition-
> > table)ro,128k(logs)ro,64k(ART)ro,15552k at 0x20000(firmware)
> > + IMAGE_SIZE := 15552k
> > + TPLINK_BOARD_NAME := TLWR1043NDV4
> > +- KERNEL := kernel-bin | patch-cmdline | lzma | mktplinkfw-
> > combined
> > ++ KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-
> > header
> > + IMAGES := sysupgrade.bin factory.bin
> > + IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader
> > sysupgrade
> > + IMAGE/factory.bin := append-rootfs | tplink-safeloader
> > factory
> > +--
> > +2.7.4
> > +
> > diff --git a/build_patches/openwrt/0013-ar71xx-add-support-for-TL-
> > WR1043N-v5.0.patch b/build_patches/openwrt/0013-ar71xx-add-support-
> > for-TL-WR1043N-v5.0.patch
> > new file mode 100644
> > index 0000000..24397dc
> > --- /dev/null
> > +++ b/build_patches/openwrt/0013-ar71xx-add-support-for-TL-WR1043N-
> > v5.0.patch
> > @@ -0,0 +1,697 @@
> > +From 857e26a395a446da7b6bb3a1056ef3fb8d85cf65 Mon Sep 17 00:00:00
> > 2001
> > +From: majik-sheff <tim at tfthorpe.net>
> > +Date: Mon, 25 Sep 2017 04:38:49 -0500
> > +Subject: [PATCH] ar71xx: add support for TL-WR1043N v5.0
> > +MIME-Version: 1.0
> > +Content-Type: text/plain; charset=UTF-8
> > +Content-Transfer-Encoding: 8bit
> > +
> > +The hardware of the TP-Link WR-1043N v5 appears
> > +to be to almost identical to the WR-1043NDv4, except
> > +that the USB port has been removed and there is no
> > +longer a removeable antenna option.
> > +
> > +The software is more in line with the Archer series in
> > +that is uses a nested bootloader scheme. The factory
> > +image should install from the stock interface.
> > +
> > +Set your Ethernet adapter to 192.168.0.10. Enable your TFTP
> > +server with the firmware image in the root named fw.bin
> > +(can be any name, just change the tftp command that comes later)
> > +When the router starts its boot process,
> > +press “enter” to interrupt auto boot.
> > +
> > +Enter the following commands:
> > +tftp 0x80060000 fw.bin
> > +erase 0x9f040000 +${filesize}
> > +cp.b 0x80060000 0x9f040000 ${filesize}
> > +reset
> > +
> > +Signed-off-by: Tim Thorpe <tim at tfthorpe.net>
> > +[Rebased on 8ad1b09, Fixed TPLINK_BOARD_NAME]
> > +Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> > +---
> > + target/linux/ar71xx/base-files/etc/board.d/01_leds | 10 +-
> > + .../linux/ar71xx/base-files/etc/board.d/02_network | 4 +
> > + target/linux/ar71xx/base-files/etc/diag.sh | 1 +
> > + .../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 24 ++
> > + target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
> > + .../ar71xx/base-files/lib/upgrade/platform.sh | 2 +
> > + target/linux/ar71xx/config-4.4 | 1 +
> > + .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 10 +
> > + .../files/arch/mips/ath79/mach-tl-wr1043nd-v4.c | 316
> > +++++++++++++--------
> > + .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
> > + target/linux/ar71xx/image/tp-link.mk | 17 +-
> > + target/linux/ar71xx/mikrotik/config-default | 1 +
> > + target/linux/ar71xx/nand/config-default | 1 +
> > + tools/firmware-utils/src/tplink-safeloader.c | 39 ++-
> > + 14 files changed, 310 insertions(+), 120 deletions(-)
> > + create mode 100644 target/linux/ar71xx/base-
> > files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
> > +
> > +diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > +index e1efb56..5f58701 100755
> > +--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > ++++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> > +@@ -666,14 +666,20 @@ tl-wr1043nd-v2)
> > + ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-
> > 1"
> > + ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan"
> > "phy0tpt"
> > + ;;
> > +-tl-wr1043nd-v4)
> > +- ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-
> > 1"
> > ++tl-wr1043nd-v4|\
> > ++tl-wr1043n-v5)
> > + ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan"
> > "phy0tpt"
> > + ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan"
> > "switch0" "0x20"
> > + ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1"
> > "switch0" "0x10"
> > + ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2"
> > "switch0" "0x08"
> > + ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3"
> > "switch0" "0x04"
> > + ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4"
> > "switch0" "0x02"
> > ++
> > ++ case "$board" in
> > ++ tl-wr1043nd-v4)
> > ++ ucidef_set_led_usbdev "usb" "USB" "tp-
> > link:green:usb" "1-1"
> > ++ ;;
> > ++ esac
> > + ;;
> > + tl-wr2543n)
> > + ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-
> > 1"
> > +diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network
> > b/target/linux/ar71xx/base-files/etc/board.d/02_network
> > +index 24ead87..e7a1702 100755
> > +--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
> > ++++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
> > +@@ -235,6 +235,7 @@ ar71xx_setup_interfaces()
> > + dir-835-a1|\
> > + esr900|\
> > + mynet-n750|\
> > ++ tl-wr1043n-v5|\
> > + sr3200|\
> > + wndr3700v4|\
> > + wndr4300)
> > +@@ -485,6 +486,9 @@ ar71xx_setup_macs()
> > + lan_mac=$(mtd_get_mac_binary product-info 8)
> > + wan_mac=$(macaddr_add "$lan_mac" 1)
> > + ;;
> > ++ tl-wr1043n-v5)
> > ++ wan_mac=$(macaddr_add $(mtd_get_mac_binary
> > product-
> > info 8) 1)
> > ++ ;;
> > + esr900)
> > + wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
> > + ;;
> > +diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
> > b/target/linux/ar71xx/base-files/etc/diag.sh
> > +index 38cc5d7..ec0c720 100644
> > +--- a/target/linux/ar71xx/base-files/etc/diag.sh
> > ++++ b/target/linux/ar71xx/base-files/etc/diag.sh
> > +@@ -362,6 +362,7 @@ get_status_led() {
> > + tl-wr1043nd|\
> > + tl-wr1043nd-v2|\
> > + tl-wr1043nd-v4|\
> > ++ tl-wr1043n-v5|\
> > + tl-wr741nd|\
> > + tl-wr741nd-v4|\
> > + tl-wa801nd-v3|\
> > +diff --git a/target/linux/ar71xx/base-
> > files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
> > b/target/linux/ar71xx/base-
> > files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
> > +new file mode 100644
> > +index 0000000..4b0922f
> > +--- /dev/null
> > ++++ b/target/linux/ar71xx/base-
> > files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
> > +@@ -0,0 +1,24 @@
> > ++#!/bin/ash
> > ++
> > ++[ "$ACTION" == "add" ] || exit 0
> > ++
> > ++PHYNBR=${DEVPATH##*/phy}
> > ++
> > ++[ -n $PHYNBR ] || exit 0
> > ++
> > ++. /lib/functions.sh
> > ++. /lib/functions/system.sh
> > ++
> > ++board=$(board_name)
> > ++
> > ++case "$board" in
> > ++ archer-c58-v1)
> > ++ echo $(macaddr_add $(mtd_get_mac_binary mac
> > 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
> > ++ ;;
> > ++ tl-wr1043n-v5)
> > ++ echo $(macaddr_add $(mtd_get_mac_binary product-
> > info 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
> > ++ ;;
> > ++ *)
> > ++ ;;
> > ++esac
> > ++
> > +diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > +index 46711af..de6042b 100755
> > +--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > ++++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> > +@@ -944,6 +944,9 @@ ar71xx_board_detect() {
> > + *"TL-WR1043ND v4")
> > + name="tl-wr1043nd-v4"
> > + ;;
> > ++ *"TL-WR1043N v5")
> > ++ name="tl-wr1043n-v5"
> > ++ ;;
> > + *TL-WR2543N*)
> > + name="tl-wr2543n"
> > + ;;
> > +diff --git a/target/linux/ar71xx/base-
> > files/lib/upgrade/platform.sh
> > b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > +index e65f6e2..ec8e989 100755
> > +--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > ++++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> > +@@ -261,6 +261,7 @@ platform_check_image() {
> > + tew-712br|\
> > + tew-732br|\
> > + tew-823dru|\
> > ++ tl-wr1043n-v5|\
> > + unifi-outdoor|\
> > + unifiac-lite|\
> > + unifiac-pro|\
> > +@@ -291,6 +292,7 @@ platform_check_image() {
> > + ;;
> > + alfa-ap96|\
> > + alfa-nx|\
> > ++ tl-wr1043n-v5|\
> > + ap121-mini|\
> > + ap121|\
> > + ap135-020|\
> > +diff --git a/target/linux/ar71xx/config-4.4
> > b/target/linux/ar71xx/config-4.4
> > +index 0187775..4cf0c6f 100644
> > +--- a/target/linux/ar71xx/config-4.4
> > ++++ b/target/linux/ar71xx/config-4.4
> > +@@ -181,6 +181,7 @@ CONFIG_ATH79_MACH_TL_WR1041N_V2=y
> > + CONFIG_ATH79_MACH_TL_WR1043ND=y
> > + CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
> > + CONFIG_ATH79_MACH_TL_WR1043ND_V4=y
> > ++CONFIG_ATH79_MACH_TL_WR1043N_V5=y
> > + CONFIG_ATH79_MACH_TL_WR2543N=y
> > + CONFIG_ATH79_MACH_TL_WR703N=y
> > + CONFIG_ATH79_MACH_TL_WR720N_V3=y
> > +diff --git
> > a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> > b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> > +index 4112fd3..94f25ee 100644
> > +--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> > ++++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> > +@@ -1596,6 +1596,16 @@ config ATH79_MACH_TL_WR1043ND_V4
> > + select ATH79_DEV_USB
> > + select ATH79_DEV_WMAC
> > +
> > ++config ATH79_MACH_TL_WR1043N_V5
> > ++ bool "TP-LINK TL-WR1043N v5 support"
> > ++ select SOC_QCA956X
> > ++ select ATH79_DEV_GPIO_BUTTONS
> > ++ select ATH79_DEV_LEDS_GPIO
> > ++ select ATH79_DEV_SPI
> > ++ select ATH79_DEV_WMAC
> > ++ select ATH79_DEV_ETH
> > ++ select ATH79_DEV_M25P80
> > ++
> > + config ATH79_MACH_TL_WR2543N
> > + bool "TP-LINK TL-WR2543N/ND support"
> > + select SOC_AR724X
> > +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-
> > wr1043nd-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-
> > wr1043nd-v4.c
> > +index b1539c5..53a82d2 100644
> > +--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-
> > v4.c
> > ++++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-
> > v4.c
> > +@@ -5,6 +5,7 @@
> > + * Copyright (C) 2016 Matthias Schiffer <mschiffer at universe-fact
> > or
> > y.net>
> > + * Copyright (C) 2016 Andreas Ziegler <github at andreas-ziegler.de
> > >
> > + * Copyright (C) 2016 Ludwig Thomeczek <ledesrc at wxorx.net>
> > ++ * Copyright (c) 2017 Tim Thorpe <tim at tfthorpe.net>
> > + *
> > + * Derived from: mach-dir-869-a1.c
> > + *
> > +@@ -38,153 +39,236 @@
> > + #include "machtypes.h"
> > + #include "nvram.h"
> > +
> > +-#define TL_WR1043_V4_GPIO_BTN_RESET 2
> > +-#define TL_WR1043_V4_GPIO_BTN_RFKILL 5
> > ++#define TL_WR1043_V4_GPIO_BTN_RESET 2
> > ++#define TL_WR1043_V4_GPIO_BTN_RFKILL 5
> > +
> > +-#define TL_WR1043_V4_GPIO_LED_WLAN 19
> > +-#define TL_WR1043_V4_GPIO_LED_USB 7
> > +-#define TL_WR1043_V4_GPIO_LED_WPS 1
> > +-#define TL_WR1043_V4_GPIO_LED_SYSTEM 6
> > ++#define TL_WR1043_V4_GPIO_LED_WLAN 19
> > ++#define TL_WR1043_V4_GPIO_LED_USB 7
> > ++#define TL_WR1043_V4_GPIO_LED_WPS 1
> > ++#define TL_WR1043_V4_GPIO_LED_SYSTEM 6
> > +
> > +-#define TL_WR1043_V4_GPIO_USB_POWER 8
> > ++#define TL_WR1043_V4_GPIO_USB_POWER 8
> > +
> > +-#define TL_WR1043_V4_GPIO_LED_WAN 15
> > +-#define TL_WR1043_V4_GPIO_LED_LAN1 9
> > +-#define TL_WR1043_V4_GPIO_LED_LAN2 14
> > +-#define TL_WR1043_V4_GPIO_LED_LAN3 21
> > +-#define TL_WR1043_V4_GPIO_LED_LAN4 20
> > ++#define TL_WR1043_V4_GPIO_LED_WAN 15
> > ++#define TL_WR1043_V5_GPIO_LED_WAN_ORANGE 16
> > ++#define TL_WR1043_V4_GPIO_LED_LAN1 9
> > ++#define TL_WR1043_V4_GPIO_LED_LAN2 14
> > ++#define TL_WR1043_V4_GPIO_LED_LAN3 21
> > ++#define TL_WR1043_V4_GPIO_LED_LAN4 20
> > +
> > +-#define TL_WR1043_V4_KEYS_POLL_INTERVAL 20 /*
> > msecs
> > */
> > +-#define TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL (3 *
> > TL_WR1043_V4_KEYS_POLL_INTERVAL)
> > ++#define TL_WR1043_V4_KEYS_POLL_INTERVAL 20 /* msecs */
> > ++#define TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL (3 *
> > TL_WR1043_V4_KEYS_POLL_INTERVAL)
> > +
> > +-#define TL_WR1043_V4_MAC_LOCATION 0x1ff50008
> > +-
> > +-#define TL_WR1043_V4_EEPROM_ADDR 0x1fff0000
> > +-#define TL_WR1043_V4_WMAC_CALDATA_OFFSET 0x1000
> > ++#define TL_WR1043_V4_MAC_LOCATION 0x1ff50008
> > ++#define TL_WR1043_V4_EEPROM_ADDR 0x1fff0000
> > ++#define TL_WR1043_V4_WMAC_CALDATA_OFFSET 0x1000
> > ++#define TL_WR1043_V5_MAC_LOCATION 0x1ff00008
> > ++#define TL_WR1043_V5_DEF_PIN_LOCATION 0x1ff00208
> > ++#define TL_WR1043_V5_TPLINK_XML_LOCATION 0x1ff1c008
> > +
> > + static struct gpio_led tl_wr1043nd_v4_leds_gpio[] __initdata = {
> > +- {
> > +- .name = "tp-link:green:wps",
> > +- .gpio = TL_WR1043_V4_GPIO_LED_WPS,
> > +- .active_low = 1,
> > +- },
> > +- {
> > +- .name = "tp-link:green:system",
> > +- .gpio =
> > TL_WR1043_V4_GPIO_LED_SYSTEM,
> > +- .active_low = 1,
> > +- },
> > +- {
> > +- .name = "tp-link:green:wlan",
> > +- .gpio =
> > TL_WR1043_V4_GPIO_LED_WLAN,
> > +- .active_low = 1,
> > +- },
> > +- {
> > +- .name = "tp-link:green:usb",
> > +- .gpio = TL_WR1043_V4_GPIO_LED_USB,
> > +- .active_low = 1,
> > +- },
> > +- {
> > +- .name = "tp-link:green:wan",
> > +- .gpio = TL_WR1043_V4_GPIO_LED_WAN,
> > +- .active_low = 1,
> > +- },
> > +- {
> > +- .name = "tp-link:green:lan1",
> > +- .gpio =
> > TL_WR1043_V4_GPIO_LED_LAN1,
> > +- .active_low = 1,
> > +- },
> > +- {
> > +- .name = "tp-link:green:lan2",
> > +- .gpio =
> > TL_WR1043_V4_GPIO_LED_LAN2,
> > +- .active_low = 1,
> > +- },
> > +- {
> > +- .name = "tp-link:green:lan3",
> > +- .gpio =
> > TL_WR1043_V4_GPIO_LED_LAN3,
> > +- .active_low = 1,
> > +- },
> > +- {
> > +- .name = "tp-link:green:lan4",
> > +- .gpio =
> > TL_WR1043_V4_GPIO_LED_LAN4,
> > +- .active_low = 1,
> > +- },
> > ++ {
> > ++ .name = "tp-link:green:wps",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_WPS,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:system",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_SYSTEM,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:wlan",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_WLAN,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:usb",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_USB,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:wan",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_WAN,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:lan1",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_LAN1,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:lan2",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_LAN2,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:lan3",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_LAN3,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:lan4",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_LAN4,
> > ++ .active_low = 1,
> > ++ },
> > + };
> > +
> > + static struct gpio_keys_button tl_wr1043nd_v4_gpio_keys[]
> > __initdata = {
> > +- {
> > +- .desc = "Reset button",
> > +- .type = EV_KEY,
> > +- .code = KEY_RESTART,
> > +- .debounce_interval =
> > TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL,
> > +- .gpio =
> > TL_WR1043_V4_GPIO_BTN_RESET,
> > +- .active_low = 1,
> > +- },
> > +- {
> > +- .desc = "RFKILL button",
> > +- .type = EV_KEY,
> > +- .code = KEY_RFKILL,
> > +- .debounce_interval =
> > TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL,
> > +- .gpio =
> > TL_WR1043_V4_GPIO_BTN_RFKILL,
> > +- .active_low = 1,
> > +- },
> > ++ {
> > ++ .desc = "Reset button",
> > ++ .type = EV_KEY,
> > ++ .code = KEY_RESTART,
> > ++ .debounce_interval = TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL,
> > ++ .gpio = TL_WR1043_V4_GPIO_BTN_RESET,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .desc = "RFKILL button",
> > ++ .type = EV_KEY,
> > ++ .code = KEY_RFKILL,
> > ++ .debounce_interval = TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL,
> > ++ .gpio = TL_WR1043_V4_GPIO_BTN_RFKILL,
> > ++ .active_low = 1,
> > ++ },
> > + };
> > +
> > + static struct ar8327_pad_cfg tl_wr1043nd_v4_ar8327_pad0_cfg = {
> > +- .mode = AR8327_PAD_MAC_SGMII,
> > +- .sgmii_delay_en = true,
> > ++ .mode = AR8327_PAD_MAC_SGMII,
> > ++ .sgmii_delay_en = true,
> > + };
> > +
> > + static struct ar8327_platform_data tl_wr1043nd_v4_ar8327_data = {
> > +- .pad0_cfg = &tl_wr1043nd_v4_ar8327_pad0_cfg,
> > +- .port0_cfg = {
> > +- .force_link = 1,
> > +- .speed = AR8327_PORT_SPEED_1000,
> > +- .duplex = 1,
> > +- .txpause = 1,
> > +- .rxpause = 1,
> > +- },
> > ++ .pad0_cfg = &tl_wr1043nd_v4_ar8327_pad0_cfg,
> > ++ .port0_cfg = {
> > ++ .force_link = 1,
> > ++ .speed = AR8327_PORT_SPEED_1000,
> > ++ .duplex = 1,
> > ++ .txpause = 1,
> > ++ .rxpause = 1,
> > ++ },
> > + };
> > +
> > + static struct mdio_board_info tl_wr1043nd_v4_mdio0_info[] = {
> > +- {
> > +- .bus_id = "ag71xx-mdio.0",
> > +- .phy_addr = 0,
> > +- .platform_data = &tl_wr1043nd_v4_ar8327_data,
> > +- },
> > ++ {
> > ++ .bus_id = "ag71xx-mdio.0",
> > ++ .phy_addr = 0,
> > ++ .platform_data = &tl_wr1043nd_v4_ar8327_data,
> > ++ },
> > + };
> > +
> > + static void __init tl_wr1043nd_v4_setup(void)
> > + {
> > +- u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043_V4_MAC_LOCATION);
> > +- u8 *eeprom = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR);
> > ++ u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043_V4_MAC_LOCATION);
> > ++ u8 *eeprom = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR);
> > +
> > +- ath79_register_m25p80(NULL);
> > ++ ath79_register_m25p80(NULL);
> > +
> > +- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
> > +- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
> > +- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
> > +- ath79_eth0_data.phy_mask = BIT(0);
> > ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
> > ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
> > ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
> > ++ ath79_eth0_data.phy_mask = BIT(0);
> > +
> > +- mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info,
> > +- ARRAY_SIZE(tl_wr1043nd_v4_mdi
> > o0
> > _info));
> > ++ mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info,
> > ++ ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info
> > ))
> > ;
> > +
> > +- ath79_register_usb();
> > +- ath79_register_mdio(0, 0);
> > +- ath79_register_eth(0);
> > ++ ath79_register_usb();
> > ++ ath79_register_mdio(0, 0);
> > ++ ath79_register_eth(0);
> > +
> > +- ath79_register_wmac(eeprom +
> > TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac);
> > ++ ath79_register_wmac(eeprom + TL_WR1043_V4_WMAC_CALDATA_OFFSET,
> > mac);
> > +
> > +- ath79_register_leds_gpio(-1,
> > ARRAY_SIZE(tl_wr1043nd_v4_leds_gpio),
> > +- tl_wr1043nd_v4_leds_gpio);
> > ++ ath79_register_leds_gpio(-1,
> > ARRAY_SIZE(tl_wr1043nd_v4_leds_gpio),
> > ++ tl_wr1043nd_v4_leds_gpio);
> > +
> > +- ath79_register_gpio_keys_polled(-1,
> > TL_WR1043_V4_KEYS_POLL_INTERVAL,
> > +- ARRAY_SIZE(tl_wr1043nd_v4
> > _g
> > pio_keys),
> > +- tl_wr1043nd_v4_gpio_keys)
> > ;
> > ++ ath79_register_gpio_keys_polled(-1,
> > TL_WR1043_V4_KEYS_POLL_INTERVAL,
> > ++ ARRAY_SIZE(tl_wr1043nd_v4_gpio_k
> > ey
> > s),
> > ++ tl_wr1043nd_v4_gpio_keys);
> > +
> > +- gpio_request_one(TL_WR1043_V4_GPIO_USB_POWER,
> > +- GPIOF_OUT_INIT_HIGH |
> > GPIOF_EXPORT_DIR_FIXED,
> > +- "USB power");
> > ++ gpio_request_one(TL_WR1043_V4_GPIO_USB_POWER,
> > ++ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
> > ++ "USB power");
> > + }
> > +
> > + MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V4, "TL-WR1043ND-v4",
> > +- "TP-LINK TL-WR1043ND v4", tl_wr1043nd_v4_setup);
> > ++ "TP-LINK TL-WR1043ND v4", tl_wr1043nd_v4_setup);
> > ++
> > ++static struct gpio_led tl_wr1043n_v5_leds_gpio[] __initdata = {
> > ++ {
> > ++ .name = "tp-link:green:system",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_SYSTEM,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:wlan",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_WLAN,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:wan",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_WAN,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:orange:wan",
> > ++ .gpio = TL_WR1043_V5_GPIO_LED_WAN_ORANGE,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:lan1",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_LAN1,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:lan2",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_LAN2,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:lan3",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_LAN3,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:lan4",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_LAN4,
> > ++ .active_low = 1,
> > ++ },
> > ++ {
> > ++ .name = "tp-link:green:wps",
> > ++ .gpio = TL_WR1043_V4_GPIO_LED_WPS,
> > ++ .active_low = 1,
> > ++ },
> > ++};
> > ++
> > ++/* The 1043Nv5 is identical to the 1043NDv4, only missing the usb
> > and small firmware layout changes */
> > ++static void __init tl_wr1043nv5_setup(void)
> > ++{
> > ++ u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043_V5_MAC_LOCATION);
> > ++ u8 *eeprom = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR);
> > ++
> > ++ ath79_register_m25p80(NULL);
> > ++
> > ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
> > ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
> > ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
> > ++ ath79_eth0_data.phy_mask = BIT(0);
> > ++
> > ++ mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info,
> > ++ ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info
> > ))
> > ;
> > ++
> > ++ ath79_register_mdio(0, 0);
> > ++ ath79_register_eth(0);
> > ++
> > ++ ath79_register_wmac(eeprom + TL_WR1043_V4_WMAC_CALDATA_OFFSET,
> > mac);
> > ++
> > ++ ath79_register_leds_gpio(-1,
> > ARRAY_SIZE(tl_wr1043n_v5_leds_gpio),
> > ++ tl_wr1043n_v5_leds_gpio);
> > ++
> > ++ ath79_register_gpio_keys_polled(-1,
> > TL_WR1043_V4_KEYS_POLL_INTERVAL,
> > ++ ARRAY_SIZE(tl_wr1043nd_v4_gpio_k
> > ey
> > s),
> > ++ tl_wr1043nd_v4_gpio_keys);
> > ++}
> > ++
> > ++MIPS_MACHINE(ATH79_MACH_TL_WR1043N_V5, "TL-WR1043N-v5", "TP-LINK
> > TL-WR1043N v5",
> > ++ tl_wr1043nv5_setup);
> > +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > +index 8864e0d..11fc236 100644
> > +--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > ++++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> > +@@ -217,6 +217,7 @@ enum ath79_mach_type {
> > + ATH79_MACH_TL_WR1043ND, /* TP-LINK
> > TL-WR1043ND */
> > + ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-
> > WR1043ND v2 */
> > + ATH79_MACH_TL_WR1043ND_V4, /* TP-LINK TL-
> > WR1043ND v4 */
> > ++ ATH79_MACH_TL_WR1043N_V5, /* TP-LINK TL-
> > WR1043N v5 */
> > + ATH79_MACH_TL_WR2543N, /* TP-LINK
> > TL-WR2543N/ND */
> > + ATH79_MACH_TL_WR703N, /* TP-LINK
> > TL-
> > WR703N */
> > + ATH79_MACH_TL_WR710N, /* TP-LINK
> > TL-
> > WR710N */
> > +diff --git a/target/linux/ar71xx/image/tp-link.mk
> > b/target/linux/ar71xx/image/tp-link.mk
> > +index 685b09e..61ebb09 100644
> > +--- a/target/linux/ar71xx/image/tp-link.mk
> > ++++ b/target/linux/ar71xx/image/tp-link.mk
> > +@@ -843,7 +843,22 @@ define Device/tl-wr1043nd-v4
> > + IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader
> > sysupgrade
> > + IMAGE/factory.bin := append-rootfs | tplink-safeloader
> > factory
> > + endef
> > +-TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3
> > tl-
> > wr1043nd-v4
> > ++define Device/tl-wr1043n-v5
> > ++ $(Device/tplink)
> > ++ DEVICE_TITLE := TP-LINK TL-WR1043N v5
> > ++ BOARDNAME := TL-WR1043N-v5
> > ++ DEVICE_PROFILE := TLWR1043
> > ++ TPLINK_HWID := 0x10430005
> > ++ MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-
> > boot)ro,1536k(kernel),13568k(rootfs),128k(product-
> > info)ro,640k(config)ro,64k(partition-
> > table)ro,128k(logs)ro,64k(ART)ro,15104k at 0x40000(firmware)
> > ++ IMAGE_SIZE := 15104k
> > ++ TPLINK_BOARD_NAME := TLWR1043NV5
> > ++ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
> > ++ IMAGES := sysupgrade.bin factory.bin
> > ++ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader
> > sysupgrade | \
> > ++ append-metadata | check-size $$$$(IMAGE_SIZE)
> > ++ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
> > ++endef
> > ++TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3
> > tl-
> > wr1043nd-v4 tl-wr1043n-v5
> > +
> > + define Device/tl-wr2543-v1
> > + $(Device/tplink-8mlzma)
> > +diff --git a/target/linux/ar71xx/mikrotik/config-default
> > b/target/linux/ar71xx/mikrotik/config-default
> > +index 376835a..878f7e8 100644
> > +--- a/target/linux/ar71xx/mikrotik/config-default
> > ++++ b/target/linux/ar71xx/mikrotik/config-default
> > +@@ -146,6 +146,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
> > + # CONFIG_ATH79_MACH_TL_WR1043ND is not set
> > + # CONFIG_ATH79_MACH_TL_WR1043ND_V2 is not set
> > + # CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set
> > ++# CONFIG_ATH79_MACH_TL_WR1043N_V5 is not set
> > + # CONFIG_ATH79_MACH_TL_WR2543N is not set
> > + # CONFIG_ATH79_MACH_TL_WR703N is not set
> > + # CONFIG_ATH79_MACH_TL_WR720N_V3 is not set
> > +diff --git a/target/linux/ar71xx/nand/config-default
> > b/target/linux/ar71xx/nand/config-default
> > +index 62be218..0ccbb4c 100644
> > +--- a/target/linux/ar71xx/nand/config-default
> > ++++ b/target/linux/ar71xx/nand/config-default
> > +@@ -54,6 +54,7 @@
> > + # CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set
> > + # CONFIG_ATH79_MACH_TL_WR1043ND is not set
> > + # CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set
> > ++# CONFIG_ATH79_MACH_TL_WR1043N_V5 is not set
> > + # CONFIG_ATH79_MACH_TL_WR2543N is not set
> > + # CONFIG_ATH79_MACH_TL_WR703N is not set
> > + # CONFIG_ATH79_MACH_TL_WR720N_V3 is not set
> > +diff --git a/tools/firmware-utils/src/tplink-safeloader.c
> > b/tools/firmware-utils/src/tplink-safeloader.c
> > +index 2468426..72263a4 100644
> > +--- a/tools/firmware-utils/src/tplink-safeloader.c
> > ++++ b/tools/firmware-utils/src/tplink-safeloader.c
> > +@@ -478,6 +478,42 @@ static struct device_info boards[] = {
> > + .last_sysupgrade_partition = "file-system"
> > + },
> > +
> > ++ /** Firmware layout for the TL-WR1043 v5 */
> > ++ {
> > ++ .id = "TLWR1043NV5",
> > ++ .vendor = "",
> > ++ .support_list =
> > ++ "SupportList:\n"
> > ++ "{product_name:TL-
> > WR1043N,product_ver:5.0.0,special_id:45550000}\n"
> > ++ "{product_name:TL-
> > WR1043N,product_ver:5.0.0,special_id:55530000}\n",
> > ++ .support_trail = '\x00',
> > ++ .soft_ver = "soft_ver:1.0.0\n",
> > ++ .partitions = {
> > ++ {"factory-boot", 0x00000, 0x20000},
> > ++ {"fs-uboot", 0x20000, 0x20000},
> > ++ {"os-image", 0x40000, 0x180000},
> > ++ {"file-system", 0x1c0000, 0xd40000},
> > ++ {"default-mac", 0xf00000, 0x00200},
> > ++ {"pin", 0xf00200, 0x00200},
> > ++ {"device-id", 0xf00400, 0x00100},
> > ++ {"product-info", 0xf00500, 0x0fb00},
> > ++ {"soft-version", 0xf10000, 0x01000},
> > ++ {"extra-para", 0xf11000, 0x01000},
> > ++ {"support-list", 0xf12000, 0x0a000},
> > ++ {"profile", 0xf1c000, 0x04000},
> > ++ {"default-config", 0xf20000, 0x10000},
> > ++ {"user-config", 0xf30000, 0x40000},
> > ++ {"qos-db", 0xf70000, 0x40000},
> > ++ {"certificate", 0xfb0000, 0x10000},
> > ++ {"partition-table", 0xfc0000, 0x10000},
> > ++ {"log", 0xfd0000, 0x20000},
> > ++ {"radio", 0xff0000, 0x10000},
> > ++ {NULL, 0, 0}
> > ++ },
> > ++ .first_sysupgrade_partition = "os-image",
> > ++ .last_sysupgrade_partition = "file-system"
> > ++ },
> > ++
> > + /** Firmware layout for the RE450 */
> > + {
> > + .id = "RE450",
> > +@@ -888,7 +924,8 @@ static void build_image(const char *output,
> > + parts[3] = read_file("os-image", kernel_image, false);
> > + parts[4] = read_file("file-system", rootfs_image,
> > add_jffs2_eof);
> > +
> > +- if (strcasecmp(info->id, "ARCHER-C25-V1") == 0) {
> > ++ /* Some devices need the extra-para partition to accept
> > the
> > firmware */
> > ++ if (strcasecmp(info->id, "ARCHER-C25-V1") == 0 ||
> > strcasecmp(info->id, "TLWR1043NV5") == 0) {
> > + const char mdat[11] = {0x00, 0x00, 0x00, 0x02,
> > 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
> > + parts[5] = put_data("extra-para", mdat, 11);
> > + }
> > +--
> > +2.7.4
> > +
> > diff --git a/src/packages/fff/fff-network/ar71xx/network.tl-
> > wr1043n-
> > v5 b/src/packages/fff/fff-network/ar71xx/network.tl-wr1043n-v5
> > new file mode 100644
> > index 0000000..28e08a1
> > --- /dev/null
> > +++ b/src/packages/fff/fff-network/ar71xx/network.tl-wr1043n-v5
> > @@ -0,0 +1,18 @@
> > +PORTORDER="5 4 3 2 1"
> > +
> > +WANDEV=eth0
> > +SWITCHDEV=eth0
> > +CLIENT_PORTS="1 2 0t"
> > +WAN_PORTS="5 0t"
> > +BATMAN_PORTS="3 4 0t"
> > +
> > +. /lib/functions/system.sh
> > +. /lib/functions/uci-defaults.sh
> > +. /lib/ar71xx.sh
> > +
> > +# Load second MAC from Flash because we haven't any Interface with
> > this MAC where we can copy the MAC from
> > +# https://github.com/lede-project/source/pull/613/files#diff-abd6f
> > 42
> > f54204372151e73eac0556db1
> > +
> > +NEWMAC=$(macaddr_add $(mtd_get_mac_binary product-info 8) 1)
> > +ETHMESHMAC=1
> > +ROUTERMAC=eth0
> > --
> > 2.7.4
-------------- nächster Teil --------------
Ein Dateianhang mit Binärdaten wurde abgetrennt...
Dateiname : signature.asc
Dateityp : application/pgp-signature
Dateigröße : 488 bytes
Beschreibung: This is a digitally signed message part
URL : <http://lists.freifunk.net/pipermail/franken-dev-freifunk.net/attachments/20171103/72ccad7d/attachment.sig>
Mehr Informationen über die Mailingliste franken-dev