[PATCH v2 2/2] adds some basic packages

Tobias Klaus tk+ff at meskal.net
Di Jul 21 14:03:34 CEST 2015


Am Dienstag, 21. Juli 2015, 12:42:50 schrieb Tim Niemeyer:
> Hallo Tobias,
> 
> Gibt es von dir ein Signed-of?
Das kommt sehr auf die nächste Frage an.

> Und welcher Bedeutung wollen wir das Flag
> zukommen lassen?
Ich kenne den Umgang mit diesem Flag nicht so wirklich. Soweit ich das 
verstehe bekommt sie erst Bedeutung bis wir ein definieren. Wenn wir das 
Modell des Kernels[1] übernehmen, mache ich das für den ersten Patch(basic 
layout... ) sehr gern.
Bei diesem hier tue ich mir da schon etwas schwerer, da ich ja nur aus dem 
alten Repo übertragen habe. Vermutlich müsste ich dann noch dich, Tim, fragen 
ob ich die Rechte habe dieses ganze Zeug zu veröffentlichen? Ich habe nämlich 
keinen Überblick aus welchen Projekten mit welchen Lizenzen und welchen 
Autoren das alles stammt. Nur das nodewatcher script hat einen Lizenzheader...

Kommentare?

Grüsse
Tobias

PS: Tim welche Bedeutung gibst du dem Flag? Du nutzt es ja schon länger und 
recht oft.



[1] https://www.kernel.org/doc/Documentation/SubmittingPatches Punkt 11
> 
> * Tobias Klaus <tk+ff at meskal.net> [21-07-15 10:50]:
> > Date: Tue, 21 Jul 2015 10:50:22 +0200
> > From: Tobias Klaus <tk+ff at meskal.net>
> > To: franken-dev at freifunk.net
> > Subject: [PATCH v2 2/2] adds some basic packages
> > X-Envelope-From: tk+ff at meskal.net
> > X-Envelope-To: <franken-dev at freifunk.net>
> > X-Mailer: git-send-email 2.4.6
> > 
> > Basically these are just copies of old ffff-next with some whitespace
> > fixes.
> > No real functionality at the moment.
> > 
> > Not yet included:
> > * uci-defaults script to initialize openwrt during first boot
> > * a lot of other stuff
> > * everything else we talked about
> > * ...
> 
> Reviewed-by: Tim Niemeyer <tim.niemeyer at mastersword.de>
> 
> Tim
> 
> > ---
> > 
> >  README.md                                          |   6 +
> >  package.config                                     |   1 +
> >  packages/.keepdir                                  |   0
> >  packages/fastdstart/Makefile                       |  34 ++++
> >  packages/fastdstart/files/usr/sbin/fastdstart      |  96 ++++++++++
> >  packages/freifunk-franken/Makefile                 |  60 ++++++
> >  .../files/etc/hotplug.d/iface/30-fastd             |   5 +
> >  .../freifunk-franken/uci-defaults/99_installcron   |   6 +
> >  packages/nodewatcher/Makefile                      |  37 ++++
> >  packages/nodewatcher/files/etc/config/configurator |  24 +++
> >  packages/nodewatcher/files/etc/config/nodewatcher  |   6 +
> >  packages/nodewatcher/files/usr/sbin/configurator   | 172
> >  +++++++++++++++++
> >  packages/nodewatcher/files/usr/sbin/nodewatcher    | 210
> >  +++++++++++++++++++++ 13 files changed, 657 insertions(+)
> >  delete mode 100644 packages/.keepdir
> >  create mode 100644 packages/fastdstart/Makefile
> >  create mode 100755 packages/fastdstart/files/usr/sbin/fastdstart
> >  create mode 100644 packages/freifunk-franken/Makefile
> >  create mode 100644
> >  packages/freifunk-franken/files/etc/hotplug.d/iface/30-fastd create mode
> >  100644 packages/freifunk-franken/uci-defaults/99_installcron create mode
> >  100644 packages/nodewatcher/Makefile
> >  create mode 100644 packages/nodewatcher/files/etc/config/configurator
> >  create mode 100644 packages/nodewatcher/files/etc/config/nodewatcher
> >  create mode 100644 packages/nodewatcher/files/usr/sbin/configurator
> >  create mode 100755 packages/nodewatcher/files/usr/sbin/nodewatcher
> > 
> > diff --git a/README.md b/README.md
> > index e2f9d36..67acbf7 100644
> > --- a/README.md
> > +++ b/README.md
> > @@ -65,6 +65,12 @@ make menuconfig
> > 
> >  </pre>
> >  
> >  Now select the "Target System" and "Target Profile" for your AP model.
> > 
> > +Make sure, that you include one of the freifunk franken packages:
> > +
> > +freifunk-franken-basic
> > +or
> > +freifunk-franken-debug
> > +
> > 
> >  Finally start the build process
> >  <pre>
> > 
> > diff --git a/package.config b/package.config
> > index e69de29..b03faa5 100644
> > --- a/package.config
> > +++ b/package.config
> > @@ -0,0 +1 @@
> > +CONFIG_PACKAGE_freifunk-franken-basic=y
> > diff --git a/packages/.keepdir b/packages/.keepdir
> > deleted file mode 100644
> > index e69de29..0000000
> > diff --git a/packages/fastdstart/Makefile b/packages/fastdstart/Makefile
> > new file mode 100644
> > index 0000000..3a8312c
> > --- /dev/null
> > +++ b/packages/fastdstart/Makefile
> > @@ -0,0 +1,34 @@
> > +include $(TOPDIR)/rules.mk
> > +
> > +PKG_NAME:=fastdstart
> > +PKG_VERSION:=1.0.0
> > +PKG_VERSION:=1
> > +
> > +PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
> > +
> > +include $(INCLUDE_DIR)/package.mk
> > +
> > +define Package/fastdstart
> > +  SECTION:=net
> > +  CATEGORY:=Network
> > +  TITLE:=fastd key exchange
> > +  DEPENDS:=+fastd
> > +endef
> > +
> > +define Package/fastdstart/description
> > +	Simple script to exchange fastd keys and start fastd
> > +endef
> > +
> > +define Build/Prepare
> > +	echo "all: " > $(PKG_BUILD_DIR)/Makefile
> > +endef
> > +
> > +define Package/fastdstart/install
> > +	$(CP) ./files/* $(1)/
> > +	chmod +x $(1)/usr/sbin/fastdstart
> > +	mkdir -p $(1)/lib/cron
> > +	echo "#check for new vpn keys every 5 mins" >> 
$(1)/lib/cron/${PKG_NAME}
> > +	echo "*/5 * * * * /usr/sbin/fastdstart" >> $(1)/lib/cron/${PKG_NAME}
> > +endef
> > +
> > +$(eval $(call BuildPackage,fastdstart))
> > diff --git a/packages/fastdstart/files/usr/sbin/fastdstart
> > b/packages/fastdstart/files/usr/sbin/fastdstart new file mode 100755
> > index 0000000..cc2fe91
> > --- /dev/null
> > +++ b/packages/fastdstart/files/usr/sbin/fastdstart
> > @@ -0,0 +1,96 @@
> > +#!/bin/sh
> > +
> > +test -f /tmp/fastdstart.lock && exit 1
> > +
> > +touch /tmp/fastdstart.lock
> > +
> > +SERVER="no"
> > +#SERVERNAME="--servername--"
> > +
> > +project="fff2"
> > +
> > +test_ipv4_host1="mastersword.de" # Tims server
> > +test_ipv4_host2="8.8.8.8"        # Google DNS
> > +test_ipv6_host1="heise.de"       # heise Zeitschriftenverlag
> > +
> > +# Only do something with fastd when the router has internet connection
> > +if ping -w5 -c3 "$test_ipv4_host1" &>/dev/null ||
> > +   ping -w5 -c3 "$test_ipv4_host2" &>/dev/null ||
> > +   ping6 -w5 -c3 "$test_ipv6_host1" &>/dev/null; then
> > +	mac=$(awk '{ mac=toupper($1); gsub(":", "", mac); print mac }'
> > /sys/class/net/br-freifunk/address 2>/dev/null) +	if [ "$SERVER" = "no"
> > ]; then
> > +		hostname=$(cat /proc/sys/kernel/hostname)
> > +
> > +		if [ "$hostname" = "OpenWrt" ]; then
> > +			hostname=""
> > +		fi
> > +
> > +		if [ "$hostname" = "" ]; then
> > +			hostname=$mac
> > +		fi
> > +	else
> > +		hostname=$SERVERNAME
> > +	fi
> > +
> > +	if [ ! -d /etc/fastd ]; then
> > +		mkdir /etc/fastd
> > +	fi
> > +
> > +	if [ ! -d /etc/fastd/$project ]; then
> > +		mkdir /etc/fastd/$project
> > +
> > +		mkdir /tmp/fastd_${project}_peers
> > +		ln -s /tmp/fastd_${project}_peers /etc/fastd/$project/peers
> > +		echo "#!/bin/sh" > /etc/fastd/$project/up.sh
> > +		echo "ip link set up dev ${project}VPN" >> 
/etc/fastd/$project/up.sh
> > +		echo "echo enable >
> > /sys/devices/virtual/net/${project}VPN/batman_adv/no_rebroadcast" >>
> > /etc/fastd/$project/up.sh +		echo "batctl if add ${project}VPN" >>
> > /etc/fastd/$project/up.sh +		chmod +x /etc/fastd/$project/up.sh
> > +
> > +		secret=$(fastd --generate-key 2>&1 | grep -i secret | awk '{ 
print $2
> > }') +		echo "include peers from \"/etc/fastd/$project/peers\";" >>
> > /etc/fastd/${project}/${project}.conf +		echo "log to syslog level 
warn;"
> > >> /etc/fastd/${project}/${project}.conf +		echo "method \"null\";" 
>>
> > /etc/fastd/${project}/${project}.conf
> > +#		http://lists.nord-west.net/pipermail/freifunk-ol-dev/2013-July/000322
> > .html +#		echo "bind 0.0.0.0:10000;" >>
> > /etc/fastd/${project}/${project}.conf +		echo "interface
> > \"${project}VPN\";" >> /etc/fastd/${project}/${project}.conf +		echo 
"mtu
> > 1426;" >> /etc/fastd/${project}/${project}.conf
> > +		echo "secret \"$secret\";" >> 
/etc/fastd/${project}/${project}.conf
> > +		echo "on up \"/etc/fastd/${project}/up.sh\";" >>
> > /etc/fastd/${project}/${project}.conf +		echo "secure handshakes no;" 
>>
> > /etc/fastd/${project}/${project}.conf +	fi
> > +
> > +	if [ ! -d /tmp/fastd_${project}_peers ]; then
> > +		mkdir /tmp/fastd_${project}_peers
> > +	fi
> > +
> > +	pubkey=$(fastd -c /etc/fastd/$project/$project.conf --show-key
> > --machine-readable) +#	port=666
> > +
> > +
> > +#	fire up
> > +	if [ "$(/sbin/ifconfig -a | grep -i ethernet | grep $project)" = "" 
];
> > then +		/bin/rm /var/run/fastd.$project.pid
> > +		fastd -c /etc/fastd/$project/$project.conf -d --pid-file
> > /var/run/fastd.$project.pid +	fi
> > +
> > +#	register
> > +	wget -T15
> > "http://mastersword.de/~reddog/${project}/?mac=$mac&name=$hostname&port=$
> > port&key=$pubkey" -O /tmp/fastd_${project}_output +
> > +	filenames=$(awk '/^####/ { gsub(/^####/, "", $0); gsub(/.conf/, "", 
$0);
> > print $0; }' /tmp/fastd_${project}_output) +	for file in $filenames; do
> > +		awk "{ if(a) print }; /^####$file.conf$/{a=1}; /^$/{a=0};"
> > /tmp/fastd_${project}_output | sed 's/ float;/;/g' >
> > /etc/fastd/$project/peers/$file +		echo 'float yes;' >>
> > /etc/fastd/$project/peers/$file
> > +	done
> > +
> > +	#reload
> > +	kill -HUP $(cat /var/run/fastd.$project.pid)
> > +else
> > +	echo "Der Router kann keine Verbindung zum Fastdserver aufbauen"
> > +	echo "$0 macht nichts!"
> > +fi
> > +
> > +/bin/rm /tmp/fastdstart.lock
> > +
> > +exit 0
> > +# vim: noexpandtab
> > diff --git a/packages/freifunk-franken/Makefile
> > b/packages/freifunk-franken/Makefile new file mode 100644
> > index 0000000..cad486a
> > --- /dev/null
> > +++ b/packages/freifunk-franken/Makefile
> > @@ -0,0 +1,60 @@
> > +include $(TOPDIR)/rules.mk
> > +
> > +PKG_NAME:=freifunk-franken
> > +PKG_VERSION:=1.0.0
> > +PKG_RELEASE:=1
> > +
> > +PKG_BUILD_DIR:=$(BUILD_DIR)/freifunk
> > +
> > +include $(INCLUDE_DIR)/package.mk
> > +
> > +define Package/freifunk-franken-basic
> > +	SECTION:=base
> > +	CATEGORY:=Config
> > +	DEFAULT:=n
> > +	TITLE:= Freifunk-Franken Basic
> > +	URL:=http://freifunk-franken.de
> > +	DEPENDS:=+kmod-batman-adv     \
> > +	         +batctl              \
> > +	         +alfred              \
> > +	         +fastd               \
> > +	         +fastdstart          \
> > +	         +ip                  \
> > +	         +odhcpd              \
> > +	         +dnsmasq-dhcpv6      \
> > +	         +ebtables            \
> > +	         +kmod-ebtables-ipv4  \
> > +	         +kmod-ebtables-ipv6  \
> > +	         +haveged             \
> > +	         + at ATH_USER_REGD      \
> > +	         +nodewatcher
> > +endef
> > +
> > +define Build/Prepare
> > +	echo "all: " > $(PKG_BUILD_DIR)/Makefile
> > +endef
> > +
> > +define Package/freifunk-franken-basic/install
> > +	$(CP) ./files/* $(1)/
> > +	mkdir -p $(1)/lib/cron
> > +	echo "#reboot every 1 days at 04:05" >> $(1)/lib/cron/$(PKG_NAME)
> > +	echo "1 4 */5 * * /sbin/reboot" >> $(1)/lib/cron/$(PKG_NAME)
> > +endef
> > +
> > +define Package/freifunk-franken/conffiles
> > +	/etc/config/freifunk
> > +endef
> > +
> > +define Package/freifunk-franken-debug
> > +	SECTION:=base
> > +	CATEGORY:=Config
> > +	DEFAULT:=n
> > +	TITLE:=Freifunk-Franken with debug tools
> > +	DEPENDS:=+freifunk-franken-basic     \
> > +	         + at KMOD_BATMAN_ADV_DEBUG_LOG \
> > +	         +iperf                      \
> > +	         +tcpdump-mini
> > +endef
> > +
> > +$(eval $(call BuildPackage,freifunk-franken-basic))
> > +$(eval $(call BuildPackage,freifunk-franken-debug))
> > diff --git a/packages/freifunk-franken/files/etc/hotplug.d/iface/30-fastd
> > b/packages/freifunk-franken/files/etc/hotplug.d/iface/30-fastd new file
> > mode 100644
> > index 0000000..b1ea7bd
> > --- /dev/null
> > +++ b/packages/freifunk-franken/files/etc/hotplug.d/iface/30-fastd
> > @@ -0,0 +1,5 @@
> > +#!/bin/sh
> > +
> > +[ "$ACTION" = "ifup" -a "$DEVICE" = "br-wan" ] || exit 0
> > +
> > +/usr/sbin/fastdstart
> > diff --git a/packages/freifunk-franken/uci-defaults/99_installcron
> > b/packages/freifunk-franken/uci-defaults/99_installcron new file mode
> > 100644
> > index 0000000..33c7e46
> > --- /dev/null
> > +++ b/packages/freifunk-franken/uci-defaults/99_installcron
> > @@ -0,0 +1,6 @@
> > +#!/bin/bash
> > +
> > +cat /lib/cron/* /etc/crontabs/root
> > +
> > +#execute on every restart before initscripts
> > +exit 1
> > diff --git a/packages/nodewatcher/Makefile b/packages/nodewatcher/Makefile
> > new file mode 100644
> > index 0000000..fe4731e
> > --- /dev/null
> > +++ b/packages/nodewatcher/Makefile
> > @@ -0,0 +1,37 @@
> > +include $(TOPDIR)/rules.mk
> > +
> > +PKG_NAME:=nodewatcher
> > +PKG_VERSION:=1.0.0
> > +PKG_VERSION:=1
> > +
> > +PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
> > +
> > +include $(INCLUDE_DIR)/package.mk
> > +
> > +define Package/nodewatcher
> > +  SECTION:=net
> > +  CATEGORY:=Network
> > +  TITLE:=Nodewatcher: client component for Netmon
> > +  DEPENDS:=+uhttpd
> > +endef
> > +
> > +define Package/nodewatcher/description
> > +	Freifunk Oldenburg Nodewatcher used to provide status data for Netmon
> > +endef
> > +
> > +define Build/Prepare
> > +	echo "all: " > $(PKG_BUILD_DIR)/Makefile
> > +endef
> > +
> > +define Package/nodewatcher/install
> > +	$(CP) ./files/* $(1)/
> > +	chmod +x $(1)/usr/sbin/nodewatcher
> > +	chmod +x $(1)/usr/sbin/configurator
> > +	mkdir -p $(1)/lib/cron
> > +	echo "# netmon" >> $(1)/lib/cron/${PKG_NAME}
> > +	echo "*/5 * * * * /usr/sbin/nodewatcher; /usr/sbin/configurator" >>
> > $(1)/lib/cron/${PKG_NAME} +	mkdir -p $(1)/www/public
> > +	ln -s ../../tmp/node.data $(1)/www/public/node.data
> > +endef
> > +
> > +$(eval $(call BuildPackage,nodewatcher))
> > diff --git a/packages/nodewatcher/files/etc/config/configurator
> > b/packages/nodewatcher/files/etc/config/configurator new file mode 100644
> > index 0000000..83a2879
> > --- /dev/null
> > +++ b/packages/nodewatcher/files/etc/config/configurator
> > @@ -0,0 +1,24 @@
> > +config 'script'
> > +	option 'error_level' '0'
> > +	option 'logfile' '/var/log/configurator.log'
> > +	option 'version' '1'
> > +	option 'sync_hostname' '1'
> > +
> > +config 'api'
> > +	option 'ipv4_address' '1'
> > +	option 'ipv6_interface' 'br-mesh'
> > +	option 'ipv6_address' 'fd00:fff:2003::ff:feee:1'
> > +	option 'timeout' '5'
> > +	option 'retry' '5'
> > +	option 'api_key' '1'
> > +
> > +config 'crawl'
> > +	option 'method' 'hash'
> > +	option 'nickname' '1'
> > +	option 'password' '1'
> > +	option 'login_string' '1'
> > +	option 'router_id' '1'
> > +	option 'update_hash' '1'
> > +
> > +config 'netmon'
> > +	option 'autoadd_ipv6_address' '1'
> > diff --git a/packages/nodewatcher/files/etc/config/nodewatcher
> > b/packages/nodewatcher/files/etc/config/nodewatcher new file mode 100644
> > index 0000000..dfbaa11
> > --- /dev/null
> > +++ b/packages/nodewatcher/files/etc/config/nodewatcher
> > @@ -0,0 +1,6 @@
> > +config 'script'
> > +        option 'version' '25'
> > +	option 'error_level' '0'
> > +	option 'logfile' '/var/log/nodewatcher.log'
> > +	option 'data_file' '/tmp/node.data'
> > +
> > diff --git a/packages/nodewatcher/files/usr/sbin/configurator
> > b/packages/nodewatcher/files/usr/sbin/configurator new file mode 100644
> > index 0000000..850bcf8
> > --- /dev/null
> > +++ b/packages/nodewatcher/files/usr/sbin/configurator
> > @@ -0,0 +1,172 @@
> > +#!/bin/sh
> > +# Netmon Configurator (C) 2010-2012 Freifunk Oldenburg
> > +# Lizenz: GPL v3
> > +
> > +#Get the configuration from the uci configuration file
> > +#If it does not exists, then get it from a normal bash file with
> > variables. +if [ -f /etc/config/configurator ];then
> > +	API_IPV4_ADRESS=`uci get configurator. at api[0].ipv4_address`
> > +	API_IPV6_ADRESS=`uci get configurator. at api[0].ipv6_address`
> > +	API_IPV6_INTERFACE=`uci get configurator. at api[0].ipv6_interface`
> > +	API_TIMEOUT=`uci get configurator. at api[0].timeout`
> > +	API_RETRY=`uci get configurator. at api[0].retry`
> > +	SCRIPT_VERSION=`uci get configurator. at script[0].version`
> > +	SCRIPT_ERROR_LEVEL=`uci get configurator. at script[0].error_level`
> > +	SCRIPT_LOGFILE=`uci get configurator. at script[0].logfile`
> > +	SCRIPT_SYNC_HOSTNAME=`uci get configurator. at script[0].sync_hostname`
> > +	CRAWL_METHOD=`uci get configurator. at crawl[0].method`
> > +	CRAWL_ROUTER_ID=`uci get configurator. at crawl[0].router_id`
> > +	CRAWL_UPDATE_HASH=`uci get configurator. at crawl[0].update_hash`
> > +	CRAWL_NICKNAME=`uci get configurator. at crawl[0].nickname`
> > +	CRAWL_PASSWORD=`uci get configurator. at crawl[0].password`
> > +	AUTOADD_IPV6_ADDRESS=`uci get
> > configurator. at netmon[0].autoadd_ipv6_address` +else
> > +	. `dirname $0`/configurator_config
> > +fi
> > +
> > +API_RETRY=$(($API_RETRY - 1))
> > +
> > +if [ "$API_IPV4_ADRESS" != "1" ]; then
> > +	netmon_api=$API_IPV4_ADRESS
> > +else
> > +	netmon_api="[$API_IPV6_ADRESS"%"$API_IPV6_INTERFACE]"
> > +fi
> > +
> > +if [ "$SCRIPT_ERROR_LEVEL" -gt "1" ]; then
> > +	err() {
> > +		echo "$(date) [configurator]: $1" >> $SCRIPT_LOGFILE
> > +	}
> > +else
> > +	err() {
> > +		:
> > +	}
> > +fi
> > +
> > +sync_hostname() {
> > +	err "Syncing hostname"
> > +	api_return=$(wget -T $API_TIMEOUT -q -O -
> > "http://$netmon_api/api_csv_configurator.php?section=get_hostname&authent
> > ificationmethod=$CRAWL_METHOD&nickname=$CRAWL_NICKNAME&password=$CRAWL_PAS
> > SWORD&router_auto_update_hash=$CRAWL_UPDATE_HASH&router_id=$CRAWL_ROUTER_I
> > D") +	ret=${api_return%%,*}
> > +	if [ "$ret" != "success" ]; then
> > +		err "Ther was an error fetching the hostname"
> > +		exit 0
> > +	elif [ "$ret" = "success" ]; then
> > +		netmon_hostname=${api_return%,*}
> > +		netmon_hostname=${netmon_hostname#*,}
> > +
> > +		#check for valid hostname as specified in rfc 1123
> > +		#see http://stackoverflow.com/a/3824105
> > +		regex='^([a-zA-Z0-9]|[a-zA-Z0-9][a-zA-Z0-9\-]{0,61}[a-zA-Z0-9])'
> > +		regex=$regex'(\.([a-zA-Z0-9]|[a-zA-Z0-9][a-zA-Z0-9\-]{0,61}[a-zA-
Z0-9])
> > )*$' +		if [ "${#netmon_hostname}" -le "255" ]; then
> > +			if echo -n $netmon_hostname | egrep -q "$regex"; then
> > +				if [ "$netmon_hostname" != "`cat 
/proc/sys/kernel/hostname`" ]; then
> > +					err "Setting new hostname: $netmon_hostname"
> > +					uci set system. at system[0].hostname=$netmon_hostname
> > +					uci commit
> > +					echo $netmon_hostname > /proc/sys/kernel/hostname
> > +				else
> > +					err "Hostname is up to date"
> > +				fi
> > +			else
> > +				err "Hostname ist malformed"
> > +				exit 0
> > +			fi
> > +		else
> > +			err "Hostname exceeds the maximum length of 255 characters"
> > +			exit 0
> > +		fi
> > +	fi
> > +}
> > +
> > +assign_router() {
> > +	hostname=`cat /proc/sys/kernel/hostname`
> > +
> > +	#Choose right login String
> > +	#Here maybe a ; to much at the end..??
> > +	login_strings=$(awk '{ mac=toupper($1); gsub(":", "", mac); printf 
mac
> > ";" }' /sys/class/net/br-mesh/address /sys/class/net/eth0/address
> > /sys/class/net/ath0/address 2> /dev/null) +	ergebnis=$(wget -T
> > $API_TIMEOUT -q -O -
> > "http://$netmon_api/api_csv_configurator.php?section=test_login_strings&l
> > ogin_strings=$login_strings")
> > +	router_auto_assign_login_string=${ergebnis#*;}
> > +	ergebnis=${ergebnis%;*}
> > +	if [ "$ergebnis" = "error" ]; then
> > +		router_auto_assign_login_string=${login_strings%%;*}
> > +		err "A router with this login string does not exist: 
$login_strings"
> > +		err "Using $router_auto_assign_login_string as login string"
> > +	fi
> > +
> > +	#Try to assign Router with choosen login string
> > +	ergebnis=$(wget -T $API_TIMEOUT -q -O -
> > "http://$netmon_api/api_csv_configurator.php?section=router_auto_assign&r
> > outer_auto_assign_login_string=$router_auto_assign_login_string&hostname=$
> > hostname") +	ret=${ergebnis%%;*}
> > +	errstr=${ergebnis#*;}
> > +	errstr=${errstr%%;*}
> > +	if [ "$ret" != "success" ]; then
> > +		err "The router has not been assigned to a router in Netmon"
> > +		err "Failure on router_auto_assign: $errstr. Exiting"
> > +		exit 0
> > +	elif [ "$ret" = "success" ]; then
> > +		update_hash=${ergebnis%;*;*}
> > +		update_hash=${update_hash##*;}
> > +		api_key=${ergebnis##*;}
> > +		#write new config
> > +		uci set configurator. at crawl[0].router_id=$errstr
> > +		uci set configurator. at crawl[0].update_hash=$update_hash
> > +		uci set configurator. at api[0].api_key=$api_key
> > +		#set also new router id for nodewatcher
> > +		#uci set nodewatcher. at crawl[0].router_id=$errstr
> > +
> > +		err "The router $errstr has been assigned with a router in 
Netmon"
> > +		uci commit
> > +
> > +		CRAWL_METHOD=`uci get configurator. at crawl[0].method`
> > +		CRAWL_ROUTER_ID=$errstr
> > +		CRAWL_UPDATE_HASH=$update_hash
> > +		CRAWL_NICKNAME=`uci get configurator. at crawl[0].nickname`
> > +		CRAWL_PASSWORD=`uci get configurator. at crawl[0].password`
> > +	fi
> > +}
> > +
> > +autoadd_ipv6_address() {
> > +	err "Doing IPv6 autoadd"
> > +	ipv6_link_local_addr=$(ip addr show dev br-mesh scope link | awk
> > '/inet6/{print $2}')
> > +	ipv6_link_local_netmask=${ipv6_link_local_addr##*/}
> > +	ipv6_link_local_addr=${ipv6_link_local_addr%%/*}
> > +	ergebnis=$(wget -T $API_TIMEOUT -q -O -
> > "http://$netmon_api/api_csv_configurator.php?section=autoadd_ipv6_address
> > &authentificationmethod=$CRAWL_METHOD&nickname=$CRAWL_NICKNAME&password=$C
> > RAWL_PASSWORD&router_auto_update_hash=$CRAWL_UPDATE_HASH&router_id=$CRAWL_
> > ROUTER_ID&networkinterface_name=br-mesh&ip=$ipv6_link_local_addr&netmask=$
> > ipv6_link_local_netmask&ipv=6") +	ret=${ergebnis%%,*}
> > +	if [ "$ret" = "success" ]; then
> > +		uci set configurator. at netmon[0].autoadd_ipv6_address='0'
> > +		uci commit
> > +		err "The IPv6 address of the router $CRAWL_ROUTER_ID has been 
added to
> > the router in Netmon" +		err "IPv6 Autoadd has been disabled cause it is
> > no longer necesarry" +	else
> > +		routerid=${ergebnis##*,}
> > +		if [ "$routerid" = "$CRAWL_ROUTER_ID" ]; then
> > +			err "The IPv6 address already exists in Netmon on this 
router. Maybe
> > because of a previos assignment" +			uci set
> > configurator. at netmon[0].autoadd_ipv6_address='0'
> > +			uci commit
> > +			err "IPv6 Autoadd has been disabled cause it is no longer 
necesarry"
> > +		else
> > +			err "The IPv6 address already exists in Netmon on another 
router
> > $routerid" +		fi
> > +	fi
> > +}
> > +
> > +if [ "$CRAWL_METHOD" = "login" ]; then
> > +	err "Authentification method is: username and passwort"
> > +elif [ "$CRAWL_METHOD" = "hash" ]; then
> > +	err "Authentification method: autoassign and hash"
> > +	err "Checking if the router is already assigned to a router in 
Netmon"
> > +	if [ "$CRAWL_UPDATE_HASH" = "1" ]; then
> > +		err "The router is not assigned to a router in Netmon"
> > +		err "Trying to assign the router"
> > +		assign_router
> > +	else
> > +		err "The router is already assigned to a router in Netmon"
> > +	fi
> > +fi
> > +
> > +if [ "$AUTOADD_IPV6_ADDRESS" = "1" ]; then
> > +	autoadd_ipv6_address
> > +fi
> > +
> > +if [ "$SCRIPT_SYNC_HOSTNAME" = "1" ]; then
> > +	sync_hostname
> > +fi
> > diff --git a/packages/nodewatcher/files/usr/sbin/nodewatcher
> > b/packages/nodewatcher/files/usr/sbin/nodewatcher new file mode 100755
> > index 0000000..6406518
> > --- /dev/null
> > +++ b/packages/nodewatcher/files/usr/sbin/nodewatcher
> > @@ -0,0 +1,210 @@
> > +#!/bin/sh
> > +# Netmon Nodewatcher (C) 2010-2012 Freifunk Oldenburg
> > +# License; GPL v3
> > +
> > +SCRIPT_VERSION="30"
> > +
> > +#Get the configuration from the uci configuration file
> > +#If it does not exists, then get it from a normal bash file with
> > variables. +if [ -f /etc/config/nodewatcher ];then
> > +	SCRIPT_ERROR_LEVEL=`uci get nodewatcher. at script[0].error_level`
> > +	SCRIPT_LOGFILE=`uci get nodewatcher. at script[0].logfile`
> > +	SCRIPT_DATA_FILE=`uci get nodewatcher. at script[0].data_file`
> > +	CLIENT_INTERFACES=`uci get nodewatcher. at network[0].client_interfaces`
> > +else
> > +	. `dirname $0`/nodewatcher_config
> > +fi
> > +
> > +if [ $SCRIPT_ERROR_LEVEL -gt "1" ]; then
> > +    err() {
> > +        echo $1 >> $SCRIPT_LOGFILE
> > +    }
> > +else
> > +    err() {
> > +        :
> > +    }
> > +fi
> > +
> > +#this method checks id the logfile has bekome too big and deletes the
> > first X lines +delete_log() {
> > +	if [ -f $SCRIPT_LOGFILE ]; then
> > +		if [ `ls -la $SCRIPT_LOGFILE | awk '{ print $5 }'` -gt "6000" ]; 
then
> > +			sed -i '1,60d' $SCRIPT_LOGFILE
> > +            err "`date`: Logfile has been made smaller"
> > +		fi
> > +	fi
> > +}
> > +
> > +#this method generates the crawl data xml file that is beeing fetched by
> > netmon +#and provided by a small local httpd
> > +crawl() {
> > +	#Get system data from other locations
> > +    err "`date`: Collecting basic system status data"
> > +    hostname="$(cat /proc/sys/kernel/hostname)"
> > +	uptime=$(awk '{ printf 
"<uptime>"$1"</uptime><idletime>"$2"</idletime>"
> > }' /proc/uptime) +
> > +    memory=$(awk '
> > +        /^MemTotal/ { printf "<memory_total>"$2"</memory_total>" }
> > +        /^Cached:/ { printf "<memory_caching>"$2"</memory_caching>" }
> > +        /^Buffers/ { printf "<memory_buffering>"$2"</memory_buffering>" }
> > +        /^MemFree/ { printf "<memory_free>"$2"</memory_free>" }
> > +    ' /proc/meminfo)
> > +	cpu=$(awk -F': ' '
> > +        /model/ { printf "<cpu>"$2"</cpu>" }
> > +        /system type/ { printf "<chipset>"$2"</chipset>" }
> > +    ' /proc/cpuinfo)
> > +	local_time="`date +%s`"
> > +	load=$(awk '{ printf
> > "<loadavg>"$3"</loadavg><processes>"$4"</processes>" }' /proc/loadavg) +
> > +    err "`date`: Collecting version information"
> > +
> > +    batman_adv_version=$(cat /sys/module/batman_adv/version)
> > +	kernel_version=$(uname -r)
> > +	fastd_version=$(fastd -v | awk '{ print $2 }')
> > +	nodewatcher_version=$SCRIPT_VERSION
> > +
> > +    # example for /etc/openwrt_release:
> > +    #DISTRIB_ID="OpenWrt"
> > +    #DISTRIB_RELEASE="Attitude Adjustment"
> > +    #DISTRIB_REVISION="r35298"
> > +    #DISTRIB_CODENAME="attitude_adjustment"
> > +    #DISTRIB_TARGET="atheros/generic"
> > +    #DISTRIB_DESCRIPTION="OpenWrt Attitude Adjustment 12.09-rc1"
> > +	. /etc/openwrt_release
> > +    distname=$DISTRIB_ID
> > +    distversion=$DISTRIB_RELEASE
> > +
> > +    # example for /etc/firmware_release:
> > +    #FIRMWARE_VERSION="95f36685e7b6cbf423f02cf5c7f1e785fd4ccdae-dirty"
> > +    #RELEASE_DATE="build date: Di 29. Jan 19:33:34 CET 2013"
> > +    #FIRMWARE_REVISION="build date: Di 29. Jan 19:33:34 CET 2013"
> > +    #OPENWRT_CORE_REVISION="35298"
> > +    #OPENWRT_FEEDS_PACKAGES_REVISION="35298"
> > +	#. /etc/firmware_release
> > +	
SYSTEM_DATA="<status>online</status><hostname>$hostname</hostname><distn
> > ame>$distname</distname><distversion>$distversion</distversion>$cpu$memory
> > $load$uptime<local_time>$local_time</local_time><batman_advanced_version>$
> > batman_adv_version</batman_advanced_version><kernel_version>$kernel_versio
> > n</kernel_version><fastd_version>$fastd_version</fastd_version><nodewatche
> > r_version>$nodewatcher_version</nodewatcher_version><firmware_version>$FIR
> > MWARE_VERSION</firmware_version><firmware_revision>$FIRMWARE_REVISION</fir
> > mware_revision><openwrt_core_revision>$OPENWRT_CORE_REVISION</openwrt_core
> > _revision><openwrt_feeds_packages_revision>$OPENWRT_FEEDS_PACKAGES_REVISIO
> > N</openwrt_feeds_packages_revision>" +
> > +    err "`date`: Collecting information from network interfaces"
> > +
> > +	#Get interfaces
> > +	#IFACES=`cat /proc/net/dev | awk -F: '!/\|/ { gsub(/[[:space:]]*/, 
"",
> > $1); split($2, a, " "); printf("%s=%s=%s ", $1, a[1], a[9]) }'` +
> > +	interface_data=""
> > +	#Loop interfaces
> > +	#for entry in $IFACES; do
> > +    for filename in `grep 'up\|unknown' /sys/class/net/*/operstate`; do
> > +        ifpath=${filename%/operstate*}
> > +        iface=${ifpath#/sys/class/net/}
> > +		if [ "$iface" = "lo" ]; then
> > +            continue
> > +        fi
> > +
> > +        #Get interface data
> > +        addrs="$(ip addr show dev ${iface} | awk '
> > +            /ether/ { printf "<mac_addr>"$2"</mac_addr>" }
> > +            /inet / { split($2, a, "/"); printf
> > "<ipv4_addr>"a[1]"</ipv4_addr>" } +            /inet6/ && /scope global/
> > { printf "<ipv6_addr>"$2"</ipv6_addr>" } +            /inet6/ && /scope
> > link/ { printf "<ipv6_link_local_addr>"$2"</ipv6_link_local_addr>"} +    
> >        /mtu/ { printf "<mtu>"$5"</mtu>" }
> > +        ')"
> > +        #mac_addr="`cat $ifpath/address`"
> > +        #ipv4_addr="`ip addr show dev ${iface} | awk '/inet / { split($2,
> > a, "/"); print a[1] }'`" +        #ipv6_addr="`ip addr show dev ${iface}
> > scope global | awk '/inet6/ { print $2 }'`" +       
> > #ipv6_link_local_addr="`ip addr show dev ${iface} scope link | awk
> > '/inet6/ { print $2 }'`" +        #mtu=`cat $ifpath/mtu`
> > +        traffic_rx=`cat $ifpath/statistics/rx_bytes`
> > +        traffic_tx=`cat $ifpath/statistics/tx_bytes`
> > +
> > +       
> > #interface_data=$interface_data"<$iface><name>$iface</name><mac_addr>$mac
> > _addr</mac_addr><ipv4_addr>$ipv4_addr</ipv4_addr><ipv6_addr>$ipv6_addr</ip
> > v6_addr><ipv6_link_local_addr>$ipv6_link_local_addr</ipv6_link_local_addr>
> > <traffic_rx>$traffic_rx</traffic_rx><traffic_tx>$traffic_tx</traffic_tx><m
> > tu>$mtu</mtu>" +       
> > interface_data=$interface_data"<$iface><name>$iface</name>$addrs<traffic_
> > rx>$traffic_rx</traffic_rx><traffic_tx>$traffic_tx</traffic_tx>" +
> > +
> > +        interface_data=$interface_data$(iwconfig ${iface} 2>/dev/null |
> > awk -F':' ' +            /Mode/{ split($2, m, " "); printf
> > "<wlan_mode>"m[1]"</wlan_mode>" } +            /Cell/{ split($0, c, " ");
> > printf "<wlan_bssid>"c[5]"</wlan_bssid>" } +            /ESSID/ {
> > split($0, e, "\""); printf "<wlan_essid>"e[2]"</wlan_essid>" } +         
> >   /Freq/{ split($3, f, " "); printf
> > "<wlan_frequency>"f[1]f[2]"</wlan_frequency>" } +            /Tx-Power/{
> > split($0, p, "="); sub(/[[:space:]]*$/, "", p[2]); printf
> > "<wlan_tx_power>"p[2]"</wlan_tx_power>" } +        ')"</$iface>"
> > +
> > +        #if [ "`iwconfig ${iface} 2>/dev/null | grep IEEE`" != "" ]; then
> > +        #    wlan_mode="`iwconfig $iface | awk -F':' '/Mode/{ split($2,
> > m, " "); print m[1] }'`" +        #
> > +        #    if [ $wlan_mode = "Master" ]; then
> > +        #        wlan_bssid="`iw $iface info | awk '/addr/{ print $2 }'`"
> > +        #    elif [ $wlan_mode = "Ad-Hoc" ]; then
> > +        #        wlan_bssid="`iwconfig $iface | awk '/Cell/{ print $5
> > }'`"
> > +        #    fi
> > +        #
> > +        #    wlan_essid="`iwconfig ${iface} | awk -F'"' '/ESSID/ { print
> > $2 }'`" +        #    wlan_frequency="`iwconfig $iface | awk -F':'
> > '/Freq/{ split($3, f, " "); print f[1] }'`" +        #   
> > wlan_tx_power="`iwconfig $iface | awk -F'=' '/Tx-Power/{ print $2 }'`" + 
> >       #
> > +        #   
> > interface_data=$interface_data"<wlan_mode>$wlan_mode</wlan_mode><wlan_fre
> > quency>$wlan_frequency</wlan_frequency><wlan_essid>$wlan_essid</wlan_essid
> > ><wlan_bssid>$wlan_bssid</wlan_bssid><wlan_tx_power>$wlan_tx_power</wlan_t
> > x_power>" +        #fi
> > +        #interface_data=$interface_data"</$iface>"
> > +	done
> > +
> > +    err "`date`: Collecting information from batman advanced and it´s
> > interfaces" +	#B.A.T.M.A.N. advanced
> > +    if [ -f /sys/module/batman_adv/version ]; then
> > +        for iface in $(grep active
> > /sys/class/net/*/batman_adv/iface_status); do +           
> > status=${iface#*:}
> > +            iface=${iface%/batman_adv/iface_status:active}
> > +            iface=${iface#/sys/class/net/}
> > +           
> > BATMAN_ADV_INTERFACES=$BATMAN_ADV_INTERFACES"<$iface><name>$iface</name><
> > status>$status</status></$iface>" +        done
> > +
> > +        batman_adv_originators=$(awk \
> > +            'BEGIN { FS=" "; i=0 }
> > +            /O/ { next }
> > +            /B/ { next }
> > +            {   sub("\\(", "", $0)
> > +                sub("\\)", "", $0)
> > +                sub("\\[", "", $0)
> > +                sub("\\]:", "", $0)
> > +                sub("  ", " ", $0)
> > +                printf
> > "<originator_"i"><originator>"$1"</originator><link_quality>"$3"</link_qu
> > ality><nexthop>"$4"</nexthop><last_seen>"$2"</last_seen><outgoing_interfac
> > e>"$5"</outgoing_interface></originator_"i">" +                i++
> > +            }' /sys/kernel/debug/batman_adv/bat0/originators)
> > +
> > +		batman_adv_gateway_mode=$(batctl gw)
> > +
> > +		batman_adv_gateway_list=$(awk \
> > +			'BEGIN { FS=" "; i=0 }
> > +			/Gateway/ { next }
> > +			/No gateways/ { next }
> > +			{	sub("=>", "true", $0)
> > +				sub("  ", "false", $0)
> > +				sub("\\(", "", $0)
> > +				sub("\\)", "", $0)
> > +				sub("\\[", "", $0)
> > +				sub("\\]:", "", $0)
> > +				sub("  ", " ", $0)
> > +				printf
> > "<gateway_"i"><selected>"$1"</selected><gateway>"$2"</gateway><link_quali
> > ty>"$3"</link_quality><nexthop>"$4"</nexthop><outgoing_interface>"$5"</out
> > going_interface><gw_class>"$6" "$7" "$8"</gw_class></gateway_"i">"
> > +				i++
> > +			}' /sys/kernel/debug/batman_adv/bat0/gateways)
> > +    fi
> > +    err "`date`: Collecting information about conected clients"
> > +	#CLIENTS
> > +
> > +    client_count=$(batctl tl | tail -n+3 | grep -v -e "^[ ]*\*" | wc -l)
> > +
> > +    err "`date`: Putting all information into a XML-File and save it at
> > "$SCRIPT_DATA_FILE +
> > +	DATA="<?xml version='1.0'
> > standalone='yes'?><data><system_data>$SYSTEM_DATA</system_data><interface
> > _data>$interface_data</interface_data><batman_adv_interfaces>$BATMAN_ADV_I
> > NTERFACES</batman_adv_interfaces><batman_adv_originators>$batman_adv_origi
> > nators</batman_adv_originators><batman_adv_gateway_mode>$batman_adv_gatewa
> > y_mode</batman_adv_gateway_mode><batman_adv_gateway_list>$batman_adv_gatew
> > ay_list</batman_adv_gateway_list><client_count>$client_count</client_count
> > ></data>" +
> > +	#write data to hxml file that provides the data on httpd
> > +	echo $DATA | gzip > $SCRIPT_DATA_FILE
> > +}
> > +
> > +LANG=C
> > +
> > +#Prüft ob das logfile zu groß geworden ist
> > +err "`date`: Check logfile"
> > +delete_log
> > +
> > +#Erzeugt die statusdaten
> > +err "`date`: Generate actual status data"
> > +crawl
> > +
> > +exit 0
> 
> Tim Niemeyer
-------------- nächster Teil --------------
Ein Dateianhang mit Binärdaten wurde abgetrennt...
Dateiname   : signature.asc
Dateityp    : application/pgp-signature
Dateigröße  : 819 bytes
Beschreibung: This is a digitally signed message part.
URL         : <http://lists.freifunk.net/pipermail/franken-dev-freifunk.net/attachments/20150721/67b0ee95/attachment-0002.sig>


Mehr Informationen über die Mailingliste franken-dev