[PATCH 20/20] - fixed tabs vs. spaces mix-up by using only spaces
Tim Niemeyer
tim.niemeyer at mastersword.de
Do Jul 16 20:06:36 CEST 2015
Hi Steffen
Das File ist wirklich durcheinander. Dein Ansatz aufzuräumen finde ich
sehr gut. Mir persönlich ist auch egal ob Tab oder Spaces. Beim Reviewen
ist mit das "<<-EOF" untergekommen, für den Ansatz wären Tabs
sinnvoller.
Wie es auch sein mag, es sollte dann mit der Modeline gleichgesetzt
werden.
Bitte fixe noch die Modeline, oder stell auf Tabs um (wäre für <<-EOF
cool).
Am Mittwoch, den 15.07.2015, 21:48 +0200 schrieb Steffen Pankratz:
> Signed-off-by: Steffen Pankratz <kratz00 at gmx.de>
> ---
> buildscript | 603 ++++++++++++++++++++++++++++++------------------------------
> 1 file changed, 301 insertions(+), 302 deletions(-)
>
> diff --git a/buildscript b/buildscript
> index cce124a..ba8b48b 100755
> --- a/buildscript
> +++ b/buildscript
> @@ -36,346 +36,345 @@ FASTD_PKGS="fastd"
> FEEDS=(OPENWRT OPENWRT_OLDPACKAGES ROUTING FASTD)
>
> checkout_git(){
> - local DIRECTORY=$1
> - local REPO_URL=$2
> - local COMMITID=$3
> -
> - local MYGIT="git -C $DIRECTORY"
> - echo "checking out $REPO_URL to $DIRECTORY in version $COMMITID"
> - if [ -d "$DIRECTORY" ]; then
> - if $MYGIT remote -v | grep -q "$REPO_URL" ; then
> - echo "Right remote detected"
> - if ! $MYGIT checkout "$COMMITID" ; then
> - echo "commitid not found trying to fetch new commits"
> - $MYGIT pull && $MYGIT checkout "$COMMITID"
> - fi
> - else
> - echo "wrong remote or not an git repo at all -\> deleting whole directory"
> - /bin/rm -rf "$DIRECTORY"
> - #needs to be without -C!!!
> - git clone "$REPO_URL" "$DIRECTORY"
> - $MYGIT checkout "$COMMITID"
> - fi
> - else
> - echo "We need to do a fresh checkout"
> - #needs to be without -C!!!
> - git clone "$REPO_URL" "$DIRECTORY"
> - $MYGIT checkout "$COMMITID"
> - fi
> + local DIRECTORY=$1
> + local REPO_URL=$2
> + local COMMITID=$3
> +
> + local MYGIT="git -C $DIRECTORY"
> + echo "checking out $REPO_URL to $DIRECTORY in version $COMMITID"
> + if [ -d "$DIRECTORY" ]; then
> + if $MYGIT remote -v | grep -q "$REPO_URL" ; then
> + echo "Right remote detected"
> + if ! $MYGIT checkout "$COMMITID" ; then
> + echo "commitid not found trying to fetch new commits"
> + $MYGIT pull && $MYGIT checkout "$COMMITID"
> + fi
> + else
> + echo "wrong remote or not an git repo at all -\> deleting whole directory"
> + /bin/rm -rf "$DIRECTORY"
> + #needs to be without -C!!!
> + git clone "$REPO_URL" "$DIRECTORY"
> + $MYGIT checkout "$COMMITID"
> + fi
> + else
> + echo "We need to do a fresh checkout"
> + #needs to be without -C!!!
> + git clone "$REPO_URL" "$DIRECTORY"
> + $MYGIT checkout "$COMMITID"
> + fi
> }
>
> get_source() {
> - test -d src || mkdir src
> - cd src
> -
> - #Get the OpenWrt Core Source for Firmware
> - checkout_git openwrt $OPENWRTURL $OPENWRTREV
> -
> - test -d packages || mkdir packages
> - cd packages
> -
> - #checkout needed package feeds
> - for FEEDVAR in "${FEEDS[@]}" ; do
> - FEED=( $(eval echo \${"$FEEDVAR"[@]}) )
> -
> - local NAME=${FEED[0]}
> - local URL=${FEED[1]}
> - local REV=${FEED[2]}
> - local PATCH=${FEED[3]}
> -
> - checkout_git "$NAME" "$URL" "$REV"
> - # Patches for feeds could be stored in known directories like build_patches/$NAME/
> - # That way multiple patches for one feed could be supported
> - if [ ! -z "$PATCH" ] ; then
> - echo "Patching $PATCH"
> - git -C "$NAME" am --whitespace=nowarn "$PATCH"
> - fi
> - done
> -
> - cd .. # packages
> - cd .. # src
> + test -d src || mkdir src
> + cd src
> +
> + #Get the OpenWrt Core Source for Firmware
> + checkout_git openwrt $OPENWRTURL $OPENWRTREV
> +
> + test -d packages || mkdir packages
> + cd packages
> +
> + #checkout needed package feeds
> + for FEEDVAR in "${FEEDS[@]}" ; do
> + FEED=( $(eval echo \${"$FEEDVAR"[@]}) )
> +
> + local NAME=${FEED[0]}
> + local URL=${FEED[1]}
> + local REV=${FEED[2]}
> + local PATCH=${FEED[3]}
> +
> + checkout_git "$NAME" "$URL" "$REV"
> + # Patches for feeds could be stored in known directories like build_patches/$NAME/
> + # That way multiple patches for one feed could be supported
> + if [ ! -z "$PATCH" ] ; then
> + echo "Patching $PATCH"
> + git -C "$NAME" am --whitespace=nowarn "$PATCH"
> + fi
> + done
> +
> + cd .. # packages
> + cd .. # src
> }
>
> prepare() {
> - get_source
> + get_source
>
> - test -d $builddir || mkdir $builddir
> + test -d $builddir || mkdir $builddir
>
> - /bin/rm -rf "$target"
> - cp -a src/openwrt "$target"
> + /bin/rm -rf "$target"
> + cp -a src/openwrt "$target"
>
> - ## generate own feeds.conf
> - #this local variable should be globally configure variable used in get_source and here
> - local PACKAGEBASE=${PWD}/src/packages
> - rm -f "$target"/feeds.conf
> - for FEEDVAR in "${FEEDS[@]}" ; do
> - FEED=( $(eval echo \${"$FEEDVAR"[@]}) )
> - local NAME=${FEED[0]}
> - echo "adding $NAME to package feeds"
> - echo src-link "$NAME" "$PACKAGEBASE"/"$NAME" >> "$target"/feeds.conf
> - done
> + ## generate own feeds.conf
> + #this local variable should be globally configure variable used in get_source and here
> + local PACKAGEBASE=${PWD}/src/packages
> + rm -f "$target"/feeds.conf
> + for FEEDVAR in "${FEEDS[@]}" ; do
> + FEED=( $(eval echo \${"$FEEDVAR"[@]}) )
> + local NAME=${FEED[0]}
> + echo "adding $NAME to package feeds"
> + echo src-link "$NAME" "$PACKAGEBASE"/"$NAME" >> "$target"/feeds.conf
> + done
>
> - echo "cleaning feeds"
> - /bin/rm -rf "$target"/feeds
> + echo "cleaning feeds"
> + /bin/rm -rf "$target"/feeds
>
> - "$target"/scripts/feeds update
> + "$target"/scripts/feeds update
>
> - for FEEDVAR in "${FEEDS[@]}" ; do
> - FEED=( $(eval echo \${"$FEEDVAR"[@]}) )
> - local NAME=${FEED[0]}
> - local PACKAGESVAR=( $(eval echo \${"$FEEDVAR"_PKGS[@]}) )
> + for FEEDVAR in "${FEEDS[@]}" ; do
> + FEED=( $(eval echo \${"$FEEDVAR"[@]}) )
> + local NAME=${FEED[0]}
> + local PACKAGESVAR=( $(eval echo \${"$FEEDVAR"_PKGS[@]}) )
>
> - if [[ -n "${PACKAGESVAR[@]}" ]] ; then
> - echo "adding ${PACKAGESVAR[*]} from feed $NAME to available packages"
> - "$target"/scripts/feeds install -p "$NAME" "${PACKAGESVAR[@]}"
> - fi
> - done
> + if [[ -n "${PACKAGESVAR[@]}" ]] ; then
> + echo "adding ${PACKAGESVAR[*]} from feed $NAME to available packages"
> + "$target"/scripts/feeds install -p "$NAME" "${PACKAGESVAR[@]}"
> + fi
> + done
>
> - # todo evaluate this with the new openwrt
> - # This changes the default behavior of sysupgrade to not save the config
> - patch -p0 -d "$target" -i "$PWD"/build_patches/sysupgrade_no_config_save.patch
> + # todo evaluate this with the new openwrt
> + # This changes the default behavior of sysupgrade to not save the config
> + patch -p0 -d "$target" -i "$PWD"/build_patches/sysupgrade_no_config_save.patch
>
> - #saves ~200MB for each build
> - test -d ./src/dl || mkdir ./src/dl
> - ln -s ../../src/dl "$target"/dl
> + #saves ~200MB for each build
> + test -d ./src/dl || mkdir ./src/dl
> + ln -s ../../src/dl "$target"/dl
>
> - board_prepare
> + board_prepare
> }
>
> prebuild() {
> - #create filesdir for our config
> - /bin/rm -rf "$target"/files
> - mkdir "$target"/files
> -
> - cp -r ./bsp/default/root_file_system/* "$target"/files/
> - cp -r ./bsp/"$machine"/root_file_system/* "$target"/files/
> - cp ./bsp/"$machine"/.config "$target"/.config
> -
> - arch=$(awk -F= '/^CONFIG_TARGET_BOARD/{print gsub(/"/,"",$2); print $2;}' ./bsp/"$machine"/.config)
> - version=$(awk '/^CONFIG_LINUX/ { sub(/CONFIG_LINUX_/,""); sub(/=y/,""); gsub(/_/,"."); print; }' ./bsp/"$machine"/.config)
> - test -f ./bsp/"$machine"/.kernelconfig-"$version" && \
> - cp ./bsp/"$machine"/.kernelconfig-"$version" \
> - "$target"/target/linux/"$arch"/config-"$version"
> -
> - board_prebuild
> -
> - shopt -s globstar nullglob
> - for template in $target/files/**/*.tpl
> - do
> - echo "Translating $template .."
> - $tpl_translate "$template" > "$(dirname "$template")"/"$(basename "$template" .tpl)"
> - /bin/rm "$template"
> - done
> -
> - #insert actual firware version informations into release file
> - version=$(git describe --tags --dirty)
> -
> - {
> - echo "FIRMWARE_VERSION=\"$version\""
> - echo "BUILD_DATE=\"$(date)\""
> - echo "OPENWRT_CORE_REVISION=\"${OPENWRTREV}\""
> - echo "OPENWRT_FEEDS_PACKAGES_REVISION=\"${PACKAGEREV}\""
> - } >> "$target"/files/etc/firmware_release
> + #create filesdir for our config
> + /bin/rm -rf "$target"/files
> + mkdir "$target"/files
> +
> + cp -r ./bsp/default/root_file_system/* "$target"/files/
> + cp -r ./bsp/"$machine"/root_file_system/* "$target"/files/
> + cp ./bsp/"$machine"/.config "$target"/.config
> +
> + arch=$(awk -F= '/^CONFIG_TARGET_BOARD/{print gsub(/"/,"",$2); print $2;}' ./bsp/"$machine"/.config)
> + version=$(awk '/^CONFIG_LINUX/ { sub(/CONFIG_LINUX_/,""); sub(/=y/,""); gsub(/_/,"."); print; }' ./bsp/"$machine"/.config)
> + test -f ./bsp/"$machine"/.kernelconfig-"$version" && \
> + cp ./bsp/"$machine"/.kernelconfig-"$version" \
> + "$target"/target/linux/"$arch"/config-"$version"
> +
> + board_prebuild
> +
> + shopt -s globstar nullglob
> + for template in $target/files/**/*.tpl
> + do
> + echo "Translating $template .."
> + $tpl_translate "$template" > "$(dirname "$template")"/"$(basename "$template" .tpl)"
> + /bin/rm "$template"
> + done
> +
> + #insert actual firware version informations into release file
> + version=$(git describe --tags --dirty)
> +
> + {
> + echo "FIRMWARE_VERSION=\"$version\""
> + echo "BUILD_DATE=\"$(date)\""
> + echo "OPENWRT_CORE_REVISION=\"${OPENWRTREV}\""
> + echo "OPENWRT_FEEDS_PACKAGES_REVISION=\"${PACKAGEREV}\""
> + } >> "$target"/files/etc/firmware_release
> }
>
> build() {
> - prebuild
> -
> - opath=$(pwd)
> - cd "$target"
> - cpus=$(grep -c processor /proc/cpuinfo)
> -
> - case "$1" in
> - "debug")
> - make V=99
> - ;;
> - "fast")
> - ionice -c 2 -- nice -n 1 -- make -j $((cpus*2))
> - ;;
> - *)
> - ionice -c 3 -- nice -n 10 -- make -j $((cpus+1))
> - ;;
> - esac
> -
> - cd "$opath"
> -
> - if [ ! -d bin ]; then
> - mkdir bin
> - fi
> -
> - postbuild
> + prebuild
> +
> + opath=$(pwd)
> + cd "$target"
> + cpus=$(grep -c processor /proc/cpuinfo)
> +
> + case "$1" in
> + "debug")
> + make V=99
> + ;;
> + "fast")
> + ionice -c 2 -- nice -n 1 -- make -j $((cpus*2))
> + ;;
> + *)
> + ionice -c 3 -- nice -n 10 -- make -j $((cpus+1))
> + ;;
> + esac
> +
> + cd "$opath"
> +
> + if [ ! -d bin ]; then
> + mkdir bin
> + fi
> +
> + postbuild
> }
>
> config() {
> - prebuild
> -
> - opath=$(pwd)
> - cd "$target"
> -
> - case "$1" in
> - "openwrt")
> - make menuconfig
> - ;;
> - "kernel")
> - make kernel_menuconfig
> - ;;
> - esac
> -
> - cd "$opath"
> -
> - save=""
> - until [ "$save" = "y" -o "$save" = "n" ]; do
> - echo "Do you want to save the generated config? (y/n)"
> - read save
> - done
> -
> - if [ "$save" = "y" ]; then
> - case "$1" in
> - "openwrt")
> - grep '^CON\|^# CON' "$target"/.config | sort > ./bsp/"$machine"/.config
> - ;;
> - "kernel")
> - arch=$(awk -F= '/^CONFIG_TARGET_BOARD/{gsub(/"/,"",$2); print $2;}' ./bsp/"$machine"/.config)
> - version=$(awk '/^CONFIG_LINUX/ { sub(/CONFIG_LINUX_/,""); sub(/=y/,""); gsub(/_/,"."); print; }' ./bsp/"$machine"/.config)
> - grep '^CON\|^# CON' "$target"/target/linux/"$arch"/config-"$version" | sort > ./bsp/"$machine"/.kernelconfig-"$version"
> - ;;
> - esac
> - fi
> + prebuild
> +
> + opath=$(pwd)
> + cd "$target"
> +
> + case "$1" in
> + "openwrt")
> + make menuconfig
> + ;;
> + "kernel")
> + make kernel_menuconfig
> + ;;
> + esac
> +
> + cd "$opath"
> +
> + save=""
> + until [ "$save" = "y" -o "$save" = "n" ]; do
> + echo "Do you want to save the generated config? (y/n)"
> + read save
> + done
> +
> + if [ "$save" = "y" ]; then
> + case "$1" in
> + "openwrt")
> + grep '^CON\|^# CON' "$target"/.config | sort > ./bsp/"$machine"/.config
> + ;;
> + "kernel")
> + arch=$(awk -F= '/^CONFIG_TARGET_BOARD/{gsub(/"/,"",$2); print $2;}' ./bsp/"$machine"/.config)
> + version=$(awk '/^CONFIG_LINUX/ { sub(/CONFIG_LINUX_/,""); sub(/=y/,""); gsub(/_/,"."); print; }' ./bsp/"$machine"/.config)
> + grep '^CON\|^# CON' "$target"/target/linux/"$arch"/config-"$version" | sort > ./bsp/"$machine"/.kernelconfig-"$version"
> + ;;
> + esac
> + fi
> }
>
> postbuild() {
> - board_postbuild
> + board_postbuild
> }
>
> clean() {
> - board_clean
> - /bin/rm -rf bin $builddir
> + board_clean
> + /bin/rm -rf bin $builddir
> }
>
> buildall() {
> - for bsp in $(/bin/ls bsp/*.bsp); do
> - ./buildscript selectcommunity "$1"
> - ./buildscript selectbsp "$bsp"
> - ./buildscript prepare
> - ./buildscript build "$2"
> - done
> + for bsp in $(/bin/ls bsp/*.bsp); do
> + ./buildscript selectcommunity "$1"
> + ./buildscript selectbsp "$bsp"
> + ./buildscript prepare
> + ./buildscript build "$2"
> + done
> }
>
> if [ "$1" != "selectbsp" -a "$1" != "selectcommunity" -a "$1" != "buildall" ]; then
> - if [ ! -h selected_bsp ]; then
> - echo "Please select a Board-Support-Package using:"
> - echo "$0 selectbsp"
> - exit
> - fi
> - if [ ! -h selected_community ]; then
> - echo "Please select a community file using:"
> - echo "$0 selectcommunity"
> - exit
> - fi
> - echo "Working with $(/bin/ls -l selected_bsp | awk '{ print $11 }') and" \
> - "$(/bin/ls -l selected_community | awk '{ print $11 }')"
> - . selected_bsp
> - tpl_translate=$(awk -F= 'BEGIN{printf("sed")} /^.+$/{gsub("/", "\\/", $0); printf(" -es/\\${%s}/%s/g",$1,$2)}' selected_community)
> - echo
> + if [ ! -h selected_bsp ]; then
> + echo "Please select a Board-Support-Package using:"
> + echo "$0 selectbsp"
> + exit
> + fi
> + if [ ! -h selected_community ]; then
> + echo "Please select a community file using:"
> + echo "$0 selectcommunity"
> + exit
> + fi
> + echo "Working with $(/bin/ls -l selected_bsp | awk '{ print $11 }') and" \
> + "$(/bin/ls -l selected_community | awk '{ print $11 }')"
> + . selected_bsp
> + tpl_translate=$(awk -F= 'BEGIN{printf("sed")} /^.+$/{gsub("/", "\\/", $0); printf(" -es/\\${%s}/%s/g",$1,$2)}' selected_community)
> + echo
> fi
>
> case "$1" in
> - "selectbsp")
> - if [ "$2" = "help" ] || [ "$2" = "" ]; then
> - echo "Select a Board-Support-Package:"
> - echo
> - echo "Usage: $0 $1 bsp"
> - echo "available packages:"
> - /bin/ls bsp/*.bsp
> - else
> - if [ ! -f "$2" ]; then
> - echo "Could not find $2"
> - else
> - /bin/rm -rf selected_bsp
> - /bin/ln -s "$2" selected_bsp
> - fi
> - fi
> - ;;
> - "selectcommunity")
> - if [ "$2" = "help" ] || [ "$2" = "" ]; then
> - echo "Select a Community-File:"
> - echo
> - echo "Usage: $0 $1 community.cfg"
> - echo "community.cfg: "
> - /bin/ls community/*.cfg
> - else
> - if [ ! -f "$2" ]; then
> - echo "Could not find $2"
> - else
> - /bin/rm -rf selected_community
> - /bin/ln -s "$2" selected_community
> - fi
> - fi
> - ;;
> - "prepare")
> - if [ "$2" = "help" ] || [ "$2" = "x" ]; then
> - echo "This option fetches the sources for the images and configurates the build so that it can be compiled"
> - echo "Usage: $0 $1"
> - else
> - prepare
> - fi
> - ;;
> - "build")
> - if [ "$2" = "help" ] || [ "$2" = "x" ]; then
> - echo "This option compiles the firmware"
> - echo "Normaly the build uses lower IO and System priorities, "
> - echo "you can append \"fast\" option, to use normal user priorities"
> - echo "Usage: $0 $1 [fast|debug]"
> - else
> - build "$2"
> - fi
> - ;;
> - "config")
> - case "$2" in
> - openwrt)
> - config openwrt
> - ;;
> - kernel)
> - config kernel
> - ;;
> - *)
> - echo "This open the OpenWRT menuconfig dialog"
> - echo
> - echo "Usage: $0 $1 openwrt|kernel"
> - ;;
> - esac
> - ;;
> - "clean")
> - if [ "$2" = "help" ] || [ "$2" = "x" ]; then
> - echo "This option cleans all build files."
> - echo "$0 $1"
> - else
> - clean
> - fi
> - ;;
> - "buildall")
> - if [ "$2" = "help" ] || [ "$2" = "" ]; then
> - echo "This option builds the firmware for all routers of a given community."
> - echo "Usage: $0 $1 community.cfg [fast]"
> - echo "community.cfg: "
> - /bin/ls community/*.cfg
> - else
> - buildall "$2" "$3"
> - fi
> - ;;
> - *)
> - echo "This is the Build Environment Script of the Freifunk Community Franken."
> - echo "Usage: $0 command"
> - echo "command:"
> - echo " selectcommunity [communityfile]"
> - echo " selectbsp [bsp file]"
> - echo " prepare"
> - echo " config <openwrt|kernel>"
> - echo " build [<fast|debug>]"
> - echo " buildall <community> [<fast>]"
> - echo " clean"
> - echo ""
> - echo "If you need help to one of these options just type $0 command help"
> - ;;
> + "selectbsp")
> + if [ "$2" = "help" ] || [ "$2" = "" ]; then
> + echo "Select a Board-Support-Package:"
> + echo
> + echo "Usage: $0 $1 bsp"
> + echo "available packages:"
> + /bin/ls bsp/*.bsp
> + else
> + if [ ! -f "$2" ]; then
> + echo "Could not find $2"
> + else
> + /bin/rm -rf selected_bsp
> + /bin/ln -s "$2" selected_bsp
> + fi
> + fi
> + ;;
> + "selectcommunity")
> + if [ "$2" = "help" ] || [ "$2" = "" ]; then
> + echo "Select a Community-File:"
> + echo
> + echo "Usage: $0 $1 community.cfg"
> + echo "community.cfg: "
> + /bin/ls community/*.cfg
> + else
> + if [ ! -f "$2" ]; then
> + echo "Could not find $2"
> + else
> + /bin/rm -rf selected_community
> + /bin/ln -s "$2" selected_community
> + fi
> + fi
> + ;;
> + "prepare")
> + if [ "$2" = "help" ] || [ "$2" = "x" ]; then
> + echo "This option fetches the sources for the images and configurates the build so that it can be compiled"
> + echo "Usage: $0 $1"
> + else
> + prepare
> + fi
> + ;;
> + "build")
> + if [ "$2" = "help" ] || [ "$2" = "x" ]; then
> + echo "This option compiles the firmware"
> + echo "Normaly the build uses lower IO and System priorities, "
> + echo "you can append \"fast\" option, to use normal user priorities"
> + echo "Usage: $0 $1 [fast|debug]"
> + else
> + build "$2"
> + fi
> + ;;
> + "config")
> + case "$2" in
> + openwrt)
> + config openwrt
> + ;;
> + kernel)
> + config kernel
> + ;;
> + *)
> + echo "This open the OpenWRT menuconfig dialog"
> + echo
> + echo "Usage: $0 $1 openwrt|kernel"
> + ;;
> + esac
> + ;;
> + "clean")
> + if [ "$2" = "help" ] || [ "$2" = "x" ]; then
> + echo "This option cleans all build files."
> + echo "$0 $1"
> + else
> + clean
> + fi
> + ;;
> + "buildall")
> + if [ "$2" = "help" ] || [ "$2" = "" ]; then
> + echo "This option builds the firmware for all routers of a given community."
> + echo "Usage: $0 $1 community.cfg [fast]"
> + echo "community.cfg: "
> + /bin/ls community/*.cfg
> + else
> + buildall "$2" "$3"
> + fi
> + ;;
> + *)
> + echo "This is the Build Environment Script of the Freifunk Community Franken."
> + echo "Usage: $0 command"
> + echo "command:"
> + echo " selectcommunity [communityfile]"
> + echo " selectbsp [bsp file]"
> + echo " prepare"
> + echo " config <openwrt|kernel>"
> + echo " build [<fast|debug>]"
> + echo " buildall <community> [<fast>]"
> + echo " clean"
> + echo ""
> + echo "If you need help to one of these options just type $0 command help"
> + ;;
> esac
> -# vim: noexpandtab
Wenn Stil Vorgaben machst, warum dann nicht auch gleich in die Modeline
kippen?
Hier wäre es:
# vim: expandtab
Tim
> --
> 2.4.5
>
-------------- nächster Teil --------------
Ein Dateianhang mit Binärdaten wurde abgetrennt...
Dateiname : signature.asc
Dateityp : application/pgp-signature
Dateigröße : 819 bytes
Beschreibung: This is a digitally signed message part
URL : <http://lists.freifunk.net/pipermail/franken-dev-freifunk.net/attachments/20150716/0c39a6c5/attachment-0002.sig>
Mehr Informationen über die Mailingliste franken-dev