[Patch-Request] 11n anschalten
Christian Dresel
fff at chrisi01.de
Fr Nov 6 21:34:43 CET 2015
Am 06.11.2015 um 16:41 schrieb Michael Fritscher:
> Hi,
>
> unsere Firmware verwendet derzeit KEIN 11n. Der Grund ist die fehlende Zeile
>
> option htmode HT20 im 1. Abschnitt der /etc/config/wireless. Damit wird
> 11n auf normalen 20 MHz Kanälen aktiviert.
>
> Viele Grüße,
> Michael
>
hi
damit hat sich dann auch diese Mail erledigt (die beschreibt nämlich
genau das Problem auch wenn ich die Ursache nicht direkt erkannt habe):
http://lists.freifunk.net/pipermail/franken-dev-freifunk.net/2015-November/001829.html
hab das ganze gerade hier auf 2 wr841nd und auf einer Nanostation
aktiviert, sieht so aus als würde es nun problemlos klappen:
root at OpenWrt:~# iw dev w2mesh station dump
Station 90:f6:52:b1:81:a2 (on w2mesh)
inactive time: 10 ms
rx bytes: 2346586
rx packets: 17356
tx bytes: 31172
tx packets: 185
tx retries: 48
tx failed: 0
signal: -54 [-54, -69] dBm
signal avg: -53 [-53, -69] dBm
tx bitrate: 72.2 MBit/s MCS 7 short GI
rx bitrate: 72.2 MBit/s MCS 7 short GI
authorized: yes
authenticated: yes
preamble: long
WMM/WME: yes
MFP: no
TDLS peer: no
Station 68:72:51:36:10:83 (on w2mesh)
inactive time: 0 ms
rx bytes: 1674358
rx packets: 12373
tx bytes: 861
tx packets: 16
tx retries: 11
tx failed: 0
signal: -76 [-92, -76] dBm
signal avg: -75 [-90, -75] dBm
tx bitrate: 144.4 MBit/s MCS 15 short GI
rx bitrate: 26.0 MBit/s MCS 9
authorized: yes
authenticated: yes
preamble: long
WMM/WME: yes
MFP: no
TDLS peer: no
root at OpenWrt:~#
Danke Michael für die Fehleranalyse und der Behebung :) Nun macht das
gleich viel mehr Spaß hier ;)
P.S. Wer pflegt das ins Gitdingsbums ein, ich doch nix Ahnung von dem
Zeug ;)
mfg
Christian
--
Kontaktmöglichkeiten ChristianD (Christian Dresel):
Jabber: christian at jabber.community
E-Mail: fff at chrisi01.de
Facebook: https://www.facebook.com/christian.chili
Handy/Whatsapp & Festnetz: auf Nachfrage
Mehr Informationen über die Mailingliste franken-dev