Problem beim Versuch eines fff-build

[Ralph A. Schmid, dk5ras]

Moin,

ich habe hier eine recht dicke "black box" (eine MObilfunkbasisstation), mit
einer i7-CPU und einem Ubuntu 12, also dachte ich, da kann ich zwecks
Verringerung dere Build-Zeit mal ffffw bauen - aber nix da, ich scheitere
wie unten zu sehen. Hat jemand eine Idee, was der noch von mir will?! :)
Unnötig zu sagen, daß der gleiche Ablauf in meiner Kubuntu14-VM einfach so
läuft.

openbts at Harry-Rev3-5150-BTS-2:~/firmware$ ./buildscript build debug
Working with bsp/board_ar71xx.bsp and community/franken.cfg

Translating ./build/ar71xx/files/etc/fastdstart.sh.tpl ..
Translating ./build/ar71xx/files/etc/config/firmware.tpl ..
Translating ./build/ar71xx/files/etc/config/wireless.tpl ..
Translating ./build/ar71xx/files/etc/config/system.tpl ..
Translating ./build/ar71xx/files/etc/rc.local.tpl ..
Collecting package info: done
Collecting target info: done
#
# configuration written to .config
#
Collecting package info: done
Collecting target info: done
make[1]: Entering directory `/home/openbts/firmware/build/ar71xx'
make[2]: Entering directory `/home/openbts/firmware/build/ar71xx'
+ mkdir -p
/home/openbts/firmware/build/ar71xx/staging_dir/target-mips_34kc_uClibc-0.9.
33.2
+ cd
/home/openbts/firmware/build/ar71xx/staging_dir/target-mips_34kc_uClibc-0.9.
33.2
+ mkdir -p bin lib include stamp
mkdir -p
/home/openbts/firmware/build/ar71xx/build_dir/target-mips_34kc_uClibc-0.9.33
.2/stamp
touch
/home/openbts/firmware/build/ar71xx/staging_dir/target-mips_34kc_uClibc-0.9.
33.2/.prepared
+ mkdir -p /home/openbts/firmware/build/ar71xx/staging_dir/host
+ cd /home/openbts/firmware/build/ar71xx/staging_dir/host
+ mkdir -p bin lib include stamp
mkdir -p /home/openbts/firmware/build/ar71xx/build_dir/host/stamp
/home/openbts/firmware/build/ar71xx/staging_dir/host/include/sys
install -m0644 /home/openbts/firmware/build/ar71xx/tools/include/*.h
/home/openbts/firmware/build/ar71xx/staging_dir/host/include/
install -m0644 /home/openbts/firmware/build/ar71xx/tools/include/sys/*.h
/home/openbts/firmware/build/ar71xx/staging_dir/host/include/sys/
ln -sf lib /home/openbts/firmware/build/ar71xx/staging_dir/host/lib64
touch /home/openbts/firmware/build/ar71xx/staging_dir/host/.prepared
/home/openbts/firmware/build/ar71xx/include/shell.sh: line 35: md5: command
not found
/home/openbts/firmware/build/ar71xx/include/shell.sh: line 35: md5: command
not found
/home/openbts/firmware/build/ar71xx/include/shell.sh: line 35: md5: command
not found
/home/openbts/firmware/build/ar71xx/include/shell.sh: line 35: md5: command
not found
/home/openbts/firmware/build/ar71xx/include/shell.sh: line 35: md5: command
not found
make[3]: Entering directory
`/home/openbts/firmware/build/ar71xx/tools/patch'
Makefile:21: *** target file
`/home/openbts/firmware/build/ar71xx/build_dir/host/patch-2.7.5/.preparedpri
nt' has both : and :: entries.  Stop.
make[3]: Leaving directory `/home/openbts/firmware/build/ar71xx/tools/patch'
make[2]: *** [tools/patch/compile] Error 2
make[2]: Leaving directory `/home/openbts/firmware/build/ar71xx'
make[1]: ***
[/home/openbts/firmware/build/ar71xx/staging_dir/target-mips_34kc_uClibc-0.9
.33.2/stamp/.tools_install_yynyynynynyyyyyyyyyyyyyyyyyyynyyyyynnyyynyyynnnyy
] Error 2
make[1]: Leaving directory `/home/openbts/firmware/build/ar71xx'
make: *** [world] Error 2
cp: cannot stat
`./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-ubnt-nano-m-squashfs-*.bin
': No such file or directory
cp: cannot stat
`./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr740n-v4-squashfs-*.bi
n': No such file or directory
cp: cannot stat
`./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr741nd-v2-squashfs-*.b
in': No such file or directory
cp: cannot stat
`./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr741nd-v4-squashfs-*.b
in': No such file or directory
cp: cannot stat
`./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr841nd-v7-squashfs-*.b
in': No such file or directory
cp: cannot stat
`./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr841n-v8-squashfs-*.bi
n': No such file or directory
cp: cannot stat
`./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr841n-v9-squashfs-*.bi
n': No such file or directory
cp: cannot stat
`./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr841n-v10-squashfs-*.b
in': No such file or directory
cp: cannot stat
`./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr842n-v2-squashfs-*.bi
n': No such file or directory
cp: cannot stat
`./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr1043nd-v1-squashfs-*.
bin': No such file or directory
cp: cannot stat
`./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr1043nd-v2-squashfs-*.
bin': No such file or directory
cp: cannot stat
`./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wr1043nd-v3-squashfs-*.
bin': No such file or directory
cp: cannot stat
`./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wa860re-v1-squashfs-*.b
in': No such file or directory
cp: cannot stat
`./build/ar71xx/bin/ar71xx/openwrt-ar71xx-generic-tl-wa850re-v1-squashfs-*.b
in': No such file or directory
openbts at Harry-Rev3-5150-BTS-2:~/firmware$


--

Ralph A. Schmid
Mondstr. 10
90762 Fürth
+49-171-3631223
ralph at schmid.xxx 
http://www.bclog.de/