[PATCH v1 3/3] Add support for TP-Link C25
Christian Dresel
fff at chrisi01.de
Fr Jul 7 12:33:46 CEST 2017
hi
ich habs nuna uch getestet und noch 2 Anmerkungen:
- Die LEDs leuchten alle (bis auf Power) dauerhaft. Nach meinen Infos
sollten sie im LEDE Master aber gehen.
- Batman scheint auf den w5mesh Interface nicht zu gehen. Ich kann zwar
über das AdHoc pingen und sogar per SSH von einen Router auf den anderen
zugreifen (fe80::MAC%w5mesh geht) aber Batman selbst geht nicht (sobald
ich w2mesh ausschalte und das Batmankabel ziehe ist der Router isoliert
man kommt nur noch direkt per AdHoc drauf und ein batctl o sagt dann "no
nodes in Range"). batctl if sagt aber das Batman auf den Interface
liegt. Wieso/weshalb muss man mal gucken.
mfg
Christian
On 02.07.2017 18:20, Christian Dresel wrote:
> Hi
>
> danke für deine Arbeit. Ich hab das ganze mal überflogen, unser internes
> Zeug soweit verstanden und ist ok. Das ganze LEDE C bin ich aber
> wirklich nur ganz grob durchgegangen und testen kann ich es aus Mangel
> an Hardware auch nicht.
>
> Ich setzt dennoch mal ein
>
> Reviewed-by: Christian Dresel <fff at chrisi01.de>
>
> darunter mit den oben genannten Einschränkungen.
>
> mfg
>
> Christian
>
> On 01.07.2017 19:06, Tim Niemeyer wrote:
>> Signed-off-by: Tim Niemeyer <tim at tn-x.org>
>> ---
>>
>> bsp/ar71xx/.config | 3 +
>> bsp/board_ar71xx.bsp | 1 +
>> ...ils-tplink-safeloader-support-strings-as-.patch | 162 +++++++
>> ...1xx-add-support-for-TP-Link-Archer-C25-v1.patch | 483 +++++++++++++++++++++
>> ...ils-tplink-safeloader-add-TP-Link-Archer-.patch | 112 +++++
>> src/packages/fff/fff-network/Makefile | 2 +-
>> .../fff/fff-network/ar71xx/network.archer-c25-v1 | 8 +
>> 7 files changed, 770 insertions(+), 1 deletion(-)
>> create mode 100644 build_patches/openwrt/0005-firmware-utils-tplink-safeloader-support-strings-as-.patch
>> create mode 100644 build_patches/openwrt/0006-ar71xx-add-support-for-TP-Link-Archer-C25-v1.patch
>> create mode 100644 build_patches/openwrt/0007-firmware-utils-tplink-safeloader-add-TP-Link-Archer-.patch
>> create mode 100644 src/packages/fff/fff-network/ar71xx/network.archer-c25-v1
>>
>> diff --git a/bsp/ar71xx/.config b/bsp/ar71xx/.config
>> index 43d063c..b407f7d 100644
>> --- a/bsp/ar71xx/.config
>> +++ b/bsp/ar71xx/.config
>> @@ -6,6 +6,8 @@ CONFIG_TARGET_ar71xx_generic=y
>> CONFIG_TARGET_MULTI_PROFILE=y
>> CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_gl-ar150=y
>> CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_gl-ar150=""
>> +CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_archer-c25-v1=y
>> +CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_archer-c25-v1="-kmod-ath10k kmod-ath10k-ct -ath10k-firmware-qca9887 ath10k-firmware-qca9887-ct"
>> CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_archer-c7-v2=y
>> CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_archer-c7-v2="-kmod-ath10k kmod-ath10k-ct -ath10k-firmware-qca988x ath10k-firmware-qca988x-ct"
>> CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_cpe210-220=y
>> @@ -83,6 +85,7 @@ CONFIG_CLEAN_IPKG=y
>> # CONFIG_KERNEL_DEBUG_INFO is not set
>> # CONFIG_KERNEL_DEBUG_KERNEL is not set
>> # CONFIG_PACKAGE_ALFRED_VIS is not set
>> +CONFIG_PACKAGE_ath10k-firmware-qca9887-ct=m
>> CONFIG_PACKAGE_ath10k-firmware-qca988x-ct=m
>> CONFIG_PACKAGE_kmod-ath10k-ct=m
>> CONFIG_PACKAGE_kmod-hwmon-core=m
>> diff --git a/bsp/board_ar71xx.bsp b/bsp/board_ar71xx.bsp
>> index 6c541cc..1137b0d 100644
>> --- a/bsp/board_ar71xx.bsp
>> +++ b/bsp/board_ar71xx.bsp
>> @@ -31,4 +31,5 @@ images=("lede-ar71xx-generic-cpe210-220-squashfs-sysupgrade.bin"
>> "lede-ar71xx-generic-tl-wdr4300-v1-squashfs-sysupgrade.bin"
>> "lede-ar71xx-generic-tl-wdr4310-v1-squashfs-sysupgrade.bin"
>> "lede-ar71xx-generic-archer-c7-v2-squashfs-sysupgrade.bin"
>> + "lede-ar71xx-generic-archer-c25-v1-squashfs-sysupgrade.bin"
>> )
>> diff --git a/build_patches/openwrt/0005-firmware-utils-tplink-safeloader-support-strings-as-.patch b/build_patches/openwrt/0005-firmware-utils-tplink-safeloader-support-strings-as-.patch
>> new file mode 100644
>> index 0000000..78dee3d
>> --- /dev/null
>> +++ b/build_patches/openwrt/0005-firmware-utils-tplink-safeloader-support-strings-as-.patch
>> @@ -0,0 +1,162 @@
>> +From d0828f2bc391e0eff5240eb50de2d8eb0c9c1909 Mon Sep 17 00:00:00 2001
>> +From: Jan Niehusmann <jan at gondor.com>
>> +Date: Fri, 19 May 2017 09:42:24 +0200
>> +Subject: [PATCH 1/3] firmware-utils: tplink-safeloader: support strings as
>> + soft_version
>> +
>> +Some TP-Link routers (C25, C59, C60) contain a version string instead
>> +of a binary structure in the soft_version partition.
>> +
>> +Flashing LEDE from the original firmware's GUI, this version string
>> +taken from the soft_ver partition of the firmware image is written to
>> +the router's config partition.
>> +
>> +When using tftp recovery to go back to the original Archer C25 firmware,
>> +a version check compares that version to the version of the firmware to
>> +be flashed.
>> +
>> +Without proper contents in the config partition, reverting to the
>> +original firmware fails.
>> +
>> +Therefore, write the string "soft_ver:1.0.0\n" to that soft_ver
>> +partition.
>> +
>> +Signed-off-by: Jan Niehusmann <jan at gondor.com>
>> +[Rebased on v17.01.2]
>> +Signed-off-by: Tim Niemeyer <tim at tnx-x.org>
>> +---
>> + tools/firmware-utils/src/tplink-safeloader.c | 34 +++++++++++++++++++++++++++-
>> + 1 file changed, 33 insertions(+), 1 deletion(-)
>> +
>> +diff --git tools/firmware-utils/src/tplink-safeloader.c tools/firmware-utils/src/tplink-safeloader.c
>> +index 4e3d205..688cdac 100644
>> +--- tools/firmware-utils/src/tplink-safeloader.c
>> ++++ tools/firmware-utils/src/tplink-safeloader.c
>> +@@ -75,6 +75,7 @@ struct device_info {
>> + const char *vendor;
>> + const char *support_list;
>> + char support_trail;
>> ++ const char *soft_ver;
>> + const struct flash_partition_entry partitions[MAX_PARTITIONS+1];
>> + const char *first_sysupgrade_partition;
>> + const char *last_sysupgrade_partition;
>> +@@ -130,6 +131,7 @@ static struct device_info boards[] = {
>> + "CPE220(TP-LINK|US|N300-2):1.1\r\n"
>> + "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
>> + .support_trail = '\xff',
>> ++ .soft_ver = NULL,
>> +
>> + .partitions = {
>> + {"fs-uboot", 0x00000, 0x20000},
>> +@@ -167,6 +169,7 @@ static struct device_info boards[] = {
>> + "CPE520(TP-LINK|US|N300-5):1.1\r\n"
>> + "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
>> + .support_trail = '\xff',
>> ++ .soft_ver = NULL,
>> +
>> + .partitions = {
>> + {"fs-uboot", 0x00000, 0x20000},
>> +@@ -198,6 +201,7 @@ static struct device_info boards[] = {
>> + "WBS210(TP-LINK|US|N300-2):1.20\r\n"
>> + "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
>> + .support_trail = '\xff',
>> ++ .soft_ver = NULL,
>> +
>> + .partitions = {
>> + {"fs-uboot", 0x00000, 0x20000},
>> +@@ -229,6 +233,7 @@ static struct device_info boards[] = {
>> + "WBS510(TP-LINK|US|N300-5):1.20\r\n"
>> + "WBS510(TP-LINK|EU|N300-5):1.20\r\n",
>> + .support_trail = '\xff',
>> ++ .soft_ver = NULL,
>> +
>> + .partitions = {
>> + {"fs-uboot", 0x00000, 0x20000},
>> +@@ -259,6 +264,7 @@ static struct device_info boards[] = {
>> + "SupportList:\r\n"
>> + "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
>> + .support_trail = '\x00',
>> ++ .soft_ver = NULL,
>> +
>> + .partitions = {
>> + {"SBL1", 0x00000, 0x20000},
>> +@@ -303,6 +309,7 @@ static struct device_info boards[] = {
>> + "product_ver:2.0.0,"
>> + "special_id:00000000}\r\n",
>> + .support_trail = '\x00',
>> ++ .soft_ver = NULL,
>> +
>> + .partitions = {
>> + {"fs-uboot", 0x00000, 0x40000},
>> +@@ -337,6 +344,7 @@ static struct device_info boards[] = {
>> + "product_ver:1.0.0,"
>> + "special_id:00000000}\n",
>> + .support_trail = '\x00',
>> ++ .soft_ver = NULL,
>> +
>> + .partitions = {
>> + {"fs-uboot", 0x00000, 0x40000},
>> +@@ -369,6 +377,7 @@ static struct device_info boards[] = {
>> + "SupportList:\r\n"
>> + "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
>> + .support_trail = '\xff',
>> ++ .soft_ver = NULL,
>> +
>> + .partitions = {
>> + {"fs-uboot", 0x00000, 0x20000},
>> +@@ -398,6 +407,7 @@ static struct device_info boards[] = {
>> + "SupportList:\n"
>> + "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
>> + .support_trail = '\x00',
>> ++ .soft_ver = NULL,
>> +
>> + /**
>> + We use a bigger os-image partition than the stock images (and thus
>> +@@ -441,6 +451,7 @@ static struct device_info boards[] = {
>> + "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
>> + "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
>> + .support_trail = '\x00',
>> ++ .soft_ver = NULL,
>> +
>> + /**
>> + The flash partition table for RE450;
>> +@@ -569,6 +580,23 @@ static struct image_partition_entry make_soft_version(uint32_t rev) {
>> + return entry;
>> + }
>> +
>> ++static struct image_partition_entry make_soft_version_from_string(const char *soft_ver) {
>> ++ /** String length _including_ the terminating zero byte */
>> ++ uint32_t ver_len = strlen(soft_ver) + 1;
>> ++ /** Partition contains 64 bit header, the version string, and one additional null byte */
>> ++ size_t partition_len = 2*sizeof(uint32_t) + ver_len + 1;
>> ++ struct image_partition_entry entry = alloc_image_partition("soft-version", partition_len);
>> ++
>> ++ uint32_t *len = (uint32_t *)entry.data;
>> ++ len[0] = htonl(ver_len);
>> ++ len[1] = 0;
>> ++ memcpy(&len[2], soft_ver, ver_len);
>> ++
>> ++ entry.data[partition_len - 1] = 0;
>> ++
>> ++ return entry;
>> ++}
>> ++
>> + /** Generates the support-list partition */
>> + static struct image_partition_entry make_support_list(const struct device_info *info) {
>> + size_t len = strlen(info->support_list);
>> +@@ -799,7 +827,11 @@ static void build_image(const char *output,
>> + struct image_partition_entry parts[6] = {};
>> +
>> + parts[0] = make_partition_table(info->partitions);
>> +- parts[1] = make_soft_version(rev);
>> ++ if (info->soft_ver)
>> ++ parts[1] = make_soft_version_from_string(info->soft_ver);
>> ++ else
>> ++ parts[1] = make_soft_version(rev);
>> ++
>> + parts[2] = make_support_list(info);
>> + parts[3] = read_file("os-image", kernel_image, false);
>> + parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof);
>> +--
>> +2.1.4
>> +
>> diff --git a/build_patches/openwrt/0006-ar71xx-add-support-for-TP-Link-Archer-C25-v1.patch b/build_patches/openwrt/0006-ar71xx-add-support-for-TP-Link-Archer-C25-v1.patch
>> new file mode 100644
>> index 0000000..eaddb36
>> --- /dev/null
>> +++ b/build_patches/openwrt/0006-ar71xx-add-support-for-TP-Link-Archer-C25-v1.patch
>> @@ -0,0 +1,483 @@
>> +From 205e86e9b8492136a5283fa895220b4f3e05c6d3 Mon Sep 17 00:00:00 2001
>> +From: Ludwig Thomeczek <ledesrc at wxorx.net>
>> +Date: Sat, 22 Apr 2017 18:21:47 +0200
>> +Subject: [PATCH 2/3] ar71xx: add support for TP-Link Archer C25 v1
>> +
>> +The TP-Link Archer C25 is a low-cost dual-band router.
>> +
>> +Specification:
>> +
>> +- CPU: Atheros QCA9561 775 MHz
>> +- RAM: 64 MB
>> +- Flash: 8 MB
>> +- Wifi: 3x3 2.4 GHz (integrated), 1x1 5 GHz QCA9887
>> +- NET: 5x 10/100 Mbps Ethernet
>> +
>> +Some LEDs are controlled by an additional 74HC595 chip.
>> +
>> +Signed-off-by: Ludwig Thomeczek <ledesrc at wxorx.net>
>> +[minor code style fixes, boards alphabetical order fixes,
>> +reworked commit message]
>> +Signed-off-by: Piotr Dymacz <pepe2k at gmail.com>
>> +[Rebased on v17.01.2]
>> +Signed-off-by: Tim Niemeyer <tim at tnx-x.org>
>> +---
>> + target/linux/ar71xx/base-files/etc/board.d/01_leds | 9 +
>> + .../linux/ar71xx/base-files/etc/board.d/02_network | 1 +
>> + target/linux/ar71xx/base-files/etc/diag.sh | 1 +
>> + .../etc/hotplug.d/firmware/11-ath10k-caldata | 1 +
>> + target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
>> + .../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
>> + target/linux/ar71xx/config-4.4 | 1 +
>> + .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 +
>> + target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
>> + .../files/arch/mips/ath79/mach-archer-c25-v1.c | 227 +++++++++++++++++++++
>> + .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
>> + target/linux/ar71xx/image/tp-link.mk | 24 +++
>> + target/linux/ar71xx/mikrotik/config-default | 1 +
>> + target/linux/ar71xx/nand/config-default | 1 +
>> + 14 files changed, 283 insertions(+)
>> + create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
>> +
>> +diff --git target/linux/ar71xx/base-files/etc/board.d/01_leds target/linux/ar71xx/base-files/etc/board.d/01_leds
>> +index 0279dfc..3aa2bfb 100755
>> +--- target/linux/ar71xx/base-files/etc/board.d/01_leds
>> ++++ target/linux/ar71xx/base-files/etc/board.d/01_leds
>> +@@ -49,6 +49,15 @@ antrouter-r1)
>> + ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
>> + ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0"
>> + ;;
>> ++archer-c25-v1)
>> ++ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
>> ++ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
>> ++ ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
>> ++ ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10"
>> ++ ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
>> ++ ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
>> ++ ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
>> ++ ;;
>> + arduino-yun)
>> + ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
>> + ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
>> +diff --git target/linux/ar71xx/base-files/etc/board.d/02_network target/linux/ar71xx/base-files/etc/board.d/02_network
>> +index c8c7827..4404e80 100755
>> +--- target/linux/ar71xx/base-files/etc/board.d/02_network
>> ++++ target/linux/ar71xx/base-files/etc/board.d/02_network
>> +@@ -122,6 +122,7 @@ ar71xx_setup_interfaces()
>> + a60|\
>> + alfa-ap96|\
>> + alfa-nx|\
>> ++ archer-c25-v1|\
>> + dr344|\
>> + gl-ar150|\
>> + gl-ar300m|\
>> +diff --git target/linux/ar71xx/base-files/etc/diag.sh target/linux/ar71xx/base-files/etc/diag.sh
>> +index 7b8aac8..cf6278c 100644
>> +--- target/linux/ar71xx/base-files/etc/diag.sh
>> ++++ target/linux/ar71xx/base-files/etc/diag.sh
>> +@@ -47,6 +47,7 @@ get_status_led() {
>> + ap135-020)
>> + status_led="ap135:green:status"
>> + ;;
>> ++ archer-c25-v1|\
>> + mr12|\
>> + mr16|\
>> + nbg6616|\
>> +diff --git target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
>> +index b3e23c9..68f90de 100644
>> +--- target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
>> ++++ target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
>> +@@ -92,6 +92,7 @@ case "$FIRMWARE" in
>> + ath10kcal_extract "art" 20480 2116
>> + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
>> + ;;
>> ++ archer-c25-v1|\
>> + tl-wdr6500-v2)
>> + ath10kcal_extract "art" 20480 2116
>> + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
>> +diff --git target/linux/ar71xx/base-files/lib/ar71xx.sh target/linux/ar71xx/base-files/lib/ar71xx.sh
>> +index b035535..0d01c5e 100755
>> +--- target/linux/ar71xx/base-files/lib/ar71xx.sh
>> ++++ target/linux/ar71xx/base-files/lib/ar71xx.sh
>> +@@ -457,6 +457,9 @@ ar71xx_board_detect() {
>> + *AP90Q)
>> + name="ap90q"
>> + ;;
>> ++ *"Archer C25 v1")
>> ++ name="archer-c25-v1"
>> ++ ;;
>> + *"Archer C5")
>> + name="archer-c5"
>> + ;;
>> +diff --git target/linux/ar71xx/base-files/lib/upgrade/platform.sh target/linux/ar71xx/base-files/lib/upgrade/platform.sh
>> +index 580e09a..e2aaceb 100755
>> +--- target/linux/ar71xx/base-files/lib/upgrade/platform.sh
>> ++++ target/linux/ar71xx/base-files/lib/upgrade/platform.sh
>> +@@ -205,6 +205,7 @@ platform_check_image() {
>> + airrouter|\
>> + ap132|\
>> + ap90q|\
>> ++ archer-c25-v1|\
>> + bullet-m|\
>> + c-55|\
>> + carambola2|\
>> +diff --git target/linux/ar71xx/config-4.4 target/linux/ar71xx/config-4.4
>> +index ff6bb13..d9c7885 100644
>> +--- target/linux/ar71xx/config-4.4
>> ++++ target/linux/ar71xx/config-4.4
>> +@@ -50,6 +50,7 @@ CONFIG_ATH79_MACH_AP152=y
>> + # CONFIG_ATH79_MACH_AP81 is not set
>> + CONFIG_ATH79_MACH_AP90Q=y
>> + CONFIG_ATH79_MACH_AP96=y
>> ++CONFIG_ATH79_MACH_ARCHER_C25_V1=y
>> + CONFIG_ATH79_MACH_ARCHER_C7=y
>> + CONFIG_ATH79_MACH_ARDUINO_YUN=y
>> + CONFIG_ATH79_MACH_AW_NR580=y
>> +diff --git target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
>> +index 76ba6fa..d49659c 100644
>> +--- target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
>> ++++ target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
>> +@@ -1224,6 +1224,17 @@ config ATH79_MACH_BSB
>> + select ATH79_DEV_USB
>> + select ATH79_DEV_WMAC
>> +
>> ++config ATH79_MACH_ARCHER_C25_V1
>> ++ bool "TP-LINK Archer C25 v1 support"
>> ++ select SOC_QCA956X
>> ++ select ATH79_DEV_AP9X_PCI if PCI
>> ++ select ATH79_DEV_ETH
>> ++ select ATH79_DEV_GPIO_BUTTONS
>> ++ select ATH79_DEV_LEDS_GPIO
>> ++ select ATH79_DEV_M25P80
>> ++ select ATH79_DEV_WMAC
>> ++
>> ++
>> + config ATH79_MACH_ARCHER_C7
>> + bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
>> + select SOC_QCA955X
>> +diff --git target/linux/ar71xx/files/arch/mips/ath79/Makefile target/linux/ar71xx/files/arch/mips/ath79/Makefile
>> +index c91d03f..fc28716 100644
>> +--- target/linux/ar71xx/files/arch/mips/ath79/Makefile
>> ++++ target/linux/ar71xx/files/arch/mips/ath79/Makefile
>> +@@ -55,6 +55,7 @@ obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o
>> + obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
>> + obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
>> + obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
>> ++obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o
>> + obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
>> + obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
>> + obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
>> +diff --git target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
>> +new file mode 100644
>> +index 0000000..a0f001c
>> +--- /dev/null
>> ++++ target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
>> +@@ -0,0 +1,227 @@
>> ++/*
>> ++ * TP-Link Archer C25 v1 board support
>> ++ *
>> ++ * Copyright (C) 2017 Ludwig Thomeczek <ledesrc at wxorx.net>
>> ++ * based on mach-archer-c60/C59-v1.c
>> ++ * Copyright (C) 2016 Henryk Heisig <hyniu at o2.pl>
>> ++ *
>> ++ * This program is free software; you can redistribute it and/or modify it
>> ++ * under the terms of the GNU General Public License version 2 as published
>> ++ * by the Free Software Foundation.
>> ++ */
>> ++#include <linux/platform_device.h>
>> ++#include <linux/ath9k_platform.h>
>> ++#include <linux/ar8216_platform.h>
>> ++#include <asm/mach-ath79/ar71xx_regs.h>
>> ++#include <linux/gpio.h>
>> ++
>> ++#include "common.h"
>> ++#include "dev-m25p80.h"
>> ++#include "machtypes.h"
>> ++#include "pci.h"
>> ++#include "dev-ap9x-pci.h"
>> ++#include "dev-eth.h"
>> ++#include "dev-gpio-buttons.h"
>> ++#include "dev-leds-gpio.h"
>> ++#include "dev-spi.h"
>> ++#include "dev-usb.h"
>> ++#include "dev-wmac.h"
>> ++#include <linux/spi/spi_gpio.h>
>> ++#include <linux/spi/74x164.h>
>> ++
>> ++#define ARCHER_C25_GPIO_SHIFT_OE 21 /* OE, Output Enable */
>> ++#define ARCHER_C25_GPIO_SHIFT_SER 14 /* DS, Data Serial Input */
>> ++#define ARCHER_C25_GPIO_SHIFT_SRCLK 15 /* SHCP, Shift Reg Clock Input */
>> ++#define ARCHER_C25_GPIO_SHIFT_SRCLR 19 /* MR, Master Reset */
>> ++#define ARCHER_C25_GPIO_SHIFT_RCLK 16 /* STCP, Storage Reg Clock Input */
>> ++
>> ++#define ARCHER_C25_74HC_GPIO_BASE QCA956X_GPIO_COUNT
>> ++#define ARCHER_C25_74HC_GPIO_LED_WAN_AMBER 27
>> ++#define ARCHER_C25_74HC_GPIO_LED_WAN_GREEN 28
>> ++#define ARCHER_C25_74HC_GPIO_LED_WLAN2 29
>> ++#define ARCHER_C25_74HC_GPIO_LED_WLAN5 30
>> ++#define ARCHER_C25_74HC_GPIO_LED_LAN1 23
>> ++#define ARCHER_C25_74HC_GPIO_LED_LAN2 24
>> ++#define ARCHER_C25_74HC_GPIO_LED_LAN3 25
>> ++#define ARCHER_C25_74HC_GPIO_LED_LAN4 26
>> ++
>> ++#define ARCHER_C25_V1_SSR_BIT_0 0
>> ++#define ARCHER_C25_V1_SSR_BIT_1 1
>> ++#define ARCHER_C25_V1_SSR_BIT_2 2
>> ++#define ARCHER_C25_V1_SSR_BIT_3 3
>> ++#define ARCHER_C25_V1_SSR_BIT_4 4
>> ++#define ARCHER_C25_V1_SSR_BIT_5 5
>> ++#define ARCHER_C25_V1_SSR_BIT_6 6
>> ++#define ARCHER_C25_V1_SSR_BIT_7 7
>> ++
>> ++
>> ++#define ARCHER_C25_V1_KEYS_POLL_INTERVAL 20
>> ++#define ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL \
>> ++ (3 * ARCHER_C25_V1_KEYS_POLL_INTERVAL)
>> ++
>> ++#define ARCHER_C25_V1_GPIO_BTN_RESET 1
>> ++#define ARCHER_C25_V1_GPIO_BTN_RFKILL 22
>> ++
>> ++#define ARCHER_C25_V1_GPIO_LED_POWER 17
>> ++#define ARCHER_C25_V1_GPIO_LED_WPS 2
>> ++
>> ++#define ARCHER_C25_V1_WMAC_CALDATA_OFFSET 0x1000
>> ++
>> ++static struct spi_gpio_platform_data archer_c25_v1_spi_data = {
>> ++ .sck = ARCHER_C25_GPIO_SHIFT_SRCLK,
>> ++ .miso = SPI_GPIO_NO_MISO,
>> ++ .mosi = ARCHER_C25_GPIO_SHIFT_SER,
>> ++ .num_chipselect = 1,
>> ++};
>> ++
>> ++static u8 archer_c25_v1_ssr_initdata[] __initdata = {
>> ++ BIT(ARCHER_C25_V1_SSR_BIT_7) |
>> ++ BIT(ARCHER_C25_V1_SSR_BIT_6) |
>> ++ BIT(ARCHER_C25_V1_SSR_BIT_5) |
>> ++ BIT(ARCHER_C25_V1_SSR_BIT_4) |
>> ++ BIT(ARCHER_C25_V1_SSR_BIT_3) |
>> ++ BIT(ARCHER_C25_V1_SSR_BIT_2) |
>> ++ BIT(ARCHER_C25_V1_SSR_BIT_1)
>> ++};
>> ++
>> ++static struct gen_74x164_chip_platform_data archer_c25_v1_ssr_data = {
>> ++ .base = ARCHER_C25_74HC_GPIO_BASE,
>> ++ .num_registers = ARRAY_SIZE(archer_c25_v1_ssr_initdata),
>> ++ .init_data = archer_c25_v1_ssr_initdata,
>> ++};
>> ++
>> ++static struct platform_device archer_c25_v1_spi_device = {
>> ++ .name = "spi_gpio",
>> ++ .id = 1,
>> ++ .dev = {
>> ++ .platform_data = &archer_c25_v1_spi_data,
>> ++ },
>> ++};
>> ++
>> ++static struct spi_board_info archer_c25_v1_spi_info[] = {
>> ++ {
>> ++ .bus_num = 1,
>> ++ .chip_select = 0,
>> ++ .max_speed_hz = 10000000,
>> ++ .modalias = "74x164",
>> ++ .platform_data = &archer_c25_v1_ssr_data,
>> ++ .controller_data = (void *) ARCHER_C25_GPIO_SHIFT_RCLK,
>> ++ },
>> ++};
>> ++
>> ++static struct gpio_led archer_c25_v1_leds_gpio[] __initdata = {
>> ++ {
>> ++ .name = "archer-c25-v1:green:power",
>> ++ .gpio = ARCHER_C25_V1_GPIO_LED_POWER,
>> ++ .active_low = 1,
>> ++ }, {
>> ++ .name = "archer-c25-v1:green:wps",
>> ++ .gpio = ARCHER_C25_V1_GPIO_LED_WPS,
>> ++ .active_low = 1,
>> ++ }, {
>> ++ .name = "archer-c25-v1:green:wlan2g",
>> ++ .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN2,
>> ++ .active_low = 1,
>> ++ }, {
>> ++ .name = "archer-c25-v1:green:wlan5g",
>> ++ .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN5,
>> ++ .active_low = 1,
>> ++ }, {
>> ++ .name = "archer-c25-v1:green:lan1",
>> ++ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN1,
>> ++ .active_low = 1,
>> ++ }, {
>> ++ .name = "archer-c25-v1:green:lan2",
>> ++ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN2,
>> ++ .active_low = 1,
>> ++ }, {
>> ++ .name = "archer-c25-v1:green:lan3",
>> ++ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN3,
>> ++ .active_low = 1,
>> ++ }, {
>> ++ .name = "archer-c25-v1:green:lan4",
>> ++ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN4,
>> ++ .active_low = 1,
>> ++ }, {
>> ++ .name = "archer-c25-v1:green:wan",
>> ++ .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_GREEN,
>> ++ .active_low = 1,
>> ++ }, {
>> ++ .name = "archer-c25-v1:amber:wan",
>> ++ .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_AMBER,
>> ++ .active_low = 1,
>> ++ },
>> ++};
>> ++
>> ++static struct gpio_keys_button archer_c25_v1_gpio_keys[] __initdata = {
>> ++ {
>> ++ .desc = "Reset button",
>> ++ .type = EV_KEY,
>> ++ .code = KEY_RESTART,
>> ++ .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
>> ++ .gpio = ARCHER_C25_V1_GPIO_BTN_RESET,
>> ++ .active_low = 1,
>> ++ }, {
>> ++ .desc = "RFKILL button",
>> ++ .type = EV_KEY,
>> ++ .code = KEY_RFKILL,
>> ++ .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
>> ++ .gpio = ARCHER_C25_V1_GPIO_BTN_RFKILL,
>> ++ .active_low = 1,
>> ++ },
>> ++};
>> ++
>> ++static void __init archer_c25_v1_setup(void)
>> ++{
>> ++ u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0008);
>> ++ u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
>> ++
>> ++ ath79_register_m25p80(NULL);
>> ++
>> ++ spi_register_board_info(archer_c25_v1_spi_info,
>> ++ ARRAY_SIZE(archer_c25_v1_spi_info));
>> ++
>> ++ platform_device_register(&archer_c25_v1_spi_device);
>> ++
>> ++ gpio_request_one(ARCHER_C25_GPIO_SHIFT_OE,
>> ++ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
>> ++ "LED control");
>> ++
>> ++ gpio_request_one(ARCHER_C25_GPIO_SHIFT_SRCLR,
>> ++ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
>> ++ "LED reset");
>> ++
>> ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c25_v1_leds_gpio),
>> ++ archer_c25_v1_leds_gpio);
>> ++
>> ++ ath79_register_gpio_keys_polled(-1, ARCHER_C25_V1_KEYS_POLL_INTERVAL,
>> ++ ARRAY_SIZE(archer_c25_v1_gpio_keys),
>> ++ archer_c25_v1_gpio_keys);
>> ++
>> ++ ath79_register_mdio(0, 0x0);
>> ++ ath79_register_mdio(1, 0x0);
>> ++
>> ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
>> ++ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
>> ++
>> ++ /* WAN port */
>> ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
>> ++ ath79_eth0_data.speed = SPEED_100;
>> ++ ath79_eth0_data.duplex = DUPLEX_FULL;
>> ++ ath79_eth0_data.phy_mask = BIT(4);
>> ++ ath79_register_eth(0);
>> ++
>> ++ /* LAN ports */
>> ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
>> ++ ath79_eth1_data.speed = SPEED_1000;
>> ++ ath79_eth1_data.duplex = DUPLEX_FULL;
>> ++ ath79_switch_data.phy_poll_mask |= BIT(4);
>> ++ ath79_switch_data.phy4_mii_en = 1;
>> ++ ath79_register_eth(1);
>> ++
>> ++ ath79_register_wmac(art + ARCHER_C25_V1_WMAC_CALDATA_OFFSET, mac);
>> ++ ap91_pci_init(NULL, NULL);
>> ++}
>> ++
>> ++MIPS_MACHINE(ATH79_MACH_ARCHER_C25_V1, "ARCHER-C25-V1", "TP-LINK Archer C25 v1",
>> ++ archer_c25_v1_setup);
>> +diff --git target/linux/ar71xx/files/arch/mips/ath79/machtypes.h target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
>> +index b9a8e3e..53f0d1c 100644
>> +--- target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
>> ++++ target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
>> +@@ -39,6 +39,7 @@ enum ath79_mach_type {
>> + ATH79_MACH_AP152, /* Atheros AP152 reference board */
>> + ATH79_MACH_AP90Q, /* YunCore AP90Q */
>> + ATH79_MACH_AP96, /* Atheros AP96 */
>> ++ ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */
>> + ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
>> + ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
>> + ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
>> +diff --git target/linux/ar71xx/image/tp-link.mk target/linux/ar71xx/image/tp-link.mk
>> +index 1c88f43..f70c12c 100644
>> +--- target/linux/ar71xx/image/tp-link.mk
>> ++++ target/linux/ar71xx/image/tp-link.mk
>> +@@ -45,6 +45,14 @@ define Build/mktplinkfw-kernel
>> + @mv $@.new $@
>> + endef
>> +
>> ++define Build/uImageArcher
>> ++ mkimage -A $(LINUX_KARCH) \
>> ++ -O linux -T kernel \
>> ++ -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
>> ++ -n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
>> ++ @mv $@.new $@
>> ++endef
>> ++
>> + define Device/tplink
>> + TPLINK_HWREV := 0x1
>> + TPLINK_HEADER_VERSION := 1
>> +@@ -95,6 +103,22 @@ $(Device/tplink)
>> + IMAGE_SIZE := 15872k
>> + endef
>> +
>> ++define Device/archer-c25-v1
>> ++ DEVICE_TITLE := TP-LINK Archer C25 v1
>> ++ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887
>> ++ BOARDNAME := ARCHER-C25-V1
>> ++ TPLINK_BOARD_NAME := ARCHER-C25-V1
>> ++ DEVICE_PROFILE := ARCHERC25V1
>> ++ IMAGE_SIZE := 7808k
>> ++ LOADER_TYPE := elf
>> ++ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
>> ++ IMAGES := sysupgrade.bin factory.bin
>> ++ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
>> ++ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
>> ++ MTDPARTS := spi0.0:128k(factory-uboot)ro,64k(u-boot)ro,1536k(kernel),6272k(rootfs),128k(config)ro,64k(art)ro,7808k at 0x30000(firmware)
>> ++endef
>> ++TARGET_DEVICES += archer-c25-v1
>> ++
>> + define Device/cpe510-520
>> + DEVICE_TITLE := TP-LINK CPE510/520
>> + DEVICE_PACKAGES := rssileds
>> +diff --git target/linux/ar71xx/mikrotik/config-default target/linux/ar71xx/mikrotik/config-default
>> +index 44ea327..3f11c23 100644
>> +--- target/linux/ar71xx/mikrotik/config-default
>> ++++ target/linux/ar71xx/mikrotik/config-default
>> +@@ -15,6 +15,7 @@
>> + # CONFIG_ATH79_MACH_AP152 is not set
>> + # CONFIG_ATH79_MACH_AP90Q is not set
>> + # CONFIG_ATH79_MACH_AP96 is not set
>> ++# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
>> + # CONFIG_ATH79_MACH_ARCHER_C7 is not set
>> + # CONFIG_ATH79_MACH_ARDUINO_YUN is not set
>> + # CONFIG_ATH79_MACH_AW_NR580 is not set
>> +diff --git target/linux/ar71xx/nand/config-default target/linux/ar71xx/nand/config-default
>> +index 515266b..6357531 100644
>> +--- target/linux/ar71xx/nand/config-default
>> ++++ target/linux/ar71xx/nand/config-default
>> +@@ -8,6 +8,7 @@
>> + # CONFIG_ATH79_MACH_AP136 is not set
>> + # CONFIG_ATH79_MACH_AP147 is not set
>> + # CONFIG_ATH79_MACH_AP96 is not set
>> ++# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
>> + # CONFIG_ATH79_MACH_ARCHER_C7 is not set
>> + # CONFIG_ATH79_MACH_AW_NR580 is not set
>> + # CONFIG_ATH79_MACH_CAP324 is not set
>> +--
>> +2.1.4
>> +
>> diff --git a/build_patches/openwrt/0007-firmware-utils-tplink-safeloader-add-TP-Link-Archer-.patch b/build_patches/openwrt/0007-firmware-utils-tplink-safeloader-add-TP-Link-Archer-.patch
>> new file mode 100644
>> index 0000000..a9345bc
>> --- /dev/null
>> +++ b/build_patches/openwrt/0007-firmware-utils-tplink-safeloader-add-TP-Link-Archer-.patch
>> @@ -0,0 +1,112 @@
>> +From a0183cdf40fdb7e136c9ca8c74542e62f1f17278 Mon Sep 17 00:00:00 2001
>> +From: Ludwig Thomeczek <ledesrc at wxorx.net>
>> +Date: Sat, 13 May 2017 11:40:48 +0200
>> +Subject: [PATCH 3/3] firmware-utils: tplink-safeloader: add TP-Link Archer C25
>> + v1
>> +
>> +This adds the necessary firmware layout definitions for the Archer C25.
>> +It has an addtional partition containing some static data ("extra-para")
>> +without which no factory flash is possible, therefore put_data() has been
>> +added.
>> +
>> +Signed-off-by: Ludwig Thomeczek <ledesrc at wxorx.net>
>> +[Rebased on v17.01.2]
>> +Signed-off-by: Tim Niemeyer <tim at tnx-x.org>
>> +---
>> + tools/firmware-utils/src/tplink-safeloader.c | 59 +++++++++++++++++++++++++++-
>> + 1 file changed, 58 insertions(+), 1 deletion(-)
>> +
>> +diff --git tools/firmware-utils/src/tplink-safeloader.c tools/firmware-utils/src/tplink-safeloader.c
>> +index 688cdac..2468426 100644
>> +--- tools/firmware-utils/src/tplink-safeloader.c
>> ++++ tools/firmware-utils/src/tplink-safeloader.c
>> +@@ -299,6 +299,48 @@ static struct device_info boards[] = {
>> + .last_sysupgrade_partition = "file-system"
>> + },
>> +
>> ++ /** Firmware layout for the C25v1 */
>> ++ {
>> ++ .id = "ARCHER-C25-V1",
>> ++ .support_list =
>> ++ "SupportList:\n"
>> ++ "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
>> ++ "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
>> ++ "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
>> ++ .support_trail = '\x00',
>> ++ .soft_ver = "soft_ver:1.0.0\n",
>> ++
>> ++ /**
>> ++ We use a bigger os-image partition than the stock images (and thus
>> ++ smaller file-system), as our kernel doesn't fit in the stock firmware's
>> ++ 1MB os-image.
>> ++ */
>> ++ .partitions = {
>> ++ {"factory-boot", 0x00000, 0x20000},
>> ++ {"fs-uboot", 0x20000, 0x10000},
>> ++ {"os-image", 0x30000, 0x180000}, /* Stock: base 0x30000 size 0x100000 */
>> ++ {"file-system", 0x1b0000, 0x620000}, /* Stock: base 0x130000 size 0x6a0000 */
>> ++ {"user-config", 0x7d0000, 0x04000},
>> ++ {"default-mac", 0x7e0000, 0x00100},
>> ++ {"device-id", 0x7e0100, 0x00100},
>> ++ {"extra-para", 0x7e0200, 0x00100},
>> ++ {"pin", 0x7e0300, 0x00100},
>> ++ {"support-list", 0x7e0400, 0x00400},
>> ++ {"soft-version", 0x7e0800, 0x00400},
>> ++ {"product-info", 0x7e0c00, 0x01400},
>> ++ {"partition-table", 0x7e2000, 0x01000},
>> ++ {"profile", 0x7e3000, 0x01000},
>> ++ {"default-config", 0x7e4000, 0x04000},
>> ++ {"merge-config", 0x7ec000, 0x02000},
>> ++ {"qos-db", 0x7ee000, 0x02000},
>> ++ {"radio", 0x7f0000, 0x10000},
>> ++ {NULL, 0, 0}
>> ++ },
>> ++
>> ++ .first_sysupgrade_partition = "os-image",
>> ++ .last_sysupgrade_partition = "file-system",
>> ++ },
>> ++
>> + /** Firmware layout for the C5 */
>> + {
>> + .id = "ARCHER-C5-V2",
>> +@@ -643,6 +685,15 @@ static struct image_partition_entry read_file(const char *part_name, const char
>> + return entry;
>> + }
>> +
>> ++/** Creates a new image partition from arbitrary data */
>> ++static struct image_partition_entry put_data(const char *part_name, const char *datain, size_t len) {
>> ++
>> ++ struct image_partition_entry entry = alloc_image_partition(part_name, len);
>> ++
>> ++ memcpy(entry.data, datain, len);
>> ++
>> ++ return entry;
>> ++}
>> +
>> + /**
>> + Copies a list of image partitions into an image buffer and generates the image partition table while doing so
>> +@@ -824,7 +875,8 @@ static void build_image(const char *output,
>> + bool add_jffs2_eof,
>> + bool sysupgrade,
>> + const struct device_info *info) {
>> +- struct image_partition_entry parts[6] = {};
>> ++
>> ++ struct image_partition_entry parts[7] = {};
>> +
>> + parts[0] = make_partition_table(info->partitions);
>> + if (info->soft_ver)
>> +@@ -836,6 +888,11 @@ static void build_image(const char *output,
>> + parts[3] = read_file("os-image", kernel_image, false);
>> + parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof);
>> +
>> ++ if (strcasecmp(info->id, "ARCHER-C25-V1") == 0) {
>> ++ const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
>> ++ parts[5] = put_data("extra-para", mdat, 11);
>> ++ }
>> ++
>> + size_t len;
>> + void *image;
>> + if (sysupgrade)
>> +--
>> +2.1.4
>> +
>> diff --git a/src/packages/fff/fff-network/Makefile b/src/packages/fff/fff-network/Makefile
>> index fee3f98..d34016c 100644
>> --- a/src/packages/fff/fff-network/Makefile
>> +++ b/src/packages/fff/fff-network/Makefile
>> @@ -1,7 +1,7 @@
>> include $(TOPDIR)/rules.mk
>>
>> PKG_NAME:=fff-network
>> -PKG_VERSION:=0.0.6
>> +PKG_VERSION:=0.0.7
>> PKG_RELEASE:=1
>>
>> PKG_BUILD_DIR:=$(BUILD_DIR)/fff-network
>> diff --git a/src/packages/fff/fff-network/ar71xx/network.archer-c25-v1 b/src/packages/fff/fff-network/ar71xx/network.archer-c25-v1
>> new file mode 100644
>> index 0000000..e524545
>> --- /dev/null
>> +++ b/src/packages/fff/fff-network/ar71xx/network.archer-c25-v1
>> @@ -0,0 +1,8 @@
>> +WANDEV=eth0
>> +SWITCHDEV=eth1
>> +CLIENT_PORTS="1 2 0t"
>> +WAN_PORTS=""
>> +BATMAN_PORTS="3 4 0t"
>> +
>> +ETHMESHMAC=eth1
>> +ROUTERMAC=eth0
>>
>
>
>
-------------- nächster Teil --------------
Ein Dateianhang mit Binärdaten wurde abgetrennt...
Dateiname : signature.asc
Dateityp : application/pgp-signature
Dateigröße : 819 bytes
Beschreibung: OpenPGP digital signature
URL : <http://lists.freifunk.net/pipermail/franken-dev-freifunk.net/attachments/20170707/d5da4dfc/attachment.sig>
Mehr Informationen über die Mailingliste franken-dev