Firmwaretest Nanostation
Tom Green
koe_fue at gmx.de
Sa Sep 12 13:20:42 CEST 2015
Hi,
also es ist kein FW-Problem.
v0.5 zeigt jetzt genau dieselben Zicken:
* falscher / alter Hostname
* Generiert ständig neue ssh-keys
Interessantes Fehlerbild.
Gruß
Torben
On 12.09.2015 12:24, Tom Green wrote:
> Hi,
>
> also frisch mit der devel-FW geflasht, keine Modifikationen, ausn Netmon
> gelöscht und wieder neu eingeführt -> dieselben Symptome. Lustigerweise
> funktioniert der FF tadellos, so als Client.
>
> hab noch nen dmesg und nen ifconfig. Ansonsten gehe ich jetzt für die
> Nano auf 0.5 zurück:
>
> VG
> Torben
>
> ---------------------------------------------------------
> root at schnatterente:~# ifconfig
> bat0 Link encap:Ethernet HWaddr 46:A9:D5:B1:B2:07
> inet6 addr: fe80::44a9:d5ff:feb1:b207/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:28060 errors:0 dropped:0 overruns:0 frame:0
> TX packets:663 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:2936760 (2.7 MiB) TX bytes:159738 (155.9 KiB)
>
> br-mesh Link encap:Ethernet HWaddr 68:72:51:26:90:44
> inet6 addr: fe80::6a72:51ff:fe26:9044/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:6488 errors:0 dropped:0 overruns:0 frame:0
> TX packets:642 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:472927 (461.8 KiB) TX bytes:158684 (154.9 KiB)
>
> eth0 Link encap:Ethernet HWaddr 68:72:51:27:90:44
> inet6 addr: fd00::6a72:51ff:fe27:9044/64 Scope:Global
> inet6 addr: fe80::6a72:51ff:fe27:9044/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:55797 errors:0 dropped:542 overruns:0 frame:0
> TX packets:47431 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:7661951 (7.3 MiB) TX bytes:6803034 (6.4 MiB)
> Interrupt:4
>
> eth1 Link encap:Ethernet HWaddr 6A:72:51:27:90:44
> UP BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:5
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:5
>
> ifb0 Link encap:Ethernet HWaddr 42:8D:CB:BE:AD:60
> inet6 addr: fe80::408d:cbff:febe:ad60/64 Scope:Link
> UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:5
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:65536 Metric:1
> RX packets:90 errors:0 dropped:0 overruns:0 frame:0
> TX packets:90 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:7380 (7.2 KiB) TX bytes:7380 (7.2 KiB)
>
> w2ap Link encap:Ethernet HWaddr 6A:72:51:26:90:44
> inet6 addr: fe80::6872:51ff:fe26:9044/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:5792 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 B) TX bytes:572875 (559.4 KiB)
>
> w2mesh Link encap:Ethernet HWaddr 68:72:51:26:90:44
> inet6 addr: fe80::6a72:51ff:fe26:9044/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1532 Metric:1
> RX packets:154595 errors:0 dropped:38 overruns:0 frame:0
> TX packets:104604 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:19384083 (18.4 MiB) TX bytes:15805386 (15.0 MiB)
>
> root at schnatterente:~# dmesg
> [ 0.000000] Linux version 3.10.49 (tst at quaddel) (gcc version 4.8.3
> (OpenWrt/Linaro GCC 4.8-2014.04 r46516) ) #1 Mon Sep 7 18:43:02 CEST 2015
> [ 0.000000] MyLoader: sysp=2bba22aa, boardp=abebaaab, parts=a2ababaa
> [ 0.000000] bootconsole [early0] enabled
> [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
> [ 0.000000] SoC: Atheros AR7241 rev 1
> [ 0.000000] Clocks: CPU:390.000MHz, DDR:390.000MHz, AHB:195.000MHz,
> Ref:5.000MHz
> [ 0.000000] Determined physical RAM map:
> [ 0.000000] memory: 02000000 @ 00000000 (usable)
> [ 0.000000] Initrd not found or empty - disabling initrd
> [ 0.000000] Zone ranges:
> [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
> [ 0.000000] On node 0 totalpages: 8192
> [ 0.000000] free_area_init_node: node 0, pgdat 802e8a90, node_mem_map
> 81000000
> [ 0.000000] Normal zone: 64 pages used for memmap
> [ 0.000000] Normal zone: 0 pages reserved
> [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
> [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32
> bytes.
> [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases,
> linesize 32 bytes
> [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
> [ 0.000000] pcpu-alloc: [0] 0
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 8128
> [ 0.000000] Kernel command line: board=UBNT-NM console=ttyS0,115200
> mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
> rootfstype=squashfs,jffs2 noinitrd
> [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
> [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
> [ 0.000000] Writing ErrCtl register=00000000
> [ 0.000000] Readback ErrCtl register=00000000
> [ 0.000000] Memory: 28912k/32768k available (2255k kernel code, 3856k
> reserved, 427k data, 260k init, 0k highmem)
> [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> [ 0.000000] NR_IRQS:51
> [ 0.060000] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
> [ 0.070000] pid_max: default: 32768 minimum: 301
> [ 0.070000] Mount-cache hash table entries: 512
> [ 0.080000] NET: Registered protocol family 16
> [ 0.090000] MIPS: machine is Ubiquiti Nanostation M
> [ 0.090000] registering PCI controller with io_map_base unset
> [ 0.500000] bio: create slab <bio-0> at 0
> [ 0.510000] PCI host bridge to bus 0000:00
> [ 0.510000] pci_bus 0000:00: root bus resource [mem
> 0x10000000-0x13ffffff]
> [ 0.520000] pci_bus 0000:00: root bus resource [io 0x0000]
> [ 0.520000] pci_bus 0000:00: No busn resource found for root bus,
> will use [bus 00-ff]
> [ 0.530000] pci 0000:00:00.0: [168c:002e] type 00 class 0x028000
> [ 0.530000] pci 0000:00:00.0: fixup device configuration
> [ 0.530000] pci 0000:00:00.0: reg 10: [mem 0x10000000-0x1000ffff 64bit]
> [ 0.530000] pci 0000:00:00.0: supports D1
> [ 0.530000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
> [ 0.530000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
> [ 0.530000] pci 0000:00:00.0: BAR 0: assigned [mem
> 0x10000000-0x1000ffff 64bit]
> [ 0.540000] pci 0000:00:00.0: using irq 40 for pin 1
> [ 0.540000] Switching to clocksource MIPS
> [ 0.550000] NET: Registered protocol family 2
> [ 0.550000] TCP established hash table entries: 512 (order: 0, 4096
> bytes)
> [ 0.560000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
> [ 0.570000] TCP: Hash tables configured (established 512 bind 512)
> [ 0.570000] TCP: reno registered
> [ 0.580000] UDP hash table entries: 256 (order: 0, 4096 bytes)
> [ 0.580000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
> [ 0.590000] NET: Registered protocol family 1
> [ 0.590000] PCI: CLS 0 bytes, default 32
> [ 0.610000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> [ 0.620000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
> (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
> [ 0.630000] msgmni has been set to 56
> [ 0.630000] io scheduler noop registered
> [ 0.640000] io scheduler deadline registered (default)
> [ 0.640000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
> [ 0.670000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
> [ 0.680000] console [ttyS0] enabled, bootconsole disabled
> [ 0.690000] ath79-spi ath79-spi: master is unqueued, this is deprecated
> [ 0.700000] m25p80 spi0.0: found mx25l6405d, expected m25p80
> [ 0.710000] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
> [ 0.710000] 5 cmdlinepart partitions found on MTD device spi0.0
> [ 0.720000] Creating 5 MTD partitions on "spi0.0":
> [ 0.720000] 0x000000000000-0x000000040000 : "u-boot"
> [ 0.730000] 0x000000040000-0x000000050000 : "u-boot-env"
> [ 0.740000] 0x000000050000-0x0000007b0000 : "firmware"
> [ 0.750000] 2 uimage-fw partitions found on MTD device firmware
> [ 0.760000] 0x000000050000-0x00000013f941 : "kernel"
> [ 0.760000] mtd: partition "kernel" must either start or end on erase
> block boundary or be smaller than an erase block -- forcing read-only
> [ 0.780000] 0x00000013f941-0x0000007b0000 : "rootfs"
> [ 0.780000] mtd: partition "rootfs" must either start or end on erase
> block boundary or be smaller than an erase block -- forcing read-only
> [ 0.800000] mtd: device 4 (rootfs) set to be root filesystem
> [ 0.800000] 1 squashfs-split partitions found on MTD device rootfs
> [ 0.810000] 0x000000350000-0x0000007b0000 : "rootfs_data"
> [ 0.820000] 0x0000007b0000-0x0000007f0000 : "cfg"
> [ 0.820000] 0x0000007f0000-0x000000800000 : "EEPROM"
> [ 0.840000] libphy: ag71xx_mdio: probed
> [ 1.390000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04
> [uid=004dd041, driver=Generic PHY]
> [ 1.400000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
> [ 1.960000] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
> [ 3.000000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
> [ 3.010000] TCP: cubic registered
> [ 3.010000] NET: Registered protocol family 17
> [ 3.010000] Bridge firewalling registered
> [ 3.020000] 8021q: 802.1Q VLAN Support v1.8
> [ 3.030000] VFS: Mounted root (squashfs filesystem) readonly on
> device 31:4.
> [ 3.040000] Freeing unused kernel memory: 260K (802ff000 - 80340000)
> [ 6.260000] usbcore: registered new interface driver usbfs
> [ 6.260000] usbcore: registered new interface driver hub
> [ 6.270000] usbcore: registered new device driver usb
> [ 6.280000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 6.290000] ehci-platform: EHCI generic platform driver
> [ 9.910000] jffs2_scan_eraseblock(): End of filesystem marker found
> at 0x10000
> [ 9.910000] jffs2_build_filesystem(): unlocking the mtd device... done.
> [ 15.540000] eth0: link up (100Mbps/Full duplex)
> [ 9.920000] jffs2_build_filesystem(): erasing all blocks after the
> end marker... done.
> [ 39.460000] jffs2: notice: (294) jffs2_build_xattr_subsystem:
> complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan)
> and 0 of xref (0 dead, 0 orphan) found.
> [ 39.550000] eth0: link down
> [ 41.520000] NET: Registered protocol family 10
> [ 41.530000] tun: Universal TUN/TAP device driver, 1.6
> [ 41.540000] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
> [ 41.550000] l2tp_core: L2TP core driver, V2.0
> [ 41.550000] l2tp_netlink: L2TP netlink interface
> [ 41.560000] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
> [ 41.570000] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
> [ 41.600000] nf_conntrack version 0.5.0 (455 buckets, 1820 max)
> [ 41.610000] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [ 41.660000] batman_adv: B.A.T.M.A.N. advanced 2013.4.0 (compatibility
> version 14) loaded
> [ 41.720000] u32 classifier
> [ 41.720000] input device check on
> [ 41.720000] Actions configured
> [ 41.730000] Mirror/redirect action on
> [ 41.760000] Failed to load ipt action
> [ 41.900000] arp_tables: (C) 2002 David S. Miller
> [ 41.910000] Loading modules backported from Linux version
> master-2014-05-22-0-gf2032ea
> [ 41.920000] Backport generated by backports.git
> backports-20140320-37-g5c33da0
> [ 41.980000] Ebtables v2.0 registered
> [ 41.980000] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 42.130000] xt_time: kernel timezone is -0000
> [ 42.180000] cfg80211: Calling CRDA to update world regulatory domain
> [ 42.180000] cfg80211: World regulatory domain updated:
> [ 42.190000] cfg80211: DFS Master region: unset
> [ 42.190000] cfg80211: (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp), (dfs_cac_time)
> [ 42.200000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
> (N/A, 2000 mBm), (N/A)
> [ 42.210000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz),
> (N/A, 2000 mBm), (N/A)
> [ 42.220000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
> (N/A, 2000 mBm), (N/A)
> [ 42.230000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz),
> (N/A, 2000 mBm), (N/A)
> [ 42.240000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz),
> (N/A, 2000 mBm), (0 s)
> [ 42.240000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz),
> (N/A, 2000 mBm), (0 s)
> [ 42.250000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz),
> (N/A, 2000 mBm), (N/A)
> [ 42.260000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
> (N/A, 0 mBm), (N/A)
> [ 42.450000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
> [ 42.460000] ath: EEPROM regdomain: 0x0
> [ 42.460000] ath: EEPROM indicates default country code should be used
> [ 42.460000] ath: doing EEPROM country->regdmn map search
> [ 42.460000] ath: country maps to regdmn code: 0x3a
> [ 42.460000] ath: Country alpha2 being used: US
> [ 42.460000] ath: Regpair used: 0x3a
> [ 42.490000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
> [ 42.490000] cfg80211: Calling CRDA for country: US
> [ 42.500000] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb0000000, irq=40
> [ 42.510000] cfg80211: Regulatory domain changed to country: US
> [ 42.510000] cfg80211: DFS Master region: FCC
> [ 42.520000] cfg80211: (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp), (dfs_cac_time)
> [ 42.530000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
> (N/A, 3000 mBm), (N/A)
> [ 42.530000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz),
> (N/A, 1700 mBm), (N/A)
> [ 42.540000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz),
> (N/A, 2300 mBm), (0 s)
> [ 42.550000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz),
> (N/A, 3000 mBm), (N/A)
> [ 42.560000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
> (N/A, 4000 mBm), (N/A)
> [ 53.020000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 55.630000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 55.650000] IPv6: ADDRCONF(NETDEV_UP): br-mesh: link is not ready
> [ 58.720000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
> [ 58.740000] device w2ap entered promiscuous mode
> [ 58.790000] br-mesh: port 1(w2ap) entered forwarding state
> [ 58.790000] br-mesh: port 1(w2ap) entered forwarding state
> [ 58.800000] IPv6: ADDRCONF(NETDEV_CHANGE): w2ap: link becomes ready
> [ 58.800000] IPv6: ADDRCONF(NETDEV_CHANGE): br-mesh: link becomes ready
> [ 59.050000] IPv6: ADDRCONF(NETDEV_UP): w2mesh: link is not ready
> [ 59.130000] w2mesh: Created IBSS using preconfigured BSSID
> 02:ca:ff:ee:ba:be
> [ 59.140000] w2mesh: Creating new IBSS network, BSSID 02:ca:ff:ee:ba:be
> [ 59.150000] IPv6: ADDRCONF(NETDEV_CHANGE): w2mesh: link becomes ready
> [ 59.930000] batman_adv: bat0: Adding interface: w2mesh
> [ 59.930000] batman_adv: bat0: Interface activated: w2mesh
> [ 60.790000] br-mesh: port 1(w2ap) entered forwarding state
> [ 76.590000] br-mesh: port 1(w2ap) entered disabled state
> [ 76.630000] device w2ap left promiscuous mode
> [ 76.630000] br-mesh: port 1(w2ap) entered disabled state
> [ 76.710000] device w2ap entered promiscuous mode
> [ 76.710000] br-mesh: port 1(w2ap) entered forwarding state
> [ 76.720000] br-mesh: port 1(w2ap) entered forwarding state
> [ 76.770000] br-mesh: port 1(w2ap) entered disabled state
> [ 76.810000] device w2ap left promiscuous mode
> [ 76.810000] br-mesh: port 1(w2ap) entered disabled state
> [ 76.820000] device w2ap entered promiscuous mode
> [ 76.880000] br-mesh: port 1(w2ap) entered forwarding state
> [ 76.880000] br-mesh: port 1(w2ap) entered forwarding state
> [ 76.890000] br-mesh: port 1(w2ap) entered disabled state
> [ 77.030000] device w2ap left promiscuous mode
> [ 77.030000] br-mesh: port 1(w2ap) entered disabled state
> [ 77.060000] device w2ap entered promiscuous mode
> [ 77.100000] br-mesh: port 1(w2ap) entered forwarding state
> [ 77.100000] br-mesh: port 1(w2ap) entered forwarding state
> [ 77.120000] br-mesh: port 1(w2ap) entered disabled state
> [ 77.120000] device w2ap left promiscuous mode
> [ 77.130000] br-mesh: port 1(w2ap) entered disabled state
> [ 77.180000] device w2ap entered promiscuous mode
> [ 77.190000] br-mesh: port 1(w2ap) entered forwarding state
> [ 77.190000] br-mesh: port 1(w2ap) entered forwarding state
> [ 77.230000] br-mesh: port 1(w2ap) entered disabled state
> [ 77.280000] device w2ap left promiscuous mode
> [ 77.290000] br-mesh: port 1(w2ap) entered disabled state
> [ 77.340000] device w2ap entered promiscuous mode
> [ 77.380000] br-mesh: port 1(w2ap) entered forwarding state
> [ 77.380000] br-mesh: port 1(w2ap) entered forwarding state
> [ 77.400000] br-mesh: port 1(w2ap) entered disabled state
> [ 77.400000] device w2ap left promiscuous mode
> [ 77.410000] br-mesh: port 1(w2ap) entered disabled state
> [ 77.450000] device w2ap entered promiscuous mode
> [ 77.490000] br-mesh: port 1(w2ap) entered forwarding state
> [ 77.490000] br-mesh: port 1(w2ap) entered forwarding state
> [ 77.510000] br-mesh: port 1(w2ap) entered disabled state
> [ 77.550000] device w2ap left promiscuous mode
> [ 77.560000] br-mesh: port 1(w2ap) entered disabled state
> [ 77.600000] device w2ap entered promiscuous mode
> [ 77.600000] br-mesh: port 1(w2ap) entered forwarding state
> [ 77.610000] br-mesh: port 1(w2ap) entered forwarding state
> [ 77.640000] br-mesh: port 1(w2ap) entered disabled state
> [ 77.640000] device w2ap left promiscuous mode
> [ 77.650000] br-mesh: port 1(w2ap) entered disabled state
> [ 77.940000] batman_adv: bat0: Interface deactivated: w2mesh
> [ 77.940000] batman_adv: bat0: Removing interface: w2mesh
> [ 86.180000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 87.230000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 87.250000] IPv6: ADDRCONF(NETDEV_UP): br-mesh: link is not ready
> [ 88.180000] eth0: link up (100Mbps/Full duplex)
> [ 88.180000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 88.370000] batman_adv: bat0: Adding interface: eth0
> [ 88.370000] batman_adv: bat0: The MTU of interface eth0 is too small
> (1500) to handle the transport of batman-adv packets. Packets going over
> this interface will be fragmented on layer2 which could impact the
> performance. Setting the MTU to 1528 would solve the problem.
> [ 88.400000] batman_adv: bat0: Interface activated: eth0
> [ 88.410000] device bat0 entered promiscuous mode
> [ 88.410000] br-mesh: port 1(bat0) entered forwarding state
> [ 88.420000] br-mesh: port 1(bat0) entered forwarding state
> [ 88.420000] IPv6: ADDRCONF(NETDEV_CHANGE): br-mesh: link becomes ready
> [ 89.060000] IPv6: ADDRCONF(NETDEV_UP): w2ap: link is not ready
> [ 89.130000] device w2ap entered promiscuous mode
> [ 89.130000] br-mesh: port 2(w2ap) entered forwarding state
> [ 89.140000] br-mesh: port 2(w2ap) entered forwarding state
> [ 89.190000] IPv6: ADDRCONF(NETDEV_CHANGE): w2ap: link becomes ready
> [ 89.540000] IPv6: ADDRCONF(NETDEV_UP): w2mesh: link is not ready
> [ 89.620000] w2mesh: Created IBSS using preconfigured BSSID
> 02:ca:ff:ee:ba:be
> [ 89.630000] w2mesh: Creating new IBSS network, BSSID 02:ca:ff:ee:ba:be
> [ 89.640000] IPv6: ADDRCONF(NETDEV_CHANGE): w2mesh: link becomes ready
> [ 90.220000] batman_adv: bat0: Adding interface: w2mesh
> [ 90.230000] batman_adv: bat0: Interface activated: w2mesh
> [ 90.420000] br-mesh: port 1(bat0) entered forwarding state
> [ 91.140000] br-mesh: port 2(w2ap) entered forwarding state
> [ 113.990000] br-mesh: received packet on bat0 with own address as
> source address
> [ 167.470000] br-mesh: received packet on bat0 with own address as
> source address
> [ 244.300000] br-mesh: received packet on bat0 with own address as
> source address
> [ 292.900000] br-mesh: received packet on bat0 with own address as
> source address
> [ 362.190000] br-mesh: received packet on bat0 with own address as
> source address
> [ 418.350000] br-mesh: received packet on bat0 with own address as
> source address
> [ 466.450000] br-mesh: received packet on bat0 with own address as
> source address
> [ 543.780000] br-mesh: received packet on bat0 with own address as
> source address
> [ 587.880000] br-mesh: received packet on bat0 with own address as
> source address
> [ 647.550000] br-mesh: received packet on bat0 with own address as
> source address
> [ 669.230000] br-mesh: received packet on bat0 with own address as
> source address
> [ 770.830000] br-mesh: received packet on bat0 with own address as
> source address
> [ 794.670000] br-mesh: received packet on bat0 with own address as
> source address
> [ 890.310000] br-mesh: received packet on bat0 with own address as
> source address
> [ 920.110000] br-mesh: received packet on bat0 with own address as
> source address
> [ 955.160000] br-mesh: received packet on bat0 with own address as
> source address
> [ 975.360000] net_ratelimit: 1 callbacks suppressed
> [ 975.370000] br-mesh: received packet on bat0 with own address as
> source address
> [ 976.230000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1045.560000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1101.940000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1171.000000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1225.460000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1246.480000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1296.440000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1367.010000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1421.880000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1471.040000] net_ratelimit: 94 callbacks suppressed
> [ 1494.150000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1521.860000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1547.310000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1619.030000] net_ratelimit: 10 callbacks suppressed
> [ 1619.030000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1672.740000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1738.550000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1798.190000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1800.690000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1802.690000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1819.040000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1821.040000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1864.270000] br-mesh: received packet on bat0 with own address as
> source address
> [ 1868.400000] br-mesh: received packet on bat0 with own address as
> source address
>
>
>
> On 12.09.2015 11:55, Tom Green wrote:
>> Also hab einen mal ganz mutig frisch mit der Entwicklung FW geflasht,
>> zumindest in dem Zeitfenster, in dem ich dran kam. Die Nano läuft also
>> ohne Modifikationen meinerseits.
>>
>> Es könnte auch sein, dass da was mit dem Key-Exchange was schief läuft
>> (Für Details hab ich einfach zu wenig Ahnung.):
>> MAC laut login /linklocal: 68:72:51:26:90:44
>> MAC im Netmon /Routeroptionen: 6872513087FF
>>
>> Da ich beide Nanos mal umbenannt (d.h. die Namen gegeneinander
>> getauscht). Werde mal beide mal ausn netmon löschen und neu einführen.
>>
>>
>> On 12.09.2015 11:28, Tom Green wrote:
>>> mmh... hab nen neuen ps:
>>>
>>> erst kam der api_csv_configurator.php, dann der /etc/configurator.sh und
>>> dann bye bye .. broken pipe.
>>>
>>> vielleicht hilft es ja.
>>>
>>>
>>> root at schnatterente:~# ps
>>> PID USER VSZ STAT COMMAND
>>> 1 root 1388 S /sbin/procd
>>> 2 root 0 SW [kthreadd]
>>> 3 root 0 SW [ksoftirqd/0]
>>> 4 root 0 SW [kworker/0:0]
>>> 5 root 0 SW< [kworker/0:0H]
>>> 7 root 0 SW< [khelper]
>>> 58 root 0 SW< [writeback]
>>> 61 root 0 SW< [bioset]
>>> 63 root 0 SW< [kblockd]
>>> 95 root 0 SW [kswapd0]
>>> 140 root 0 SW [fsnotify_mark]
>>> 154 root 0 SW< [ath79-spi]
>>> 234 root 0 SW< [deferwq]
>>> 237 root 0 SW [kworker/0:2]
>>> 248 root 0 SW [khubd]
>>> 296 root 0 SWN [jffs2_gcd_mtd5]
>>> 353 root 880 S /sbin/ubusd
>>> 354 root 772 S /sbin/askfirst ttyS0 /bin/ash --login
>>> 553 root 0 SW< [bat_events]
>>> 653 root 0 SW< [cfg80211]
>>> 779 root 1036 S /sbin/logd -S 16
>>> 799 root 1544 S /sbin/netifd
>>> 823 root 1360 S /usr/sbin/crond -f -c /etc/crontabs -l 5
>>> 847 root 1152 S /usr/sbin/dropbear -F -P
>>> /var/run/dropbear.1.pid -p 22 -K 300
>>> 914 root 1356 S httpd -h /tmp/crawldata
>>> 1066 root 1576 S /usr/sbin/hostapd -P /var/run/wifi-phy0.pid -B
>>> /var/run/hostapd-phy0.conf
>>> 1203 root 1356 S ntpd -p fe80::ff:feee:1%br-mesh
>>> 1718 root 0 SW [kworker/u2:0]
>>> 1842 root 0 SW [kworker/u2:2]
>>> 2091 root 0 SW [kworker/u2:1]
>>> 2092 root 1360 S /bin/sh -c sh /etc/fastdstart.sh; sh
>>> /etc/nodewatcher.sh; sh /etc/configurator.sh; sh /etc/wlanwatchdog.sh >>
>>> /var/l
>>> 2174 root 1372 S sh /etc/configurator.sh
>>> 2193 root 1368 S wget -T 5 -q -O -
>>> http://[fe80::ff:feee:1%br-mesh]/api_csv_configurator.php?section=autoadd_ipv6_address&authentific
>>> 2195 root 1220 R /usr/sbin/dropbear -F -P
>>> /var/run/dropbear.1.pid -p 22 -K 300
>>> 2196 root 1364 S -ash
>>> 2201 root 1360 R ps
>>> root at schnatterente:~#
>>>
>>>
>>> Mem: 21412K used, 7760K free, 0K shrd, 1984K buff, 6216K cached
>>> CPU: 7% usr 11% sys 0% nic 79% idle 0% io 0% irq 1% sirq
>>> Load average: 0.08 0.09 0.06 1/39 2307
>>> PID PPID USER STAT VSZ %VSZ %CPU COMMAND
>>> 1066 1 root S 1576 5% 1% /usr/sbin/hostapd -P
>>> /var/run/wifi-ph
>>> 1718 2 root SW 0 0% 1% [kworker/u2:0]
>>> 2195 847 root S 1220 4% 0% /usr/sbin/dropbear -F -P
>>> /var/run/dro
>>> 799 1 root S 1544 5% 0% /sbin/netifd
>>> 1 0 root S 1388 5% 0% /sbin/procd
>>> 2288 2206 root S 1372 5% 0% sh /etc/configurator.sh
>>> 2174 2092 root S 1372 5% 0% sh /etc/configurator.sh
>>> 2193 2174 root S 1368 5% 0% wget -T 5 -q -O -
>>> http://[fe80::ff:fe
>>> 2307 2288 root S 1368 5% 0% wget -T 5 -q -O -
>>> http://[fe80::ff:fe
>>> 2196 2195 root S 1364 5% 0% -ash
>>> 2205 2196 root R 1364 5% 0% top
>>> 823 1 root S 1360 5% 0% /usr/sbin/crond -f -c
>>> /etc/crontabs -
>>> 2092 823 root S 1360 5% 0% /bin/sh -c sh
>>> /etc/fastdstart.sh; sh
>>> 2206 823 root S 1360 5% 0% /bin/sh -c sh
>>> /etc/fastdstart.sh; sh
>>> 914 1 root S 1356 5% 0% httpd -h /tmp/crawldata
>>> 1203 1 root S 1356 5% 0% ntpd -p fe80::ff:feee:1%br-mesh
>>> 847 1 root S 1152 4% 0% /usr/sbin/dropbear -F -P
>>> /var/run/dro
>>> 779 1 root S 1036 4% 0% /sbin/logd -S 16
>>> 353 1 root S 880 3% 0% /sbin/ubusd
>>> Write failed: Broken pipe 772 3% 0% /sbin/askfirst ttyS0 /bin/ash
>>> --login
>>> torben at green:~$ ps
>>>
>>>
>>> On 12.09.2015 11:09, Tom Green wrote:
>>>> Hi,
>>>>
>>>> also denke es ist ssh, das den Ärger macht. Und ja, es sind beide Nanos.
>>>>
>>>> Auf einer hab ich meine Änderungen rückgängig machen können, ohne
>>>> Heilung. Die Modifikation ist die hier:
>>>> https://wiki.freifunk-franken.de/w/Hybrider_Access_Point_%28WPA2/privat_%2B_Freifunk%29.
>>>> Zumindest auf der alten FW lief sie.
>>>>
>>>> Es scheint ständig ein neuer ssh Key generiert zu werden, so dass das
>>>> Zeitfenster, in dem man drauf kann, recht klein ist. Jedenfalls kommt
>>>> die man-in-the-middle-attack Warnung fast jedes Einloggen.
>>>>
>>>> Ja, hab ein "ps". Unauffällig, bis auf die 3 dropbears. Auf dem wr841nd
>>>> v9 sind's "nur" 2. Weiß nicht, ob das was zu bedeuten hat.
>>>>
>>>> Den API-Key im Netmon hab ich gelöscht. Allerdings nach dem update.
>>>>
>>>> VG
>>>> Torben
>>>>
>>>> PID USER VSZ STAT COMMAND
>>>> 1 root 1388 S /sbin/procd
>>>> 2 root 0 SW [kthreadd]
>>>> 3 root 0 SW [ksoftirqd/0]
>>>> 5 root 0 SW< [kworker/0:0H]
>>>> 7 root 0 SW< [khelper]
>>>> 8 root 0 SW [kworker/u2:1]
>>>> 58 root 0 SW< [writeback]
>>>> 61 root 0 SW< [bioset]
>>>> 63 root 0 SW< [kblockd]
>>>> 90 root 0 SW [kworker/0:1]
>>>> 95 root 0 SW [kswapd0]
>>>> 140 root 0 SW [fsnotify_mark]
>>>> 154 root 0 SW< [ath79-spi]
>>>> 175 root 0 SW [kworker/u2:2]
>>>> 234 root 0 SW< [deferwq]
>>>> 237 root 0 SW [kworker/0:2]
>>>> 248 root 0 SW [khubd]
>>>> 295 root 0 SWN [jffs2_gcd_mtd5]
>>>> 352 root 880 S /sbin/ubusd
>>>> 353 root 772 S /sbin/askfirst ttyS0 /bin/ash --login
>>>> 550 root 0 SW< [bat_events]
>>>> 662 root 0 SW< [cfg80211]
>>>> 774 root 1036 S /sbin/logd -S 16
>>>> 794 root 1544 S /sbin/netifd
>>>> 819 root 1360 S /usr/sbin/crond -f -c /etc/crontabs -l 5
>>>> 842 root 1152 S /usr/sbin/dropbear -F -P
>>>> /var/run/dropbear.1.pid -p 22 -K 300
>>>> 909 root 1356 S httpd -h /tmp/crawldata
>>>> 1024 root 1360 S udhcpc -p /var/run/udhcpc-br-privnet.pid -s
>>>> /lib/netifd/dhcp.script -f -t 0 -i br-privnet -C
>>>> 1027 root 1360 S udhcpc -p /var/run/udhcpc-eth0.pid -s
>>>> /lib/netifd/dhcp.script -f -t 0 -i eth0 -C
>>>> 1249 root 1584 S /usr/sbin/hostapd -P /var/run/wifi-phy0.pid -B
>>>> /var/run/hostapd-phy0.conf
>>>> 1296 root 3160 S fastd -c /etc/fastd/fff/fff.conf -d --pid-file
>>>> /var/run/fastd.fff.pid
>>>> 1373 root 1356 S ntpd -p fe80::ff:feee:1%br-mesh
>>>> 1587 root 0 SW [kworker/u2:0]
>>>> 1773 root 1220 S /usr/sbin/dropbear -F -P
>>>> /var/run/dropbear.1.pid -p 22 -K 300
>>>> 1776 root 1364 S -ash
>>>> 1785 root 1220 S /usr/sbin/dropbear -F -P
>>>> /var/run/dropbear.1.pid -p 22 -K 300
>>>> 1945 root 1364 S -ash
>>>> 1969 root 1360 R ps
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On 12.09.2015 10:59, Tobias Klaus wrote:
>>>>> Hallo,
>>>>>
>>>>> Am Samstag, 12. September 2015, 10:24:50 schrieb Tom Green:
>>>>>> Hallo,
>>>>>>
>>>>>> also kann die positiven Ergebnisse für die Nanostation nicht nachvollziehen.
>>>>> Hmm komisch. Meine läuft tadellos ohne eines deiner Symptome.
>>>>> https://netmon.freifunk-franken.de//router.php?router_id=927
>>>>> Laut "Softwaredaten" muss die selbe Firmware installiert sein.
>>>>>
>>>>>> Die Nano läuft zwar mit der neuen FW, aber:
>>>>>>
>>>>>> * Zugriff per ssh gestaltet sich äußerst schwierig, zumal von der Nano
>>>>>> im 2 Minutentakt ein neuer ssh-key generiert wird
>>>>> Kommst du trotzdem drauf? Bei der Anzahl von Prozessen wäre die Ausgabe von
>>>>> einem "ps" ganz hilfreich. Logread natürlich auch.
>>>>>
>>>>>> * Im Netmon steht, dass die Anzahl der Prozesse stetig steigt und der
>>>>>> Arbeitsspeicher der Nanos gegen 0 tendiert
>>>>>> * Beide Nanos sind vom hostname auf Ihren alten Namen unbenannt worden.
>>>>> Das passiert wohl immer wenn man den API-Key im Netmon beim upgrade nicht
>>>>> löscht.
>>>>>
>>>>>> Ich das Ganze mit einer kleinen Benutzerspezifischen Änderung auf den
>>>>>> Weg gebracht, von der ich nicht glaube, dass sie die Nano abgeschossen
>>>>>> hat (zusätzliches verschlüsseltes Funknetz).
>>>>> Machen das beide? Und wie hast du die Änderung gemacht? ssh scheint ja nicht
>>>>> so richtig zu gehen. Oder hast du die Modifikation über sysconfig erhalten? Kann
>>>>> gut sein, dass das die Initialisierung etwas aus dem Tritt gebracht hat.
>>>>>
>>>>>> Ich hab ein bisschen den Eindruck, die Nanos sind in ihrer
>>>>>> Erstinstallationsroutine gefangen
>>>>>> (https://netmon.freifunk-franken.de//router.php?router_id=1151,
>>>>>> https://netmon.freifunk-franken.de//router.php?router_id=1150)
>>>>> Sieht echt sehr komisch aus. :-(
>>>>>
>>>>> Danke für die Rückmeldung. Wunder dich nicht, dass ich ab jetzt nicht mehr
>>>>> viel machen kann. Ich bin gerade auf dem Sprung in den Auslandsurlaub.
>>>>>
>>>>> Schöne Grüße
>>>>> Tobias
>>>>>
-------------- nächster Teil --------------
Ein Dateianhang mit HTML-Daten wurde abgetrennt...
URL: <http://lists.freifunk.net/pipermail/franken-dev-freifunk.net/attachments/20150912/f058d77e/attachment-0002.html>
Mehr Informationen über die Mailingliste franken-dev