[PATCH v2 1/2] packages/fff-uradvd: new package to conf/start uradvd

[mayosemmel]

Hallo Tim,

ich habs mal getestet. Sieht sehr gut aus. Das Problem mit den
Nameservern ist nun auch weg. Hab auch mal mit Wireshark geschaut, ob da
noch was komisches in der Richtung passiert. Ist nicht der Fall.

Man sollte vor dem Login noch ein Forwarding einrichten, damit man sich
nicht gegen den falschen Router authentifiziert. Das hatte ich ja
schonmal angesprochen.

Aber ansonsten (ich hoffe ich darf das) :
Reviewed-by: Jan Kraus <mayosemmel at gmail.com>

Grüße Jan

Am Samstag, den 30.01.2016, 11:59 +0100 schrieb Tim Niemeyer:
> Signed-off-by: Tim Niemeyer <tim.niemeyer at mastersword.de>
> ---
> 
> Changes in v2:
> - fff-uradvd: new patch
> 
>  buildscript                                        |  2 +-
>  src/packages/fff/fff-uradvd/Makefile               | 40 ++++++++++++++++++++++
>  .../fff/fff-uradvd/files/etc/init.d/fff-uradvd     | 20 +++++++++++
>  3 files changed, 61 insertions(+), 1 deletion(-)
>  create mode 100644 src/packages/fff/fff-uradvd/Makefile
>  create mode 100755 src/packages/fff/fff-uradvd/files/etc/init.d/fff-uradvd
> 
> diff --git a/buildscript b/buildscript
> index f159f26..c60c49b 100755
> --- a/buildscript
> +++ b/buildscript
> @@ -31,7 +31,7 @@ OPENWRT_PKGS="gpioctl-sysfs libugpio fastd haserl"
>  BATMAN_ADV=(batman_adv
>              https://github.com/freifunk-gluon/packages.git
>              bdb56bba02168a7fdd7c8bbf380ae59a4febac7c)
> -BATMAN_ADV_PKGS="kmod-batman-adv-legacy micrond simple-tc"
> +BATMAN_ADV_PKGS="kmod-batman-adv-legacy micrond simple-tc uradvd"
>  
>  #official openwrt routing packages
>  ROUTING=(routing
> diff --git a/src/packages/fff/fff-uradvd/Makefile b/src/packages/fff/fff-uradvd/Makefile
> new file mode 100644
> index 0000000..0dce64c
> --- /dev/null
> +++ b/src/packages/fff/fff-uradvd/Makefile
> @@ -0,0 +1,40 @@
> +include $(TOPDIR)/rules.mk
> +
> +PKG_NAME:=fff-uradvd
> +PKG_VERSION:=1
> +PKG_RELEASE:=1
> +
> +PKG_BUILD_DIR:=$(BUILD_DIR)/fff-uradvd
> +
> +include $(INCLUDE_DIR)/package.mk
> +
> +define Package/fff-uradvd
> +    SECTION:=base
> +    CATEGORY:=Freifunk
> +    TITLE:= Freifunk-Franken uradvd
> +    URL:=http://www.freifunk-franken.de
> +    DEPENDS:=+uradvd
> +endef
> +
> +define Package/fff-uradvd/description
> +    This is the uradvd wrapper for the Freifunk Franken Firmware
> +    It is used to configure and start the uradvd daemon.
> +endef
> +
> +define Build/Prepare
> +	echo "all: " > $(PKG_BUILD_DIR)/Makefile
> +endef
> +
> +define Build/Configure
> +	# nothing
> +endef
> +
> +define Build/Compile
> +	# nothing
> +endef
> +
> +define Package/fff-uradvd/install
> +    $(CP) ./files/* $(1)/
> +endef
> +
> +$(eval $(call BuildPackage,fff-uradvd))
> diff --git a/src/packages/fff/fff-uradvd/files/etc/init.d/fff-uradvd b/src/packages/fff/fff-uradvd/files/etc/init.d/fff-uradvd
> new file mode 100755
> index 0000000..c9d8b9d
> --- /dev/null
> +++ b/src/packages/fff/fff-uradvd/files/etc/init.d/fff-uradvd
> @@ -0,0 +1,20 @@
> +#!/bin/sh /etc/rc.common
> +
> +START=50
> +
> +USE_PROCD=1
> +
> +SERVICE_WRITE_PID=1
> +SERVICE_DAEMONIZE=1
> +
> +URADVD_BIN=/usr/sbin/uradvd
> +
> +service_triggers()
> +{
> +        procd_add_reload_trigger "fff-uradvd"
> +}
> +
> +start_service() {
> +        procd_open_instance
> +        procd_set_param command "$URADVD_BIN" -i br-mesh -p $(uci get network.globals.ula_prefix)
> +}
> -- 
> 2.1.4
>