Problem beim Versuch eines fff-build

[mayosemmel]

Hallo Ralph,

steht ja eigentlich dort was ihm nicht passt.
Er findet md5 nicht.
Normal ist das in Ubuntu schon drin aber bei solchen Blackboxen weiß man
nie so genau. Notfalls halt einfach per Hand nachinstallieren.

Grüße Jan

Am Montag, den 25.01.2016, 18:58 +0100 schrieb Ralph A. Schmid, dk5ras:
> Moin,
> 
> ich habe hier eine recht dicke "black box" (eine MObilfunkbasisstation), mit
> einer i7-CPU und einem Ubuntu 12, also dachte ich, da kann ich zwecks
> Verringerung dere Build-Zeit mal ffffw bauen - aber nix da, ich scheitere
> wie unten zu sehen. Hat jemand eine Idee, was der noch von mir will?! :)
> Unnötig zu sagen, daß der gleiche Ablauf in meiner Kubuntu14-VM einfach so
> läuft.
> 
> openbts at Harry-Rev3-5150-BTS-2:~/firmware$ ./buildscript build debug
> Working with bsp/board_ar71xx.bsp and community/franken.cfg
> 
> Translating ./build/ar71xx/files/etc/fastdstart.sh.tpl ..
> Translating ./build/ar71xx/files/etc/config/firmware.tpl ..
> Translating ./build/ar71xx/files/etc/config/wireless.tpl ..
> Translating ./build/ar71xx/files/etc/config/system.tpl ..
> Translating ./build/ar71xx/files/etc/rc.local.tpl ..
> Collecting package info: done
> Collecting target info: done
> #
> # configuration written to .config
> #
> Collecting package info: done
> Collecting target info: done
> make[1]: Entering directory `/home/openbts/firmware/build/ar71xx'
> make[2]: Entering directory `/home/openbts/firmware/build/ar71xx'
> + mkdir -p
> /home/openbts/firmware/build/ar71xx/staging_dir/target-mips_34kc_uClibc-0.9.
> 33.2
> + cd
> /home/openbts/firmware/build/ar71xx/staging_dir/target-mips_34kc_uClibc-0.9.
> 33.2
> + mkdir -p bin lib include stamp
> mkdir -p
> /home/openbts/firmware/build/ar71xx/build_dir/target-mips_34kc_uClibc-0.9.33
> .2/stamp
> touch
> /home/openbts/firmware/build/ar71xx/staging_dir/target-mips_34kc_uClibc-0.9.
> 33.2/.prepared
> + mkdir -p /home/openbts/firmware/build/ar71xx/staging_dir/host
> + cd /home/openbts/firmware/build/ar71xx/staging_dir/host
> + mkdir -p bin lib include stamp
> mkdir -p /home/openbts/firmware/build/ar71xx/build_dir/host/stamp
> /home/openbts/firmware/build/ar71xx/staging_dir/host/include/sys
> install -m0644 /home/openbts/firmware/build/ar71xx/tools/include/*.h
> /home/openbts/firmware/build/ar71xx/staging_dir/host/include/
> install -m0644 /home/openbts/firmware/build/ar71xx/tools/include/sys/*.h
> /home/openbts/firmware/build/ar71xx/staging_dir/host/include/sys/
> ln -sf lib /home/openbts/firmware/build/ar71xx/staging_dir/host/lib64
> touch /home/openbts/firmware/build/ar71xx/staging_dir/host/.prepared
> /home/openbts/firmware/build/ar71xx/include/shell.sh: line 35: md5: command
> not found
> /home/openbts/firmware/build/ar71xx/include/shell.sh: line 35: md5: command
> not found
> /home/openbts/firmware/build/ar71xx/include/shell.sh: line 35: md5: command
> not found
> /home/openbts/firmware/build/ar71xx/include/shell.sh: line 35: md5: command
> not found
> /home/openbts/firmware/build/ar71xx/include/shell.sh: line 35: md5: command
> not found
> make[3]: Entering directory
> `/home/openbts/firmware/build/ar71xx/tools/patch'
> Makefile:21: *** target file
> `/home/openbts/firmware/build/ar71xx/build_dir/host/patch-2.7.5/.preparedpri
> nt' has both : and :: entries.  Stop.
> make[3]: Leaving directory `/home/openbts/firmware/build/ar71xx/tools/patch'
> make[2]: *** [tools/patch/compile] Error 2
> make[2]: Leaving directory `/home/openbts/firmware/build/ar71xx'
> make[1]: ***
> [/home/openbts/firmware/build/ar71xx/staging_dir/target-mips_34kc_uClibc-0.9
> .33.2/stamp/.tools_install_yynyynynynyyyyyyyyyyyyyyyyyyynyyyyynnyyynyyynnnyy
> ] Error 2
> make[1]: Leaving directory `/home/openbts/firmware/build/ar71xx'
> make: *** [world] Error 2
> cp: cannot stat
> `./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-ubnt-nano-m-squashfs-*.bin
> ': No such file or directory
> cp: cannot stat
> `./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr740n-v4-squashfs-*.bi
> n': No such file or directory
> cp: cannot stat
> `./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr741nd-v2-squashfs-*.b
> in': No such file or directory
> cp: cannot stat
> `./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr741nd-v4-squashfs-*.b
> in': No such file or directory
> cp: cannot stat
> `./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr841nd-v7-squashfs-*.b
> in': No such file or directory
> cp: cannot stat
> `./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr841n-v8-squashfs-*.bi
> n': No such file or directory
> cp: cannot stat
> `./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr841n-v9-squashfs-*.bi
> n': No such file or directory
> cp: cannot stat
> `./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr841n-v10-squashfs-*.b
> in': No such file or directory
> cp: cannot stat
> `./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr842n-v2-squashfs-*.bi
> n': No such file or directory
> cp: cannot stat
> `./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr1043nd-v1-squashfs-*.
> bin': No such file or directory
> cp: cannot stat
> `./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr1043nd-v2-squashfs-*.
> bin': No such file or directory
> cp: cannot stat
> `./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr1043nd-v3-squashfs-*.
> bin': No such file or directory
> cp: cannot stat
> `./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wa860re-v1-squashfs-*.b
> in': No such file or directory
> cp: cannot stat
> `./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wa850re-v1-squashfs-*.b
> in': No such file or directory
> openbts at Harry-Rev3-5150-BTS-2:~/firmware$
> 
> 
> --
> 
> Ralph A. Schmid
> Mondstr. 10
> 90762 Fürth
> +49-171-3631223
> ralph at schmid.xxx 
> http://www.bclog.de/ 
> 
> 
>