[PATCH v2 4/4] Add support for TP-Link C25
Adrian Schmutzler
mail at adrianschmutzler.de
Do Jul 27 13:30:35 CEST 2017
Hallo,
Reviewed-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
Beides gilt nur in Kombination mit meinem Patch "[5/5] Archer C25: Disable 5
GHz to provide working firmware", der 5 GHz vollständig deaktiviert.
Ich bin dafür, das Paket C25 (Patches 1-5) jetzt erstmal zu applien, da er
mit 2.4 GHz stabil läuft und somit als Alternative zum 1043 geeignet ist.
Den Support für 5 GHz würde ich vorschlagen nachzureichen und nachzupatchen,
sobald jemand dazu in der Lage ist (vll. gibt’s ja auch noch einen neuen
Treiber).
Wer 5 GHz testen will, bräuchte dann nur den uci set aus dem Patch 5 lokal
wieder zu entfernen, die Treiber stehen ja weiterhin drin.
Zum 5 GHz nochmal zusammenfassend:
- Ich habe alle 2 min. Neustartloop, sobald auch nur ein Interface unter 5
GHz aktiviert ist (egal ob w5ap oder w5mesh)
- Nehme ich nur die Treiber ohne -ct, erscheint bei mir der physische
Adapter für 5 GHz gar nicht
Grüße
Adrian
> -----Original Message-----
> From: franken-dev [mailto:franken-dev-bounces at freifunk.net] On Behalf
> Of Tim Niemeyer
> Sent: Samstag, 8. Juli 2017 13:00
> To: franken-dev at freifunk.net
> Subject: [PATCH v2 4/4] Add support for TP-Link C25
>
> Signed-off-by: Tim Niemeyer <tim at tn-x.org>
> ---
>
> Changes in v2:
> - Added kernel config for LEDs
> - Changed patch format
>
> bsp/ar71xx/.config | 3 +
> bsp/board_ar71xx.bsp | 1 +
> ...ils-tplink-safeloader-support-strings-as-.patch | 162 +++++++
...1xx-add-
> support-for-TP-Link-Archer-C25-v1.patch | 499
> +++++++++++++++++++++
> ...ils-tplink-safeloader-add-TP-Link-Archer-.patch | 112 +++++
> src/packages/fff/fff-network/Makefile | 2 +-
> .../fff/fff-network/ar71xx/network.archer-c25-v1 | 8 +
> 7 files changed, 786 insertions(+), 1 deletion(-) create mode 100644
> build_patches/openwrt/0005-firmware-utils-tplink-safeloader-support-
> string
> s-as-.patch
> create mode 100644
> build_patches/openwrt/0006-ar71xx-add-support-for-TP-Link-Archer-C25-
> v1.pa
> tch
> create mode 100644
> build_patches/openwrt/0007-firmware-utils-tplink-safeloader-add-TP-Link-
> Ar
> cher-.patch
> create mode 100644
> src/packages/fff/fff-network/ar71xx/network.archer-c25-v1
>
> diff --git a/bsp/ar71xx/.config b/bsp/ar71xx/.config index
43d063c..b407f7d
> 100644
> --- a/bsp/ar71xx/.config
> +++ b/bsp/ar71xx/.config
> @@ -6,6 +6,8 @@ CONFIG_TARGET_ar71xx_generic=y
> CONFIG_TARGET_MULTI_PROFILE=y
> CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_gl-ar150=y
> CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_gl-ar150=""
> +CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_archer-c25-v1=y
> +CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_archer-c25-
> v1="-kmo
> +d-
> ath10k kmod-ath10k-ct -ath10k-firmware-qca9887 ath10k-firmware-qca9887-
> ct"
> CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_archer-c7-v2=y
>
> CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_archer-c7-
> v2="-kmod-at
> h10k kmod-ath10k-ct -ath10k-firmware-qca988x ath10k-firmware-qca988x-
> ct"
> CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_cpe210-220=y
> @@ -83,6 +85,7 @@ CONFIG_CLEAN_IPKG=y
> # CONFIG_KERNEL_DEBUG_INFO is not set
> # CONFIG_KERNEL_DEBUG_KERNEL is not set #
> CONFIG_PACKAGE_ALFRED_VIS is not set
> +CONFIG_PACKAGE_ath10k-firmware-qca9887-ct=m
> CONFIG_PACKAGE_ath10k-firmware-qca988x-ct=m
> CONFIG_PACKAGE_kmod-ath10k-ct=m
> CONFIG_PACKAGE_kmod-hwmon-core=m
> diff --git a/bsp/board_ar71xx.bsp b/bsp/board_ar71xx.bsp index
> 6c541cc..1137b0d 100644
> --- a/bsp/board_ar71xx.bsp
> +++ b/bsp/board_ar71xx.bsp
> @@ -31,4 +31,5 @@
> images=("lede-ar71xx-generic-cpe210-220-squashfs-sysupgrade.bin"
> "lede-ar71xx-generic-tl-wdr4300-v1-squashfs-sysupgrade.bin"
> "lede-ar71xx-generic-tl-wdr4310-v1-squashfs-sysupgrade.bin"
> "lede-ar71xx-generic-archer-c7-v2-squashfs-sysupgrade.bin"
> + "lede-ar71xx-generic-archer-c25-v1-squashfs-sysupgrade.bin"
> )
> diff --git
> a/build_patches/openwrt/0005-firmware-utils-tplink-safeloader-support-stri
> ngs-as-.patch
> b/build_patches/openwrt/0005-firmware-utils-tplink-safeloader-support-stri
> ngs-as-.patch
> new file mode 100644
> index 0000000..289322e
> --- /dev/null
> +++
> b/build_patches/openwrt/0005-firmware-utils-tplink-safeloader-support-stri
> ngs-as-.patch
> @@ -0,0 +1,162 @@
> +From e9ef329106fbf7e71718e73aee8b48315dd22a18 Mon Sep 17 00:00:00
> 2001
> +From: Jan Niehusmann <jan at gondor.com>
> +Date: Fri, 19 May 2017 09:42:24 +0200
> +Subject: [PATCH 5/7] firmware-utils: tplink-safeloader: support strings
> as
> + soft_version
> +
> +Some TP-Link routers (C25, C59, C60) contain a version string instead
> +of a binary structure in the soft_version partition.
> +
> +Flashing LEDE from the original firmware's GUI, this version string
> +taken from the soft_ver partition of the firmware image is written to
> +the router's config partition.
> +
> +When using tftp recovery to go back to the original Archer C25
> +firmware, a version check compares that version to the version of the
> +firmware to be flashed.
> +
> +Without proper contents in the config partition, reverting to the
> +original firmware fails.
> +
> +Therefore, write the string "soft_ver:1.0.0\n" to that soft_ver
> +partition.
> +
> +Signed-off-by: Jan Niehusmann <jan at gondor.com> [Rebased on v17.01.2]
> +Signed-off-by: Tim Niemeyer <tim at tnx-x.org>
> +---
> + tools/firmware-utils/src/tplink-safeloader.c | 34
> +++++++++++++++++++++++++++-
> + 1 file changed, 33 insertions(+), 1 deletion(-)
> +
> +diff --git a/tools/firmware-utils/src/tplink-safeloader.c
> b/tools/firmware-utils/src/tplink-safeloader.c
> +index 4e3d205..688cdac 100644
> +--- a/tools/firmware-utils/src/tplink-safeloader.c
> ++++ b/tools/firmware-utils/src/tplink-safeloader.c
> +@@ -75,6 +75,7 @@ struct device_info {
> + const char *vendor;
> + const char *support_list;
> + char support_trail;
> ++ const char *soft_ver;
> + const struct flash_partition_entry partitions[MAX_PARTITIONS+1];
> + const char *first_sysupgrade_partition;
> + const char *last_sysupgrade_partition; @@ -130,6 +131,7 @@ static
> +struct device_info boards[] = {
> + "CPE220(TP-LINK|US|N300-2):1.1\r\n"
> + "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
> + .support_trail = '\xff',
> ++ .soft_ver = NULL,
> +
> + .partitions = {
> + {"fs-uboot", 0x00000, 0x20000},
> +@@ -167,6 +169,7 @@ static struct device_info boards[] = {
> + "CPE520(TP-LINK|US|N300-5):1.1\r\n"
> + "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
> + .support_trail = '\xff',
> ++ .soft_ver = NULL,
> +
> + .partitions = {
> + {"fs-uboot", 0x00000, 0x20000},
> +@@ -198,6 +201,7 @@ static struct device_info boards[] = {
> + "WBS210(TP-LINK|US|N300-2):1.20\r\n"
> + "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
> + .support_trail = '\xff',
> ++ .soft_ver = NULL,
> +
> + .partitions = {
> + {"fs-uboot", 0x00000, 0x20000},
> +@@ -229,6 +233,7 @@ static struct device_info boards[] = {
> + "WBS510(TP-LINK|US|N300-5):1.20\r\n"
> + "WBS510(TP-LINK|EU|N300-5):1.20\r\n",
> + .support_trail = '\xff',
> ++ .soft_ver = NULL,
> +
> + .partitions = {
> + {"fs-uboot", 0x00000, 0x20000},
> +@@ -259,6 +264,7 @@ static struct device_info boards[] = {
> + "SupportList:\r\n"
> + "{product_name:Archer
> C2600,product_ver:1.0.0,special_id:00000000}\r\n",
> + .support_trail = '\x00',
> ++ .soft_ver = NULL,
> +
> + .partitions = {
> + {"SBL1", 0x00000, 0x20000},
> +@@ -303,6 +309,7 @@ static struct device_info boards[] = {
> + "product_ver:2.0.0,"
> + "special_id:00000000}\r\n",
> + .support_trail = '\x00',
> ++ .soft_ver = NULL,
> +
> + .partitions = {
> + {"fs-uboot", 0x00000, 0x40000},
> +@@ -337,6 +344,7 @@ static struct device_info boards[] = {
> + "product_ver:1.0.0,"
> + "special_id:00000000}\n",
> + .support_trail = '\x00',
> ++ .soft_ver = NULL,
> +
> + .partitions = {
> + {"fs-uboot", 0x00000, 0x40000},
> +@@ -369,6 +377,7 @@ static struct device_info boards[] = {
> + "SupportList:\r\n"
> + "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
> + .support_trail = '\xff',
> ++ .soft_ver = NULL,
> +
> + .partitions = {
> + {"fs-uboot", 0x00000, 0x20000},
> +@@ -398,6 +407,7 @@ static struct device_info boards[] = {
> + "SupportList:\n"
> +
> "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
> + .support_trail = '\x00',
> ++ .soft_ver = NULL,
> +
> + /**
> + We use a bigger os-image partition than the stock
> images (and thus
> +@@ -441,6 +451,7 @@ static struct device_info boards[] = {
> +
> "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
> +
> "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
> + .support_trail = '\x00',
> ++ .soft_ver = NULL,
> +
> + /**
> + The flash partition table for RE450; @@ -569,6 +580,23 @@
> static
> +struct image_partition_entry
> make_soft_version(uint32_t rev) {
> + return entry;
> + }
> +
> ++static struct image_partition_entry
> ++make_soft_version_from_string(const
> char *soft_ver) {
> ++ /** String length _including_ the terminating zero byte */
> ++ uint32_t ver_len = strlen(soft_ver) + 1;
> ++ /** Partition contains 64 bit header, the version string, and one
> additional null byte */
> ++ size_t partition_len = 2*sizeof(uint32_t) + ver_len + 1;
> ++ struct image_partition_entry entry =
> alloc_image_partition("soft-version", partition_len);
> ++
> ++ uint32_t *len = (uint32_t *)entry.data;
> ++ len[0] = htonl(ver_len);
> ++ len[1] = 0;
> ++ memcpy(&len[2], soft_ver, ver_len);
> ++
> ++ entry.data[partition_len - 1] = 0;
> ++
> ++ return entry;
> ++}
> ++
> + /** Generates the support-list partition */ static struct
> + image_partition_entry make_support_list(const struct
> device_info *info) {
> + size_t len = strlen(info->support_list); @@ -799,7 +827,11 @@ static
> +void build_image(const char *output,
> + struct image_partition_entry parts[6] = {};
> +
> + parts[0] = make_partition_table(info->partitions);
> +- parts[1] = make_soft_version(rev);
> ++ if (info->soft_ver)
> ++ parts[1] = make_soft_version_from_string(info->soft_ver);
> ++ else
> ++ parts[1] = make_soft_version(rev);
> ++
> + parts[2] = make_support_list(info);
> + parts[3] = read_file("os-image", kernel_image, false);
> + parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof);
> +--
> +2.1.4
> +
> diff --git
> a/build_patches/openwrt/0006-ar71xx-add-support-for-TP-Link-Archer-C25-
> v1.
> patch
> b/build_patches/openwrt/0006-ar71xx-add-support-for-TP-Link-Archer-C25-
> v1.
> patch
> new file mode 100644
> index 0000000..aa0f9ce
> --- /dev/null
> +++
> b/build_patches/openwrt/0006-ar71xx-add-support-for-TP-Link-Archer-C25-
> v1.
> patch
> @@ -0,0 +1,499 @@
> +From a5290bd7279f0aa4a7129ce103fec154239ddd86 Mon Sep 17 00:00:00
> 2001
> +From: Ludwig Thomeczek <ledesrc at wxorx.net>
> +Date: Sat, 22 Apr 2017 18:21:47 +0200
> +Subject: [PATCH 6/7] ar71xx: add support for TP-Link Archer C25 v1
> +
> +The TP-Link Archer C25 is a low-cost dual-band router.
> +
> +Specification:
> +
> +- CPU: Atheros QCA9561 775 MHz
> +- RAM: 64 MB
> +- Flash: 8 MB
> +- Wifi: 3x3 2.4 GHz (integrated), 1x1 5 GHz QCA9887
> +- NET: 5x 10/100 Mbps Ethernet
> +
> +Some LEDs are controlled by an additional 74HC595 chip.
> +
> +Signed-off-by: Ludwig Thomeczek <ledesrc at wxorx.net> [minor code style
> +fixes, boards alphabetical order fixes, reworked commit message]
> +Signed-off-by: Piotr Dymacz <pepe2k at gmail.com> [Rebased on v17.01.2]
> +Signed-off-by: Tim Niemeyer <tim at tnx-x.org>
> +---
> + target/linux/ar71xx/base-files/etc/board.d/01_leds | 9 +
> + .../linux/ar71xx/base-files/etc/board.d/02_network | 1 +
> + target/linux/ar71xx/base-files/etc/diag.sh | 1 +
> + .../etc/hotplug.d/firmware/11-ath10k-caldata | 1 +
> + target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
> + .../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
> + target/linux/ar71xx/config-4.4 | 3 +
> + .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 +
> + target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
> + .../files/arch/mips/ath79/mach-archer-c25-v1.c | 227
> +++++++++++++++++++++
> + .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
> + target/linux/ar71xx/image/tp-link.mk | 24 +++
> + target/linux/ar71xx/mikrotik/config-default | 1 +
> + target/linux/ar71xx/nand/config-default | 1 +
> + 14 files changed, 285 insertions(+)
> + create mode 100644
> target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
> +
> +diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> +index 0279dfc..3aa2bfb 100755
> +--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> ++++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> +@@ -49,6 +49,15 @@ antrouter-r1)
> + ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
> + ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0"
> + ;;
> ++archer-c25-v1)
> ++ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
> ++ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g"
> "phy1tpt"
> ++ ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g"
> "phy0tpt"
> ++ ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0"
> "0x10"
> ++ ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0"
> "0x08"
> ++ ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0"
> "0x04"
> ++ ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0"
> "0x02"
> ++ ;;
> + arduino-yun)
> + ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
> + ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
> +diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network
> b/target/linux/ar71xx/base-files/etc/board.d/02_network
> +index c8c7827..4404e80 100755
> +--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
> ++++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
> +@@ -122,6 +122,7 @@ ar71xx_setup_interfaces()
> + a60|\
> + alfa-ap96|\
> + alfa-nx|\
> ++ archer-c25-v1|\
> + dr344|\
> + gl-ar150|\
> + gl-ar300m|\
> +diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
> b/target/linux/ar71xx/base-files/etc/diag.sh
> +index 7b8aac8..cf6278c 100644
> +--- a/target/linux/ar71xx/base-files/etc/diag.sh
> ++++ b/target/linux/ar71xx/base-files/etc/diag.sh
> +@@ -47,6 +47,7 @@ get_status_led() {
> + ap135-020)
> + status_led="ap135:green:status"
> + ;;
> ++ archer-c25-v1|\
> + mr12|\
> + mr16|\
> + nbg6616|\
> +diff --git
> a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> +index b3e23c9..68f90de 100644
> +---
> a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> ++++
> b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> +@@ -92,6 +92,7 @@ case "$FIRMWARE" in
> + ath10kcal_extract "art" 20480 2116
> + ath10kcal_patch_mac $(macaddr_add $(cat
> /sys/class/net/eth0/address) -2)
> + ;;
> ++ archer-c25-v1|\
> + tl-wdr6500-v2)
> + ath10kcal_extract "art" 20480 2116
> + ath10kcal_patch_mac $(macaddr_add $(cat
> /sys/class/net/eth1/address) -2)
> +diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +index b035535..0d01c5e 100755
> +--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> ++++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +@@ -457,6 +457,9 @@ ar71xx_board_detect() {
> + *AP90Q)
> + name="ap90q"
> + ;;
> ++ *"Archer C25 v1")
> ++ name="archer-c25-v1"
> ++ ;;
> + *"Archer C5")
> + name="archer-c5"
> + ;;
> +diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +index 580e09a..e2aaceb 100755
> +--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> ++++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +@@ -205,6 +205,7 @@ platform_check_image() {
> + airrouter|\
> + ap132|\
> + ap90q|\
> ++ archer-c25-v1|\
> + bullet-m|\
> + c-55|\
> + carambola2|\
> +diff --git a/target/linux/ar71xx/config-4.4
> b/target/linux/ar71xx/config-4.4
> +index ff6bb13..79308e8 100644
> +--- a/target/linux/ar71xx/config-4.4
> ++++ b/target/linux/ar71xx/config-4.4
> +@@ -50,6 +50,7 @@ CONFIG_ATH79_MACH_AP152=y #
> CONFIG_ATH79_MACH_AP81
> +is not set CONFIG_ATH79_MACH_AP90Q=y
> CONFIG_ATH79_MACH_AP96=y
> ++CONFIG_ATH79_MACH_ARCHER_C25_V1=y
> + CONFIG_ATH79_MACH_ARCHER_C7=y
> + CONFIG_ATH79_MACH_ARDUINO_YUN=y
> + CONFIG_ATH79_MACH_AW_NR580=y
> +@@ -269,6 +270,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y
> +CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GPIOLIB=y
> +CONFIG_GPIOLIB_IRQCHIP=y
> ++CONFIG_GPIO_74X164=y
> + CONFIG_GPIO_DEVRES=y
> + # CONFIG_GPIO_LATCH is not set
> + CONFIG_GPIO_NXP_74HC153=y
> +@@ -335,6 +337,7 @@ CONFIG_LEDS_NU801=y CONFIG_LIBFDT=y
> +CONFIG_MARVELL_PHY=y CONFIG_MDIO_BITBANG=y
> ++CONFIG_SPI_GPIO=y
> + CONFIG_MDIO_BOARDINFO=y
> + CONFIG_MDIO_GPIO=y
> + CONFIG_MICREL_PHY=y
> +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> +index 76ba6fa..d49659c 100644
> +--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> ++++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> +@@ -1224,6 +1224,17 @@ config ATH79_MACH_BSB
> + select ATH79_DEV_USB
> + select ATH79_DEV_WMAC
> +
> ++config ATH79_MACH_ARCHER_C25_V1
> ++ bool "TP-LINK Archer C25 v1 support"
> ++ select SOC_QCA956X
> ++ select ATH79_DEV_AP9X_PCI if PCI
> ++ select ATH79_DEV_ETH
> ++ select ATH79_DEV_GPIO_BUTTONS
> ++ select ATH79_DEV_LEDS_GPIO
> ++ select ATH79_DEV_M25P80
> ++ select ATH79_DEV_WMAC
> ++
> ++
> + config ATH79_MACH_ARCHER_C7
> + bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
> + select SOC_QCA955X
> +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> +index c91d03f..fc28716 100644
> +--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> ++++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> +@@ -55,6 +55,7 @@ obj-$(CONFIG_ATH79_MACH_AP147)
> +=
> mach-ap147.o
> + obj-$(CONFIG_ATH79_MACH_AP152) += mach-
> ap152.o
> + obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-
> ap90q.o
> + obj-$(CONFIG_ATH79_MACH_AP96) += mach-
> ap96.o
> ++obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) +=
> mach-archer-c25-v1.o
> + obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
> + obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-
> arduino-yun.o
> + obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
> +diff --git
> a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
> b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
> +new file mode 100644
> +index 0000000..a0f001c
> +--- /dev/null
> ++++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
> +@@ -0,0 +1,227 @@
> ++/*
> ++ * TP-Link Archer C25 v1 board support
> ++ *
> ++ * Copyright (C) 2017 Ludwig Thomeczek <ledesrc at wxorx.net>
> ++ * based on mach-archer-c60/C59-v1.c
> ++ * Copyright (C) 2016 Henryk Heisig <hyniu at o2.pl>
> ++ *
> ++ * This program is free software; you can redistribute it and/or
> ++modify
> it
> ++ * under the terms of the GNU General Public License version 2 as
> published
> ++ * by the Free Software Foundation.
> ++ */
> ++#include <linux/platform_device.h>
> ++#include <linux/ath9k_platform.h>
> ++#include <linux/ar8216_platform.h>
> ++#include <asm/mach-ath79/ar71xx_regs.h> #include <linux/gpio.h>
> ++
> ++#include "common.h"
> ++#include "dev-m25p80.h"
> ++#include "machtypes.h"
> ++#include "pci.h"
> ++#include "dev-ap9x-pci.h"
> ++#include "dev-eth.h"
> ++#include "dev-gpio-buttons.h"
> ++#include "dev-leds-gpio.h"
> ++#include "dev-spi.h"
> ++#include "dev-usb.h"
> ++#include "dev-wmac.h"
> ++#include <linux/spi/spi_gpio.h>
> ++#include <linux/spi/74x164.h>
> ++
> ++#define ARCHER_C25_GPIO_SHIFT_OE 21 /* OE, Output Enable */
> ++#define ARCHER_C25_GPIO_SHIFT_SER 14 /* DS, Data Serial Input */
> ++#define ARCHER_C25_GPIO_SHIFT_SRCLK 15 /* SHCP, Shift Reg Clock
> Input
> */
> ++#define ARCHER_C25_GPIO_SHIFT_SRCLR 19 /* MR, Master Reset */
> ++#define ARCHER_C25_GPIO_SHIFT_RCLK 16 /* STCP, Storage Reg Clock
> Input */
> ++
> ++#define ARCHER_C25_74HC_GPIO_BASE
> QCA956X_GPIO_COUNT
> ++#define ARCHER_C25_74HC_GPIO_LED_WAN_AMBER 27
> ++#define ARCHER_C25_74HC_GPIO_LED_WAN_GREEN 28
> ++#define ARCHER_C25_74HC_GPIO_LED_WLAN2 29
> ++#define ARCHER_C25_74HC_GPIO_LED_WLAN5 30
> ++#define ARCHER_C25_74HC_GPIO_LED_LAN1 23
> ++#define ARCHER_C25_74HC_GPIO_LED_LAN2 24
> ++#define ARCHER_C25_74HC_GPIO_LED_LAN3 25
> ++#define ARCHER_C25_74HC_GPIO_LED_LAN4 26
> ++
> ++#define ARCHER_C25_V1_SSR_BIT_0 0
> ++#define ARCHER_C25_V1_SSR_BIT_1 1
> ++#define ARCHER_C25_V1_SSR_BIT_2 2
> ++#define ARCHER_C25_V1_SSR_BIT_3 3
> ++#define ARCHER_C25_V1_SSR_BIT_4 4
> ++#define ARCHER_C25_V1_SSR_BIT_5 5
> ++#define ARCHER_C25_V1_SSR_BIT_6 6
> ++#define ARCHER_C25_V1_SSR_BIT_7 7
> ++
> ++
> ++#define ARCHER_C25_V1_KEYS_POLL_INTERVAL 20
> ++#define ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL \
> ++ (3 *
> ARCHER_C25_V1_KEYS_POLL_INTERVAL)
> ++
> ++#define ARCHER_C25_V1_GPIO_BTN_RESET 1
> ++#define ARCHER_C25_V1_GPIO_BTN_RFKILL 22
> ++
> ++#define ARCHER_C25_V1_GPIO_LED_POWER 17
> ++#define ARCHER_C25_V1_GPIO_LED_WPS 2
> ++
> ++#define ARCHER_C25_V1_WMAC_CALDATA_OFFSET 0x1000
> ++
> ++static struct spi_gpio_platform_data archer_c25_v1_spi_data = {
> ++ .sck = ARCHER_C25_GPIO_SHIFT_SRCLK,
> ++ .miso = SPI_GPIO_NO_MISO,
> ++ .mosi = ARCHER_C25_GPIO_SHIFT_SER,
> ++ .num_chipselect = 1,
> ++};
> ++
> ++static u8 archer_c25_v1_ssr_initdata[] __initdata = {
> ++ BIT(ARCHER_C25_V1_SSR_BIT_7) |
> ++ BIT(ARCHER_C25_V1_SSR_BIT_6) |
> ++ BIT(ARCHER_C25_V1_SSR_BIT_5) |
> ++ BIT(ARCHER_C25_V1_SSR_BIT_4) |
> ++ BIT(ARCHER_C25_V1_SSR_BIT_3) |
> ++ BIT(ARCHER_C25_V1_SSR_BIT_2) |
> ++ BIT(ARCHER_C25_V1_SSR_BIT_1)
> ++};
> ++
> ++static struct gen_74x164_chip_platform_data archer_c25_v1_ssr_data = {
> ++ .base = ARCHER_C25_74HC_GPIO_BASE,
> ++ .num_registers = ARRAY_SIZE(archer_c25_v1_ssr_initdata),
> ++ .init_data = archer_c25_v1_ssr_initdata, };
> ++
> ++static struct platform_device archer_c25_v1_spi_device = {
> ++ .name = "spi_gpio",
> ++ .id = 1,
> ++ .dev = {
> ++ .platform_data = &archer_c25_v1_spi_data,
> ++ },
> ++};
> ++
> ++static struct spi_board_info archer_c25_v1_spi_info[] = {
> ++ {
> ++ .bus_num = 1,
> ++ .chip_select = 0,
> ++ .max_speed_hz = 10000000,
> ++ .modalias = "74x164",
> ++ .platform_data = &archer_c25_v1_ssr_data,
> ++ .controller_data = (void *)
> ARCHER_C25_GPIO_SHIFT_RCLK,
> ++ },
> ++};
> ++
> ++static struct gpio_led archer_c25_v1_leds_gpio[] __initdata = {
> ++ {
> ++ .name = "archer-c25-v1:green:power",
> ++ .gpio = ARCHER_C25_V1_GPIO_LED_POWER,
> ++ .active_low = 1,
> ++ }, {
> ++ .name = "archer-c25-v1:green:wps",
> ++ .gpio = ARCHER_C25_V1_GPIO_LED_WPS,
> ++ .active_low = 1,
> ++ }, {
> ++ .name = "archer-c25-v1:green:wlan2g",
> ++ .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN2,
> ++ .active_low = 1,
> ++ }, {
> ++ .name = "archer-c25-v1:green:wlan5g",
> ++ .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN5,
> ++ .active_low = 1,
> ++ }, {
> ++ .name = "archer-c25-v1:green:lan1",
> ++ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN1,
> ++ .active_low = 1,
> ++ }, {
> ++ .name = "archer-c25-v1:green:lan2",
> ++ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN2,
> ++ .active_low = 1,
> ++ }, {
> ++ .name = "archer-c25-v1:green:lan3",
> ++ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN3,
> ++ .active_low = 1,
> ++ }, {
> ++ .name = "archer-c25-v1:green:lan4",
> ++ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN4,
> ++ .active_low = 1,
> ++ }, {
> ++ .name = "archer-c25-v1:green:wan",
> ++ .gpio =
> ARCHER_C25_74HC_GPIO_LED_WAN_GREEN,
> ++ .active_low = 1,
> ++ }, {
> ++ .name = "archer-c25-v1:amber:wan",
> ++ .gpio =
> ARCHER_C25_74HC_GPIO_LED_WAN_AMBER,
> ++ .active_low = 1,
> ++ },
> ++};
> ++
> ++static struct gpio_keys_button archer_c25_v1_gpio_keys[] __initdata = {
> ++ {
> ++ .desc = "Reset button",
> ++ .type = EV_KEY,
> ++ .code = KEY_RESTART,
> ++ .debounce_interval =
> ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
> ++ .gpio = ARCHER_C25_V1_GPIO_BTN_RESET,
> ++ .active_low = 1,
> ++ }, {
> ++ .desc = "RFKILL button",
> ++ .type = EV_KEY,
> ++ .code = KEY_RFKILL,
> ++ .debounce_interval =
> ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
> ++ .gpio =
> ARCHER_C25_V1_GPIO_BTN_RFKILL,
> ++ .active_low = 1,
> ++ },
> ++};
> ++
> ++static void __init archer_c25_v1_setup(void) {
> ++ u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0008);
> ++ u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
> ++
> ++ ath79_register_m25p80(NULL);
> ++
> ++ spi_register_board_info(archer_c25_v1_spi_info,
> ++ ARRAY_SIZE(archer_c25_v1_spi_info));
> ++
> ++ platform_device_register(&archer_c25_v1_spi_device);
> ++
> ++ gpio_request_one(ARCHER_C25_GPIO_SHIFT_OE,
> ++ GPIOF_OUT_INIT_LOW |
> GPIOF_EXPORT_DIR_FIXED,
> ++ "LED control");
> ++
> ++ gpio_request_one(ARCHER_C25_GPIO_SHIFT_SRCLR,
> ++ GPIOF_OUT_INIT_HIGH |
> GPIOF_EXPORT_DIR_FIXED,
> ++ "LED reset");
> ++
> ++ ath79_register_leds_gpio(-1,
> ARRAY_SIZE(archer_c25_v1_leds_gpio),
> ++ archer_c25_v1_leds_gpio);
> ++
> ++ ath79_register_gpio_keys_polled(-1,
> ARCHER_C25_V1_KEYS_POLL_INTERVAL,
> ++
> ARRAY_SIZE(archer_c25_v1_gpio_keys),
> ++ archer_c25_v1_gpio_keys);
> ++
> ++ ath79_register_mdio(0, 0x0);
> ++ ath79_register_mdio(1, 0x0);
> ++
> ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
> ++ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
> ++
> ++ /* WAN port */
> ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
> ++ ath79_eth0_data.speed = SPEED_100;
> ++ ath79_eth0_data.duplex = DUPLEX_FULL;
> ++ ath79_eth0_data.phy_mask = BIT(4);
> ++ ath79_register_eth(0);
> ++
> ++ /* LAN ports */
> ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
> ++ ath79_eth1_data.speed = SPEED_1000;
> ++ ath79_eth1_data.duplex = DUPLEX_FULL;
> ++ ath79_switch_data.phy_poll_mask |= BIT(4);
> ++ ath79_switch_data.phy4_mii_en = 1;
> ++ ath79_register_eth(1);
> ++
> ++ ath79_register_wmac(art +
> ARCHER_C25_V1_WMAC_CALDATA_OFFSET, mac);
> ++ ap91_pci_init(NULL, NULL);
> ++}
> ++
> ++MIPS_MACHINE(ATH79_MACH_ARCHER_C25_V1, "ARCHER-C25-V1", "TP-
> LINK
> ++Archer
> C25 v1",
> ++ archer_c25_v1_setup);
> +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> +index b9a8e3e..53f0d1c 100644
> +--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> ++++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> +@@ -39,6 +39,7 @@ enum ath79_mach_type {
> + ATH79_MACH_AP152, /* Atheros AP152 reference
> board */
> + ATH79_MACH_AP90Q, /* YunCore AP90Q */
> + ATH79_MACH_AP96, /* Atheros AP96 */
> ++ ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25
> V1
> board */
> + ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5
> board
> */
> + ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7
> board
> */
> + ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7
> V2
> board */
> +diff --git a/target/linux/ar71xx/image/tp-link.mk
> b/target/linux/ar71xx/image/tp-link.mk
> +index 1c88f43..f70c12c 100644
> +--- a/target/linux/ar71xx/image/tp-link.mk
> ++++ b/target/linux/ar71xx/image/tp-link.mk
> +@@ -45,6 +45,14 @@ define Build/mktplinkfw-kernel
> + @mv $@.new $@
> + endef
> +
> ++define Build/uImageArcher
> ++ mkimage -A $(LINUX_KARCH) \
> ++ -O linux -T kernel \
> ++ -C $(1) -a $(KERNEL_LOADADDR) -e $(if
> $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
> ++ -n '$(call toupper,$(LINUX_KARCH)) LEDE
> Linux-$(LINUX_VERSION)' -d $@ $@.new
> ++ @mv $@.new $@
> ++endef
> ++
> + define Device/tplink
> + TPLINK_HWREV := 0x1
> + TPLINK_HEADER_VERSION := 1
> +@@ -95,6 +103,22 @@ $(Device/tplink)
> + IMAGE_SIZE := 15872k
> + endef
> +
> ++define Device/archer-c25-v1
> ++ DEVICE_TITLE := TP-LINK Archer C25 v1
> ++ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887
> ++ BOARDNAME := ARCHER-C25-V1
> ++ TPLINK_BOARD_NAME := ARCHER-C25-V1
> ++ DEVICE_PROFILE := ARCHERC25V1
> ++ IMAGE_SIZE := 7808k
> ++ LOADER_TYPE := elf
> ++ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
> ++ IMAGES := sysupgrade.bin factory.bin
> ++ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
> ++ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
> ++ MTDPARTS :=
> spi0.0:128k(factory-uboot)ro,64k(u-boot)ro,1536k(kernel),6272k(rootfs),128
> k(config)ro,64k(art)ro,7808k at 0x30000(firmware)
> ++endef
> ++TARGET_DEVICES += archer-c25-v1
> ++
> + define Device/cpe510-520
> + DEVICE_TITLE := TP-LINK CPE510/520
> + DEVICE_PACKAGES := rssileds
> +diff --git a/target/linux/ar71xx/mikrotik/config-default
> b/target/linux/ar71xx/mikrotik/config-default
> +index 44ea327..3f11c23 100644
> +--- a/target/linux/ar71xx/mikrotik/config-default
> ++++ b/target/linux/ar71xx/mikrotik/config-default
> +@@ -15,6 +15,7 @@
> + # CONFIG_ATH79_MACH_AP152 is not set
> + # CONFIG_ATH79_MACH_AP90Q is not set
> + # CONFIG_ATH79_MACH_AP96 is not set
> ++# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
> + # CONFIG_ATH79_MACH_ARCHER_C7 is not set #
> +CONFIG_ATH79_MACH_ARDUINO_YUN is not set #
> CONFIG_ATH79_MACH_AW_NR580
> +is not set diff --git a/target/linux/ar71xx/nand/config-default
> b/target/linux/ar71xx/nand/config-default
> +index 515266b..6357531 100644
> +--- a/target/linux/ar71xx/nand/config-default
> ++++ b/target/linux/ar71xx/nand/config-default
> +@@ -8,6 +8,7 @@
> + # CONFIG_ATH79_MACH_AP136 is not set
> + # CONFIG_ATH79_MACH_AP147 is not set
> + # CONFIG_ATH79_MACH_AP96 is not set
> ++# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
> + # CONFIG_ATH79_MACH_ARCHER_C7 is not set #
> CONFIG_ATH79_MACH_AW_NR580
> +is not set # CONFIG_ATH79_MACH_CAP324 is not set
> +--
> +2.1.4
> +
> diff --git
> a/build_patches/openwrt/0007-firmware-utils-tplink-safeloader-add-TP-
> Link-
> Archer-.patch
> b/build_patches/openwrt/0007-firmware-utils-tplink-safeloader-add-TP-
> Link-
> Archer-.patch
> new file mode 100644
> index 0000000..861ccfd
> --- /dev/null
> +++
> b/build_patches/openwrt/0007-firmware-utils-tplink-safeloader-add-TP-
> Link-
> Archer-.patch
> @@ -0,0 +1,112 @@
> +From ae91fb7f8cef0fbd9b0ee707ce577ac9c5cdf2f2 Mon Sep 17 00:00:00
> 2001
> +From: Ludwig Thomeczek <ledesrc at wxorx.net>
> +Date: Sat, 13 May 2017 11:40:48 +0200
> +Subject: [PATCH 7/7] firmware-utils: tplink-safeloader: add TP-Link
> Archer C25
> + v1
> +
> +This adds the necessary firmware layout definitions for the Archer C25.
> +It has an addtional partition containing some static data
> +("extra-para") without which no factory flash is possible, therefore
> +put_data() has been added.
> +
> +Signed-off-by: Ludwig Thomeczek <ledesrc at wxorx.net> [Rebased on
> +v17.01.2]
> +Signed-off-by: Tim Niemeyer <tim at tnx-x.org>
> +---
> + tools/firmware-utils/src/tplink-safeloader.c | 59
> +++++++++++++++++++++++++++-
> + 1 file changed, 58 insertions(+), 1 deletion(-)
> +
> +diff --git a/tools/firmware-utils/src/tplink-safeloader.c
> b/tools/firmware-utils/src/tplink-safeloader.c
> +index 688cdac..2468426 100644
> +--- a/tools/firmware-utils/src/tplink-safeloader.c
> ++++ b/tools/firmware-utils/src/tplink-safeloader.c
> +@@ -299,6 +299,48 @@ static struct device_info boards[] = {
> + .last_sysupgrade_partition = "file-system"
> + },
> +
> ++ /** Firmware layout for the C25v1 */
> ++ {
> ++ .id = "ARCHER-C25-V1",
> ++ .support_list =
> ++ "SupportList:\n"
> ++
> "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
> ++
> "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
> ++
> "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
> ++ .support_trail = '\x00',
> ++ .soft_ver = "soft_ver:1.0.0\n",
> ++
> ++ /**
> ++ We use a bigger os-image partition than the stock
> images (and thus
> ++ smaller file-system), as our kernel doesn't fit in the
> stock firmware's
> ++ 1MB os-image.
> ++ */
> ++ .partitions = {
> ++ {"factory-boot", 0x00000, 0x20000},
> ++ {"fs-uboot", 0x20000, 0x10000},
> ++ {"os-image", 0x30000, 0x180000}, /* Stock:
> base 0x30000 size 0x100000 */
> ++ {"file-system", 0x1b0000, 0x620000}, /* Stock:
> base 0x130000 size 0x6a0000 */
> ++ {"user-config", 0x7d0000, 0x04000},
> ++ {"default-mac", 0x7e0000, 0x00100},
> ++ {"device-id", 0x7e0100, 0x00100},
> ++ {"extra-para", 0x7e0200, 0x00100},
> ++ {"pin", 0x7e0300, 0x00100},
> ++ {"support-list", 0x7e0400, 0x00400},
> ++ {"soft-version", 0x7e0800, 0x00400},
> ++ {"product-info", 0x7e0c00, 0x01400},
> ++ {"partition-table", 0x7e2000, 0x01000},
> ++ {"profile", 0x7e3000, 0x01000},
> ++ {"default-config", 0x7e4000, 0x04000},
> ++ {"merge-config", 0x7ec000, 0x02000},
> ++ {"qos-db", 0x7ee000, 0x02000},
> ++ {"radio", 0x7f0000, 0x10000},
> ++ {NULL, 0, 0}
> ++ },
> ++
> ++ .first_sysupgrade_partition = "os-image",
> ++ .last_sysupgrade_partition = "file-system",
> ++ },
> ++
> + /** Firmware layout for the C5 */
> + {
> + .id = "ARCHER-C5-V2",
> +@@ -643,6 +685,15 @@ static struct image_partition_entry
> +read_file(const
> char *part_name, const char
> + return entry;
> + }
> +
> ++/** Creates a new image partition from arbitrary data */ static struct
> ++image_partition_entry put_data(const char *part_name,
> const char *datain, size_t len) {
> ++
> ++ struct image_partition_entry entry =
> alloc_image_partition(part_name, len);
> ++
> ++ memcpy(entry.data, datain, len);
> ++
> ++ return entry;
> ++}
> +
> + /**
> + Copies a list of image partitions into an image buffer and
> + generates
> the image partition table while doing so
> +@@ -824,7 +875,8 @@ static void build_image(const char *output,
> + bool add_jffs2_eof,
> + bool sysupgrade,
> + const struct device_info *info) {
> +- struct image_partition_entry parts[6] = {};
> ++
> ++ struct image_partition_entry parts[7] = {};
> +
> + parts[0] = make_partition_table(info->partitions);
> + if (info->soft_ver)
> +@@ -836,6 +888,11 @@ static void build_image(const char *output,
> + parts[3] = read_file("os-image", kernel_image, false);
> + parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof);
> +
> ++ if (strcasecmp(info->id, "ARCHER-C25-V1") == 0) {
> ++ const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00,
> 0x00, 0x00, 0x01, 0x00, 0x00};
> ++ parts[5] = put_data("extra-para", mdat, 11);
> ++ }
> ++
> + size_t len;
> + void *image;
> + if (sysupgrade)
> +--
> +2.1.4
> +
> diff --git a/src/packages/fff/fff-network/Makefile
> b/src/packages/fff/fff-network/Makefile
> index fee3f98..d34016c 100644
> --- a/src/packages/fff/fff-network/Makefile
> +++ b/src/packages/fff/fff-network/Makefile
> @@ -1,7 +1,7 @@
> include $(TOPDIR)/rules.mk
>
> PKG_NAME:=fff-network
> -PKG_VERSION:=0.0.6
> +PKG_VERSION:=0.0.7
> PKG_RELEASE:=1
>
> PKG_BUILD_DIR:=$(BUILD_DIR)/fff-network
> diff --git a/src/packages/fff/fff-network/ar71xx/network.archer-c25-v1
> b/src/packages/fff/fff-network/ar71xx/network.archer-c25-v1
> new file mode 100644
> index 0000000..e524545
> --- /dev/null
> +++ b/src/packages/fff/fff-network/ar71xx/network.archer-c25-v1
> @@ -0,0 +1,8 @@
> +WANDEV=eth0
> +SWITCHDEV=eth1
> +CLIENT_PORTS="1 2 0t"
> +WAN_PORTS=""
> +BATMAN_PORTS="3 4 0t"
> +
> +ETHMESHMAC=eth1
> +ROUTERMAC=eth0
> --
> 2.1.4
>
> --
> franken-dev mailing list
> franken-dev at freifunk.net
> http://lists.freifunk.net/mailman/listinfo/franken-dev-freifunk.net
Mehr Informationen über die Mailingliste franken-dev